Using the scan feature of my hp to my google chrome

I am trying to scan a document from my new HP ENVY 4500 Printer to my Google Chrome.  Does anyone know how to set that up?  

Hi smckenna,
I saw your post about regarding the scanning and I will be happy to help. When you say “Google Chrome” what exactly do you mean? Are you trying to scan to a Chromebook or to your email or something else. The reason I am asking because Google Chrome is a browser (unless your using a Chromebook) and typically you don't scan directly to a browser.
What is your product number?
HP Tablets How Do I Find My Model Number:
http://h30434.www3.hp.com/t5/Windows-Tablets/What-s-the-model-number-for-my-HP-tablet/td-p/3106875
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Similar Messages

  • HT1893 I just bought a MAC and can't figure out how to use the scan feature on my RX580 HP printer.  Can anyone tell me where to find this?  This used to be an option that was obvious under programs with my Dell.  Please someone help!

    I need some help!  I was able to download my HP printer software on to my Macbook Pro, but cannot find the Scan feature on the computer to be able to scan a document.  If someone could LMK what I need to do, or where I need to look to find this I would appreciate it!

    That would be a function of the driver that came with the printer. Make sure you have the latest driver appropriate to your system, either from HP or:
    Printer and Scanner software available for download:
    http://support.apple.com/kb/HT3669?viewlocale=en_US

  • Printing with HP 4215 - Using the scanning feature of the printer

    Is there any work-around in order to be able to scan using my HP4215 with 10.5? This used to work fine with the other 10.x systems of Apple. HP seems to want everybody to just (as usual) throw away their perfectly fine printer in order to recover a feature customer originally paid for and received.

    Hello A:
    Try downloading the latest driver from HP. I have a plain vanilla HP printer (which works fine), but I have read that multi-function printers are not supported by OS X built-in drivers.
    Barry

  • How do I use the OCR feature in Acrobat 9?

    Does Acrobat 9 have the OCR feature?  If so, where do I find it?  In Acrobat 8, one would go to Document, OCR Text Recognition, Recognize Test Using OCR, OK.  I specifically want to know how to apply OCR to a scanned document in order to use the Find feature.

    Simple. go to DOCUMENT, and then select OCR TEXT RECOGNITION.

  • How to use the scan function on a 4215i all in one printer

    How do I use the scan function on this printer with windows 8. I did the installation but the scan function does not seem to wwork 
    This question was solved.
    View Solution.

    Do you have the Officejet 4215 series All-in-One printer?
    If so, then there is no full feature driver for the printer.  The printer is installed using the Windows Update menu of the print drivers.  For information about using the Windows Update driver click here.
    Do you have this printer connected via USB?  If so, then there are workaround methods to get the printer to scan, as the old software package is not available on Windows 8.  In the document linked above, scroll down to the section on how to scan with the Update driver to find information on how to perform these types of scans.  Hope this helps.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    I am not an HP employee.

  • Does the SCAN feature in 11gR2 provide session failover?

    I setup a two-node RAC environment (11.2.0.2), and I can successfully connect to it using Single Client Access Name (SCAN). My clients' tnsnames.ora is as simple as:
    RAC =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = cluster-scan)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = rac)
    I was told by the senior DBA that SCAN provides session failover. By that I mean: suppose there are two nodes, and I have a client establish a connection through sqlplus in another machine (client version 11.2.0.2 as well), eg:
    sqlplus system/password@rac
    I then use something like "SELECT host_name, instance_name FROM v$instance" to figure out which instance I am connected to and I shutdown that instance by running "shutdown abort" there. The expected behavior is for that client to automatically switch to the surviving node (*in the same session*).
    However, it doesn't work that way. Instead, the next SQL statement issued in that sqlplus session results in a "ORA-03113: end-of-file on communication channel." I managed to have it failover automatically, without adding anything (eg: FAILOVER_MODE) in the clients' tnsnames files by creating a service with TAF using srvctl:
    srvctl add service -d rac -s ractaf -P BASIC -m BASIC -e SELECT -z 5 -w 120
    But I have been told this step is not necessary with 11gR2, and session failover should occur automatically if I installed the grid infrastructure and set up SCAN correctly. But I haven't been able to find anything in the documentation indicating this is the case. So, does the SCAN feature in 11gR2 provide session failover?
    Edited by: 894946 on Nov 3, 2011 10:16 AM

    I think you are right because session failover is a service property linked to cluster database instances and not a scan listener feature that basically establish connection with right instance.

  • Where is the scan feature on the M127fm HP printer

    How do I access the scan feature, as I can't seem to find it.?
    This question was solved.
    View Solution.

