Using the spacebar for starting and stopping a clip does not work

Hi!
The spacebar for starting and stopping the playing of a clip in the viewer of a sequence in the timeline has a live of its own. Without changing any setings, it sometimes works, but mostly not. Is there a seeting, I have not figured out yet? While in a session with Final Cut Express, it does not change its behavior. It starts with a working or not working spacebar. The same applies to the arrows to go back and for a frame, or back and for a clip. If the spacebar does not work, the arrows do not work either.

thanks everybody. But my spacebar and arrow keys still do not work.
As uggested, I deleted the preferences in the library (which is also what is suggested by fcpbook.com/Misc1.html)
I am used working with Final Cut for some time now. And just got myself a new iMac and the program. So everything is quite new. I did not change any settings so far.
The first 2 days everything was fine.
Then, one day, the spacebar and the arrow key stopped working. Not in the middle of a session, but when I started the FCE new. Inbetween, it worked for some time. Now, the spacebar is gone again.
It's just the function of playing the clip that does not work. In whatever window (timeline, viewer). The function of the spacebar to make a space (for example in te name of clip or in a text file) works fine.
I would not mind the spacebar that much, but I miss the arrow keys to go from frame to frame, or from clip. It's strange.

Similar Messages

When I try to open a new tab using the "+" on the toolbar, nothing happens. Even trying to use the cntl t to open a new tab does not work. To open a new tab, I must right click on a hyperlink. how can I correct this? Using Firefox 3.6.18

When I try to open a new tab using the "+" on the toolbar, nothing happens. Even trying to use the cntl t to open a new tab does not work. To open a new tab, I must right click on a hyperlink. how can I correct this? Using Firefox 3.6.18

The Ask Toolbar is causing that in the Firefox 3.6.13+ versions. Uninstall that extension.
There are a couple of places to check for the Ask toolbar:
* Check the Windows Control panel for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
* Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

I am attempting to upload multiple photos on a macpro from a cd. I am used to a pc. I tried using the command button to select multiples but it does not work. Please advise

I am attempting to upload multiple photos on a mac pro from a cd. I have tried holding the "command"button down to select multiple photos but it does not work. Please advise. Thanks,John

why not sort by (name, date, etc) and Click on 1st and Shift-Click on last.
Might work better to copy or import to a project folder.
https://discussions.apple.com/community/ilife/iphoto
http://www.apple.com/support/iphoto

I have tried to add a NEW GMAIL Account into Thunderbird and after i use the automatic configuration finder and Password confirmation, it does not display

I tried to set up a NEW Gmail account in Thunderbird But it will not display eventhough it confirms that the configuration is correct and that the password is Valid. Please NOTE that i previously was able to set up the email account correctly in Thunderbird but was encountering some errors and i therefore deleted it using the Account Actions menu.
I have repeated this action probably probably 5 or 6 times and I still cannot see the new email account in Thunderbird. I can only see my other Gmail Account
Would appreciate someone sharing with me a step by step answer to help me fix this problem as I have no clue

Sounds like the Google Less Secure Application situation. Go to gmail and read what they have to say about this.
FYI: Deleting and reinstalling accounts or Thunderbird software is not the best way to solve problems. It usually never solves a thing and can cause more issues as you are seeing. It is best to troubleshoot what you have and fix those issues.

I updated my phone with the update for applewatch and now my phone is not working properly with hondalink. Can anyone help?

I just updated my phone this morning. It's the new update for the apple watch. I have a 2015 honda fit with honda link. I usually play my spotify through the ''ipod'' source because it shows all of the song information. Since the update it will not play through the i pod source even if it is plugged into the car. Can anyone tell me how to either make the song information show up when I play it through bluetooth or how to make it play through the i pod source again?

