Using the "Plan a meeting" function in Outlook

Hi all
When I set up a meeting on my iPhone and transfer the details to my work PC, it shows up in full in my calendar, but when I go to the "plan a meeting" function, it has disappeared from there! This function is really important to me as others use it and can assume I'm free when I'm not!
Any advice much appreciated
Thanks
Ian

There's no way of doing this that I am aware of. With firmware version 2.0 there will be tighter integration with Exchange, so this might become available.

Similar Messages

Go Daddy UCC Certificate: "ExRCA can only validate the certificate chain using the Root Certificate Update functionality from Windows Update"

Hello,
I have this issue regarding certificate chains while performing Outlook Anywhere connectivity test
by Microsoft Remote Connectivity Analyzer:
"ExRCA can only validate the certificate chain using the Root Certificate Update functionality from Windows Update. Your certificate may not be trusted on Windows if the "Update Root Certificates" feature isn't enabled."
Note: even if I got the error, Outlook Anywhere and
ActiveSync services work fine.
Environment:
- Exchange 2007 with SP3
- Go Daddy Multiple Domains UCC certificate (up to 5 Subject Alternative Names)
I already read and followed instructions on this TechNet post
Can I safely ignore this warning about the SSL cert? Using GoDaddy UCC cert but it is a little bit different by this case.
So after an investigation I understand the issue above is related to SSL certificate
Certification Path (see screenshots below).
NO ERRORS on ExRCA checking
Go Daddy Secure Certification Authority is under Intermediate Certification Authorities
repository
Go Daddy Class 2 Certification Authority is under Intermediate Certification Authorities
repository
Starfield Technologies (http://www.valicert.com)
is under Trusted Root Certification Authorities repository
ERROR on ExRCA checking
Go Daddy Secure Certification Authority is under Intermediate Certification Authorities
repository
Go Daddy Class 2 Certification Authority is under Trusted Root Certification Authorities
repository
Can you add some useful information ?
I'm opening a support ticket at Go Daddy; I hope they could me some positive feedbacks.
Regards,
Luca Fabbri
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees, and confers no rights.

Strange I have a feeling the exrca tool can't validate the godaddy class2 root authority due some older compability and wants to use the older original root authority valicert owned godaddy. Or when the exrca tool is validating the root CA it only has the
goaddy class2 root ca that was issued by valicert and not the standalone cert when doing the comparision. I sent the question to MS and will let you know when I hear back.
You can get rid of it
https://certs.godaddy.com/anonymous/repository.seam
Download the cert
◦gd_cross_intermediate.crt
Then import it into the trusted root cert authority on your CAS boxes. Then you need to delete the other godaddy class2 root authority. Make sure you see the one you imported both will be named goaddy class2 root authority but one will be issued by valicert.
Re-run the test and it will go away, I also saw the error with my domain as well using godaddy and got rid of it by using the new cert authority.
James Chong MCITP | EA | EMA; MCSE | M+, S+ Security+, Project+, ITIL msexchangetips.blogspot.com

Is there a way to use the preview in browser function without an Internet connection?

This morning our cable modem was down and I was making some changes to a page in a Muse site I'm designing. I wanted to preview the changes in a browser, but when I clicked on the Preview button (or clicked on preview in browser), I received a notification that it was checking for an Internet connection and the preview page never completed. Is there a way to use the preview in browser function in Muse without an Internet connection?

Thanks for getting back to me! When our cable modem went down, we were still connected to Airport Base Station, and perhaps it appeared to Muse that we did have an Internet connection. In any case, we have now received a new cable modem and our network is working again. As you suggested, I disconnected from the network and tried preview in Muse again, and now it seems to be working just fine. Perhaps it was just the circumstances of our network problem this morning. Good to know I can use the Muse Preview function off-line!

With using any version of iTunes, whenever I import songs into my library using the "add to library" function, iTunes adds those songs in songs' alphabetical order. This is pretty annoying since it does not preserve the logical track number or album.

With using any version of iTunes, whenever I import songs into my library using the "add to library" function, iTunes adds those songs in songs' alphabetical order. This is pretty annoying since it does not preserve the logical track number or even the album sort order (for example when adding 2 albums stored in a unique folder). Anyone has any ideas ? Been stumped for a while....!!!

hi i had the same problem today when i updated my itunes to latest version. however, i have just found my songs in the 'itunes media' folder. this was accessed through 'my music' then keep clicking through until you find itunes media and all my library songs were in there and i then just added these files to my library and all were restored however, i have lost all my playlists but at least my 700 songs are back. very dissapointed with apple that they have let this happen with their latest update, the previous version was miles better than this one . hope you find them. stevo

In the numbers app, using the "date and time" function, is it possible to remove the time? I need to put together a list of dates, but I don't need or want times.

In the numbers app, using the "date and time" function, is it possible to remove the time? I need to put together a list of dates, but I don't need or want times.

