Using the RB_Split feature in Interface Determination

hi,
I have a 1:N file to IDOC Scenario where I need to do multi-mapping using RB_Split in Interface Determination instead of using CCBPM.
I had done the repository part, but during interface determination, after I select the RB_SPLIT feature, I get "no objects found" when I try to select FIELD_LABEL_SPLTMAP.
Please help!
regards,
Prashanth

Hi Prashanth,
Pls check this from SAP help & verify..
<i>Activities
To execute a mapping-based message split, perform the following steps:
Integration Repository: Define the multi-mapping (see Developing Multi-Mappings for Message Splits).
       1.      Integration Directory: Define the interface determination.
Note the following:
     The outbound interface of the multi-mapping must be entered as the sender interface in the key of the interface determination.
     The interface determination type must be set to Enhanced.
     Select the multi-mapping you defined previously from the Integration Repository.</i>
http://help.sap.com/saphelp_nw04/helpdata/en/42/ed364cf8593eebe10000000a1553f7/frameset.htm
Thanks,
Renjith

Similar Messages

Using the "Capture" Feature?

Hi all,
I'm using a Canon Vixia HF-R100 and trying to use the Capture Feature in the program, but don't know where to start? I've researched around google how to connect the video camera, but I can't get a concrete answer. The camera has a component out which I believe is an IEEE 1394 (a or b?). I trying to hook it up to my 13' MBP as well as my desktop that I think has a Firewire 400. Any help would be great.
PS - When I use this featue does it capture what the camera sees approx. 'real-time' or will I have to record first, then play it back?

function(){return A.apply(null,[this].concat($A(arguments)))}
Malik Gowon wrote:
PS - When I use this featue does it capture what the camera sees approx. 'real-time' or will I have to record first, then play it back?
The answer you were given to this question above is "yes, capture is in real-time" BUT, I think that possibly that poster misunderstood your question. I believe the OP is asking if he can use the capture feature in Premiere to record video "as the camera sees it" instead of having to go to tape/flash first, and then play it back to be captured. To my knowledge, Premiere's capture interface doesn't allow for capture of live video... for something like that you'd use OnLocation which is bundled with Premiere.

I Dont Want To Use The Bounce Feature Anymore : ( Is There Another Way?

Hey Guys!
Im convinced that the bounce feature takes a little something away from your sound of your file. I there a way i can mixdown my song in realtime without using the "bounce" feature. I love WaveBurner but im sure i cant record my project straight to it in "realtime".
A friend of mine says he takes his multitrack project, output it from the soundcard from computer (A) to computer (B) inputs, realtime record it onto a stereo track (most of the time to a 96K format). and then burn THAT file to cd.
That sounds cool i guess but i dont want to run out a buy another computer and soundcard just to achieve this!
Any suggestions?

Have you tried recording back into the same song, onto a new stereo track?
So for instance, go out of your interface, back into your interface, with the new stereo track's inputs set to match. Word of caution... MUTE that stereo track that you will be recording to, or at the very least, turn software monitoring off, or set it's output to "no output".
However, in my experience, the only thing you'll gain from doing that is an extra conversion step, which is never ideal.
Also... how hard are you hitting your main output in Logic? If it's at 0dB, or close to it, that very well may be part of the problem, or why you may feel things sound "wrong". If you are mixing entirely "in the box", keep all your levels VERY conservative, and try to make the loudest points in the song peak out at -6dB or -7dB.
Someone else can explain the technical details... but this practice is important to observe when working in the box entirely. Once I started to adhere to it, my mixes were much more "open", and dynamic. It truly made a huge difference to the sound.
And the lower volume can be made up for in mastering.
If you need a Masterlink, let me know. I have one in mint condition, that I simply do not use anymore. It'll be priced to sell...

Why won't Firefox let me use the 'Enlarge' feature on E bay, when other browsers will?

Firefox will not let me use the feature 'Enlarge' when trying to view products on E bay. It does allow me to use the 'zoom' feature which is odd that it will do one thi9ng, but not the other. I have no problem using the 'enlarge' feature when I use Opera, Sea Monkey or IE7.

Firefox should not modify the Windows mouse settings; that is troubling.
If this problem started around the time of Firefox 30, perhaps it's this:
Firefox 30 switched many plugins from "Always Activate" to "Ask to Activate". The purpose of this change was to require your permission for untrusted sites to use plugins. However, some plugins that affect the user interface and/or operate globally on all pages do not work well with this setting and unpredictable UI breakage can result.
Could you review your plugins as follows:
Open the Add-ons page using either:
* Ctrl+Shift+a
* "3-bar" menu button (or Tools menu) > Add-ons
In the left column, click Plugins. Then I suggest:
* For "in-page"/"player" plugins like Flash, Silverlight, or Java, no changes are needed
* For global plugins like fingerprint readers or security software, switch to either:
** "Always Activate" if you use this plugin on a regular basis
** "Never Activate" if this plugin is not important or very rarely used
If in doubt, set "Never Activate".
This might not take effect immediately in the current window, but should work in new windows, or after you exit and restart Firefox.
Any difference?

