Using the Time Machine backup files without re-storing them to original HD?

Hi,
I have 2 internal HDs that are not my main HD backed up through Time Machine. Ideally I would like to just use the data on the backup HDs but they are all locked. Is it simply a case of changing the Privileges in the 'get info' menue to Anyone can Read and Write?
Thanks!

You can't copy from TM because it is a network of aliases and compressed stuff. You have to work through its interface. You can restore, or you can restore.
If you're looking for a bootable backup that you can drag folders/files from willy-nilly then look at SuperDuper or CarbonCopy Cloner.
-mj

Similar Messages

How can I use the Time Machine Backups from my Old Computer?

I have two months of Time Machine backups made using my old Macintosh computer which died and I no longer have. I have now purchased a new computer and am trying to use the Time Machine back ups from the original computer, but it will not recognise them. How can I get my new MacBook Pro to use the Time Machine Backups from my old Computer? I phoned the Apple help line and they said I cannot use them and would have to delete them. This sounds crazy if you can only use the Time Machine back up file with one computer and have to delete it when you buy a new Mac. Surely there must be some way to transfer ownership (not files) from an old to the new Mac?
Thanks
Richard

Thanks Kevin for the suggestion posted on MacOSXHints how to "Repair Time Machine after logic board changes".
http://www.macosxhints.com/article.php?story=20080128003716101
It seems as though I am not alone with my frustration with the way Time Machine uses the MAC address of a computer to tell one system from another. This means that if you have your Mac repaired with a new logic board, or replace your system with a new one, you can't resume backups where you left off. Reading through the readers who used the fix using Terminal, it appears that the fix does not always work. I contacted Apple again, but they were no help. Surely Apple should come out with a solution as more and more people use Time Machine/Time Capsule.
It is CRAZY that after a change computers or a switch in the computer logic board that you cannot resume your Time Machine back ups.

Tried to restore my mac pro, now it`s not working, can i use the time machine backups?

Tried to restore my mac pro, now it`s not working, can i use the time machine backups?

Yes.

If I set up secure shared disks with accounts, can i still use the time machine backup feature.

I was setting up an account on the time capsule so I can have other people have their own private folder. My question is, Can I still back up my data on my time capsule by using time machine?

Sorry the account feature is irrelevant.. You do not want to use it.. you can migrate your data to your computer.. The account feature is not needed, required, useful or anything to do with restoring your files..
You use account access to stop everybody being able to see your files.. the problem is.. it is not itself secure.. so if i get hold of your TC I can delete your accounts with a soft reset and access all your files.. so it is useless.. don't bother using it.. ignore it.. !!
If you wish to have secure backups use the Time Machine Encrypt backup feature.

Re-installed OS X Server who to re-use clients Time Machine Backups?

Hi all!
For some reason one of my disks in my Mac Mini Server stopped working. So I had to re-install OS X Server.
My client, a MacBook Pro, did its backup towards my Mac Mini Server OS X Server. Now I am curious about if OS X Server is able to re-use that Time Machine backup so that my MacBook Pro client can continue to backup to that Time Machine "file"?
Anyone experienced this?
Regards,
Andreas

If you have not modified your MacBook Pro, you should be able to carry on using the Time Machine backup in your Mac mini Server without any problem. Just set up your MacBook Pro to make backups in your Mac mini Server, and your existing backup should be used without any problem

HT3275 "The external disk must be erased before it can be used for Time Machine backups because it has an incompatible filesystem." What if I don't want to erase the disk?

I'm trying to use Time Machine on my Macbook (which is a year old) to back up onto a 1Tb external hard drive. I have 860 Gb free on the hard drive. But for some reason Time machine presents me with the statement above. How can I back-up my laptop without clearing out the data I already have on the hard drive?

