Using the Preview Slideshow

Is there any way to set the time for displaying a picture using the slideshow feature in Preview. There doesn't seem to be any way to set it in Preview Preferences.

Sorry for the late reply. I've been having issues with my cable connection. The only reason for the Preview slideshow is that I can do a slideshow from the pictures off my memory card, without downloading them to iPhoto. In Preview Preferences, I select "Open all images in one window". I have a card reader & all I do is select the files on the memory card & then Preview slideshow. If you take a bunch of pictures & want to see them right away, without having to download them, for me, it's a lot easier to do a slideshow that way.

Similar Messages

  • Is there a way to use the preview in browser function without an Internet connection?

    This morning our cable modem was down and I was making some changes to a page in a Muse site I'm designing. I wanted to preview the changes in a browser, but when I clicked on the Preview button (or clicked on preview in browser), I received a notification that it was checking for an Internet connection and the preview page never completed. Is there a way to use the preview in browser function in Muse without an Internet connection?

    Thanks for getting back to me! When our cable modem went down, we were still connected to Airport Base Station, and perhaps it appeared to Muse that we did have an Internet connection. In any case, we have now received a new cable modem and our network is working again. As you suggested, I disconnected from the network and tried preview in Muse again, and now it seems to be working just fine. Perhaps it was just the circumstances of our network problem this morning. Good to know I can use the Muse Preview function off-line!

  • How can I use my previews as "masters", wen the masters are irretrievably lost? My idea is to at least be able to save the lost pictures by using the Previews as the new "originals".

    So, yes. Most of my master pictures are gone, long story - please don't ask why. The question now is whether I can use the previews (which are still there) which is surely better than nothing. But except for browsing, there's nothing I can do with them, unless they have a master file connencted. Has anyone got a clue how I could make Aperture treat these remaining preview as master files as well as previews, or in some way make this files useable.
    Thank you very much for your help, if anybody out there has a clue how

    So, yes. Most of my master pictures are gone, long story - please don't ask why.
    I assume, your library is referenced? And the versions are now pointing to missing original master image files?
    Then try the following - for each project separately.:
    Select all images in a  project and drag them from the Bowser to a folder outside the library. This will export the previews as jpegs.
    Now - with the images in the project still selected - use the command "File > Locate Referenced Files" to open the "reconnect" window. In the upper part of the reconnect Window select the first of your images that needs to be reconnected, and in the lower part point it to the corresponding  jpeg you exported. Hold down the alt/options-key⌥ to force the connect-buttons to appear. Press "Connect all".
    Regards
    Léonie
    P.S: If the reconnect buttons refuse to become active, even with the⌥-key held down, check the filenames. The previews should be named exactly like the missing originals. I tried this in Aperture 3.4.5, but I am not sure, if it will work in all Aperture versions the same.

  • Is it legal to use the iPhoto slideshow video inside the third party iPad enterprise application?

    Hi,
       we are developing one enterprise application specifically for iPad.Kindly advise me is it legal to use the iPhoto slideshow video inside the third party iPad enterprise application (slide show with images)?
    Thanks in advance.

    Thanks Terence for your reply. I mean  for "the iPhoto slideshow video" is : I have collection of my own images , using iPhoto software i created a slideshow based on 'origami' theme and exported as a video file. Can I use that video in my enterprise iPad application?
    Thanks.

  • Using the preview button in camera raw

    Im learning to use camera raw via an online tutorial.
    The tutorial explains that the preview button can be toggled on and off to show before and after of changes made in each adjustment panel, and then by going to the presets or snapshots panel I can toggle the preview button to show before and after of all adjustments made to the image.
    However, while this is working for adjustments in the right hand panels - e.g. basic/detail/grayscale etc, when i make an adjustment in the top left and panels e.g. adjustment brush/gradient filter etc and return to to the presets panel and switch the preview P key on and off, these adjustments remain. I would like to be able to preview before and after all changes made to the image - which is what the tutorial is telling me should happen.
    Any suggestions please?!
    Thank you

    Check out this very long thread on this subject:
    Preview Button!!!!

