Using the MOD Function

Can someone explain to me the syntax of the MOD function. In my Oracle9i book it states "The MOD function find the remainder of value1 divided by value2.
In a simple sql statement I ran from my test db. For the life of me I cannot see where any division takes place.
select employee_id, last_name, first_name, salary, mod(salary, 500)
from employees;
EMPLOYEE_ID LAST_NAME FIRST_NAME SALARY MOD(SALARY,500)
100 King Steven 24000 0
101 Kochhar Neena 17000 0
102 De Haan Lex 17000 0
103 Hunold Alexander 9000 0
104 Ernst Bruce 6000 0
105 Austin David 4800 300
106 Pataballa Valli 4800 300
107 Lorentz Diana 4200 200
108 Greenberg Nancy 12000 0
109 Faviet Daniel 9000 0
110 Chen John 8200 200
111 Sciarra Ismael 7700 200
112 Urman Jose Manuel 7800 300
113 Popp Luis 6900 400

user12130369 wrote:
In a simple sql statement I ran from my test db. For the life of me I cannot see where any division takes place.
select employee_id, last_name, first_name, salary, mod(salary, 500)
from employees;
EMPLOYEE_ID     LAST_NAME    FIRST_NAME      SALARY     MOD(SALARY,500) 
105                   Austin             David                 4800         300 
113                   Popp             Luis                   6900         400
For employee 105: 4800 / 500 = 9 remainder 300
For employee 113: 6900 / 500 = 13 remainder 400
Regards
Jonathan Lewis
http://jonathanlewis.wordpress.com
http://www.jlcomp.demon.co.uk
To post code, statspack/AWR report, execution plans or trace files, start and end the section with the tag {noformat}{noformat} (lowercase, curly brackets, no spaces) so that the text appears in fixed format.
"Science is more than a body of knowledge; it is a way of thinking"
Carl Sagan                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

Similar Messages

  • How to use the pps function from JCOP?

