Using the Quiz Review functionality in Captivate 5

I’d like to have a more robust question review in the Captivate 5 quiz I have.
In previous versions of Captivate I could create a quiz, then in the quiz settings click the “Allow user to review quiz” to allow for more robust question review information.
I would then, in each question, double-click (or get properties) for each individual question review area and craft a response. Generally pointing the student to the lesson and slides they need to review in order to get the correct answer for the question.
Can you do this in Captivate 5? All I can see/access is the global review area response which affects all question review areas equally.
Thank you,
TPK

Hi Lilybiri,
Thank you for your response. Here is what I meant when I referred to "loop back"....
It might be better phrased by saying that in Captivate 3 I could use the "go to slide" behavior to "jump to" the same slide I am on. This basically reloads the slide. So, if (in Captivate 3) I am on slide 6 (which is a multiple choice question) and I am in the Advanced answer menu and I select "jump to slide" I might see:
slide 1
slide 2
slide 3
slide 4
slide 5
slide 6
slide 7
slide 8
And, if I want to, I can select the slide I am on (in this example, slide 6). From the student point of view, when they select this wrong answer, then click to advance, slide 6 reloads.
In Captivate 5, when I select Advanced answer and use "jump to slide", this is what I see:
slide 1
slide 2
slide 3
slide 4
slide 5
slide 7
slide 8
There is no option to "jump to" the slide that I am on (in this case, slide 6). (It looks like in Advanced Actions I might be able to pull this trick off, but I am uncertain as to how to use the controls and haven't the time to do a lot of tests.)
You are correct about the work flow. It is difficult for me to change my work flow habits. It seems to take me longer to set the slide items and their characteristics, but I do see the potential in Captivate 5 and overall I like the stability and functionality. Adapting to the (very) different workflow while producing content for a demanding department is a challenge. I'll get used to it over time.
Thank you for your response and the linked information.
TPK

Similar Messages

Using the shared review function with a Captivate including Edge animations

Hello,
We are working on a Captivate (Captivate 8) project that includes several modules of which many of the slides have animations created using Edge. We would like to utilize the shared review but when I publish the course and view the course in the Captivate Reviewer, I can't see the animations. Does it have anything to do with the animations being published as HTML5 animations (.oam)? Any thoughts?
Thank you!

Thank you for confirming that. Do you know if Adobe offers another way to conduct a collaborative review with html5 projects?

I can't use the sticky note function-Help!

I have version 9 and I am not able to makes sticky notes in reviewing the work that is sent to me. I had version 5 where all worked well and recently got a new hard drive and installed Adobe Reader 9. I read that the document has to have permission to make comments and when I go to preferences it says that this document does not have permission....but when I call the person who sent it(graphic artist who works in Quark) -she said that nothing has changed and that it does have permission. Help! What do I do to be able to use the sticky note function again.
Thanks,
Glen
[email protected]

I have noticed a similar problem at my friends computer. The small company he works for has a regular Apple Quad tower running Version Cue 3 w/ Leopard. The system has Adobe Acrobat 9 Professional installed. When he logs in and creates a PDF review, he is able to see the review window open up in Safari with the commenting features. Granted, since he has Adobe 9 Pro, he doesn't need to "Enable the Commenting" feature.
So we tested on his lap top that just had the Adobe Reader 9 (AR9) recently installed on a fresh copy of Tiger 10.4.11. He got his invite email and went to the server and was able to do all the functions except for one: when he went to check out the review and clicked to open the PDF, it came up with an JavaScript error indicating that the: This Document is Available for Review in Acrobat Reader. You must use Adobe Acrobat .. blah blah
So I did the next obvious step and went to AR9 and and "Enabled the Commenting". Saved it as a different document name and re imported it into the Version Cue through Bridge. I went back in and tried to initiate a new review with the updated file. SAME ERROR POPPED UP. Now, I was able to directly open the PDF document that I exported from AR9 on my friend's lap top (solo Reader) and the document loaded successfully.
The users all have the proper permissions. It works on a system with Acrobat but not with just the Reader installed. Any ideas out there?