  • Unable to search for first record using the Preview tree

    Post Author: TheBig1980s
    CA Forum: General
    Hello:
    Users are unable to search for the first record in the Preview tab's tree.  The reason for this is because the first record is within the first page header of the report.  My guess is that, by design, Crystal takes the end user to whatever the first instance of the record iseven if that first record is in a page header.  That's not "good".  I want the user to be taken to the first record within the details of the reportnot within the page header.
    I have suppressed the page header to not print on the first record by using OnFirstRecord.  But, I still get the same issue where end users cannot select the first record in the tree without being taken to the page header.  Very strange.
    Can anybody think of any other ideas?
    Thanks!
    TheBig1980s

    Thank you Dave Merchant and try67 for your responses. As per my previous post, I contacted the company re the catalogue and they have responded favourably. I'll include their response because it gives the reason for the search failure as document compression which you might find interesting. I'll await their new catalogue and see if they have fixed the problem.
    Company response:
    Thank you very much for your input.  And yes, you are correct, the compression we used for the current catalogue's PDF format does strip out text included in the catalogue.  We used the compression settings we did with the intention of minimising download time, however I take your point about including text for search purposes (which I also utilise when I'm scanning through PDFs).
    We will actually be posting out our new catalogue next week and we'll release the new PDF version on the website at the same time.  I've asked our graphic designer to ensure that the PDF we use for the new catalogue includes searchable text.

  • Using the "Rehearse Slideshow"

    Im not sure how to phrase this question, but Ill try to explain what it is I want to do.
    Im used to using the "light table" or "navigator" view to look at my slides. When I was doing a presentation on the projectors, I found it hard to view all my slides through the screen that comes up when you're connected to the projector. I was having to flip through all the slides to find the one I needed that corresponded with the music being played (presentation is for church service).
    Is there a way to use a navigator or table view when doing the presentation?

    "Rehearse Slideshow" is used for rehearsing presentations where you plan on using the Presenter Display, but only have one monitor. For what you want do to, simply set your Mac's Display Preferences to monitor spanning (not mirroring), and use the regular Presenter Display settings to see the presenter info on your computer and the presentation on the projector.

  • How can i burn an event to a dvd using the shattered slideshow effect

    Does any one know how to burn an event using the slidshow shattered effect on to a dvd or how do you creat that shattered effect in IDVD?

    While in the slideshow mode use the Share ➙ iDVD menu option.
    OT

  • Saving PDF files as image files using the Preview application

    I'm converting PDF files into image files for use with OCR software. The problem is that changing the pixels/inch option from 150 to say 300 does not improve the resolution of the resulting image file. E.g. if I save at 150 p/i and then 300p/i both image files are the same size and resolution. I've tried JPG, JPG-2000, TIFF, and GIF. All produce the same fuzzy result. What am I doing wrong?

    The schematic file is made up from vector graphics. There are no images embedded in it. For some reason the OCR software (PDF pen) will not recognize the vector drawn characters near the various components. e.g. There may be a resistor with "R5" written next to it. This is the resistors designator. The designator is what I am trying to do the search on. Since PDF pen can perform OCR on scanned (image) documents I thought that turning the PDF schematic into an image file e.g. JPG using Preview would do the trick. Unfortunately as I have already mentioned I can not seem to get Preview to improve the resolution on the resulting image file - the OCR software struggles to recognize any print.

  • Firefox 19.0 PDF data is not showing when we use the Preview in firefox option.

    I am using FireFox 19.0 Version. In my application, I create the adobe PDF and it should shows on click on link button. On previous version it was working. but in 19.0 it is not working.
    In Firefox option i am using preview in firefox option to show the PDF on browser tab.
    Please suggest how can i resolve this problem.

    These solutions to not help our viewers who also have this problem. All they know is the pdf is not displaying correctly and naturally assume there is something wrong with the pdf.
    This function should be disabled until it reliably displays pdfs.

