Using the mouse to move the browser causes it to tint light blue and fill the desktop. Jiggling the browser window and moving it slightly causes it to maintain its size. Using Win 7 64 Prof.

Also if I'm watching video and open a new browser, the new browser displays over the existing window - that's normal, but the new windows is light grey and useless- like it crashed.

Similar Messages

Why does the mouse cursor move to away from the currrent application without the mouse being moved

the mouse cursor moves away from the current application without the mouse having been moved - this started with the new version - re-installing Firefox makes the problem go away for a short period - re-installing is not a solution
== This happened ==
Every time Firefox opened
== a few days after installing 3.6.3

Hello Jim.
It's probably one of three things:
#your mouse is getting old (this behavior is common in old optical mouses);
#you have software that is making your mouse cursor behave unexpectedly (I know of an option in Windows that will automatically move your mouse to windows buttons...);
#or you may be having a problem with some extension or plugin that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?

I have an issue where coloured dots (small squares) appear on my screen and it gets to the point where the entire screen freezes although the mouse still moves but nothing works and I need to turn the computer off at the switch. Any ideas?

I have an issue where coloured dots (small squares) appear on my screen and it gets to the point where the entire screen freezes although the mouse still moves but nothing works and I need to turn the computer off at the switch. It doesn't happen all the time but is very annoying. Any ideas?

Reset the SMC and PRAM, if the issue continues then you likely have a failing GPU (hardware) that requires repair. To be sure take it in and have it professionally assessed.
Intel iMac SMC and PRAM resets

How do I adjust double click speed in Mountain Lion. The mouse system preferences does not seem to have a speed slider for double clicking. Only the tracking speed slider is visible.

Double clicking is no longer opening my folders.
How can I adjust the double click speed in Mountain Lion to reduce the double clicking speed. The mouse system preferences does not seem to have a speed slider for double clicking. Only the tracking speed slider is visible.

For 10.8.3, it's in System Preferences > Accessiblity > highlight Mouse & trackpad on the left. The Double click speed slider shows on the right. Moving it to the left gives you more time between clicks. Moving it right gives you less time.

When creating a fillable form and saving it as a pdf, the default color of the data fields is a light blue. How do I change the color to something else that will copy better, e.g. a light yellow?

When creating a fillable form and saving it as a pdf, the default color of the data fields is a light blue. How do I change the color to something else that will copy better, e.g. a light yellow?

It's probably the fields highlight color of the application, which you can change via Edit - Preferences - Forms.

When typing the curser does not move when typing so when typing the mouse will move the curser and/or delete becase it highlites everything - very frustrating

my mouse does not move or disappear when I am typing in my rogers yahoo account - the curser does. Since the mouse does not move, if I accidently hit the mouse pad or sometimes on its own it takes over and moves the typing to wherever the mouse is located. How do I correct this issue. I have Windows &

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

How do i get the mouse to move it's suck in a corner

the pointer for the mouse is stuck in upper corner how to i get it to ove

If its a USB based mouse, try unplugging the mouse and plugging it back in.
If it's a wireless RF mouse, make sure the RF dongle is properly plugged into the USB port. Make sure the mouse is powered on.
If it is a bluetooth mouse, make sure it is properly paired with your Mac (you may need another mouse temporarly to check on this).
And for any wireless mouse, be sure and try clicking the mouse a few times, many have mouse sleep routines to preserve the mouses battery life.
Tom

Now that I've upgraded to Lion, about 50% of the time when I click the mouse it acts as if I've right clicked. How do I get back to the way it was?!

I am working on two macbooks and an imac. I upgraded all the software last weekend and am now running all three computers on Lion. Over the last week, about 50% of the time when I click the mouse (whether it be the "pad" mouse on the macbooks or the standard mouse on my imac) it acts as thought I've right-clicked. How do I stop this insanity?! I want my old no-right-click mouses back!
Thank you for any guidance!
Jennifer

Try this,
Go to to the Trackpad System Preference and look at the Point and Click tab.
Uncheck the box that says "Tap to Click"
I found my track pad to be way too sensitive and I was finding myself in web pages I did not choose to go to. Unchecking that box will make it so you have to press the track pad to make it click something as opposed to just tapping it. It is more effort but also less sensitive to random taps.
Jay

Why am I unable to use the mouse to move maps around in yahoo maps?