Hi mrsmaybe,
I'm sorry to hear you are having issues with your iPhone after a recent update. If you continue to have issues connecting your iPhone to your car's stereo system, either hard wired or via Bluetooth, you may find the troubleshooting steps outlined in the following article helpful:
Get help using your iPhone, iPad, or iPod touch with your car stereo - Apple Support
Regards,
- Brenden

How do I use the commands to start and restart the jmqbroker normally?

How do I use the commands to start and restart the jmqbroker normally?
Because I have tried to use "jmqcmd shutdown bkr" and then tried to type
"jmqbroker" to start up. My screen hangs up and seems that the process
hangs up. The message is
[28/Jun/2002:18:29:07 GMT+08:00] [B1060]: Loading persistent data...
[28/Jun/2002:18:29:08 GMT+08:00] [B1039]: Broker "jmqbroker" ready.
The prompt is hanged until I press CTRL-C.
Then I got the following message:
[28/Jun/2002:18:32:07 GMT+08:00] [B1047]: Shutting down broker...
[28/Jun/2002:18:32:07 GMT+08:00] [B1077]: Broadcast good-bye to all
connections ....
[28/Jun/2002:18:32:07 GMT+08:00] [B1078] Flushing good-bye messages
[28/Jun/2002:18:32:07 GMT+08:00] [B1056] Cleaning up persistent
store...
[28/Jun/2002:18:32:07 GMT+08:00] proceessing 0 messages and cleaning
up 0 files...
[28/Jun/2002:18:32:07 GMT+08:00] [B1063] Done
[28/Jun/2002:18:32:07 GMT+08:00] [B1048]: Shutdown of broker complete.
Then, I use jmqadmin to invoke the console, I can start the broker
again, it gives me
Error encountered while connecting to the broker: "MyBroker":
Broker Host: 'localhost'
Primary Port: '7676'
[C4003]: Error occurred on connection creation, - caught
javax.jms.JMSException
Please verify that there is a broker running on the specified host and
port.
I used ps -def | grep jmq there is no process anymore.
Is it a bug? Would somebody have any idea on what went wrong?

'jmqbroker' is the command to start a broker.
When you type 'jmqbroker' in a command window,
unless you put it in the background, the shell
prompt won't return until the broker is shutdown.
So when you see 'Broker "jmqbroker" ready.', it tells
you that the broker is running and is ready.
When you CTRL-C the process, it has the same effect
as using jmqcmd to shutdown the broker. And so after that,
there's no jmq processes running since you have just
shutdown the broker.
Remember that the jmqcmd/jmqadmin 'restart' command is to
restart an already running broker. jmcmd/jmqadmin does
not support starting a new broker instance.
If you are using csh, end the jmqcmd command with an ampersand ("&")
to have the broker running in the background. An alternative is to
stop the process with Ctrl-Z then input the command "bg" to have that
process resumed in the background.
The problem with not being able to start a broker using the
administration console is a documented limitation of the product that
Yvonne also mentioned. Check the Administrator's Guide for that.

My MacBook Pro, does not start after pushing start button. The side bar starts and stops at half way.

My MacBook Pro, does not start after pushing start button. The side bar starts and stops at half way.

Hy myneck,
Happy Holidays! The resource below may provide some steps to try if your MacBook Pro won't start.
Troubleshooting: My computer won't turn on - Apple Support
http://support.apple.com/en-us/TS1367
This article discusses what to do if your Mac won't turn on. To differentiate this from a display issue, be sure that when you press the power button:
You don't hear a startup chime.
You don't hear any fan or drive noise.
There is no video on your built-in or external display
If your computer has power but doesn't display any video, it may have one or more of these similar symptoms when you press the power button:
You may hear a startup chime.
You may hear fan or drive noise.
You may see a light from the Sleep LED (if your Mac has one).
Pressing the Caps Lock key on the keyboard causes it to light.
If any of these display-related conditions occur, see Troubleshooting: My computer has no video instead. Otherwise, continue with this article.
If your computer won't turn on, try each of these steps:
Verify you have a good connection from your Mac to the wall outlet by confirming the power cord and adapter if present are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device.
If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter.
Note: See Apple Portables: Troubleshooting MagSafe adapters for further troubleshooting with MagSafe adapters.
Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.
MacBook Pro: How to remove or install memory
MacBook: How to remove or install memory
Mac Pro: How to remove or install memory
Mac mini: How to remove or install memory
iMac (27-inch, Late 2012): Installing or replacing memory
iMac: How to remove or install memory
Reset the SMC.
If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
I hope this information helps ....
- Judy

