Using the Skip Question Function in Quizzes
I am using Captivate 3. My users want to be able to go
through a graded quiz, skip questions and return to answer them
later --before their score is final. The help screens indicate that
this is possible:
"If you want to give users the opportunity to skip a question
and return to answer it at a later time, add a Skip button. This
button is optional, but can give users greater navigation control
as they work through quizzes."
After users answer the last question in a quiz, the Results
screen appears and it is not possible for them to return to the
skipped questions.
What advice do you have about effectively using the Skip
function and explaining it clearly to users?
Thanks,
Hi evons
I am going to go out on a very shaky limb here (to quote from
another post many moons ago).
Add another slide just before your Results slide with a
button that takes users back to the first question slide, thus
allowing them to work through all the questions again. Haven't
tested this, but the theory works for me. Obviously you would also
have a Continue burron on the same slide that moves forward to the
results slide.
Being a vary lazy type by nature, I would appreciate it if
you could let me know on the success or failure of the above. Thus
alleviating my need to test the same :)
PS Any of you other geniuses out there with another idea are
welcome to climb in on this one!!!
Similar Messages
-
I have a very simple question: how do I view where Lion has autosaved my current version to (without the convoluted route of using finder)? In days gone by i'd simply use the save as function to see where it was being saved.
It's actually even easier than using Save As to see the full path to the currently open document. Just do a "Secondary click" on the document title in its window's title bar.
Like you, I relied upon Save As my whole life to check a file's location and considered it a must-have capability. Turns out it's even faster to use the single-click method to reveal the full path to the open document. It displays the entire path to the current document starting from the level of your Mac, and works for files stored on drives as well as iCloud.
If you're not sure how to do a secondary click, go into System Preferences, select Trackpad, Point & Click to find the current preference for secondary click on your Mac. If you happen to have a mouse with more than one button, it's probably the right button. As a trackpad user, I check the box to "Click or tap with two fingers," so a simple two finger tap on the title of an open document reveals its full path. This feature actually has been around for a very long time.
Note that this is not the same thing as the Autosave and Versions menu, which is exposed using a little drop down triangle to the right of the title. There is no visual clue for the presence of this feature - you just have to know it's there, probably because this feature goes all the way back to pre-OS X days. -
Is there any way to create a circular buffer using the INSERT ARRAY function?
I saw the example using the REPLACE ARRAY function, but it uses too much CPU power on my laptop. I'm using it for a very sensitive application and saw that the INSERT ARRAY function used much less CPU power.
I am also not wiring the index on the INSERT ARRAY function so that whatever is read from the buffer is added to the array.
However, since it is not indexed, I don't know how to set the "write" index back to 0 when it reaches a certain sized array (ie 1000 elements). I was looking for an array property node, but couldn't figure out if one exists for the "current write index".
Can anyone help?
ThanksI will try to answer this question to my best understanding. I apologize if I interpreted the question wrong.
You are using the "Insert Array" vi without wiring the index. By doing that, new elements will be added (appended) to the array.
If you just want to know the current index to stop your acquisition when the array reach certain amount of elements, then you can use the "Array Size" vi to keep track of the size of the growing array. Remember that Array Size = last index + 1 because the index start at zero.
A second option is that you may want to start over the array when it hits the maximum number of elements that you will allow. If that's the case, then you may want to re-initialize the array to a NULL state by stablishing a condition (for example, when the
size of the array is 1000, re-initialize). I provided an example attached to this message showing how this can be accomplished. In the example, an 1D array grows in size using the "Insert Array" vi and inserting a random number. When the array reach 4 elements, it is re-initialized. You can expand this example by saving the array first to a file or some other holder before re-initializing the array. The example is in LabVIEW 6.
Finally, if you want to replace the current values with new values, I think you do not have other choice but to use the "Replace Array" vi.
Hope this can be of help.
Regards;
Enrique Vargas
www.vartortech.com
Attachments:
array_example.vi 20 KB -
Locking at request of OP - https://support.mozilla.com/en-US/questions/844506
Are we allowed to use the Web developer function, under the "Firefox" tab in Firefox version 5.0, to edit the html source code associated with the Firefox version 5.0 home page ( so that we can personalize the home page )? Is this legal?