When formatting your column to date/time, pick Date & time, and then pick the letter i in the circle to the right. Then scroll down and pick "No time"
Jason

Using the result of a function, inside a subselect

Hi!
I´m wondering if it´s possible to use the result of a function inside a subselect. Let me give you an example of what I´m trying to do here:
select * from t_node where node_pk in (get_node_parents_pk(22345));
The function get_node_parents_pk stands in for the following SELECT-statment:
select node_pk from t_node_child where parent_node_pk = 12345
The statement above would return something like this: 12435,23423,23453,23452
These values represent the node_pk value for the parent nodes.
I want the get_node_parents_pk function to return a result set similar to this so that I might call it inside the IN ( ) statement.
Any clue? =)

I created a collection type in the database:
CREATE OR REPLACE TYPE nodes_pk_arr IS TABLE OF INTEGER;
The function get_node_parents_pk () is made to return the collection type above. However, this does not work. I get the following error message:
SELECT *
FROM t_node
WHERE node_pk IN
(SELECT * FROM TABLE (get_node_parents_pk (22345)));
ORA-22905: cannot access rows from a non-nested table item
However, if I insert a nodes_pk_arr collection directly into the SQL-statement, like I do below, it works:
SELECT *
FROM t_node
WHERE node_pk IN
(SELECT * FROM TABLE (nodes_pk_arr(24564,23545,34523));
So, when returning the collection from the function I´m told that the collection is not a nested table, when in fact it is. What gives?
Also, is there no way to return a result set directly from the get_node_parents_pk() function, making it possible to write the statement like that shown below?
SELECT *
FROM t_node
WHERE node_pk IN (get_node_parents_pk (22345));
Your reply is much appreciated!
Kind regards
Robert

I found a track yesterday using the new siri-shazam function. Now, how do I see tracks I've found ?

I've used the new siri-shazam function to look for a track yesterday. Now how do I find it ?

You need the Kernel source and the ALSA source packages installed for ubuntu for the build to work right.
It looks like the installer is having an issue trying to extract the package. You need to make sure you are root and when you switch to root, type "su - " without the quotes so that you get the environment of the root user as well which will have the correct paths for the /sbin and etc.
After you extract everything and the setup completes, dont' worry because it won't work.
Please god send us another Audio card from another company that cares.

My Macbook pro OS 10.10.2 suddenly will not communicate with my Cannon MX890 printer. I reset all printers and now I cannot seem to add a printer by using the Add a printer function. Ideas?

My Macbook pro OS 10.10.2 suddenly will not communicate with my Cannon MX890 printer. I reset all printers and now I cannot seem to add a printer by using the Add a printer function. Ideas?

The appearance of the printer in the Default view of the Add printer window relies on a protocol called Bonjour. There have been quite a few users who upgraded to Yosemite only to find that their wifi printer is no longer visible. Until Apple resolves this issue you can add your printer using the LPD protocol. To do so you will need to determine the IP address being used by the MX890. This can be done via the touch panel under Device Settings > Network Settings.
Once you learn the IP address then on the Mac you can click to add the printer and select the IP icon. Here you can enter the IP address, set the Protocol to Line Printer Deamon and leave the Queue field blank. Then change the name to Canon MX890 and in the Use menu, browse for the Canon MX890 series driver. Then click Add to complete the printer creation.

Error 91 - Trying to Use the Variant to Data Function

I am running into a problem when trying to use variants in my application. I have a state machine set-up in that one state creates a task list (cluster of arrays) and then converts it to variant. The variant is fed into a shift register that allows me to access the task list from a different state.
The problem comes when I try to use the Variant to Data function. I right click on the task cluster to create a constant, and then wire that to the TYPE terminal of the Variant to Data Function. I wire the task cluster variant to the VARIANT terminal. When I run the VI, i get error 91: Possible reason(s): LabVIEW: The data type of the variant is not compatible with the data type wired to the type input.".
How can I get this error when the type I wired to the TYPE terminal of the Variant to Data terminal is a constant created from the exact type created a variant from???
Section of the state machine where I wire the cluster to variant:
Section of the state machine where I use the Variant to Data to get the cluster out:
The constant wired to the Variant to Data TYPE terminal was created from the cluster that is wired to the Data to Variant. I do not understand how there can be a type mismatch???
Solved!
Go to Solution.

Charles_CLA wrote:
crossrulz wrote:
Are there any other state that run between these two? I am noticing you have some "Use default if unwired" tunnels comming out of your case structure. First of all, disable that on the tunnels. Secondly, for those cases where you are not affecting that data, wire the data straight from the input tunnel to the output tunnel. I recommend using the linked tunnels to make it even easier on yourself.
With the default tunnels being output, your variant coming in could really be empty, therefore the conversion fails.
Are you stalking me today? Every single post I've clicked comment on, you beat me by a hair!
No, just 12 hour days (due to the holiday) get really long...and you are just slow.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Firefox does not open with the tabs I had open when I use the quit and save function. Firefox opens with my home page only. how to fix?