    Hi
    I'm trying to use the pps function from JCTerminal (JCOP API: [url http://www.cs.ru.nl/~woj/jcopapi/com/ibm/jc/JCTerminal.html#pps(int, int)]pps function ) to connect my client to a virtual card with a specific protocol (T=0).
    But I always got the error: "Protocol and parameter selection not supported by this terminal!"
    I've tried to make an ATR that support both protocol : [url http://smartcard-atr.appspot.com/parse?ATR=3b909580811fc7dc]3B 90 95 80 81 1F C7 DC.
    I really don't know what value to put in the second parameter (baud rate), I've tried with 150000, which is in the range of the ATR but I'm not sure this is correct. And I could't find any example of it.
    I'm also not sure where to put the pps command, the specification say directly after a reset, so I tried this implementation:
    System.out.print("Start");
              readers = TerminalFactory.getDefault().terminals().list(State.CARD_PRESENT);
              //If no readers has a card it ends the process
              if(readers.isEmpty()){
                   System.out.println("\nNo card in the reader...");
                   return;
              System.out.println("\nReader Type: "+readers.get(0).toString());
              term = (PCSCJCTerminal)JCTerminal.getInstance("PCSC", readers.get(0).toString().substring(15));
              term.open();
              System.out.println("\nTerminal opened");
              //Getting the ATR
              atr = new ATR(term.waitForCard(2000));
              try {
                   term.pps(JCTerminal.PROTOCOL_T0, (int)150000);
              } catch (Exception e) {
                   e.printStackTrace();
              System.out.println("ATR: "+toHex(atr.getBytes()));
              //sending a data 11223344
              System.out.println("\nsending data: 11223344");
              byte[] responsesend = term.send(0,cmdsend,0,cmdsend.length);
              System.out.println("Response data is:" + toHex(responsesend));
              //close terminal
              term.close();
              System.out.println("\nTerminal closed");I've got this output on the console:
    <font size="2">StartReader Type: PC/SC terminal Virtual CAD Reader 0
    Terminal opened
    ATR: 3b 90 95 90 00 81 1f c7 cc
    sending data: 11223344
    <font color="red">Protocol and parameter selection not supported by this terminal!</font>
         at com.ibm.jc.JCTerminal.pps(Unknown Source)
         at com.test.essai.main(essai.java:46)
    </font>>
    And If I take a look at the data exchanged with the card:
    <font size="2">Running in Virtual Card mode...
    ATR: 3B909580811FC7DC
    Waiting for event (power: off, protocol: unknown/undefined)...
    Waiting for event (power: off, protocol: unknown/undefined)...
    Raw event data: 01
    Event: VCAD_EC_POWER_ON (0x01)
    Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_POWER_ON) ATR: 3b909580811fc7dc
    Raw reply data: 003b909580811fc7dc
    Sending reply...
    Waiting for event (power: on, protocol: unknown/undefined)...
    Waiting for event (power: on, protocol: unknown/undefined)...
    Raw event data: 06ff11957b
    Event: VCAD_EC_EXCHANGE_TPDU (0x06) C-TPDU: ff11957b
    Accepting any PPS request parameters: Protocol: t=1; FI=9, DI=5
    Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_EXCHANGE_TPDU) R-TPDU: ff11957b
    Raw reply data: 00ff11957b
    Sending reply...
    </font>>
    This (above) is the PPS command but not from the PPS function, it is always sent with protocol T=1
    <font size="2">Waiting for event (power: on, protocol: t=1)...
    Raw event data: 0501
    Event: VCAD_EC_SET_PROTOCOL (0x05) Protocol: t=1
    Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_SET_PROTOCOL)
    Raw reply data: 00
    Sending reply...
    Waiting for event (power: on, protocol: t=1)...
    Raw event data: 0600c10120e0
    Event: VCAD_EC_EXCHANGE_TPDU (0x06) C-TPDU: 00c10120e0
    Handling protocol-specific command...
    Protocol block:
    NAD: 0x00
    PCB: 0xc1 (T1_S_BLOCK); S-Block type: T1_SBT_IFS_REQ
    LEN: 1
    INF:
    IFS: 20
    EDC: 0xe0
    Changing IFS(other) from 32 to 32
    Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_EXCHANGE_TPDU) R-TPDU: 00e10120c0
    Raw reply data: 0000e10120c0
    Sending reply...
    Waiting for event (power: on, protocol: t=1)...
    Raw event data: 0600001300a404000d54657374436c69656e7441707000f0
    Event: VCAD_EC_EXCHANGE_TPDU (0x06) C-TPDU: 00001300a404000d54657374436c69656e74
    41707000f0
    Processing app. command...
    App. block:
    NAD: 0x00
    PCB: 0x00 (T1_I_BLOCK); Seq. #: 0; More data: 0
    LEN: 13
    INF:
    00a404000d54657374436c69656e7441707000
    EDC: 0xf0
    cmd name: N/A (class #4)
    cmd: 00a40400 0d 54657374436c69656e74417070 70
    Responding with the reversed command data, SW is hardcoded to 90<INS>
    rsp: 707041746e65696c4374736554 90a4
    Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_EXCHANGE_TPDU) R-TPDU: 00000f70704
    1746e65696c437473655490a475
    Raw reply data: 0000000f707041746e65696c437473655490a475
    Sending reply...
    Waiting for event (power: on, protocol: t=1)...
    Raw event data: 060040041122334400
    Event: VCAD_EC_EXCHANGE_TPDU (0x06) C-TPDU: 0040041122334400
    Processing app. command...
    App. block:
    NAD: 0x00
    PCB: 0x40 (T1_I_BLOCK); Seq. #: 1; More data: 0
    LEN: 4
    INF:
    11223344
    EDC: 0x00
    cmd name: N/A (class #1)
    cmd: 11223344
    Responding with the reversed command data, SW is hardcoded to 90<INS>
    rsp: 9022
    Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_EXCHANGE_TPDU) R-TPDU: 0040029022f
    0
    Raw reply data: 000040029022f0
    Sending reply...
    Waiting for event (power: on, protocol: t=1)...
    Raw event data: 03
    Event: VCAD_EC_POWER_OFF (0x03)
    Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_POWER_OFF)
    Raw reply data: 00
    Sending reply...
    Waiting for event (power: off, protocol: unknown/undefined)...
    </font>>
    If someone know how to use this function or have any advice to help me to select a specific protocol with Jcop API, please let me know.
    If you you need any more information don't hesitate to ask.
    Best regards
    Edited by: Cyril on Sep 22, 2011 9:54 AM

    -1
    I'm using a virtual terminal (windows driver), and I don't see how I could turn off the Auto-pps. I've also tried with a real reader and a card and I have the same error.
    -2
    I've tried value in the range of the atr (based on this analysis: [url http://smartcard-atr.appspot.com/parse?ATR=3b909580811fc7dc]http://smartcard-atr.appspot.com/parse?ATR=3b909580811fc7dc ). But I don't know if only I value of baud-rate is possible in the range. Anyway I just would like to change the protocol, not the baud-rate.
    -3
    I've already tried to call pps function before, after the first reset, or with another reset later and I always got the same thing.
              term = (PCSCJCTerminal)JCTerminal.getInstance("PCSC", readers.get(0).toString().substring(15));
              term.open();
              System.out.println("\nTerminal opened");
              //Getting the ATR
              atr = new ATR(term.waitForCard(2000));
              System.out.println("ATR: "+toHex(atr.getBytes()));
              jcard = new JCard(term,atr,0);
              jcard.reset();          
              try {
                   term.pps(JCTerminal.PROTOCOL_T0, (int)312500);
              } catch (Exception e) {
                   e.printStackTrace();
              }The same pps is always send after each reset...