Sincerely in Christ,
Russell E. WillisSolution: (Free Download Manager)
Go here: http://codecpack.co/download/Free_Download_Manager.html and download Free Download Manager 3.8.1067 Beta 3, it works perfectly with Firefox 5.0.1
Solution: (to Google mail aka Gmail)
I have had this problem for a while since I did a previous Firefox update, where I had to force Gmail to load in Basic HTML else it's next to impossible to use it. The solution is this: simply update your Java, and Gmail will work without a problem using Standard HTML. To update your Java go here: http://www.java.com/en/ and select "Free Java Download".
And beta normally, universally, means "the not quite there yet version of the version we're aiming for" NORMALLY used during production and testing of a type of software. -
Using the photomerge panorama function in Elements 10
I have just installed Elements 10 and when trying to use the Photomerge Panorama function the whole programme shuts down. I have tried re-installing the programme and the problem is still there. I have tried using the instructions fron The Dummies handbook but the problem persists.
I've moved your question to the Photoshop Elements forum to get the best results.
-
In WSE12 R1 you can install the connector application on a Windows 7 PC that has already been joined to a corporate domain using the skip domain registry key:
reg add "HKLM\SOFTWARE\Microsoft\Windows Server\ClientDeployment" /v SkipDomainJoin /t REG_DWORD /d 1
Upon doing so, the client PC is then able to perform client backups to the WSE12 R1 server but remains a member of the original corporate domain. This is no longer possible when using this registry key when installing the Windows Server 2012 Essentials
R2 connector
Is anyone aware of a way to install the WSE12 R2 connector and skip domain join without first leaving the corporate domain?
I am avoiding moving to WSE12 R2 until I can figure out a way to accomplish this.I noticed this was incorrectly marked as an ANSWER. Although it wasn't a resolution, I recognize the connector install behavior is different in R1 vs R2. If it would be possible to ask the developers to include the following functionality in a future
Essentials R2 Update, we'd appreciate it. During client connector install, give user the option via radio button: 1.) install connector join domain, enable client PC backup 2.) install connector, join domain only, no client PC backup 3.) install connector,
do not join domain, enable client PC backup Option #3 would satisfy this request and negate the need for unauthorized registry hacks. Thank you.
Great discussion here, and glad things seem to have changed for the better with R2.
Spot on with those suggestions, miles267!
Back in Dec 2013, I wrote about my fairly simple registry tweak done at just the right spot during the client connector install, still seems to work like a charm
(as of Dec 12 2014, ~15,000 folks read it so far):
TinkerTry.com/connect
which redirects to:
http://www.tinkertry.com/how-to-make-windows-server-2012-r2-essentials-client-connector-install-behave-just-like-windows-home-server
with a lot of (admittedly confusing) comments:
http://www.tinkertry.com/how-to-make-windows-server-2012-r2-essentials-client-connector-install-behave-just-like-windows-home-server/#comment-1705687227
Sincerely hoping such feedback helps encourage Microsoft to take a simple radio box checkmark request seriously. Really, it'd really help folks a lot, so they wouldn't have to feel they are trusting a "hack" which is really a simple, documented
registry tweak, done at just the right time.
I hope this little post here, and my article, truly helped people out! -
There's any example of using the gateway plugin functionality?
Hello again!!! xD
There's any example of using the gateway plugin functionality?To put your custom media element loaded from a plugin on the stage, you can use a MediaContainer object:
var adContainer:MediaContainer;
adContainer.width = 468;
adContainer.height = 60;
adContainer.addMediaElement(adElement);
addChild(adContainer); // assuming we're on a Sprite.
The video element can be in its own container:
var videoContainer:MediaContainer;
videoContainer.width = 468;
videoContainer.height = 60;
videoContainer.addMediaElement(videoElement);
addChild(videoContainer);
Regardless of wheter or not the adElement and videoElement are in a parallel element together, each indiviual view will appear in the assigned container.
Does that anwer your question?
Cheers,
Edwin -
Using the wwsec_api.set_user_acl function
I am trying to set the access for a user using the wwsec_api.set_user_acl function. The code I am using is as follows :
wwsec_api.set_user_acl(
p_person_id=>3,
p_object_type_name=>ANYGROUP_OBJ,
p_owner=>wwctx_api.get_product_schema,
p_name=>'78',
p_privilege=>MANAGE_PRIV);
I am trying to grant access to the user to manage all groups and users (the example above is for groups). However the p_name parameter column will only allow me to reference one object (I think). Could you advise me on what code I should use to grant access to a user to manage all users and groups.