When I use the "Save and Quit" function it has no effect. The next time I open Firefox it goes to my home page only.
== This happened ==
Every time Firefox opened
== 3 days ago

This is not a solution, nor a work-around. The only thing this points out is where the problem lies. Settings are meant to be used in all sessions, barring exceptions and the fact that Firefox asks if you'd rather SAVE and then quit, makes it an exception. The user has elected to skip the clear browsing history step.
However, if the settings are permanently changed as you suggest, then the history will always be remembered for eternity when Firefox is closed. You then have to manually clear your history first at every session before closing.
Older versions of Firefox never behaved in such manner and recognized that the Save and Quit superseded the setting to Clear History.

Both my boss and I have the iPhone 5C for Verizon. When I text, I have the little microphone next to the space bar, allowing me to use the speech to text function. He does not. How do you turn this on or remedy this problem?

Both my boss and I have the iPhone 5C for Verizon. When I text, I have the little microphone next to the space bar, allowing me to use the speech to text function. He does not. How do you turn this on or remedy this problem?

Does your boss have Siri turned ON? See Settings > General > Siri.

Using the "Plan Resources" functionality

Hi,
I'm after some help with using the top down resource and role planning functionality in EPPM 8.3
When you assign a resource or a role and mark it as committed, where else can I see this information other than the Planning Resources Project details tab in P6 Professional?
I would expect to be able to use this committed (or uncommitted) data for capacity planning, but it doesn't appear to come through into the Capacity planning section.
I've search the Oracle pages for documentation, but there is nothing in the standard documentation about how it should or can be used.
Can anybody help? Specifically the question in bold
Thanks

Also, when you look at this image, you'll see that Dan Sharpe has less availability in April and May. Why is that if it's not blocked out in his resource calendar?
I've summarized all the projects and here's a copy of his assignments when you open the assignments view in P6 Pro, so there's nothing beyond Sep 13

Is there a way to scan a string containing % (percent symbols) using the "Scan from String" function?

I am communicating serially with a chilled mirror device and the input string syntax contains this text: "%RH=<input value>"
I have not been able to figure out how to tell the function that the percent here is not a format specifier. Is this possible, or should I just try to use a different function?
Thanks.
Mitch
Solved!
Go to Solution.

Use %% in your format string so that it knows to use the percent literally. So %%RH=%f
EDIT: Darin got one in there ahead of me. It looks like either \% and %% both work.
Attachments:
Example_VI.png ‏10 KB

Can I use the NI DAQmxbase C functions to develop a Smart Device application using a NI USB or NI ENET 9234 C module with Visual Studio for an iMX31 (ARM 11) embedded computer running Win CE 5.0 or 6.0?

I have an embedded application running on a iMX31 (ARM 11) that does fairly high performance analog input (24 bit, 50K samples/second). I use Microsoft Visual Studio 2005 C/C++ for the develoment environment and have currently built versions of the application for Win CE 5.0 and 6.0 without Labview or NI hardware. I have used the NI 9234 with great success on several Labview applications in the past and I'd like to use the 9234 on this embedded application with VS2005 C/C++. The NI documentation hints that I should be able to do this (maybe I'm overly optimistic) and I'm wondering if anyone else has? I've tried the Evaluation versions of Labview Mobile and Labview Touch panel to build a C application using the NI DAQmx base C function inside Visual Studio without success. I can compile and link the ContAcq IntClk LV example project for an x86 platform using NIDAQmx but not for a ARM platform using NIDAQmxbase.lib. I get the same linker error error LNK2019: unresolved external symbol referred to in Knowledge Base Document ID 4HAEE7QQ even though I've set up (or think I've set up ) VS2005 as the KB article indicates.
If anyone has used the C functions and NIDAQmxbase library inside a VS2005 Smart Device project, I'd greatly appreciate your comments.
Thanks

Hello Gene,
I have been checking into this for you and have found out that what you are trying to do cannot be done. At least not in the current manner you are hoping for. The internal architecture of DAQmx Base requires the cross-compiling capability of the LabVIEW Mobile Module. While a stand-alone compiler can compile DAQmx Base calls for desktop processors, it cannot compile DAQmx Base calls for ARM.
If your application requirements exclude the LabVIEW toolchain, then the remaining option is the USB Driver Development Kit which is avaliable here, but you will have to contact your local field sales representative to discuss support
options as standard phone and e-mail support are not available for the
NI Measurement Hardware DDK.
NI Measurement Hardware Driver Development Kit
http://digital.ni.com/express.nsf/bycode/exyv4w?opendocument&lang=en&node=seminar_US
ColeR
Field Engineer

Error when I try to use the XMLElement(), XMLForest(), etc functions?

I'm getting an "invalid column name" error when I try to use the xmlelement() function (and the like). Is this function only available on 9i Release 2? How do I find the SQLX functions and/or load them up for use? Hopefully someone will see this as a quick question and answer it for me!
Cheers,
Fish

Reply
Sorry. These are not loadable they are core database functionality only available with 9.2.0.1.0 and later..

Using the "Plan a meeting" function in Outlook

Similar Messages

Maybe you are looking for