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems n

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

How do I use the Match Pattern Function to exclude only 0.000?

Hi,
I'm trying to use the mattch pattern function to find the first string in a table thats is >0. My table looks like:
1,0.000000,0.000 %2007/01/13 00:16:19 196281
1,0.000000,0.000 %2007/01/13 00:16:22 196282
1,0.831262,0.000 %2007/01/13 00:17:20 196375
2,0.811154,0.000 %2007/01/13 00:17:20 196375
If I us the paremeter "1,[~0]" It doesn't find the line 1,0.831262,0.000... which is the one that I want. I also tried :1,[0-9].+[~0] and that didn't work either. the problem is that the first digit after to 1, isn't allways going to go from 0 to 0.0 sometimes it might go from 0 to 2.??.
Thanks for the help
Matt

"Matt361" <[email protected]> wrote in message news:[email protected]..
Hi,
 
I'm trying to use the mattch pattern function to find the first string in a table thats is >0. My table looks like:
1,0.000000,0.000 %2007/01/13 00:16:19 196281
1,0.000000,0.000 %2007/01/13 00:16:22 196282
1,0.831262,0.000 %2007/01/13 00:17:20 196375
2,0.811154,0.000 %2007/01/13 00:17:20 196375
If I us the paremeter "1,[~0]" It doesn't find the line 1,0.831262,0.000... which is the one that I want. I also tried :1,[0-9].+[~0] and that didn't work either. the problem is that the first digit after to 1, isn't allways going to go from 0 to 0.0 sometimes it might go from 0 to 2.??.
 
Thanks for the help
Matt
 
Hi,
1,[~0] matches a "1" a "," and then any character that is not "0".
1,[0-9].+[~0] matches a "1" a "," and then any character that is "0-9", any number of anything!! (1 or more) and then anything that is not "0". Note that you have to escape a . to match a ".". Like this "\.".
There is no way to check if there is anything other then a "0" in the match, from within the match pattern function. So I think you won't be able to find a pattern that does the trick.
Why not use a whileloop to find the first item? Or use the Spreadsheet String To Array, and then compare the desired row or column with the string "0.000000"? (Or replace all ,0.000000, by a string like ",NULL,", then match the pattern?)
In LabVIEW 8 there is a new Match Regular Expression function. Haven't tried it, but it should be much more powerfull then the Match Pattern function. But also much more complex.
Regards,
Wiebe.

How To use the going back function in Safari (multitouch)? Going back on Websites ist only possible using the arrow Key on the left corner but not by using the sweep function like it is possible in macOS.

How can i use the going back function in Safari like it is possible in MacOS? On the Mac i can chance back to previous Websites by sweeping with two Fingers. Unfortuntely is this Not possible on the ipad. I tried with one and to fingers but it doesn't work.
The multitouch function is switched on but still Not working. What is wrong? Thx for help.

To go back a web page in Safari touch the screen with one finger at the extreme left and swipe to the right.
To go forward a web page in Safari touch the screen with one finger at the extreme right and swipe to the left.

Is there any way to create a circular buffer using the INSERT ARRAY function?

I saw the example using the REPLACE ARRAY function, but it uses too much CPU power on my laptop. I'm using it for a very sensitive application and saw that the INSERT ARRAY function used much less CPU power.
I am also not wiring the index on the INSERT ARRAY function so that whatever is read from the buffer is added to the array.
However, since it is not indexed, I don't know how to set the "write" index back to 0 when it reaches a certain sized array (ie 1000 elements). I was looking for an array property node, but couldn't figure out if one exists for the "current write index".
Can anyone help?
Thanks

