Using the network

i have resently been using my network section of mac osx to transfer files from my old windows pc to my iBook. i have a few files that i need to transfer to my widows computer and i whant to vew them on my other apple computers but when i try to copy them into my network folder it wont let me copy them. i looked under the folder info and it says that the folder is read only but i cant cgange it to read/write and it wont let me ad a new folder to my network can someone tell me how to get folders / files on to my network?

Welcome to the discussion area, harperdg33!
You might want to take a look a device this this USB Broadband Adapter to provide an ethernet signal to your Time Capsule, which in turn could act as the wireless router for your network.
The key element with any adapter like this is to verify that it supports your particular service, so you may need to do some checking about this.

Similar Messages

  • Iphone 4s getting hot up when using the network. is it a sim problem

    iphone 4s getting hot up when using the network. is it a sim problem or battery problem?

    You posted in the iPad forum instead of the iPhone forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/index.jspa  I'll request that Apple relocate your post.
     Cheers, Tom

  • How to get our HP Officejet 7310 All-in-One to print using the network option

    The network printing initially stopped working on Win XP. I now use Win 7 Enterprise. 
    I have uninstalled the printer from my PC, restarted the machine, went through the add new printer device wizard and still no network printing capability. 
    I currently use the workaround of the USB connection for printing from one PC. 

    Have you tried running the Network Diagnostics tool to see if your printer is on the network.
    The tool is Here
    www.hp.com/go/tools
    JonW
    I work for HP

  • Static NATs using the network parameter

    If I want one-to-one static NATs which allow inbound traffic, will this work? I want to be able to ping, SSH, etc to 172.18.48.1 by going to 172.18.31.48.1 from the other side of the VPN.
    ip nat inside source static network 172.18.48.0 172.31.48.0 /24 route-map VPN_Somerset_NAT-rm reversible
    route-map VPN_Somerset_NAT-rm permit 10
     match ip address VPN_Somerset_NAT-ACL
    ip access-list extended VPN_Somerset_NAT-ACL
     permit ip 172.18.48.0 0.0.0.255 10.61.0.0 0.0.255.255

    To translate the real address 10.1.1.1 to the mapped address 192.168.1.1 when 10.1.1.1 sends traffic to the 209.165.200.224 network, the access-list and static commands are as follows:
    hostname(config)# access-list TEST extended ip host 10.1.1.1 209.165.200.224
    255.255.255.224
    hostname(config)# static (inside,outside) 192.168.1.1 access-list TEST
    In this case, the second address is the destination address. However, the same configuration is used for hosts to originate a connection to the mapped address. For example, when a host on the 209.165.200.224/27 network initiates a connection to 192.168.1.1, then the second address in the access list is the source address.
    This access list should include only permit ACEs. You can optionally specify the real and destination ports in the access list using the eq operator. Policy NAT does not consider the inactive or time-range keywords; all ACEs are considered to be active for policy NAT configuration. See the "Policy NAT" section for more information.
    If you specify a network for translation (for example, 10.1.1.0 255.255.255.0), then the ASA translates the .0 and .255 addresses. If you want to prevent access to these addresses, be sure to configure an access list to deny access.

  • Could Form server use the network device

    Can anyone tell me?
    When i used the form server, I had to type a full nework device path on the "serverArgs" parameter because my applications are on network device.<PARAM NAME="serverArgs" VALUE="module=\\servername\device\main.fmx>
    When i ran the html page on web ,it will appear the message (cannot read the form \\servername\device\main.fmx) . What can i do to fix the problem?

    Try changeing the DSN server. See:
    iOS 5 update issues  "Network...: Apple Support Communities

  • One computer can use the network while another can't even see it?

    Hello helpful people...
    I have a MacBook Pro (original release) and my roommate has an iBookG4. I have had a two-airport network system for years and never had a single issue with connectivity. About 2 months ago, my roommate's iBook started having trouble finding not only our network, but any network... now three shipments to Apple later, they have changed the airport card twice, the logic board, the RAM, etc. All other aspects of the computer seem to be working fine now, except that when I click on the airport icon at the top of the screen, it pulls up no networks. On my MacBook (sitting side by side with the iBook), I usually hit about 10 networks in my condo. Naturally, this would mean that there must still be something wrong with the airport card... but wait... it gets better.
    When I take the iBook to the Apple Store... it works PERFECTLY. And I feel stupid. What the ****? Do any of you have any clue as to what is going on?
    More specifically, if I type in the name of my network so that it can try to join. It keeps telling me that the password is invalid (and trust me... it's the right one). Also, if I EVER get it to connect to the network (it's hit or miss), it will self-assign an IP address and will never hit the internet. All of this is happening as I use my MacBook Pro on the same network and type this. I am so frustrated (as is my roommate).
    Any ideas would be much appreciated.