  • Using the loupe causes preview to change

    I pull up a raw in bridge (same thing happens in the preview slideshow btw) and all is good.. but if I use the loupe to magnify once I close the magnify loupe the image totally changes. I'm guessing it's some default but I need help learning how to stop it from happening. I've checked my default for the raw images and it is NOT what I get after closing the zoom.
    Does anyone know what I am talking about?

    Laryl,
    If you really want a 100% or "1:1" sized preview of your camera's rendition of the RAW data instead of Camera Raw's rendition, then shoot in RAW+JPEG mode and put the loupe on the JPEGs.
    It's impossible to see the embedded preview in the loupe because the loop shows a 100% view, and the embedded JPEG previews are not full-size images. I suppose we could disable the loupe if you are viewing an embedded preview, but I'm not sure that would really be helpful.
    The reason that the preview is updated to the Camera Raw render after you use the loupe, even if you have the "Prefer Embedded" turned on is that once we have to generate the 100% preview to show it in the loop, we thought it was worse to have the appearance of the image in the loupe and preview mismatched.
    For example, imagine you have a file with ACR settings which convert it to grayscale, but you are browsing the file in Bridge with Prefer Embedded turned on. When the previews are initially cached you see the embedded, color preview. Then you bring up the loupe. Now, since there is no 100% embedded preview available, we have to get a high-quality preview at 100% from camera raw--which is grayscale. It looks pretty stupid (at least in my opinion) to have a loupe with grayscale pixels over a color preview, so Bridge replaces the embedded preview in the cache with a high quality (grayscale in this case) preview. Now the loupe and preview match. When you are done with the loupe, you could purge cache for the item if you really want the embedded preview to show up again in Bridge.
    The primary goal of Bridge's previews and thumbnails is to literally pre-view what the file looks like when you open it in Photoshop or Camera Raw. Since the Camera Raw dialog is not going to show you the embedded JPEG, by default Bridge doesn't either. The option to show embedded previews is primarily there to speed the editing process. You gain preview-caching speed at the expense of fidelity between the Bridge preview and Camera Raw.
    The ACR defaults only change if you change them, so you are in control of what is going on shoot to shoot. If you want to "bake" the current default into the settings for a RAW file so the appearance doesn't change when you modify the defaults again do the following...
    1. Open the files in the Camera Raw dialog.
    2. Click the Select All button in the filmstrip.
    3. Select "Export Settings to XMP" from the fly-out menu by the settings sliders.

  • Users are not able to save pdfs after editing - Adobe XI. They do not use the Win7 explorer preview pane.  If they completely close the Win7 explorer window, they can save - Adobe XI thinks the preview pane is open when it is not.

    Users are not able to save pdfs after editing.  Product is Adobe XI, OS is Win7 64-bit.  When saving, an error pops up that the file cannot be saved, it is in use.  If they save as a different name, it works.  Found several forums/blogs/etc that suggest the problem can be solved by closing the Window7 explorer preview pane.  They don't use the preview pane.  I figured out that if they completely close the explorer window, they can save.  But this means they have to open and close explorer for each file.

    Hi, I would like to chime in and say that this problem has not yet been resolved. It is extremely annoying when all I do is highlight a document in the file explorer and I get 5 errors (evenly spaced out about 20 seconds apart telling me that "Microsoft
    Word Cannot Start (24)". These errors persist even after windows explorer and word are closed. And I don't want to start terminating processes just to make them stop every time.
    I'm a little frustrated with this problem and the other problems I've encountered with MS Office 2013 with file corruption, crashing, 2010 compatibility issues, and the whole host of errors when trying to actually do WORK with Word.
    I do work with long, complex reports in Word because that's the best way available for myself (and my coworkers) to use. However, I sincerely regret upgrading to Office 2013 because of it. I love it, all of its features, and its interface, but I simply cannot
    use it without problems.
    Submitting an official complaint whenever the phone reps start up again in the morning.

  • Use the image previews generated by InDesign?