I will try to answer this question to my best understanding. I apologize if I interpreted the question wrong.
You are using the "Insert Array" vi without wiring the index. By doing that, new elements will be added (appended) to the array.
If you just want to know the current index to stop your acquisition when the array reach certain amount of elements, then you can use the "Array Size" vi to keep track of the size of the growing array. Remember that Array Size = last index + 1 because the index start at zero.
A second option is that you may want to start over the array when it hits the maximum number of elements that you will allow. If that's the case, then you may want to re-initialize the array to a NULL state by stablishing a condition (for example, when the
size of the array is 1000, re-initialize). I provided an example attached to this message showing how this can be accomplished. In the example, an 1D array grows in size using the "Insert Array" vi and inserting a random number. When the array reach 4 elements, it is re-initialized. You can expand this example by saving the array first to a file or some other holder before re-initializing the array. The example is in LabVIEW 6.
Finally, if you want to replace the current values with new values, I think you do not have other choice but to use the "Replace Array" vi.
Hope this can be of help.
Regards;
Enrique Vargas
www.vartortech.com
Attachments:
array_example.vi ‏20 KB

Elements 12 Organizer crashes every time I try to use the Photo Mail function. Has anyone else come across this bug?

I highlight the photos I want to share, go to Photo Mail, select the addressees and press "Next". I then get the error message: "Elements Organizer has stopped working" and I have to close the program down.
This is obviously a bug in the program and needs fixing. Has anyone else encountered it and found a solution. (I might add that the same crash happens if I try to use the "Email attachments" function.)

Hi,
Are you running on a Windows system?
If so, use the windows explorer to navigate to one of the following files according to your system.
64bit system: "C:\Program Files (x86)\Adobe\Elements 12 Organizer\PhotoshopElementsOrganizer.exe"
32bit system: "C:\Program Files\Adobe\Elements 12 Organizer\PhotoshopElementsOrganizer.exe"
Right click on that file and select Run as Administrator then try your email again.
You should only have to do this once.
Good luck
Brian

Cannot use the F1-12 functions on my Satellite C55-A-19K

Hello there
Satellite C55-A-19K have an keyboard drivers?
I cannot use the F1-12 functions and cannot get the wireless on since its on the keyboard...
Can some 1 help please?

Hi
The basic setting on these models is that the special functions on the [F1]-[F12] keys are used without [FN].
So for example activating / deactivating the touchpad is done from [F5] (not [FN] [F5])
It is also possible to change this behaviour. Setting the Function-keys to traditional mode in the BIOS will revert back to the keys used along with [FN].
So activating / deactivating the touchpad in traditional function key mode, requires [FN] [F5].
So be sure to check your function key behavoiur - if you have set it to use [FN] first or not.
And keep in mind that in case the current mode is not what you want, you may change it.
Hope this helps
BR Tom
Message was edited by: MannerhagenVPO

Error using the ModelData.fromBinary function in the framework

I have a collada file with animation.
this is how i load and proces it:
public var loader:ColladaLoader;
public function load(url:String):void {
          loader = new ColladaLoader( url );
          loader.addEventListener( Event.COMPLETE, onLoaded );
private function onLoaded(event:Event):void {
manifest   = loader.model.addTo( scene );
          animations = loader.model.animations;
          for each ( var anim:AnimationController in animations ) {
                    anim.bind( scene );
It all works fine!
But because the collada is a realy big file, i thought to use the fromBinary and toBinary functions.
It should be possible to do this.
private function onLoaded(event:Event):void {
          //manifest   = loader.model.addTo( scene );
          //animations = loader.model.animations;
          // create the binary
          var ba:ByteArray = loader.model.toBinary();
          // recreate the ModelData.
          var md:ModelData = ModelData.fromBinary(ba);
          // add to sceneNode.
          md.addTo(scene);
But this error is thrown:
        [Fault] exception, information=Error: Unsupported Element Type
this is fired somewhere from the GenericBinary classes.
Can someone (from adobe help me on this one).
Is it possible to use 'fromBinary' and 'toBinary' with collada files?
When i load a OBJ file it goes well.
Arthur.

Hi,
I dont understand why would you need to use the "bpws:getVariableData" function.
When you are mapping a source-node to a target-node, it usually assigns the value in the source-node to the target-node, which is as good as using the "bpws:getVariableData" function.
So, technically speaking you need to use this function explicitly to achieve that ...
Also, if you want the instance-id, you can use the "ora:getInstanceId()" directly in the BPEL code than using it in the transformation.
Regards,
Madhu.