  • Using the SVDEx function in LabWindows​CVI

    Hello,
    I am writing an application in LabWindows CVI to display and analize data that we obtain in an optical experiment.  The data is a matrix where the subsequent rows represent spectra collected a different times. There are about 200 columns and 100 rows in each matrix. I want to use singular value decomposition using the  SVDEx function. I get an error every time i try to execute the code in debugguing mode:
    FATAL RUN-TIME ERROR:    The program has caused a 'General Protection' fault at 0x0342BC16.
    I believe that I am passing the incorrect arrays to SVDEx. I  was wondering if there is any example code available, so I can learn how tro do do this.
    Here is a fragment of the code where I call the function SVDEx:
    //declare the arrays to hold S U V
    double *U,*S,*V;
    int isizeS=Y_DATA_POINTS;
    int i;
    int AnalisisError=0;
    if (X_DATA_POINTS<Y_DATA_POINTS) {isizeS=X_DATA_POINTS;}
    //Allocate arrays
    U=malloc(Y_DATA_POINTS*X_DATA_POINTS*sizeof(double​));
    S=malloc(2*isizeS*sizeof(double));
    V=malloc(Y_DATA_POINTS*X_DATA_POINTS*sizeof(double​));
    AnalisisError = SVDEx (adAbsMap, Y_DATA_POINTS, X_DATA_POINTS, FULL_SIZE, U, S+isizeS, V);
    FATAL RUN-TIME ERROR:   "Visualize_12.c", line 2451, col 17, thread id 0x00000E18:   The program has caused a 'General Protection' fault at 0x0342BC16.
    Any help will be very much appreciated.
    J. Hodak

    Hi,
    Thanks for trying to find an answer. I just realized now where the probem was. My mistake was when i allocated the arrays for holding the matrices. Because i was assking SVDEx to carry out FUL SIZE decomposition I must declare the arrays U and V to be , Y_DATA_POINTS*, Y_DATA_POINTS doubles and X_DATA_POINTS*, X_DATA_POINTS doubles respectively. My code was wrong, I was declaring the sizes to be smaller than necessary and  "Visualize_12.c", line 2451, was the call to SVDEx, and col 17 was pointing t that mistake. It took me a while to realize this because the error message did not exlicitly specify that the size or the array passed was too small. Now it is working well. But I believe that it will help to have an example to get started with this.
    Thanks again,
    Fundadero.

  • Need help using the "skatter" function with brushes.

    I'm using Photoshop 7 right now. I want to use the scatter function with one of the standard brushes to make a star trail, but the problem is that the stars are too thick, there's too many of them. How do I tell it to draw less instances of the brush when I'm in scatter mode? So that it's only dropping 5 at a time or so?

    I have a control bar for "Master Diameter" but I can't find anything that says "spacing."

  • How do I remove an old username from the app store when using the update function

    How do I remove an old username from the app store when using the update function.
    I purchased my Mac used.  The former owners username prepopulates when I try to perform the updated function on the app store.  It does not allow me to use a different user name.    I have created my own username and password.  I have even been able to purchase items from the app store, it's just when I use the update function it does populate with my username.  Any help is appreciated.

    The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
    1. You don't own another Mac.
    If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
    If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
    To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
    If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
    2. You do own another Mac.
    If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
    Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
    After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
    Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
    If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
    If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to  authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.

  • Get a Report crashed error while running report using the mode character

    Hello,
    I'am getting an "Enable to run report - Report as crashde" issue only when I'am running reports using the mode character. The same report with desformat pdf never has any problems. I have changed the englife (set to one) increase the cachesize but I still have the same issue.
    I'm using report 6i and Oracle 8i.
    Thanks in advance for your help.
    Regards,
    Laurent.

    Hi Thanks for the response,
    In fact the report in character mode is working fine in my environnement but is not working on my customer environnement (which is supposed to be the same as mine). I was thinking of cache size issue or something like this ?
    Regards,
    Laurent.