    Yes, you can do this. The registration doesn't have to be done on the same system the iPhone is going to be used with.

  • IPhone 4 - WIFI connection is made but cannot use the network

    I have connected my iPhone 4 to my wifi network but the wifi symbol doesn't show up and it stays in 3G mode. When I disable 3G mode, the wifi symbol shows up but it will not allow me to access the internet. What could be wrong?
    At first, I thought it had to do with my router settings but my neighbor has a iPhone 3GS and was able to access my wifi and get online with no problem. I used the same WiFi settings on my phone that my neighbor did and still have problems. Am I doing something wrong?

    Skydiver has it surrounded.  You have not successfully negotiated with your router.  Take a look at the settings when you think it is connected, specifically the ip address.  If it does not begin 192.168 then you have not been granted access.  Do you have security on?  Turn it off, and try to establish a connection, then if that works, turn it back on.
    Or
    Chose to forget the network, then re search and reconfigure.  I am betting that is will ask you for a password, or a wireless key to make the connection. Mthe fact that both devices have the same symptom suggests the issue ismin how you are doing the router connection.

  • How can i use the network logon (VPN) as my default logon environment ?

    Hi!
    I use my laptop only for connect to my work, but every time i need to switch the last local user and click in the Network Logon icon in the bottom right corner, how can i make the network logon my default logon environment ?

    Hi,
    Logon process cannot be easily replaced, but if your concern is just to ignore it, we can use auto logon to bypass the manual logon process:
    Autologon for Windows
    http://technet.microsoft.com/en-in/sysinternals/bb963905.aspx
    Alex Zhao
    TechNet Community Support

  • I updated from Snow Leorard to Moutain Lion and now my internet will not recognise  my password. All other comps use the network but my Mac upgraded Mac Mini keeps coming up with either 'timeout' or 'user or password not recognised' ...help!

    Hello all
    I upgraded from Snow Leopard to the latest Mountain Lion OS and now my Wifi will not work. When I try and insert the password to my Wifi network states either 'connection timed out' or 'password and/or user name not recognised' please help...!

    Take each of the following steps that you haven't already tried, until the problem is resolved.
    Step 1
    Restart the router. Many problems are solved that way.
    Step 2
    Change the name of the wireless network, if applicable, to eliminate any characters other than letters and digits. You do that on your router via its web page, if it's not an Apple device, or via AirPort Utility, if it is an Apple device.
    Step 3
    From the menu bar, select
     ▹ System Preferences... ▹ Network
    Click the Assist me button and select Assistant. Follow the prompts.
    Step 4
    Back up all data.
    Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
    Enter the name of your wireless network in the search box. You should have one or more "AirPort network password" items with that name. Make a note of the name and password, then delete all the items. Quit Keychain Access. Turn Wi-Fi off and then back on. Reconnect to the network.
    Step 5
    You may need to change other settings on the router. See the guidelines linked below:
    Recommended settings for Wi-Fi routers and access points
    Potential sources of interference
    Step 6
    Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.

  • Desactivating the "Is it Ok to use the Network" message

    Hi Sun Community:
    I'm using the last version of the Sun Java Wirelless toolkit (2.5). I was wondering if there is a way to desactivate the message that appears everything the emulator need to connect with something in the internet.
    thanks

    Come on... do you really thing you are the first one with this problem. Use the search, this has come up many times already!

  • Using the network load balancing from the nodes itself

    I have installed a 2 node Sun Cluster 3.2, configured a shared ip resource and attached to it a scalable network aware resource working on the two nodes. I have crashed the process on one of the node in such a way that the cluster could not restart it again
    In this status I tried to open a connection from another server and the load balancer always sent the traffic to the node that was up which is as expected...
    If I try to open a connection from the node on which the process is failed then I get a connection refused meaning that the load balancer is not working in this circumstance.
    Is this a bug/ a mis-configuration/ or just an inherent cluster problem.
    Is there a solution to this issue?
    Regards
    Daniel