Time Machine must back up to a hard drive that has been formatted in Mac OS Extended (Journaled). Your drive is likely formatted in FAT 32.
If you want to use the drive for Time Machine backups, you will have to erase it and reformat using Disk Utility on your Mac.
First, move the files that you do not want to lose to another temporary location and test to make sure they are OK.
Second, erase the drive that you want to use for Time Machine backups and format it for Mac OS Extended (Journaled).
Third, move the files back to the hard drive. Test to make sure they are OK. When you are sure that the files are safe, you can erase them from their former "temporary" location. (Although I do wonder how you are backing up these files).
Time Machine will not touch the other files that you have on the hard drive.

I have a time machine backup file on a USB hard drive. I bought a time capsule / airport extreme, flat 3TB. I wish to transfer the backup file from the usb hard drive to the time capsule hard drive. 10.6.8

I have a time machine backup file on a USB hard drive. I bought a time capsule / airport extreme, flat 3TB. I wish to transfer the backup file from the usb hard drive to the time capsule hard drive. 10.6.8

Unfortunately, Time Machine backups that are stored on a drive that has been connected directly to a Mac are completely different than Time Machine backups that are stored on a Time Capsule.
Frankly, it is not worth the effort and trouble to try to transfer the old backups to the new Time Capsule.....my opinion....having done this in the past.
It is possible though, but I would not recommend it due to the complexity and downsides involved with this. To give you an idea of how to do this, check out this support article.
http://pondini.org/TM/18.html
Even if you transfer the "old" backups over to the Time Capsule successfully, Time Machine will not simply "add on" to the old backups.
Time Machine will make a new complete backup of your Mac and then add incremental backups from that point.
My advice.....start a new backup on the Time Capsule and move forward. Keep the USB hard drive around for a month, maybe 2 or 3 in case you need to go back to an old backup for some reason. At that time, you will not likely need the old backups at all since you will have a current 2-3 month history of new backups. At that point, you can erase the USB drive and use it for another purpose.

HT201250 How do I find out what portable drive was the drive I used for Time Machine Backup?

Hi, I have 10.7.4 and need to figure out what drive I was using for Time Machine Backup. I have three drives and I have connected each of them to my macbook pro, but I get an error, "Time Machine Error, The backup disk is not available" when I hit the time machine icon on the top of the screen and the "backup delayed" prompt. If I try Back up Now I get message, "Time Machine could not complete the backup. Back up disk is not available." I am trying to figure out what the time machine back up would actually look like as a file on the drives but I don't see a folder/file name Time Machine. If I enter Time Machine I can see in the far right column, in purple, the last back up date (Sept. 12, 2012), but when I hit it nothing happens. In the Time Machine preference box the select disk has, in red and to the right, "Delayed" with an "i" within a circle, and the option indicates, "Next backup: when disk is connected."
I know I have a years worth of backups on one of the three drives, but I can't figure out how the heck to find them or how to determine what was the last drive I used for the backups within Time Machine. Help please.

Hi, I have 10.7.4 and need to figure out what drive I was using for Time Machine Backup. I have three drives and I have connected each of them to my macbook pro, but I get an error, "Time Machine Error, The backup disk is not available" when I hit the time machine icon on the top of the screen and the "backup delayed" prompt. If I try Back up Now I get message, "Time Machine could not complete the backup. Back up disk is not available." I am trying to figure out what the time machine back up would actually look like as a file on the drives but I don't see a folder/file name Time Machine. If I enter Time Machine I can see in the far right column, in purple, the last back up date (Sept. 12, 2012), but when I hit it nothing happens. In the Time Machine preference box the select disk has, in red and to the right, "Delayed" with an "i" within a circle, and the option indicates, "Next backup: when disk is connected."
I know I have a years worth of backups on one of the three drives, but I can't figure out how the heck to find them or how to determine what was the last drive I used for the backups within Time Machine. Help please.

Nas on airport extreme not recognized by time machine. same nas was previously used as time machine backup on different airport extreme. are there any configuration files that i can delete to fix this problem ?

nas on airport extreme not recognized by time machine. same nas was previously used as time machine backup on different airport extreme. are there any configuration files that i can delete to fix this problem ?