Is it possible to hide the save function and only use the save as function in teststand

Hi,
When i'm done building a sequence i want to prevent other engineers to save the sequence with the same filename (or version number).
Is it somehow possible to "hide" the save button and only use the save as function?
Or is there another possiblity to solve my problem.
The idea is to have a sequence called Sequence_V1.0.seq which i have build. When installing this in a factory enviroment I would like whenever there is a change needed in the sequence that the version number increases (manual action) (becomes Sequence_V1.1.seq). So from the moment you want to save i would like to only have the function save as. In this way you are obligated to fill in a new sequence name (original sequence will be read-only)
What would even be great if there could be a log of what the changes were
Thx!!!

1) You could mark the file as read-only, by default you would then not be able to save over it. The user could make it not read-only though if they know what they are doing.
2) Another possibility is to lock the sequence file for editing (this is a teststand feature). Go to the Sequence File Property dialog, on the advanced tab, where it says Password Protection, set it to Not Editable and give it a good password. This doesn't however keep someone from saving another file to the same name as the locked one, but they at least won't be able to saved the locked file again without your password, nor will they be able to edit it.
Hope this helps,
-Doug

HT4753 I have a very simple question: how do I view where Lion has autosaved my current version to (without the convoluted route of using finder)? In days gone by i'd simply use the save as function to see where it was being saved.

I have a very simple question: how do I view where Lion has autosaved my current version to (without the convoluted route of using finder)? In days gone by i'd simply use the save as function to see where it was being saved.

It's actually even easier than using Save As to see the full path to the currently open document. Just do a "Secondary click" on the document title in its window's title bar.
Like you, I relied upon Save As my whole life to check a file's location and considered it a must-have capability. Turns out it's even faster to use the single-click method to reveal the full path to the open document. It displays the entire path to the current document starting from the level of your Mac, and works for files stored on drives as well as iCloud.
If you're not sure how to do a secondary click, go into System Preferences, select Trackpad, Point & Click to find the current preference for secondary click on your Mac. If you happen to have a mouse with more than one button, it's probably the right button. As a trackpad user, I check the box to "Click or tap with two fingers," so a simple two finger tap on the title of an open document reveals its full path. This feature actually has been around for a very long time.
Note that this is not the same thing as the Autosave and Versions menu, which is exposed using a little drop down triangle to the right of the title. There is no visual clue for the presence of this feature - you just have to know it's there, probably because this feature goes all the way back to pre-OS X days.

Using the Safe Mode function on your PlayStation 3?

i followed the steps it works fine then when i sign in within a afew seconds it cuts off and gets a red flashing light again i dont know what to do :/