Thanks in advance!
nullTom,
This question is better suited to the Oracle9iAS SSO and Portal Security forum.
Thanks -
Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected] -
How do I use the Match Pattern Function to exclude only 0.000?
Hi,
I'm trying to use the mattch pattern function to find the first string in a table thats is >0. My table looks like:
1,0.000000,0.000 %2007/01/13 00:16:19 196281
1,0.000000,0.000 %2007/01/13 00:16:22 196282
1,0.831262,0.000 %2007/01/13 00:17:20 196375
2,0.811154,0.000 %2007/01/13 00:17:20 196375
If I us the paremeter "1,[~0]" It doesn't find the line 1,0.831262,0.000... which is the one that I want. I also tried :1,[0-9].+[~0] and that didn't work either. the problem is that the first digit after to 1, isn't allways going to go from 0 to 0.0 sometimes it might go from 0 to 2.??.
Thanks for the help
Matt"Matt361" <[email protected]> wrote in message news:[email protected]..
Hi,
I'm trying to use the mattch pattern function to find the first string in a table thats is >0. My table looks like:
1,0.000000,0.000 %2007/01/13 00:16:19 196281
1,0.000000,0.000 %2007/01/13 00:16:22 196282
1,0.831262,0.000 %2007/01/13 00:17:20 196375
2,0.811154,0.000 %2007/01/13 00:17:20 196375
If I us the paremeter "1,[~0]" It doesn't find the line 1,0.831262,0.000... which is the one that I want. I also tried :1,[0-9].+[~0] and that didn't work either. the problem is that the first digit after to 1, isn't allways going to go from 0 to 0.0 sometimes it might go from 0 to 2.??.
Thanks for the help
Matt
Hi,
1,[~0] matches a "1" a "," and then any character that is not "0".
1,[0-9].+[~0] matches a "1" a "," and then any character that is "0-9", any number of anything!! (1 or more) and then anything that is not "0". Note that you have to escape a . to match a ".". Like this "\.".
There is no way to check if there is anything other then a "0" in the match, from within the match pattern function. So I think you won't be able to find a pattern that does the trick.
Why not use a whileloop to find the first item? Or use the Spreadsheet String To Array, and then compare the desired row or column with the string "0.000000"? (Or replace all ,0.000000, by a string like ",NULL,", then match the pattern?)
In LabVIEW 8 there is a new Match Regular Expression function. Haven't tried it, but it should be much more powerfull then the Match Pattern function. But also much more complex.
Regards,
Wiebe. -
How can i use the going back function in Safari like it is possible in MacOS? On the Mac i can chance back to previous Websites by sweeping with two Fingers. Unfortuntely is this Not possible on the ipad. I tried with one and to fingers but it doesn't work.
The multitouch function is switched on but still Not working. What is wrong? Thx for help.To go back a web page in Safari touch the screen with one finger at the extreme left and swipe to the right.
To go forward a web page in Safari touch the screen with one finger at the extreme right and swipe to the left. -
I highlight the photos I want to share, go to Photo Mail, select the addressees and press "Next". I then get the error message: "Elements Organizer has stopped working" and I have to close the program down.
This is obviously a bug in the program and needs fixing. Has anyone else encountered it and found a solution. (I might add that the same crash happens if I try to use the "Email attachments" function.)Hi,
Are you running on a Windows system?
If so, use the windows explorer to navigate to one of the following files according to your system.
64bit system: "C:\Program Files (x86)\Adobe\Elements 12 Organizer\PhotoshopElementsOrganizer.exe"
32bit system: "C:\Program Files\Adobe\Elements 12 Organizer\PhotoshopElementsOrganizer.exe"
Right click on that file and select Run as Administrator then try your email again.
You should only have to do this once.
Good luck
Brian -
Cannot use the F1-12 functions on my Satellite C55-A-19K
Hello there
Satellite C55-A-19K have an keyboard drivers?
I cannot use the F1-12 functions and cannot get the wireless on since its on the keyboard...
Can some 1 help please?Hi
The basic setting on these models is that the special functions on the [F1]-[F12] keys are used without [FN].
So for example activating / deactivating the touchpad is done from [F5] (not [FN] [F5])
It is also possible to change this behaviour. Setting the Function-keys to traditional mode in the BIOS will revert back to the keys used along with [FN].