I am getting a service start and stop alert while doing the windows server updates.

HI
I am getting a service start and stop alert while doing the windows server updates. Services are wmiApSrv , WPDBusEnum. Can you please help me to under stand why i am getting the service start and stop alert.
Thanks & Regards
Abhilash K Joy

Hi,
The WMI Performance Adapter (wmiApSrv) service provides performance library information from Windows Management Instrumentation (WMI) providers to clients on the network. This service only runs when Performance Data Helper is activated.
This service is installed by default and its startup type is Manual. When started in the default configuration it will log on using the Local System account.
You can try troubleshooting the issue using Clean Boot to check if the issue is related to third-party software.
How to perform a clean boot in Windows
http://support.microsoft.com/kb/929135/en-us
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Measurement mark for start and stop interval

I have added measurement mark as Start interval and Stop Interval and saving that in the Time interval measure as indicator for BAM in my BPM Process.
This is to calculate the time it takes to finish some task. e.g.
A. process is started
B. Start Interval measurement mark is added and saved in measure BAM indicator
C. some task takes places.
D. Stop Interval measurement mark is added and saved in measure BAM indicator
But, when I create the report, the measure indicator doesn't have any value.
I think I am doing something wrong, but don't know what.
Has any one done this or come across this situation.
Thanks

Dear sir,
My application development steps are as follows:
1. My application consists of three control buttons are Start, Stop & Exit
2. Initially input parameters validation (Limits are assigned)
3. If any value entered out of limit, it will show the error message and the start button will gray and disabled. The user should not start the application until entered values are valied.
4. Internally some conversions and logics are implimented.
5. Coming to Front panel (GUI) start button is green color and stop button is red color.
6. The user entered the correct parameters and he started the appilication. After sometime he should know already application was started and he should not start again until he stops the appilcation.
For this i need logic for start and stop buttons to implement in my application. Thats why i choosen the traffic light concept changing the colors vice versa (which button shows green he should press that perticular button).
Please suggest me or provide any better option for start and stop buttons.
Regards,
S Nagaraju

The download of icloud control panel v2.0 does not work. I have no box to check for calendar and contaks. Whats wrong?

The download of icloud control panel v2.0 does not work. I habe no box to check for calendar and contacts. Whats wrong?
Thanks Chris

Hi, I came across the same problem and was not able to open any iCloud folders on Outlook, and iCloud was continusly asking to repair the iCloud Control Panel. Got the issue fixed by following the steps on the link http://somanytips.com/fix-icloud-error-repair-the-icloud-control-panel-to-use-ic loud-with-outlook/

I uploaded the latest X Yosemite and fond that Aperture did not work. Then I started the new Picture but are not able to upload all my pictures (app half of them) have anybody had the same issue? and can potentially advise me on how to fix it?

I uploaded the latest X Yosemite and fond that Aperture did not work. Then I started the new Picture but are not able to upload all my pictures (app half of them) have anybody had the same issue? and can potentially advise me on how to fix it?

Thanls Ernie. I found the solution. My problem was previous to 10.10.3. It looks like the installation of final cut and uninstallation of fcp delte a plugins that was needed for Aperture. I recover from time machine my plugins in Library/frameworks/plugin.manager.framework and now Aperture works ! Ouf....

HT5557 The ibooks dictionary works fine for my iPhone 5, but it does not work for my iPad 2. Is this fixable?