RabidWalker wrote:
Using the Safe Mode function on your PlayStation 3?
Safe Mode:
The option to use Safe Mode on the PlayStation 3 was introduced if a problem occurs where it will no longer start up normally.
To use this feature the console will need to have the System Software update 2.60 (or later).
When to Use Safe Mode?
When starting up the PlayStation 3, and the XMB menu no longer appears (you may see a wavy line on the background instead).
When the PlayStation 3 is started up, nothing appears on screen.
When the PlayStation 3 is started up and you encounter the following message ‘The Hard disk’s file system is corrupted and will be restored’. When selecting ‘OK’ the system restores and restarts, however the same message appears.
When the PlayStation 3 is started up and you encounter the following message ‘The Hard disk’s database will be rebuilt’. When selecting ‘OK’ the system begins the operation and then fails (stopping the restoration of the HDD).
There is an issue after the PlayStation 3 update process is started, or a rebuilding of the database occurs.
Safe Mode procedure:
1)    Ensure the PlayStation 3 is in standby mode (where the red light is apparent), and then turn the console off at the mains switch.
2)    Turn the mains power on, then while in standby touch and hold the power button.
3)    Keep your finger pressed on the power button (after 5 seconds you will hear a beep).
4)    After 10 seconds of holding your finger on the power button, you will hear a second beep and the console will shut down (you can remove your finger).
5)    Touch and hold the power button again.
6)    Again hold your finger down on the button until you hear another beep after 5 seconds.
7)    A number of seconds after this you will hear a double beep- you can remove your finger.
8)    You will be prompted to plug your controller in and press the PS button on your controller. After doing so you will access the Safe Mode menu with a number of options.
Safe Mode Option Screen:
Restart System
Selecting this option will start up the system normally- It will also allow you to exit the Safe Mode Menu.
Restore Default Settings
Selecting this option will restore Default settings on your console (when starting the unit you will be prompted to set time, time zone etc). This option will also delete your PlayStation Network account information from the system.
Your User information will be deleted and restored- the indicator will be an asterix by your username e.g. *RabidWalker.
When logging into your user you will encounter no issues with disc based games. However when attempting to play PSN downloaded games you may encounter the message:
‘To access the system, you must activate the system.
Go to [PlayStation Network] > [Account Management] to activate this system. (80029514). ’
Follow the instruction to activate your PlayStation 3 to play downloaded games (if the system is activated, deactivate and reactivate the system)
Restore File System
This option will begin a process to repair data on your Hard Disk Drive. Therefore it will check for any corrupted data and try and recover this. It the data cannot be recovered it may be erased to ensure that it does not interfere with the operation of the PlayStation 3.
Rebuild Database
If issues continue to persist and you select this option please note that data will be removed during this process.
The following information will removed:
-          Messages
-          Playlists
-          User changes to Information Screens
-          User changes to Picture under Photos
-          Video Thumbnails
-          Video Playback History
-          Video Resume Information
This process may take same time to complete
Restore PS3 System
The option to restore PS3 system is the same as the ‘quick format’ option on the XMB menu. It will reformat the HDD, removing all data and restoring the Hard drive to its original state.
System Update
Selecting this option will install the PlayStation 3 Update but only if the update is on an external media storage device plugged into the console.
This option can be used if any issues are encountered with the installation of the System software update.
If you have any queries regarding this or any other issues please PM me or catch me on Twitter
@RabidWalker
Rabid

Formatting the Quiz Review Area

Is there a way to re-format the font, background, size or any
other appearance aspects in the quiz review area? I know how to
change the messages presented in this area via the Quiz Manager,
but need help with changing the font size, etc.
Speedy reply appreciated - as this is the last touch to a
project due tomorrow. Thanks!

Hi pewinggrim and welcome to our community
Unfortunately, there is very little you can do with this.
Pretty much what you see is what you get. Aside from the text, you
can't really control formatting.
Sorry... Rick

I am using a timed while loop and am unable to get the loop to run at a speed of less than 1ms (I am currently using the Wait(ms) function). How can I get a faster response?

I am trying to create a virtual engine within a timed while loop and am unable to get the loop to run at a speed of less than 1ms (I am currently using the Wait(ms) function). This does not however allow realistic engine speeds. How can I overcome this? I have access to a PCI-MIO-16E-4 board.

andyt writes:
> I am using a timed while loop and am unable to get the loop to run at
> a speed of less than 1ms (I am currently using the Wait(ms) function).
> How can I get a faster response?
>
> I am trying to create a virtual engine within a timed while loop and
> am unable to get the loop to run at a speed of less than 1ms (I am
> currently using the Wait(ms) function). This does not however allow
> realistic engine speeds. How can I overcome this? I have access to
> a PCI-MIO-16E-4 board.
Andy,
Unless you use a real time platform, getting extactly 1 ms loop rate
(or even less) is impossible. It starts getting troublesome at about
0.1 Hz for standard operating systems.
I'd tackle your problem with "if i mod 10 == 0 then sleep 1 ms".
Of
course this is jerky by design.
HTH,
Johannes Nie?

Using the Quiz Review functionality in Captivate 5

Similar Messages

Maybe you are looking for