Using the notify me in new find friends

I am using the notify me aoption to let me know when my child leave a location. I do get a notification, but the notification says I have left the location not my child. Is this a bug, or is there something I am missing?
I am sorry if this is in the wrong community, but it is the closest I could find to my question.
Thanks,
Chsir Boston

UPDATE: To recap - boyfriend and I are on iphone 4s, both are updated to iOS6, I was having problems on my phone with the Notify Me button not working (being greyed out) on his Find Friends screen. So we went into our account settings in Find Friends (Me>Account) and when we scrolled down there is something that says: Show Geofence Alerts From: Mine was on Only my Friends, his was on Everyone. I had NEVER changed this setting (I used to have no problem getting alerts for him) so I really didn't think this would work. I switched mine to Everyone, checked his screen, and the Notify Me button was available. To experiment I switched it BACK to Only My Friends and it stayed lit up. In conclusion - that really shouldn't have affected anything especially considering that it made no difference when I switched it back, but somehow it magically fixed it. So as long as everything else is correct (both phones updated to iOS6, etc.) then you might want to try this. Hope it helps.

Similar Messages

HT204407 Why doesn't the "notify me" portion of Find Friends app work?

The "notify me" part of the find friends app still doesn't work.

Hello,
I'm sorry if it wasn't clear... but I don't have ram issues with the Kingston type...
I used the new Kinsgtons in my macbook and wanted to take the originals from the macbook (Samsung) and them put in my iMac next to the other modules that were already in the iMac.
I know it's a bit confusing... ;-)
So... I have 2 x 4gb in my iMac from a brand I can't remember the name off... And I also wanted to put in 2 x 2 GB Samsung modules. So that would count up to 12 GB ram. Why? Because I took the Samsung modules out of my macbook and I thought I could reuse them in my iMac since they have the same specifications (1333MHz DDR3). But My iMac won't start up as soon as I insert those 2 Samsung modules.

How to use the "identify" feature in new 6.3.1 airport utility?

how to use the "identify" feature in new 6.3.1 airport utility?
so you can find the basestations in larger networks?

There is a workaround, which is to use Airport Utility 5.6.
I can confirm that 5.6 will run on 10.8.4 Mountain Lion, it will recognize the new 2013 Airport Extreme Base Station (A1521) running firmware 7.7.1, and it will give you access to view the device's Log & Statistics, DHCP Clients, and Profiles.
Four caveats:
1) The easiest way to install it is to download the app itself, not an installer or through the App Store. There is a page here where you can download the app: http://coreyjmahler.com/2013/03/08/airport-utility-5-6-on-os-x-v10-8-mountain-li on/ This way, you still have both versions, Airport Utility 6.x.x and 5.6.
2) When you launch 5.6, you'll get a message saying a newer version is available and asking if you want to update. Click Cancel to proceed into the utility.
3) When you click the Manual Setup button in 5.6, you'll get a warning dialog that "This version of AirPort Utility doesn't support this AirPort wireless device and might improperly configure the device if you continue to use it. Check www.apple.com/support/airport for the latest version of AirPort Utility." You can click Continue to get into the utility without issue.
4) You should probably only use 5.6 to view the additional status details. I have not tried to modify and save any AEBS settings using 5.6. There are other discussions here in the forums indicating that attempting to save settings via 5.6 that are no longer available in 6.3.1 will not actually save the settings to the AEBS even if both utilities indicate that the settings are changed. See https://discussions.apple.com/message/22677993#22677993
So, even though you can't use it to modify settings no longer available in Airport Utility 6.3.1, using Airport Utility 5.6 to view DHCP clients, Logs and Statistics is very useful for troubleshooting network issues.
PS - There are two ways to get to the DHCP Clients list, neither of which is obvious The first is to go to the Airport pane -> Summary tab and click on the "Wireless Clients:" label in the Summary display. All of the labels from "Wireless Mode:" down on the Summary display operate as links to view/edit the corresponding info/settings, which is also not obvious at first glance. Also not obvious, clicking on "Wireless Clients:" actually brings up a new pane with three tabs: Logs, Wireless Clients, and DHCP Clients. You can also get to the same pane by going to the Advanced pane and clicking on the Logs and Statistics button.
I hope this is helpful information. Took me a while to find out how to do this.

Notify Me function in Find Friends app

Has anyone been able to get the "Notify Me" feature to work in the Find Friends app? I believe I've made all the appropriate adjustments in Settings as well as the app itself. However, when the friend arrives at the destination I selected, the app does nothing other than unselect the "Notify Me" button. No alerts or notifications appear anywhere.