    Hi,
    You have to scan from its software
    Scan by using the HP Scan software (Windows)
    Use the HP Scan software to initiate scanning from software on your computer. You can save the scanned
    image as a file or send it to another software application.
    1. Load the document on the scanner glass according to the indicators on the product.
    NOTE: For best results, load small-size paper (Letter, A4, or smaller) with the long edge of the paper
    along the left side of the scanner glass.
    2. Click Start, and then click Programs (or All Programs in Windows XP).
    3. Click HP, and then select your product.
    4. Click HP Scan, select a scanning shortcut, and then adjust the settings if necessary.
    5. Click Scan.
    More information including for Mac: page #41 of the following manual:
         http://h10032.www1.hp.com/ctg/Manual/c03628466.pdf
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • I recently purchased an hp photosmart d110a. i cant get the scan feature to work. help!

    i recently purchased an HP Photosmart D110a. I  am using Windows 7 32 bit, SP1. I am direct connected by USB cable. While Print and Copy work fine, the Scan feature (Scan to PC) does not, always returnining the meesage "Try Scan from Computer. I'. I've spent 7 hours over 3 days with Tech Support and Case Manager and nothing has changed. HP replaced the device with a new one, no change. Is anybody else experiencing this problem?
    Any help would be GREATLY appreciated.
    At Wits end.
    Gary

    Not this way, xytor.
    You think we have this amazing ability to look at a 1000+ line program and instantly, mentally debug it? Or are willing to compile and single-step through your code to point out things that are wrong? There's a limit to how lazy you can be and expect help.
    Here's a clue: put lots and lots of System.out.println()s in your code. At every stage, write out the values of variables. Look at the output as your program runs. Maybe that'll give you a clue as to what is going wrong.
    Once you have narrowed down the problem to a particular statement, and you still can't understand why that statement is doing what it is doing, then post a specific question about that statement, and explain exactly what values the variables are before going in to that statement, and what comes out, and what you think should come out. Then we can explain why it's doing what it's doing.
    OK?

  • How to use the "identify" feature in new 6.3.1 airport utility?

    how to use the "identify" feature in new 6.3.1 airport utility?
    so you can find the basestations in larger networks?

    There is a workaround, which is to use Airport Utility 5.6.
    I can confirm that 5.6 will run on 10.8.4 Mountain Lion, it will recognize the new 2013 Airport Extreme Base Station (A1521) running firmware 7.7.1, and it will give you access to view the device's Log & Statistics, DHCP Clients, and Profiles.
    Four caveats:
    1) The easiest way to install it is to download the app itself, not an installer or through the App Store. There is a page here where you can download the app: http://coreyjmahler.com/2013/03/08/airport-utility-5-6-on-os-x-v10-8-mountain-li on/ This way, you still have both versions, Airport Utility 6.x.x and 5.6.
    2) When you launch 5.6, you'll get a message saying a newer version is available and asking if you want to update. Click Cancel to proceed into the utility.
    3) When you click the Manual Setup button in 5.6, you'll get a warning dialog that "This version of AirPort Utility doesn't support this AirPort wireless device and might improperly configure the device if you continue to use it. Check www.apple.com/support/airport for the latest version of AirPort Utility." You can click Continue to get into the utility without issue.
    4) You should probably only use 5.6 to view the additional status details. I have not tried to modify and save any AEBS settings using 5.6. There are other discussions here in the forums indicating that attempting to save settings via 5.6 that are no longer available in 6.3.1 will not actually save the settings to the AEBS even if both utilities indicate that the settings are changed. See https://discussions.apple.com/message/22677993#22677993
    So, even though you can't use it to modify settings no longer available in Airport Utility 6.3.1, using Airport Utility 5.6 to view DHCP clients, Logs and Statistics is very useful for troubleshooting network issues.
    PS - There are two ways to get to the DHCP Clients list, neither of which is obvious The first is to go to the Airport pane -> Summary tab and click on the "Wireless Clients:" label in the Summary display. All of the labels from "Wireless Mode:" down on the Summary display operate as links to view/edit the corresponding info/settings, which is also not obvious at first glance. Also not obvious, clicking on "Wireless Clients:" actually brings up a new pane with three tabs: Logs, Wireless Clients, and DHCP Clients. You can also get to the same pane by going to the Advanced pane and clicking on the Logs and Statistics button.
    I hope this is helpful information. Took me a while to find out how to do this.

  • HOW TO USE THE PANORAMA FEATURE IN IPHONE 4S, HOW TO USE THE PANORAMA FEATURE IN IPHONE 4S

    HOW TO USE THE PANORAMA FEATURE IN IPHONE 4S?

    There is no current panorama feature.  When iOS 6 is released (Sept. 19) we will find out.

  • Can I assign several physical storage locations for each virtual machine when using the replication-feature from Hyper-V 2012 R2?