    Hello
    I would like to know if its possible to use the preview images that InDesign generate and that are used in the link palette?
    To generate my own previews and caching them can be quite expensive if the document has a lot of large images.
    Best regards
    / Pontus Hulin

    Pallofa,
    Try open img file using some software.
    You need a software to mount the img file.
    http://techie-buzz.com/how-to/mount-iso-files-as-a-virtual-cd-dvd-drive.html
    If thinstead of using an img file, just use this command.
    repair-bde e: d: -rp xxxx-xxxxx-xxxxxx-xxxxx -f -lf c:\log.txt
    where d is the portable disk whereyou want the data and d drive should at least
    equal to e drive.
    Where xxxx-xxxx-xxxxx is the 48 digit recovery password.
    -lf will generate a log file and point to a certain location, here I have pointed to c drive.
    After repair-bde is completed, run chkdsk /f on D drive, then try to access your data.
    Manoj Sehgal

  • How do I get Preview Slideshow to appear in external monitor/projector

    In Preview in Snow Leopard, I could set up a slideshow and use it for presentations through an external monitor or on a screen using a projector. I did this by dragging the Preview window onto the external monitor and then clicking on View/Slideshow. A kind of poor man's PowerPoint presentation, but very quick to set up. Now, unless the displays are mirrored, as soon as I click on View/Slideshow, the slideshow is "sucked" back onto the screen on my MacBook, leaving the external screen blank.
    I have found that there are alternatives to Preview available, like Xee, but with the Preview slideshow feature, only the pictures appear on the screen, with all the background being black, which looks more "professional".
    Does anyone know if there's anything I can do to stop the Preview slideshow ending up back on the MacBook?
    David

    There is something terribly wrong with Lion's support for two monitors, compared to previous Mac OSes, and it looks like you have found another instance of that fact. Oddly enough it seems like QuickLook may work where Preview doesn't. Anyway, I have two monitors and if I move a folder full of images to the secondary monitor, then select the images and right click and then click QuickLook in the Contextual Menu, then click the full screen arrows and the play button, the slideshow will play on the second monitor. If I open the pix in Preview, move the Preview window to the second monitor, and select "Play Slideshow" it promptly moves everything to the main screen, ditto for clicking the full screen arrows within Preview--moves to main monitor and in effect turns off secondary monitor. So give QuickLook a try and see if that will work for your purposes.
    Francine

  • I am using the desktop screensaver and a file from dropbox for photos.  Does the list of screen savers actually use the file, or just link to it.  If I delete the file from the dropbox, will the screen saver be lost?

    Using the desktop slideshow, I have added a file from dropbox for the slideshow.  If I delete the dropbox file, does that delete the file from the list on the slideshow?  Do I need to leave the file on the computer itself rather than in the dropbox and then delete it from the dropbox?

    If you are going to delete the file from Dropbox, you will need the file on your computer.
    You will probably need to put the file in Library/Screen Savers

Maybe you are looking for

  • Whenever I try to run 2-3 programs my computer stars clicking and freezing

    I have a fairly new iMac G5, not the new iMac with front row and the camera. So whenever I try to use, for instance itunes, safari and ichat it will start to freeze then make this weird clicking noise and then unfreeze. Then a minute or so later it w

  • ODI Error While Generating Data services

    Hi, Error occured generating Data services which need's to be published to ESB. Error Details. com.sunopsis.dwg.dataservices.a.e: HTTP/1.1 404 Not Found      at com.sunopsis.dwg.dataservices.a.b.a(b.java)      at com.sunopsis.dwg.dataservices.a.b.e(b

  • Photoshop elements 13 crashes using styles

    Photoshop Elements 13 and Photoshop CS6 both crash when trying to use the styles drop down menu to add styles on my mac with yosemite OS. Photoshop CS6 functioned fine under Mavericks OS so I reinstalled Mavericks but the problem still occurred and I

  • DP91-Debit memo request -selling price

    Dear Friends, the client requirement is to bill the his customer based on the equipment and manpower utilized Now i have created a contract - has assigned the DIP profile in item category and the WBS element is attached in contract item level based o

  • C7280 all in one - cannot scan on Surface 8.1 RT

    I have installed the drivers for the C7280 all in one printer on my surface.  I can print but I cannot scan.  What can I do so that I can utilize the scanning function?