The iBooks dictionary works fine for my iPhone 5, but it does not work for my iPad 2. Is this fixable?

I went to the Audio store to see about getting a surround sound and the salesperson asked me why I wasn't using AirPlay, he said it was better than the Bluetooth, better quality. So I do have AirPlay on my Sony and I installed the app on my iPhone 5 but they can't find eachother.......when I try looking for my iPhone on my receiver it does not show it. The Sony display works through my TV, the set up screen is there but it says no devices found. Like I said, the Bluetooth finds the iPhone and works ok, but the AirPlay does not.....looking at the manuel it says that the AirPlay will recognize my device (iPhone 5) but it does not..........

My serial number for adobe photoshop elements 12 and premiere elements 12 does not work

My serial number for adobe photoshop elements 12 and premiere elements 12 does not work. On adobe.com it shows that the serial number I received is associated with adobe photoshop elements 9 and premiere elements 9. I have purchased those products in the past, but just recently upgraded to elements 12. I can use the the photoshop organizer, but can't open the photoshop editor.

You need to contact Adobe Support either by chat or via phone when you have serial number and activation issues.
Here is a link to a page with options to help make contact:
http://www.adobe.com/support/download-install/supportinfo/

HT204135 I update my Mac to version 10.9.2 and now my printer does not work anymore. I did all the software updates and I do not understand why my mac does not recognize the printer anymore?

I update my Mac to version 10.9.2 and now my printer does not work anymore. I did all the software updates and I do not understand why my mac does not recognize the printer anymore?

Go to the website of the manufacturer of your printer and check to see if they have released an updated driver for your particular model.

Why does Adobe sendnow work and the newest and greatest Adobe Send does not work?

Why does Adobe sendnow work and the newest and greatest Adobe Send does not work? I wasted about 8 hours on trying to get Adobe Send to upload 269 files that amounted to 469MB. When it did not work I made a zip file and after a lot of wasted run time that did not work. The first situation gives little indication of when a file is loaded compared to Adobe SendNow. In both cases with Send it failed with a message like only the first 50 can be loaded. When I went and looked none of them had been loaded. With the zip file (I wanted to hide the individual files so they would not be counted) it appeared to work but very slowly and finally said it was done and I went and looked and it had done anything for oever 2 hours except a false "I'm runninng" indication.
Thus, I took a chance with Adobe SendNow and it works great. It never gave me a limit on the amount of files nor on the size of the complete job. It shows me one file at a time when it has finished with the file uploading it. SendNow has never given me any problems.
Why woiuld you want to change the program from SendNow to Send without the newest program being the best, fastest, user friendly program of the two? It just doesn't make sense to me. I suggest that Adobe keep SendNow working until Send is fixed. I would also suggest that SendNow and how it looks be kept, called Send, then modify Send one thing at a time until you get it to the point you need it to be for Acrobat. I have heard nothing good and now I have experienced it that Send is a piece of junk. I wasted most of my work day on giving Adobe the benefit of the doubt to find out I made a very bad decision to trust Adobe to make good decisions on the transfer of a function to another place .... both Adobe's responsibility.without making it painless for your customers that totally rely on you. Don't throw away customer confidence as it is very hard to get it back.

Funny how you answer to "troll". (What's your handle on AT&T forums?)
Yep! Verizon living up to it's contractual obligations by not releasing updates. Caveat emptor!
I think there are some reasonable expectations here to keep customer's happy. When one carrier offers upgrades there is an expectation the same will happen across all the carriers. We have seen that except Big Red.
Verizon could have said the update is in MS court months ago and stilled the voice of the disgruntled, or at least redirected it, but instead chose to be silent. Not for market share but for partial blame I think.
We will have to agree to disagree since you only see Terms & Conditions and I, see customer satisfaction.

Using the spacebar for starting and stopping a clip does not work

Similar Messages

Maybe you are looking for