    To answer your first question, no, there isn't anything you can do.
    Here is what my colleague suggested while I was away:
    Zone-clusters scalable services still require shared-IP zones, which means requests from one app to another would still bounce back due to loopback. Probably wouldn't help here.
    They could isolate the services that must talk to other services into their own failover group on exclusive-IP zones. Other services can be setup as originally planned. But maybe there are too many such "dependent services" for this to be useful. Also, each failover service must have its own IP address.
    Finally, can these  web services be configured so that it tries multiple addresses. In that case, if the shared address foo for service X bounces back (due to X having crashed on the local node), the app itself would retry with address bar for service X? This allows for uniform configuration across all services, namely:
        - try shared address
        - try node 1's own address (either public or clusternode1-priv)
        - try node 2's own address
    You can fine tune it so that configurations on node 1 only use node 2's address as backup, and vice versa. I don't know if that is any help.
    As for your second question, the answer is that Solaris Container Clusters allow for consolidation and isolation of clusters onto a single set of nodes. Normal containers don't really allow you to consolidate complete clusters in quite the same way. See http://www.sun.com/offers/details/820-7351.html for more.
    Tim
    ---

  • Using the Network Three Wifi Dongle with Time-capsule

    Hi folks, i have just joined the forum today but have been an apple user for 2 years now. I do not use a router to get on the inter as I have recently purchased the 3 WiFi Dongle (mifi) and just wirelessly connect my ipad, iphone and macbook pro to it. My question is can I connect my macbook pro to my dongle and also to time-capsule wirelessly at the same time or is it only 1 device at a time?
    Also is there a way I can connect my USB wifi Dongle to my time-capsule and just have everything connecting to my Time-capsule?
    Any information on this would be greatly appreciated.
    Thanks
    Dave

    Welcome to the discussion area, harperdg33!
    You might want to take a look a device this this USB Broadband Adapter to provide an ethernet signal to your Time Capsule, which in turn could act as the wireless router for your network.
    The key element with any adapter like this is to verify that it supports your particular service, so you may need to do some checking about this.

  • Hi, I have a MacPro and can't get it to connect to my emails or Chrome / Safari to work. The Internet works fine on my iPads; I have used the network diagnosis tool to check that the Ethernet connection is fine, and it is.  Help, please?

    I don't have another computer that I can connect to the Ethernet; and its not really practical to move the Mac Pro nearer to the Airport Express to get wifi signal. I've tried turning everything completely off (including taking the plug out of the socket), but it still doesn't work.  Any ideas, please? 

    Desperate times call for desperate measures:
    System Preferences > Network > Ethernet > (Assist Me) > Assistant ...
    ... and set it up again, being sure to specify a new "Location". Do not keep the "Automatic" one, create a new one or accept the default (current date&time).
    A "Location" is a basket of settings from all over the place that could influence how your network connection behaves. Thye were invented to collect together such stuff so that you could switch fro "Home" to "Work" to "StarBux" just by specifying the Location, and all the settings needed would be pulled together and applied at once.
    Sometimes a stray setting gets included by accident, and a new setup eliminates that stray setting and it perks up and works afterward.

  • I installed OS Lion on my late 2009 Macbook and now I am having issues with WiFi.  When my computer goes to sleep my mac won't recognize my WiFi and I need to use the network assistant EVERYTIME to get on the internet.

    Very frustrated as my Macbook has been freezing a lot especially when streaming video online or sometimes just by being on a website with a lot of flash.  I've updated all my software and I have 4 gigs of ram.  I do have most of my 250 gig hard drive used up....coud this be an issue?

    Very frustrated as my Macbook has been freezing a lot especially when streaming video online or sometimes just by being on a website with a lot of flash.  I've updated all my software and I have 4 gigs of ram.  I do have most of my 250 gig hard drive used up....coud this be an issue?

  • OS 10.8.2 on an imac.  Whenever I wake from sleep, the wifi has disconnected and I have to use the Netowrk Diagnostics in the Network settings to log back in to my router.  Every time.  is there any kind of fix for this?

    I am running OS 10.8.2 and everytime I wake my computer from sleep, the wifi is disconnected and I have to use the Network Diagnostics assistant to reconnect to my router.  Is there any way to get it to not disconnect everytime?  I have resorted to just leaving Network Diagnostics open and just rejoining the network every single time I wake the computer.  Any help here?

    I am running OS 10.8.2 and everytime I wake my computer from sleep, the wifi is disconnected and I have to use the Network Diagnostics assistant to reconnect to my router.  Is there any way to get it to not disconnect everytime?  I have resorted to just leaving Network Diagnostics open and just rejoining the network every single time I wake the computer.  Any help here?

Maybe you are looking for