Using the sound enhancer with the preset equalizer settings

How do I use the 'sound enhancer' along with the preset equalizer settings, like 'rock', etc.?

Hello, Troy.
Below is the article about the iTunes sound adjustment feature that you may find helpful.
iTunes 11 for Mac: Adjust the sound quality
http://support.apple.com/kb/PH12134
Cheers,
Jason H.

Similar Messages

Working in Logic 9, how do I use a drum loop WITH ITS PRESET EFFECTS? I can drag and drop the loop but it plays dry in timeline. thanks

Working in Logic 9, how do I use a drum loop WITH ITS PRESET EFFECTS? I can drag and drop the loop but it plays dry in timeline. thanks

Here's the short-cut solution:
Green Apple tracks are MIDI files (so to speak). If you drag one from the loop browser (Capitol C Orchestral hit, as you mentioned in this exable) directly into the arrange page it creates the MIDI file and the instrument to play it back on.
HOWEVER.If you create and audio track first, THEN drag the green Apple loop onto that track, the loop will get "bounced" with the reverb in tact and you'll have the exact sound that you heard in the preview.
Make sense?

When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?

When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?

Hi Brian,
Thanks restoring and restarting didn't fix my problem - i have started it fresh and still it doesn't work. Basically I press ONCE on the remote, after the machine has not had any commands for 10 minutes, and the cursor skips from one end of the menu to the other - so I can't choose network or update software etc - I sometimes manage to stop it randomly in the middle of the menu if I press on a command in the middle of the cursor skipping all the menu steps...not sure what the problem is but I have basically not used my brand new apple tv since I bought it for that reason! I should call Apple support I suppose! grrrr hate wasting time with stuff like this!
Thanks for your help though!
Pernille

I want to use the sound card with LabView

Hi. Who can help me, I want to use the sound card with LabView, I have found the function but I can't use it. Thanks.

Christi,
In LabVIEW 6.1 I found some examples they use those sound VIs. They are located in \examples\sound folder. Those examples should give you a good overview how to use the VIs.
Hope this helps
Roland

MB466 sound card with the MB990 is not the same?

MB466 sound card with the MB990 is not the same?
MB466 Audio Equipment ID:0x10DECB79 Audio ID:63
MB990 Audio Equipment ID:0x10DECB79 Audio ID:77

You can enable ClearType system wide for all programs to make other programs like Firefox use it.
* http://support.microsoft.com/kb/306527 - HOW TO: Use ClearType to Enhance Screen Fonts in Windows XP
Control Panel > Display > Appearance > Effects: "Use the following method to smooth edges of screen fonts"

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.
In particular, I am analyzing the example "Even Angle Reference Signal Processing (Digital Tacho, DAQmx).vi", whose documentation I am reproducing in the following:
DESCRIPTIONS:
This VI demonstrates how to extract even angle reference signals and remove the slow-roll errors. It uses DAQmx VIs to acquire sound or vibration signals and a digital tachometer signal. This VI includes a two-step process: acquire data at low rotational speed to extract even angle reference; use the even angle reference to remove the errors in the vibration signal acquired at normal operation.
INSTRUCTIONS:
1. Run the VI.
2. On the DAQ Configurations tab, specify the sample rate, samples per channel, device and channel configurations, and tachometer channel information.
NOTE: You need to use DSA PXI-447x/PXI-446x and PXI TIO device in a PXI chassis to run this example. The DSA device must be in slot 2 of the PXI chassis.
3. Switch to Extract Even Angle Reference tab. Specify the number of samples to acquire and the # of revs in reference which determines the number of samples in even angle reference. Click Start to take a one-shot data acquisition of the vibration and tachometer signals. After the acquisition, you can see the extracted even angle references in Even Angle Reference.
4. Switch to the Remove Slow-roll Errors tab. Click Start to acquire data continuously and view the compensate results. Click Stop in this tab to stop the acquisition.
ORDER ANALYSIS VIs USED IN THIS EXAMPLE:
1. SVL Scale Voltage to EU.vi
2. OAT Digital Tacho Process.vi
3. OAT Get Even Angle Reference.vi
4. OAT Convert to Even Angle Signal.vi
5. OAT Compensate Even Angle Signal.vi
My question is: How is the synchronization produced at the time of the compensation ? How is it possible to eliminate the errors in a synchronized fashion with respect to the surface of the shaft bearing in mind that I am acquired data at a low rotation speed in order to get the "even angle reference" and then I use it to remove the errors in the vibration signal acquired at normal operation. In this application both operations are made in different acquisitions, therefore the reference of the correction signal is lost. Is it simply compensated without synchronizing ?
Our application is based on FPGA and we need to clarity those aspects before implementing the procedure.
Solved!
Go to Solution.