So activating / deactivating the touchpad in traditional function key mode, requires [FN] [F5].
So be sure to check your function key behavoiur - if you have set it to use [FN] first or not.
And keep in mind that in case the current mode is not what you want, you may change it.
Hope this helps
BR Tom
Message was edited by: MannerhagenVPO -
Error using the ModelData.fromBinary function in the framework
I have a collada file with animation.
this is how i load and proces it:
public var loader:ColladaLoader;
public function load(url:String):void {
loader = new ColladaLoader( url );
loader.addEventListener( Event.COMPLETE, onLoaded );
private function onLoaded(event:Event):void {
manifest = loader.model.addTo( scene );
animations = loader.model.animations;
for each ( var anim:AnimationController in animations ) {
anim.bind( scene );
It all works fine!
But because the collada is a realy big file, i thought to use the fromBinary and toBinary functions.
It should be possible to do this.
private function onLoaded(event:Event):void {
//manifest = loader.model.addTo( scene );
//animations = loader.model.animations;
// create the binary
var ba:ByteArray = loader.model.toBinary();
// recreate the ModelData.
var md:ModelData = ModelData.fromBinary(ba);
// add to sceneNode.
md.addTo(scene);
But this error is thrown:
[Fault] exception, information=Error: Unsupported Element Type
this is fired somewhere from the GenericBinary classes.
Can someone (from adobe help me on this one).
Is it possible to use 'fromBinary' and 'toBinary' with collada files?
When i load a OBJ file it goes well.
Arthur.Hi,
I dont understand why would you need to use the "bpws:getVariableData" function.
When you are mapping a source-node to a target-node, it usually assigns the value in the source-node to the target-node, which is as good as using the "bpws:getVariableData" function.
So, technically speaking you need to use this function explicitly to achieve that ...
Also, if you want the instance-id, you can use the "ora:getInstanceId()" directly in the BPEL code than using it in the transformation.
Regards,
Madhu. -
How to change the response of human task if we are using the skip rule
Hi,
We have developed the request workflow in OIM11g for this we are using the Beneficiary Manager approval composite to approve the request by his manager.
We are using the skip rule in the human task component to skip the user if the requester is beneficiary manager.
After the skip rule is executing the the request is going to failed state because of the response it is sending to the OIM
The skip rule is working as expected but the response sending to OIM is COMPLETED instead of APPROVE.
Please let us know the steps to change the response to Approve after the skip rule is executed or how to add the response COMPLETED in OIM.
ThanksYou will have to write a conditional block outisde the task where you would check if the skip condition is met and if yes then you will have to hard code the approved conditions into the payload for the task outcome.
<assign name="SetAutoApproveConditions">
<copy>
<from expression="string('APPROVE')"/>
<to variable="ApprovalTask_1_globalVariable"
part="payload"
query="/task:task/task:systemAttributes/task:outcome"/>
</copy>
<copy>
<from expression="string('COMPLETED')"/>
<to variable="ApprovalTask_1_globalVariable"
part="payload"
query="/task:task/task:systemAttributes/task:state"/>
</copy>
</assign>HTH,
BB
Maybe you are looking for
-
Adobe Album versus iphoto organizing
I may be crazy, but I cannot figure this out...I have been using Photoshop Album on my PC. In Album, you can view/sort your photos by the folder they are in - meaning, when I uploaded my images to my PC using my Canon camera software, it put the imag
-
Need widescreen, not letterbox, when hooking up to TV through composite
I've read a few unanswered posts on this subject. I have a macbook that I want to hook up to a HDTV through a mini-DVI to composite adaptor. When I do this it restricts the available resolutions to letterbox (4:3) resolutions (640x480, 1024x768, etc.
-
I want to install Flash in OS X 10.5.8
I have uninstalled the older version. Can't figure out which to install.
-
Yosemite Mail crashes multiple times a day
Has anyone else been running into Yosemite Mail app crashing often, like multiple times a day? It leaves crash dumps you can get to via Console app. Most dump filenames end with cpu_resource.diag, some with just .crash or .hang. I just installed Yose
-
When I try to update iPhoto it says that the update was issued to a different Apple ID
I updated my Mac and then I lost access to my old iPhoto. It won't let me update the new one either and says that the update was issues to a different Apple ID. No other apple ID has ever been used on this computer....