  • How to use the Table Function defined  in package in OWB?

    Hi,
    I defined a table function in a package. I am trying to use that in owb using Table function operator. But I came to know that, owb R1 supports only standalone table functions.
    Is there any other way to use the table function defined in a package. As like we create synonyms for functions, is there any other way to do this.
    I tryed to create synonyms, it is created. But it is showing compilation error. Finally I found that, we can't create synonyms for functions which are defined in packages.
    Any one can explain it, how to resolve this problem.
    Thank you,
    Regards
    Gowtham Sen.

    Hi Marcos,
    Thank you for reply.
    OWB R1 supports stand alone table functions. Here what I mean is, the table fucntion which is not inculded in any package is a stand alone table function.
    for example say sample_tbl_fn is a table function. It is defined as a function.It is a stand alone function. We call this fucntion as "samp_tbl_fn()";
    For exampe say sample_pkg is a package. say a function is defined in a package.
    then we call that function as sample_pkg.functionname(); This is not a stand alone function.
    I hope you understand it.
    owb supports stand alone functions.
    Here I would like to know, is there any other way to use the functions which are defined in package. While I am trying to use those functions (which are defined in package -- giving the name as packagename.functionname) it is throwing an error "Invalid object name."
    Here I would like know, is there any other way to use the table functions which are defined in a package.
    Thank you,
    Regards,
    Gowtham Sen.

  • How do I use the print function to output a numeric variable with a fixed amount of leading zeroes

    I need to create an output from a T-SQL query that picks a numeric variable and uses the print function to output with leading zeroes if it is less than three characters long when converted to string.  For example if the variable is 12 the output should
    be 012 and if the variable is 3 the output should be 003.
    Presently the syntax I am using is PRINT STR(@CLUSTER,3) .  But if @CLUSTER which is numeric is less than three characters I get spaces in front.
    Please help!

    >> I need to create an output from a T-SQL query .. <<
    NO! NO! In RDBMS, we have a presentation layer that handles displays. We do not ever do it in the database. This is fundamental. But more than that, the purpose of PRINT is for debugging in T-SQL and never for output.
    You are still writing 1960's COBOL or BASIC, but you want to to it in SQL.  You probably picked the wrong data type (a numeric that should be a string) and are trying to repair your design error.  
    --CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
    in Sets / Trees and Hierarchies in SQL

  • TS1398 I have an iPad mini, because of my work network firewalls I am not able to use the airprint function to print. I was told you can direct connect to a printer. I am not sure how as I have not seen any cables for a lightning connection to a printer c

    I have an iPad mini, I am connected to my work wireless connection. My printer also is on the same wireless network, however I am not able to print to my airprint enabled printer through this wireless connection. Is there a way to direct connect to the printer via a cable ?
    I am missing something here on the connection. I am thinking possibly a firewall here at work will not allow me to use the airprint function. Help ?

    There is no support for wired printing.
    It is probably a firewall issue, possibly where all inbound communications are blocked. Since you're at work, I'd call your work IT department and find out from them what you can/can't do.

  • Does anyone know how to use the bcc functionality for apple mail while accessing it on the cloud from my PC?

    I am currently away from my MAC and want to send an email through apple mail with the bcc functionality.  I am using the cloud to get to my mail, however, I can't figure out how to use the BCC functionality, please help.  Thanks!

    Open your mail,
    lower left corner click on settings,
    go to composing and check BCC, save and your done

  • How to Use the language function for assignment and validation

    Hi All,
    If anyone can explain me in details with example ,how to use the language function for assignments and validations?
    Thanks
    Arnab

    Hi Arnab,
    The expression is checked only for the current MDM session.
    If u login with the ABC language it will always show the ABC language no matter how many times u execute it.
    Try connecting to the DM with the XYZ language.
    It should go to the if part rather than else.
    Hope it helps.
    Thanks,
    Minaz

  • How to use the CMS functionality in Sun Portal Server 7.2

    Hi All,
    How to use the CMS functionality using the ccd.war(Portlet) which is available in the library as i could add it to my channel but not able to show the functionality as it is showing the error msg "You are currently not logged in. Please login." should I create userid and there respective roles inorder to use the CMS functionality.
    Has any one used this as I could this in glass fish server.
    Any Input is appreciated.
    Thanks & regards
    Srikanth