How do I use the OCR feature in Acrobat 9?

Does Acrobat 9 have the OCR feature? If so, where do I find it? In Acrobat 8, one would go to Document, OCR Text Recognition, Recognize Test Using OCR, OK. I specifically want to know how to apply OCR to a scanned document in order to use the Find feature.

Simple. go to DOCUMENT, and then select OCR TEXT RECOGNITION.

How to use the "identify" feature in new 6.3.1 airport utility?

how to use the "identify" feature in new 6.3.1 airport utility?
so you can find the basestations in larger networks?

There is a workaround, which is to use Airport Utility 5.6.
I can confirm that 5.6 will run on 10.8.4 Mountain Lion, it will recognize the new 2013 Airport Extreme Base Station (A1521) running firmware 7.7.1, and it will give you access to view the device's Log & Statistics, DHCP Clients, and Profiles.
Four caveats:
1) The easiest way to install it is to download the app itself, not an installer or through the App Store. There is a page here where you can download the app: http://coreyjmahler.com/2013/03/08/airport-utility-5-6-on-os-x-v10-8-mountain-li on/ This way, you still have both versions, Airport Utility 6.x.x and 5.6.
2) When you launch 5.6, you'll get a message saying a newer version is available and asking if you want to update. Click Cancel to proceed into the utility.
3) When you click the Manual Setup button in 5.6, you'll get a warning dialog that "This version of AirPort Utility doesn't support this AirPort wireless device and might improperly configure the device if you continue to use it. Check www.apple.com/support/airport for the latest version of AirPort Utility." You can click Continue to get into the utility without issue.
4) You should probably only use 5.6 to view the additional status details. I have not tried to modify and save any AEBS settings using 5.6. There are other discussions here in the forums indicating that attempting to save settings via 5.6 that are no longer available in 6.3.1 will not actually save the settings to the AEBS even if both utilities indicate that the settings are changed. See https://discussions.apple.com/message/22677993#22677993
So, even though you can't use it to modify settings no longer available in Airport Utility 6.3.1, using Airport Utility 5.6 to view DHCP clients, Logs and Statistics is very useful for troubleshooting network issues.
PS - There are two ways to get to the DHCP Clients list, neither of which is obvious The first is to go to the Airport pane -> Summary tab and click on the "Wireless Clients:" label in the Summary display. All of the labels from "Wireless Mode:" down on the Summary display operate as links to view/edit the corresponding info/settings, which is also not obvious at first glance. Also not obvious, clicking on "Wireless Clients:" actually brings up a new pane with three tabs: Logs, Wireless Clients, and DHCP Clients. You can also get to the same pane by going to the Advanced pane and clicking on the Logs and Statistics button.
I hope this is helpful information. Took me a while to find out how to do this.

HOW TO USE THE PANORAMA FEATURE IN IPHONE 4S, HOW TO USE THE PANORAMA FEATURE IN IPHONE 4S

HOW TO USE THE PANORAMA FEATURE IN IPHONE 4S?

There is no current panorama feature. When iOS 6 is released (Sept. 19) we will find out.

Can I assign several physical storage locations for each virtual machine when using the replication-feature from Hyper-V 2012 R2?

Hi everyone,
I have 2x physical servers running Hyper-V 2012 R2. Each hosts several virtual machines. The VHDs of the VMs are stored on several dedicated physical disks to have a performance boost. For exampe if VM A has two VHDs attached I made sure that the VHDs are
on different physical disks to have them not slow-down each other in case of intensive disk accesses.
So far so good. I was looking forward to the replication-feature. The idea is to have the two physical servers have their primary running VMs being replicated to the other physical server and vice-versa. I was hoping to have the chance to choose for each
individual VM where the replicated VHD will be stored. But instead I can only see the one location/path which is configured in Hyper-V Manager when I activate the replication-feature on the server.
Is there by any chance a way how to select the storage location for each VHD/VM if using the replication-feature of Hyper-V 2012 R2?
Thanks in advance.
Cheers,
Sebastian

Secondly, you could replicate different VMs to different storage locations to perform some of the disk balancing you are trying to perform. Lastly, you could copy the vhd file to a different location
before starting the VM.
.:|:.:|:. tim
Hi Tim,
thanks for the reply. Sorry, but I had some other tasks to take care of, so I wasn't paying enough attention to this thread.
The part I quoted from your reply sounds exactly like the action I'd like to perform, but as you pointed out before this should not be possible.
How can I perform the action (replicating each VM to a storage location) as you mentioned secondly? To sum it up again:
2x physical machines carrying severel HDDs
8+ VMs spread to run on the 2x servers
when setting up replication I can only set the storage-location from server A on B and vice versa B on A
Thanks again for your reply.
Cheers,
Sebastian

I am looking for a specific photo in my event folder, it does not show up, yet when I use the search feature, the photo is there. Why doesn't it show up in the folder?