Hi CracKatoA.
Take a look at the link bellow:
http://forums.ni.com/ni/board/message?board.id=170&message.id=255126&requireLogin=False
Regards,
Filipe Silva

Issues with using aftermarket 2G chargers with the iphone

I was using my iphone 3GS last night and battery was over 90% I had just gotten done shooting some video and I was on my PC trying to figure what I needed to do to upload the video to YouTube. I pulled iPhone out of my pocket it was completely dead. I tried soft reset and hard reset with no luck. I thought maybe I had misread how charged the battery was and it had just died. When I got home I plugged it and let it charge overnight on an aftermarket charger. When I woke up this morning same thing. No power, no response( I tried plugging it into the wall and into the USB port of my laptop) I also tried soft reset and hard reset again this morning still no luck. I had been using an after market home charger that I had purchased with my original iPhone 2g. It seemed to work with no problems on the new phone and I had used it everynight for the last week or so.
As a last resort I put my iPhone in a new case-mate charger/holster I had just purchased and finally it gives me the battery charging icon. My conclusion is that the after market charge I have will work OK for charging a low battery to full again but if the phone is completely dead then maybe only an original charger will work. The problem is I have USB cables and home charges and car chargers from my iPhone 2g and my iPod touch and I assumed they would all work and were interchangeable but now I am not so sure. I am also stumpped as to how my battery could say 90% and 2 hours latter the phone is compelty dead. The only things I had done was turn on location services ( I was messing around with an app I downloaded (Zillow) and used the camera for less than 5 minutes and made 2-3 calls. Maybe the case-mate holster charger I had used ealier in the day had given a false full charge, I am not really sure at this point I am still trying to sort out the issue.

Apple changed the pin configuration with the 3G on phones ,ipod and itouch back in 2008
They removed the firewire charge option new kit is now not compatible with older
options that charge
ie 3G or 3Gs for that matter will not charge on original Bose Sound dock or Apple
docks for starters

Hi...i'm still using the old iphone 3G...my phone is no longer charging...when i tried to charge it, what i see on the screen is the usb cord with the arrow pointing the itunes logo...can someone help me?

hi...i'm still using the old iphone 3G...my phone is no longer charging...when i tried to charge it, what i see on the screen is the usb cord with the arrow pointing the itunes logo...can someone help me?

It sounds like your phone is in recovery mode, which means it needs to be restored through iTunes on your computer in order to get out of it.

My Macbook aliminium unibody from late 2008 will not boot. I reach the grey screen with the apple icon and the spinning grey gear. I used disk utility to boot it but it said integrity test failed. I don't know what to do can anyone please help?

My Macbook aliminium unibody from late 2008 will not boot. I reach the grey screen with the apple icon and the spinning grey gear. I used disk utility to boot it but it said integrity test failed. I don't know what to do can anyone please help?

Sounds like you may have a harddrive issue. You are probably going to need to get that changed out and then install the OS X again to get it going.

If I use a sound clip in the multi-track editor multiple times; is there a way to reverse the clip w

If I use a sound clip in the multi-track editor multiple times; is there a way to reverse the clip without change all the instances where the clip was used in the same multi-track session?
I'm having to copy the clip rename it as clipreverses.wav then bring it back into audition to use it.
Sony Vagas you can flip the same clip on a different track with a right click and not affect any other copies of that clip.

Not that I'm aware of, no. You can easily make a unique copy of a clip (right-click on it, and you get it already saved for you), and I'd say that having this was more flexible in one way, at least, as you could then time-stretch it if you wanted to, without altering all other instances of it. Not saying that there wouldn't be any point in having a reverse-play option - I can see instances where it might be useful. It's just that it's not exactly difficult to achieve this anyway, which is probably why I don't ever recall a request for it!

HT5379 What is the Licence situation with the fonts included with OS X Mountain Lion (in particular Silom font)? Can these be used for commercial use?

I'm keen to use Silom in a logo lockup that I'm creating for a national campaign - but can't find any info on purchasing an extended licence anywhere. Is this even possible with OSX system fonts?