When I open yahoo maps, I'm unable to hold down the left mouse button and move the map around to view other locations. However, double-clicking will allow me to zoom in and I can right click to pull up options to zoom out. This isn't an issue when I open yahoo maps in IE, but I don't want to use IE.

Hello gremles125,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

How do I get the wheel on the mouse to move the sliders in Lightroom4

I have a new Mac mini...I like it for the most part.
I have a kensington pro mouse with a wheel.
The program I am using is Adobe Lightroom4 and have always been able to use these peripherals in that evil windows wp-pro environment.

Best to invest in a Magic mouse for the macmini - I use this and the Wireless keyboard flawlessly with Lightroom... sorry if this means more to spend

I want to scan a blank form and fill in data in the resulting file. The PDF form

When UI download a form in PDF format, I am not allowed to fill in the blanks in the form eg. my name, ss#, address etc.

Please clearly specify the exact requirement... only then we can guide u better! Your statements does not indicate a crystel picture!
--Mukul

Transaction Launcher : calling URL and fill return values in the UI

Hi SDN,
We have a requirement, I am putting an example of it below:-
1. Call URL www.bank.com/branchlocator.htm?postcode=???????
2. pass postcode of confirmed BP to the branchlocator field postcode
3. the website will return nearest branch post code.
4. Return this postcode from the bank website, back into the webui address field.
Is it possible to achieve the above scenerio? if yes then any guidelines on how to achieve this?
Hope I am clear in the requirement. Any inputs/suggestion will be helpful.
Thanks,
Pankaj

Hi Shai,
the webservice is working well, trying to test it with webservice navigator.
He also returns the correct number of rows (because there appears slider beneath the table output and I also counted the rows), but there is no data displayed in visual composer.
I have got no further ideas, what the problem is...
THank you for your support.
Kind regards, PAtrick.

I can't find the tools panel in dreamweaver cs6. I am on a PC. I have tried to view all windows and toolbars. Where is it?

I need the eyedropper tool in Dreamweaver CS6. In all other Adobe programs it is in a Tools Panel on the left of the screen. Where is it?

DW doesn't have one.
Keep in mind, DW's interface is still very Macromedia-esque since it was acquired by Adobe.
What are you trying to do?
The answer to that will allow us to get you the directions you need to get it done.

My cursor movements don't match the mouse

I already asked this question on macosx.com but didn't get any helpful answers except that this problem is obviously caused by smart scroll. It didn't say anything about how to disable this (imo) unnecessary and annoying feature.
Here's my post from the other forum:
This problem is quite difficult to explain and it was hard to think of any terms that I could use for a search.
If I want the cursor to move a certain distance on the screen, I can either do that by moving the mouse fast or by doing it slowly. If I do it rather slowly, the way my mouse has to make on the desk is much longer than if I moved it fast.
Example: I want to move the cursor from the left edge of the screen to the right. If I do it in a very quick movement, I only have to move the mouse for, like, 5 centimeters. However, if I do it in a really slow sweep, the same distance on the screen takes up to more than 50 centimeters with the mouse.
By the way, the trackpad obviously does the same thing, as does the mouse wheel. I want the cursor to move the distances independently from how fast I move the mouse.
My hardware is a brand-new macbook and a USB Logitech optical pilot wheel mouse. (nothing wireless) I previously used the latter on my PC, where this problem never occurred. I also tried a different mouse on the mac and the problem was the same.
I already figured that installing a mouse driver might make the mouse behave as though it was on a PC. Unfortunately, LCC didn't change anything. Do you know a driver that actually works?

As I remind it, there are some applications for setting more on your mouse. i dont actually know the name, but try googling for them.

Is there a way to import tracks without using the mouse in Logic Pro?

From the user manual:
You can import existing audio recordings by simply dragging them from the Media area, shown at the right of the Arrange window.
My question is: is there a way to do this without dragging it with a mouse? I'd like to use a shortcut to open a browse folder and select a file. The reason for this is that I am nearly blind and I can't use my mouse for dragging because I can't see it.
Thanks in advance.

Can't see the mouse pointer.. even if you increase it's size using the Accessibilites features in OS X's System preferences...?
http://www.wikihow.com/Change-a-Mouse-Pointer-Size-in-Mac-Os-X

Using the mouse to move the browser causes it to tint light blue and fill the desktop. Jiggling the browser window and moving it slightly causes it to maintain its size. Using Win 7 64 Prof.

Similar Messages

Maybe you are looking for