Joe:
Thanks for the reply but please understand that the article doesn't address my question at all (nor does it really provide any details on settings, etc.) For the record, here is what I've set up:
I am properly logged in with my iCloud and I am able to the current location of the friend that I am following. This gets updated every 30 seconds or so. So that part works.
In the iPhone settings area under "Find Friends" have selected "Allow Notifications", 5 notifications in "Notification Center" and "Sounds", "Badge App Icon", and "Show on Lock Screen" are all enabled.
In "Find Friends", once I see the map with the friend's location, I click on the "Notify Me" button which then asks if I want to notified when the friend leaves or arrives at a given location. That in turn takes me back to the map screen where I see the "Notify Me" button. Doesn't matter what option I choose (i.e., where leaves or arrive)--nothing happens.
Therein lies the problem.
Am I supposed to have the Find Friends open all the time or is the notification also supposed to work in the background. I have tried both approaches and neither yields any kind of notification.
Hope this helps.

Whenever I close down Photoshop CS5 I get the message: "Could not save Preferences because the file is locked or you do not have the necessary access privileges. Use the get info command in Finder to unlock the file or change permission on the file or enc

Whenever I close down Photoshop CS5 I get the message: "Could not save Preferences because the file is locked or you do not have the necessary access privileges. Use the get info command in Finder to unlock the file or change permission on the file or enclosing folders." What on earth does it mean? How can I stop this message from appearing?

See here:
I cannot save recent images.

I have files that say they are missing or offline. I have checked all my folders off of lightroom and they can not be found. I have used the ? mark settings to find and still not found. I can see the images on lightroom so they have to be in my system som

I have files that say they are missing or offline. I have checked all my folders off of lightroom and they can not be found. I have used the ? mark settings to find and still not found. I can see the images on lightroom so they have to be in my system some how. How can I retrieve these images? Is there a re boot for lightroom? Need help ASAP!

You have probably moved the files outside of Lightroom. The images you see in LR are previews that were made before you moved the files.
Do a search for the files/folders using your computers operating system. (Explorer/Finder)
Once you have found them, you can point LR to the right location.

I change ISP and use ms explorer to set on to new ISP. Internet options has the new ISP address but Firefox does not pick it up and is still using the old ISP. Can find no way to set firefox to new ISP. How do i do it?

I changed ISP and used ms explorer to set up on to new ISP. Internet options has the new ISP address but Firefox does not pick it up and is still using the old ISP address. Can find no way to set firefox to new ISP address. How do I do it? edit

-> Tap ALT key or press F10 to show the Menu Bar
-> go to Tools Menu -> Options -> Advanced -> Network -> Connection section -> click '''Settings...''' button -> change these settings in accordance with Internet Options settings that work on MS Internet Explorer -> click OK
Check and tell if its working.

I want to use the SSD from my new 12 core in my old 4 core but the 4 core doesn't see the SSD. Flashing file with "?". What do I need to do?

I spend a lot of time in a location far from home. I bought a new MacPro 12 core to use at home and took the old 4 core to the alternate location. I figured I could just take my hard drives back and forth instead of schlepping a whole MacPro. The 12 core has a SSD drive to boot from and a 2 TB storage drive for photo files. It came with Mountain Lion (10.8.2). At the new location the 4 core does not find the SSD and won't boot. Grey screen. If I take the SSD out I can boot with the 2TB drive but it boots in OSX 10.6.8. I can get by with that workaround, but I'd like to use the SSD if I can because PhotoShop runs a lot faster from it.
The SSD does not show up in Finder or Disk Utility when the computer is booted up with the 2TB drive.
What do I need to do?

...or that the installed image on the SSD came from a model-specific version of Mac OS X that shipped with that Mac, and does not have the drivers to support a different model Macintosh, not even an older Mac Pro.
You can install a new Mac OS X image, such as "Full Retail" 10.6.3 off a DVD in under an hour, and have it up to date and ready for production in only a little more time.
Or you could clone 10.6.8 onto the SSD (from the other Hard Drive that does boot) in about a quarter hour.

How can I use the app in itunes to find my iphone 4S

I've gone to itunes to use the find myiphone app but it doesn't do anything. I went to Apps and that is where I see the app. I need to find my phone.
Sandy

Was the "Find My iPhone" feature enabled on the device prior to it beling lost? If it was not, the only way to find the device is to physically look for it.
If the feature was enabled, go to www.iCloud.com and search for the device. As long as the device is powered on and connected to a network (wi-fi or cellular) it can be tracked.

Is there any way to change the default folder for new finder windows...