    Have a look at the "*Roles*" section of the portal server 7.2 content management system guide
    http://docs.sun.com/source/820-4275/index.html . You can also look at [project mirage|https://mirage.dev.java.net] for some screencasts
    Alternatively,
    1. ccd.war has 3 portlets in it:
    (a) custom content definition portlet
    (b) custom content portlet
    (c) workflow portlet
    2. Inorder to work with these portlets, user needs to be in anyone of the below roles:
    (a)Consumer (b) Editor (c) Approver (d) Administrator (e) Submitter (f) Contributor (g) Publisher
    3. By default ccd.war gets deployed using a default roles file (/var/opt/SUNWportal/tmp/ccd.roles.properties)
    Note: In windows, you may not find this file
    4. Access the portlets as a user in any of the role mentioned in the ccd.roles.properties
    (OR)
    you can use a new roles file which has mapping to your custom roles. For this , undeploy existing ccd.war and deploy again with a new roles.properties file
    Hope this helps!

  • How to use the divide() function in bpel

    Hi All,
    How to use the divide() function in bpel.
    pls can u give the one sample example

    2 div 4
    Eg;
    <assign name="Assign_1">
    <copy>
    <from expression="2 div 4"/>
    <to variable="outputVariable" part="payload"
    query="/client:testProcessResponse/client:result"/>
    </copy>
    </assign>
    --Prasanna                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • How do I find out what year my MacBook Pro is?  I want to know if I can use the mirroring function with my Apple TV if I download Mountain Lion.

    I'm trying to find out if I can use the mirror function to look at large construction drawings using my Apple TV.  It says that my MacBook Pro has to be early 2011 or newer and I can't remember what it is.

    Mactracker - Get Info on any Mac

  • How can I use the "EvalScript()" function? I am trying to send text to a Director app from the web browser, but the console in the browser just responds "Uncaught ReferenceError: evalScript is not defined ".

    I am trying to control a Shockwave app form another machine, using "Pusher" service (websockets), and everything is ok so far; but when I try to send the shockwave app the text recieved from another machine, using the "EvalScript()" function (as documented), I only get the message "Uncaught ReferenceError: evalScript is not defined" in the browser's console. What am I doing wrong?
    'm using the following script in the webpage where the shockwave object is located:
      <script type="text/javascript">
        // Enable pusher logging - don't include this in production
        Pusher.log = function(message) {
          if (window.console && window.console.log) {
            window.console.log(message);
        var pusher = new Pusher('abc963cf3e6g678879e');
        var channel = pusher.subscribe('Galileo_channel');
        channel.bind('Galileo_event', function(data) {
          evalScript(data.message);
      alert(data.message);
      </script>
    The "alert" is working fine, but I can't get JavaScript to recognize the EvalScript (I even tried calling the shockwave object, ie: "extev01.evalScript()", since the object's ID is extev01, but it doesn't work, either).
    Help!

    Thanks Sean.
    I tried your suggestion first, using getNetText to poll the server and read a text file. The drawbak is that I had to poll the server constantly, since I could not know in advance when the text file was going to change (and it's not practical to stump the server and connection).
    I've kept trying the EvalScript, asigning the Shockwave object to a variable first, then calling the EvalScript() in the object, but it doesn't work, either. I think I will simply use JavaScript and forget about shockwave altogether, since everything is working fine up to that point (although it would be nice to be able to use Lingo for the rest of the app).

Maybe you are looking for

  • Canon LBP 6200d No longer printing on 10.9.5

    I have a Canon LBP 6200d compact laser printer and it was working fine with the UK CAPT driver. I must have installed an update form Apple or something and now it no longer works. I removed the driver, added it again, deleted this and that in the /li

  • "Adobe Photoshop Clip Image is Too Big To Be Exported" - Registry fix does nothing.

    Hello folks. I cannot paste any images out of Photoshop that are over 1200x900 pixels in size. I get the error message "Adobe Photoshop Clip Image is Too Big To Be Exported." I've tried the registry fix available on this forum, and nothing happens. I

  • Can we increase the Size of InfoObject

    Dear Experts, Can you please let me know whether we can increase the size of an InfoObject.Actually Max Size of InfoObject in 60,when I have declared an InfoObject of size 60,some value is getting truncated.Do we have any solution for such an issue.

  • Register updation - J1I5

    Dear Friends, 1. Whats are the classifications relevent for SD - whil updating the registers.... 2. Do we have any accounting impact after creation of ARE-1 specially in the case of Export under Rebate?     If so ....whats the A/C entries like? Cheer

  • Compare 2 fields and change color when they do not match

    I have a form where I am totaling up 2 columns.  When all is said and done both totals should match, but if they don't I want to change the color of one field to red and display a message.  Thanks, Diane