Using the MXL USB.006 microphone with logic express 7.2.3

When I have the USB audio codec selected in logic express 7.2.3 (macbook pro, intel dual core) I cant get any sound from my speakers on the laptop, or the headphones I use with the laptop headphone jack. I can record vocals but can't hear playback. If I switch to the built-in audio driver for the macbook pro, I can hear the vocal I recorded on the MXL, but with the built-in driver selected, I can't record with the mic.
Is there a solution for this?

Hi md,
I think if you look up Aggregate device in help it's what you need. You create one in Audio MIDI set up which allows for input via the USB microphone, and output through built in audio. Then Select it in Mac Sound Preferences.
Good lck,
Ray

Similar Messages

  • How to use the Optical in on 002r with Logic Studio?

    Hi there
    i'm trying to figure out a problem that i really can't find a solution,i'm using Logic studio 8 whith Digi 002rack and 7.4 core audio version,my question is how to select in logic the optical IN of the 002r that in my case is connected to my triton rack synth?
    i can use the spdif in of the 002 but i can't find a way to use the optical in.
    thanks all

    I dont know if you will be able to connect other device like PS3 or Wii.
    As far as I know only the Xbox 360 could be connected to a Qosmio and could be used with the Windows MCE.
    I presume this is possible due to connection of Microsoft products; MCE and Xbox360
    To be honest; why you dont take a look into the user manual if this notebook is new to you?
    All details are mentioned in the user manual which is already preinstalled on the notebook.

  • Using isight microphone with logic express 7.0? Can this be done?

    Hey I'm not new to Logic, but I AM new to using this macbook pro. I can't seem to use coreaudio as my input, and choose the built-in mic as my input source. I have gone to system preferences > sound > input > built in mic and it is selected. Coreaudio is selected as my driver in Logic. Please help, or just tell me "you can't do that."
    Thank you so much!

    Try making a aggregate device that contains your isight in "Audio MIDI setup" and go from there. I did this briefly a few weeks ago just to see if it could be done and it worked.

  • I have East/West Symphony.  Will it work with Logic express and do I have to have that little red usb drive in the computer to authorize it?

    I have East/West Symphony. 
    Will it work with Logic express and do I have to have that little red usb drive in the computer to authorize it?
    Also, would it work with Garageband??

    Thanks-that's the same driver I'm using now.
    The M-audio techs were unable to tell me if Quattro would work with LE8, so I've been wasting my time and money trying to make it work.
    They also gave me conflicting opinions as to whether or not "tip" polarity was an issue when using an after-market adapter. One said definitely yes, one or two others said definitely no.
    Their phone tech line has a 20 to 40 minute wait when I call. The online support system is confusing, which even they admit. I don't think my next interface will be from M-audio.
    Thanks very much for the response, it helps me get beyond this phase.
    Is the Quattro of any use for anybody else (i.e., can I sell it or give it away)?

  • I have a MacBook Pro 15" laptop with Retina running OSX 10.8.5. It will not recognize that my android device (Samsung Galaxy Note3). I am using the standard USB that came out of the box to connect my device to my MAC. Deleted Kies 4 MAC. Help Pls!

    I have a MacBook Pro 15" laptop with Retina running OSX 10.8.5. It will not recognize that my android device (Samsung Galaxy Note3). I am using the standard USB that came out of the box to connect my device to my MAC. Deleted Kies 4 MAC. Help Pls!

    Dee002 wrote:
    MacBook's only have 2.0 USB ports.
    Wrong. 
    If you're not going to provide correct advice then don't repsond at all.
    http://www.apple.com/macbook-pro/specs-retina/

  • Bought and installing Logic X hope to use all my Pro Tools Stuff with Logic X to reduce the learning curve

    Bought and installing Logic X hope to use all my Pro Tools Stuff with Logic X to reduce the learning curve for my Wife who is not very computer savy All her music  is 96K and degitized with Pro Tools from analoge 16track tape.

    mende1 wrote:
    Welcome to Apple Support Communities
    Apple offered a refund for users who purchased Logic Pro 9 30 days or less before the Logic Pro X launch, but they don't do it anymore, so if you want to upgrade to Logic Pro X, you have to purchase it in the Mac App Store
    Part of this is incorrect...
    Some App Store employee's "accidentally" (but in good faith) issued refunds to a few users who had purchased Logic 9 within 30 days prior to the mid-July release of Logic-X. Word quickly came down from Apple HQ that this was against App Store policy and the practice was immediately stopped.
    To the original poster.. you never stood a chance, even if they were issuing refunds you didn't fall within the 30 day period.  There were many who purchased Logic 9 a few days before the LX release who did not get a refund.

  • How can i use the NI USB-6501 digital I/O with matlab?

    I want to use the  NI USB-6501 digital I/O with data acquisition toolbox in matlab?

    The USB-6501 is supported by Data Acquisition Toolbox in MATLAB releases R14SP3+ and later.
    The full list of National Instruments devices supported by Data Acquisition Toolbox is here:
    http://www.mathworks.com/products/daq/supportedio14005.html
    Begin to learn how to use digital input and output here:
    http://www.mathworks.com/access/helpdesk/help/toolbox/daq/f11-17944.html
    Inside MATLAB you can view demos in the documentation.
    To see two digital demos you can type these commands at the MATLAB command line:
    >> showdemo('demodio_intro')
    >> showdemo('demodio_line')
    Best regards,
    Sherryl
    Sherryl Radbil
    Data Acquisition Engineer
    The MathWorks

  • Can I use the ac/usb charger that came with my iPad 4 for my Classic iPod 80GB?