Time Machine has been working just fine, but in the last week or two it has given up the ghost. I reset the connections to the drive, and it will basically save a few bytes of data and then hang.
Although Apple originally announced, prior to the release of the first 802.11n AirPort Extreme Base Stations (AEBSn), that it would support Time Machine backups to AirPort Disks, they removed that option before they did finally release the base station for sale.
Since then, Apple has posted (as you have noted) that they DO NOT support Time Machine backups to AirPort Disks. As far as I know, they have not changed from that position and those who do these backups find that they become corrupted over time. Sorry, but it sounds like you just confirmed that for yourself.
1) Has one of the recent updates either on the AE (firmware) or OSX disabled this function?
No. Again, this feature has never been supported by Apple for every generation of AEBSn released.
2) Are there any changes I can make to get this working again?
If your data backups are critical to you, then you will want to use a different solution for your Time Machine backup destination drive strategy. I would suggest that you connect your WD My Book directly to your Mac in the mean time.
Your other options would be to either use a Time Capsule (which interestingly does support TM backups to AirPort Disks) or a non-Apple solution like the Drobo FS or HP MediaSmart server.

HT4848 Is it possible to partition an external hard drive that is already being used for Time Machine backups without it being erased?

I'm want to use my current external hard drive, which I use for Time Machine Backup, as a recovery disk for Mac OS X Mountain Lion 10.8.2. From what I have read, the recovery disk assistant will erase all data on the external drive unless it is partitioned. Can I partition my current backup drive without erasing it, even though it is already being used for Time Machine?

It's very simple to test. Turn off your computer. Have your time machine backup plugged in. Hold option and turn it on, keeping option held. Do you see your time machine drive? If so, select it and press enter. You'll end up in recovery. If it works, there you go. Then just click the apple and restart to get back to your regular desktop. Then you'll know for when you're ready to do the deed.
Edit...
I'm not sure if time machine will think it's an entirely different computer, though, when a hard drive changed, making an actual restore not doable. Either way, you could still reinstall mt lion fresh and then just migrate after, skipping the need for SL.

I just installed a larger hard drive, and used my Time Machine Backup to transfer my info back to the new hard drive. When I open Iphoto, my thumnails are there, but they aren't linked back to the actual photos.I see the photos in my HD. What should I do

I just installed a larger hard drive, and used my Time Machine Backup to transfer my files back to the new hard drive. When I open Iphoto, my thumbnails are there, but they aren't linked back to the actual photos. I see the original photo files in my HD. Is there a way to link the Iphoto thumbnails back to the original files?

Use the Firewire cable and t boot the old Mac's hard drive to the new Mac's desktop and transfer your entire iPhoto folder.
Use Disk Utiliy to erase'format HFS+ Journaled your TimeMachine drive and use the free Carbon Copy Cloner and clone your new boot drive to the external, it's hold option bootable.

Determining the Size of a Time Machine Backup File

When I highlight a Time Machine backup file and then click on Get Info under File to determine the size of the backup file, the disk drive works its heart out, but the Get Info window never arrives at a determination of the file size being seemingly stuck in the "calculating size" state.
Anybody have an idea of what's going on?
JohnnyS