I am looking for a specific photo in my event folder, it does not show up, yet when I use the search feature the picture is there. Why doesn't it show up in the folder?

What system and iPhoto version are you running?
If your're using iPhoto 9 or later Command (right) - click on the photo in the search window and select Show Event in the Contextual menu.
That will take you to the event where the photo is.
OT

Can I hook my iphone 5 to a touchscreen monitor and use the touchscreen feature of the monitor. Would I have to use the lighting to hdmi?

Can I hook my iphone 5 to a touchscreen monitor and use the touchscreen feature of the monitor. Would I have to use the lighting to hdmi?

The connection of the phone to the monitor would allow you to see, but does not have the ability to translate the touch on the monitor to the phone through that cable.

I have never been able to use the Macmail feature. Running OSX 10.4.11, and the problems appear to be related to the fact that I originally registered my computer with apple, I subsequently changed my e-mail address. Have since upgraded the e-mail addre

I have never been able to use the Macmail feature. Running OSX 10.4.11, and the problems appear to be related to the fact that when I originally registered my computer with apple, I used an old e-mail address which is now defunct. Have since upgraded the e-mail address in account manger, but it still locks me out and rejects my user name and password when I try to log in. It seems it established an account for me automatically when I first fired the beast up, but now the Macmail program is uncooperative with me. Any assistance would be much appreciated, Thanks

Hi rbcjoker76, and a warm welcome to the forums!
Sounds like some needed System Fonts wre replaced by bad ones. Y also have Font Book in Applications for validating fonts & checking for duplicates.
Required Fonts from 10.3, much the same in 10.4...
http://support.apple.com/kb/HT2444?viewlocale=en_US
You may have to get Pacifist...
http://www.charlessoft.com/
then intall the Fonts what you need from your Install Disk.
Or do a relatively painless Archive & Install, which gives you a new/old OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space and no Disk corruption, and is relatively quick & painless...
http://docs.info.apple.com/article.html?artnum=107120
Just be sure to select Preserve Users & Settings.

In version 4.0 I can't use the pinch feature on my trackpad to zoom in and out. Is there a setting in Firefox for this?

I installed v4.0 of Firefox and can no longer use the pinch feature on the trackpad of my MacBook. It seems to work OK in Safart and I'm wondering if there is a setting in Firefox to enable me to use that feature. The way the feature works is that you pinch your thumb & forefinger together or spread them apart to zoom in and out.

Some gestures have been removed in Firefox 4.
You can restore the zoom feature by changing the values of the related prefs on the <b>about:config</b> page.
browser.gesture.pinch.in cmd_fullZoomReduce
browser.gesture.pinch.in.shift cmd_fullZoomReset
browser.gesture.pinch.out cmd_fullZoomEnlarge
browser.gesture.pinch.out.shift cmd_fullZoomReset

I have a new iMac and want to use my HP 7300 All in One and to use the "Fax"feature I need a phone port on computer and of course, this computer does not have one. Are there any aftermarket devices for USB to phone that would work in this case?

I have a new iMac and want to use my HP 7300 "All in One and cannot use the fax feature because there is no phone port is there a solution for this?BACellli

You don't need a phone port on the iMac. The HP 7300 DeskJet Pro has an internal modem, you connect the printer's modem connection directly to your phone line. Please re-read the install directions that came with the printer.

Bought elements 10 last month and can't use the edit feature.

So I got elements 10 with a Wacom Bamboo Capture around April 23rd last month. I created a new adobe id and signed in. It asked me to update my account and add my birthday, personal URL for photoshop, and agree to the terms. Everytime I've tried to do this during the past few weeks I always get an error/failure message. I acknowledge that photoshop is moving to revel and that's probably the reason why I can't complete my sign in. I've already asked adobe with a live chat and they suggested I come here to the forums. Is there any way to use the edit feature now? ele

Just don't use the welcome screen. If you use Windows, go into the program files or program files(x86) for 64-bit systems, find the actual .exe/application file for the editor, right click it and make a desktop shortcut and use that instead of the welcome screen to launch the editor. For macs, it's in applications>adobe photoshop elements 10>support files.

Why can't I use the landscape feature for iPhone 5? It only works in limited apps. I feel as though I wasted my money since I prefer to use my phone in landscape mode.

Why can't I use the landscape feature in all of the apps? It seems like a waste of money since I prefer to use the landscape feature.

It is up to the app developer to decide if the app should work in landscape mode or not. This is also true on Android phones, by the way.

Using the RB_Split feature in Interface Determination

Similar Messages

Maybe you are looking for