    Can I use the ac/usb charger that came with my iPad 4 for my Classic iPod 80GB?  I think I can, but I'm too chicken to try. Thank you ahead of time,
    Mark

    Thanks for the quick reply.

  • If I suspend wireless connectivity can I then use the camera connection kit along with the usb ethernet adapter to connect to the internet?

    If I suspend wireless connectivity on my Ipad2, can I then use the camera connection kit alond with the Apple USB Ethernet cable to connect to the internet?

    No, you can't.

  • HT4341 Can I use the 5w usb power adapter for iPad mini/ iPhone 4 in 220v with an adapter?

    I will be traveling to Peru and have an adapter for the different prongs there, can I use the 5w usb power adapter that came with my iPad mini, or do I need to buy a converter as well for t their 220v?

    The apple charger is rated 100V to 240V, 50/60 Hz. You can use it in any country.

  • Has anyone figured out how to make the Yamaha 01V96i mixer work with Logic 9.1.8

    Has anyone figured out how to make the Yamaha 01V96i mixer work with Logic 9.1.8 as a control surface ?

    In YAMAHA01v96i:
    Go to DIO/SETUP select Generic DAW. Go to MIDI settings page and set the desired port (personally I use Number 1), Select the same audio frequency you use in your DAW (I use 44.1KhZ)...at this point You should save a scene in you 01V96i to avoid to repeat all the procedure again.
    Open studio manager, go to patch and set the input port from 17 to 32 respectively to USB1-USB16 (this will give you the return from you DAW to the 01v96i
    Save again the scene overwriting the old one.
    in LOGIC
    Click on preferences, select Audio then select 01v96i, then click on control surface and select Mackie design Baby HUI and in the midi session set the same port that you've been setting on the Yamaha 01V96i (Port 1 if you follow this example).
    That's more or less it.
    It worked for me...so far

  • Can I use the iPhone as external microphone for my iMac?

    My imac doesn't have a mic in, only a line in. Is it possible to use the iPhone as external mircrophone with some extra software maybe? I want to create video tutorials and the internal microphone isn't good enough for this.

    Get something like this for your iMac:
    https://store.griffintechnology.com/imic
    Most Apple stores sell similar.

  • What's the best controller keyboard to run with Logic Express?

    I am a composer of mostly acoustic/classical music and was wondering about best user friendly controller keyboard for Logic Express. Does anyone have any recommendations? I am not a rocket scientist when it comes to working with connections, so I need something real easy in a 61 or 76 key synthesizer/controller. jack

    Cant really answer thatqestion in terms of the "best to use" with logic express, however, im in the opposite postion as you in the sense that im using logic with a motif 6 and want to sell it, and just get a controller. I produce hip hop, and have always prefered the sounds in the triton to the ones in the motif.....fo waht im using it for at least.

  • Can I use MainStage 2 with Logic Express 9.1.6

    Is it possible to use MainStage 2 with Logic Express 9.1.6.?  Are there any limitations to not having Logic Pro 9.  I'm very happy with LE9.1.6. as it meets all my needs (perhaps with the exception of not having Space Designer) but if I need to upgrade to get the most out of MainStage 2 then I will.
    Thanks.

    Actually I have found a way for at least the instrument plug ins to be accessed.
    I was able to set up an instance of Sculpture in MS2 and record it in LE using Soundflower.
    Route the audio from MainStage to Logic and record onto an audio track in Logic as follows:
    If not already installed, get SoundFlower. After installing it.
    A) Setup the sound you want in MS2 and audio output to Soundflower (remember to Apply Changes or it does not hold).
    B) In Logic Express set the audio input to Soundflower and create a new audio track for recording. Important: set Soundflower's audio output to however you listen to your audio or you won't hear anything.
    C) Press RECORD and start playing, LE captures Mainstage's sound.
    I have not tried to wire LE's output to MS2 to take advantage of Space Designer. but since this functions, I'm not sure why that couldn't work as well. It is still flipping though a few screens though...might just be easier to get Logic Pro from the App store....

  • Can I use the same USB cable for both the iPhone and the iPad?

    Brnad new user of the iPad - can I use the same USB cable for both the iPhone and the iPad?  The iPad does not charge when plugged into the computer or the wall (110V) adapter.  I've been able to sync in iTunes using the same cable on both.

    Actually, the iPad charger works just fine with iPhones and iPods.  The iPod/iPhone charger will charge an iPad very slowly but no harm will be done.

Maybe you are looking for

  • HELP - mouse click no longer working - Tiger bug?

    Hi Guys, I had a weird issue with Tiger (10.4.10) on my PowerBook G4 this evening. I was dragging a file to the trash, and "dropped" it onto the dock by mistake, just missing the trash. I was slightly to the left of the trashcan. I expected the icon

  • Module Question.

    Hi all, My scenario is File->XI->R3 Can I validate file information in a Sender Adapter Custom Module and if the validation fails then cancel the input so Integration Engine never gets the corresponding message? My question is how to cancel the proce

  • VGA / USB adapter for an iPad3

    I need an adpater that has both VGA / USB connections for an iPad3 to connect a projector.

  • Display version number in list, browse

    Hi, would someone know if there is a way to display the version number of a versionned document in the list, browse and detail displays. Thanks

  • Where am i gone wrong in this applescript

    tell application "Messages" set myFolder to "/Users/palmglow/Documents/googledrive/orders/IFTTT/test" set textMessage to ("-----") set targetService to id of 1st service whose service type = iMessage set myFolder to "/Users/palmglow/Documents/googled