JohnnyS wrote:
Regarding your statement: "If you Enter Time Machine (the "Star Wars" interface), from a Finder window with a "size" column, then browse your backups, you should be able to see the sizes easily." - what do you mean by the "Star Wars" interface?
Ah, you are new to Time Machine. Sorry, that's how you view and restore from your backups. Hold your mouse down on the TM icon in your Menubar and select +*Enter Time Machine,+* or click the TM icon in your Dock, or the +*Time Machine+* app in your Applications folder.
If I look at the pull-down menu under Finder, I do not see Enter Time Machine. Am I looking in the wrong place? Obviously, since I couldn't get by the first step, I never got to a "size" column, and to be honest, I don't know that I have ever seen a Finder window with a "size" column.
You can add one, by selecting View > as List, then View > Show View Options in a Finder window's menubar, and select or de-select whatever columns you want.
I'm a little embarrassed by my lack of knowledge, but if I don't acknowledge my shortcomings, I'll never get the question answered. Thanks for taking your time to try to help me.
Don't be. We all started at zero at one time or another.
I'm not sure just what you were looking for in your first post. The size of all your TM backups is just the amount used on your external disk, unless you have other data in the same partition (which isn't a good idea). Because of the way TM works, you can't really determine the size of an individual backup, and it really wouldn't mean much.
Perhaps if you clarified just what you want to know, we can help answer it.
For more info on Time Machine, you might want to review these:
Time Machine Tutorial
Time Machine 101
How to back up and restore your files
Time Machine Features
Apple - Support - Mac OSX v10.5 Leopard Time Machine
and perhaps browse the Time Machine - Frequently Asked Questions *User Tip* at the top of this forum.
If you have a problem setting-up or using Time Machine, start with the Time Machine - Troubleshooting *User Tip* at the top of this forum. It will show you how to locate the message(s) that describe the problem, then help you fix it.

Can I use my time machine backup to migrate my files to macbook pro retina from my macbook pro 15 inch?

I'm using a macbook pro 15 inch mid 2011 running on mountain lion.
I have a complete backup of my files on time machine. If I get a macbook retina, whats the best way ti migrate?
Can I use my time machine to restore to the new retina mac?
Thanks

I'd just use the Time Machine restore function when setting up your new machine. If you don't have the TB>FW adapter, how do you plan to connect to your external drive with your TM backup? You may have to resort to Migration Assistant - but it would be helpful if you had the TB>Ethernet adapter so that you could hardwire both machines to your router - going wireless is going to take a long, long time. If your external has a USB port, you could use that for a TM restore...
Clinton

How do I password protect the external hard drive used for Time Machine backup

Can anyone help me to put password protection on the external hard drive I use to Time Machine backup my iMac internal hard drive? I use Snow Leopard 10.6

I think that was FileVault 1. Starting with Lion (10.7) Mac OS X uses FileVault 2, which is whole disk encryption.
Based on complaints seen in these forums, I would say FileVault 2's only complaint has been when people forget their password/encryption key (it seems an encrypted disk does prevent anyone without the password from accessing the data, including the real owner). Otherwise it does not seem to be causing any serious issues. Your Mileage may vary and objects are closer than they appear in your side view mirror (standard disclaimer). Of course this is all academic while you are using Snow Leopard (10.6).
There are other whole disk encryption packages available, such as PGP Whole Disk Encryption, HOWEVER, I would not advise it for your Mac OS X boot disk, as it has been known to be a problem when you try to install operating system updates or upgrade to a new version. NOTE: I have not seen PGP Whole Disk Encryption discussed much, ever since FileVault 2 came along.

Time Machine only shows the current copy of the file I am trying to restore. There is none of the time machine backup histories shown. I am running OSX 10.7.5. I see the backup files on my external Time Machine hard drive. Help

Time Machine only shows the current copy of the file I am trying to restore. There is none of the time machine backup histories shown. I am running OSX 10.7.5. I see the backup files on my external Time Machine hard drive in the Backups.backupdb folder.
Time Machine does show the history of my Macintosh HD, but when I try to navigate to the folder I wish to restore the backup history disappears. I've been searching for answers and I have not found one that works for me.

Time Machine only shows the current copy of the file I am trying to restore. There is none of the time machine backup histories shown. I am running OSX 10.7.5. I see the backup files on my external Time Machine hard drive in the Backups.backupdb folder.
Time Machine does show the history of my Macintosh HD, but when I try to navigate to the folder I wish to restore the backup history disappears. I've been searching for answers and I have not found one that works for me.

Using the Time Machine backup files without re-storing them to original HD?

Similar Messages

Maybe you are looking for