    Hi everyone,
    I have 2x physical servers running Hyper-V 2012 R2. Each hosts several virtual machines. The VHDs of the VMs are stored on several dedicated physical disks to have a performance boost. For exampe if VM A has two VHDs attached I made sure that the VHDs are
    on different physical disks to have them not slow-down each other in case of intensive disk accesses.
    So far so good. I was looking forward to the replication-feature. The idea is to have the two physical servers have their primary running VMs being replicated to the other physical server and vice-versa. I was hoping to have the chance to choose for each
    individual VM where the replicated VHD will be stored. But instead I can only see the one location/path which is configured in Hyper-V Manager when I activate the replication-feature on the server.
    Is there by any chance a way how to select the storage location for each VHD/VM if using the replication-feature of Hyper-V 2012 R2?
    Thanks in advance.
    Cheers,
    Sebastian

    Secondly, you could replicate different VMs to different storage locations to perform some of the disk balancing you are trying to perform.  Lastly, you could copy the vhd file to a different location
    before starting the VM.
    .:|:.:|:. tim
    Hi Tim,
    thanks for the reply. Sorry, but I had some other tasks to take care of, so I wasn't paying enough attention to this thread.
    The part I quoted from your reply sounds exactly like the action I'd like to perform, but as you pointed out before this should not be possible.
    How can I perform the action (replicating each VM to a storage location) as you mentioned secondly? To sum it up again:
    2x physical machines carrying severel HDDs
    8+ VMs spread to run on the 2x servers
    when setting up replication I can only set the storage-location from server A on B and vice versa B on A
    Thanks again for your reply.
    Cheers,
    Sebastian

  • I am looking for a specific photo in my event folder, it does not show up, yet when I use the search feature, the photo is there.  Why doesn't it show up in the folder?

    I am looking for a specific photo in my event folder, it does not show up, yet when I use the search feature the picture is there.  Why doesn't it show up in the folder?

    What system and iPhoto version are you running?
    If your're using iPhoto 9 or later  Command (right) - click on the photo in the search window and select Show Event in the Contextual menu. 
    That will take you to the event where the photo is.
    OT

  • Can I hook my iphone 5 to a touchscreen monitor and use the touchscreen feature of the monitor. Would I have to use the lighting to hdmi?

    Can I hook my iphone 5 to a touchscreen monitor and use the touchscreen feature of the monitor. Would I have to use the lighting to hdmi?

    The connection of the phone to the monitor would allow you to see, but does not have the ability to translate the touch on the monitor to the phone through that cable.

  • I have never been able to use the Macmail feature.  Running OSX 10.4.11, and the problems appear to be related to the fact that I originally registered my computer with apple, I subsequently changed my e-mail address.  Have since upgraded the e-mail addre

    I have never been able to use the Macmail feature.  Running OSX 10.4.11, and the problems appear to be related to the fact that when I originally registered my computer with apple, I used an old e-mail address which is now defunct.  Have since upgraded the e-mail address in account manger, but it still locks me out and rejects my user name and password when I try to log in.  It seems it established an account for me automatically when I first fired the beast up, but now the Macmail program is uncooperative with me.  Any assistance would be much appreciated, Thanks

    Hi rbcjoker76, and a warm welcome to the forums!
    Sounds like some needed System Fonts wre replaced by bad ones. Y also have Font Book in Applications for validating fonts & checking for duplicates.
    Required Fonts from 10.3, much the same in 10.4...
    http://support.apple.com/kb/HT2444?viewlocale=en_US
    You may have to get Pacifist...
    http://www.charlessoft.com/
    then intall the Fonts what you need from your Install Disk.
    Or do a relatively painless Archive & Install, which gives you a new/old OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space and no Disk corruption, and is relatively quick & painless...
    http://docs.info.apple.com/article.html?artnum=107120
    Just be sure to select Preserve Users & Settings.

  • In version 4.0 I can't use the pinch feature on my trackpad to zoom in and out. Is there a setting in Firefox for this?

    I installed v4.0 of Firefox and can no longer use the pinch feature on the trackpad of my MacBook. It seems to work OK in Safart and I'm wondering if there is a setting in Firefox to enable me to use that feature. The way the feature works is that you pinch your thumb & forefinger together or spread them apart to zoom in and out.

    Some gestures have been removed in Firefox 4.
    You can restore the zoom feature by changing the values of the related prefs on the <b>about:config</b> page.
    browser.gesture.pinch.in cmd_fullZoomReduce
    browser.gesture.pinch.in.shift cmd_fullZoomReset
    browser.gesture.pinch.out cmd_fullZoomEnlarge
    browser.gesture.pinch.out.shift cmd_fullZoomReset

Maybe you are looking for