...Or even set a different folder as the "home folder"?
I am recovering from an incredibly messy archive and install which refused to allow me to save my old user accounts, instead moving them all into "Previous Systems". In my haste to get the machine working again I just dragged and dropped my old home folder into the /users/ directory and changed the "short name" of the new account to match it. IT worked, but now I have an incredibly irritating problem. That is now indeed my home folder, as appears in the sidebar of all finder windows, albeit under my new short name instead of my old one. All my documents in iWeb, Garageband, etc are working now and default to the new folder.
However, Finder has not recognized this, and every time I open a new Finder window or anything like that it defaults to the home folder created by the reinstall, which is now locked to this account (so all the folders have a red no entry sign on them). I would very much like to tell Finder to ignore this now defunct folder and default to my actual home folder instead - is there a way to do this without actually moving or changing any folders? Like a preference setting somewhere? I know there's the "Advanced Options" pane in Leopard but I've been completely unable to find anything like it in Tiger

Finder > Preferences > new Finder Window opens
[Recover from renaming your Home folder|http://www.thexlab.com/faqs/renamehomerecovery.html]
[My home folder and desktop are different than before|http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1952.html]
[Return to Default Desktop, Apparent Loss of Home Directory|http://support.apple.com/kb/TS1876]
[ChangeShortName tool|http://www.danfrakes.com/ChangeShortName.html]
Message was edited by: Limnos

Urgently, how to use the EEWB to ad new field in the business partner page

Hello All
I am working on CRM 5.0 EEWB
I am trying to add new field in the business partner page I followed the steps for creating the project and the extension but I faced some problems
1-I chose the package BBP_BUPA_MAIN BBP Business Partner General
I created two transport requests for the workbench and the customizing
2- I created an extension with EEW Bus. Object: BUPA and extension type: ADD_NEW_FIELDS
3- I got an error that <b>"Object DOMA ZBU_009XN27S is in the name range reserved for customers. The object cannot be assigned to package BBP_BUPA_MAIN, since it belongs to a different name range or namespace"</b>
I tried to change the package but the same problem occurs and if I choose a custom made business package I get a similar error but, before the wizard starts
I want to know the exact steps to create new field using the EEWB
Regards
Jacopo Francois

Hi,
Error info: "Object DOMA ZBU_009XN27S is in the name range reserved for customers. The object cannot be assigned to package BBP_BUPA_MAIN, since it belongs to a different name range or namespace"
Clearly states that you need to assign some different name to the package which is not reserved by SAP as Z### is already reserved by SAP and thus you will not be able to create the enhancement in the same.
Best Regards,
Pratik Patel
<b>Reward with Points</b>!

TS3376 how do i use the app on itunes to find my iphone

how do i get find my iphone app to work on i tunes

firefighter201... The device that is lost has to have had Find My iPhone service turned on in Settings > iCloud > Find My iPhone (Toggle ON) prior to being lost; that being said, iCloud had to have been also activated and signed into on the missing device.
If the above is true, then using another computer you go to iCloud.com > Sign in with the Apple ID/password used for iCloud on the missing device > Chose Find My iPhone web app button > All devices linked to that Apple ID will then be viewable on the map > Chose a specific device from the "Devices" Button (upper-left corner) > Then you can choose options > 1. Play a Sound ; 2. Lost Mode (lock with a passcode of your choice) ; 3. Erase iPhone (this wipes all data, last resort!!!)
Find My iPhone App: Download from the App Store onto any iOS device and repeat the instructions as seen above when you sign in with the same Apple ID.
**Important** For the device to be locatable or for the chosen option to take effect the device has to have a cellular or wifi connection, if it is not locatable using the "Lost Mode" option will alert you via e-mail when it does become locatable.
I hope this helps!

I do you use the contoller to "submit" new information?

I want to access my Icloud and need to change the Apple ID. I entered the new Apple ID and wanted to "submit" thee information. How do I use the "submit" button on the controller?

Have you tried the centre button, as suggested above?
You may need to navigate to the submit button first, by using the arrow on the remote

New computer, can I use the disc on my new computer to install it there?

Can I install it on my new computer after it's already been installed in my old one?

If you do not plan on using the old computer, you are better off deactivating your suite, then uninstall. But as far as the license goes you are allowed to have it installed on two computers but only one copy can run at a time. This is meant to allow you to have it on your desktop and laptop as that is the most common senerio.
If you already have it installed on two systems and can not access one of them to deactivate it, you can call adobe and see if they can do it for you, not sure if they will but it is worth a try.

Using the OES migrations for new hardware

I need to change my hardware, is it possible to use the migration tool to change from one hardware with OES linux to a new hardware with also OES linux just as we did from Netware to Netware ?

Thanks, that was the information I was looking for, I had migrated this hardware from Netware to Linux, now I needed to change the hardware and migrate from OES linux to OES linux
Originally Posted by Marcel_Cox
Yes, but you need to use the migration tool provided with OES2/Linux, not the "old" NetWare migration tool.
The conditions are:
- the destination server must be running OES2SP1 or later (OES2SP2 fully patched is very highly recommended because otherwise you may have trouble because of bugs in the migration tool)
- the destination server must be installed with the premigration pattern as well as with all services you want to migrate
- the "temporay" installation is done into the main tree, not into a temp tree like for NetWare migrations
- you run the migration GUI tool from the destination server. There is no workstation involved
Apart from these main recommendations, follow the documentation of the migration tool found here:
Novell Doc: OES 2 SP2: Migration Tool Administration Guide - OES 2 SP2: Migration Tool Administration Guide

Using the notify me in new find friends

Similar Messages

Maybe you are looking for