Hi,
I have re-read the thread as it has been some time since this was written.
In brief:-
The Sounds only play if another App is "in Front" of Messages (for example Safari is listed in the Menu bar)
Also they have to be set in Messages Menu > Preferences > Alerts and Notifications in System Preferences have to be on as well if you want to see the Banner or Alert type pop ups.
Setting No Sound for an action in Messages also overrides the Sound option in Notifications in System Preferences.
The com.apple.ichat.plist does hold the info on the sounds chosen for the actions.
It also holds the info on Sounds set individually for Buddies via the Buddy Lists.
None of the other ichat.plists, the IMAgent one or the two iMessages ones hold any info on this.
The majority of the Thread above deals with the Notifications sound and the different type of pop ups that alert you to things happening in Messages when it is hidden from view by another app.
Some sounds should still play even if the App is in "front" of others such as the Sound connected with Sending iMessages or Text IMs to Buddies.
Also the sounds for Buddies becoming Available or Going Off Line should still play if set.
You appear to imply you are losing the sound of one event without actually stating which sound and which action.
The Default sound for Messages Sent is s sort of "woowhit" where as the Message Received Sound is a more "woo" only noise.
If things have changed then some ideas about that might be helpful.
8:42 PM Wednesday; May 8, 2013
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Hello, please help, my interface is connected to the microphone and when i open Logic 9 it does´t work. But I opened garageband to check and it works fine. I can record voice with any effect... With Logic i see the sound passes in the interface.

Hello, please help, my interface is connected to the microphone and when i open Logic 9 it does´t work. But I opened garageband to check and it works fine. I can record voice with any effect... With Logic i see the sound passes in the interface but does not arrive in Logic. The Loops works fine and i can hear. Is just the sound to record the voice it does not work. What can i do ??? I used Logic before in the same computer and it worked fine. Thank you so much, I´m a begginer recording myself.

Make sure you go into preferences in Logic and set the audio input to be your interface and the audio output to be either built in output or the interface, if that is hooked up to something else. It sounds like Garageband has the audio interface set as the input but not Logic.
Also make sure you close all other applications except Logic to ensure it is not running in slave mode...

Sound problems with the kt6 delta

Hi all,
I capture a lot of streaming audio from the web. I use cool edit pro to record the audio and then save it as a mp3 file. I have noticed recently that my sound seems to be dropping from time to time. For a while the sound level is great and then drops down very low before coming back up again.
Has anyone had this sort of problem?
Thanks,
David

It does get quite warm on mine.
You'd think with all of the integrated stuff in it the thing should be cooking.
I've seen on a Soyo KT600 Dragon board it had heatsinks galore a tiny guy on the nic chip, and also one on the southbridge along with the mosfets, and a few other places.

Enhancements with the Easy Enhance - Transactions

Hi,
In CRM 2007, I have noticed a separate section of enhancing transactions alone.
IMG->Customer Relationship Management-> Transactions-> Basic Settings-> Enhancements with the Easy Enhancement Workbench
How is this different from adding fields to transaction using TCODE EEWB ? Has anyone used this feature ?
Regards

Hi,
One of the methods for displaying additional data on existing Business Transaction (One Order, Oppurtunity etc.,)is to enhance the component using EEWB and the system takes care of most of the things.
All we need to do is generate the required methods at the Component Work Bench and add the field on to the UI.
Using the path you mentioned,
existing standard components or custom created components be assigned to a component and can be displayed on the UI. For this settings need to be maintained in SPRO.
I believe this can be done only for Business Transactions like One Order etc.,
Just explore the path you mentioned.
Regards,
Masood Imrani S.

Cannot save and keep sound embedded with the project

I am working on a movie with 1 short video downloaded clip and many jpeg stills as a trial for a larger school project. I have put sound into the project and saved the project. I can listen to the sound However when I save on my school server I cannot open the project up on a computer that has PE and has a burner for me to burn a CD. I have rendered the project. When I attempt to open the project PE states it cannot locate the source of the music. I put the sound in the same folder. I can view the movie, and pictures but the project still cannot find the sound. Please help! Thanks.

None of the Premiere versions, or programs, work well on networkds. You will have better luck if you store your Project on an external, with the proper drive letter assignation and the media files, things will be better for you.
I use a 2TB external with the PREL (Project files), all media and these are each assigned the same drive letter in the OS of all of my editing machines. So long as the drive letter does not change (you MUST set it in the OS of each machine), things work perfectly.
You may wish to contact Adobe Tech Support, regarding the school's network, most people have insurmountable difficulties trying to do so.
Good luck, and please report back, as schools often attmept to use Premiere and Elements on any network.
Hunt

Using the sound enhancer with the preset equalizer settings

Similar Messages

Maybe you are looking for