Using the TimeCapsule disk without internet

Hi!
We have a wireless setup with the main provider being an Airport Extreme (connected to the router) and and Airport Express (n) that extends the signal. We have however also a 1TB timecapsule directly connected to two different macs. Can we use the Timecapsule disk without being connected to the wireless spot (airport extreme). In some cases the Airport Extreme goes down and doing so it also drags the TC downs with it. We just want to use the TC as a shared disk connected to two/three computers via the ethernet ports on the TC. How can we do this? When we turn of the wireless the TC disk does not show up and the TC goes yellow...Im posting a screenshot (Norwegian). Hope someone understands what we are trying to achieve:
http://bildr.no/view/311772
Many thanks in advance!
Tom - Norway

I think you can just go to the wireless tab and turn it off in wireless mode. It should continue to work fine over ethernet. You won't be able to control it from a wireless computer then unless you have the ethernet tied to one of your other ports.
Here's what I would do. Set up the TC in "bridge" mode. This way, all ports then become ethernet switch ports (no WAN-LAN) function. Turn the wifi off. Then connect an ethernet cable from the Airport Extreme BS to the TC. Then you'll be able to see the TC from any wireless connected computer but if the WiFi network goes down then you'll be OK.

Similar Messages

What is the best way to find a file on the servers disk without using web.xml?

          What is the best way to find a file on the servers disk without using web.xml?
          I want to find a configuration file not contained within the war file I have
          created. Is there a way to pass information into the ServletContext with out
          rebuilding the ear or war files? Tomcat 4.0 can do this in its server configuration
          files. Does BEA have the equivalent?
          Regards,
          Eric


You can specify the path to the file as a system property
          eg
          java -Dconfig.file.location=./mydirecotry/myfile.txt com.test.MyApp
          "Eric White" <[email protected]> wrote in message
          news:[email protected]..
          >
          > What is the best way to find a file on the servers disk without using
          web.xml?
          > I want to find a configuration file not contained within the war file I
          have
          > created. Is there a way to pass information into the ServletContext with
          out
          > rebuilding the ear or war files? Tomcat 4.0 can do this in its server
          configuration
          > files. Does BEA have the equivalent?
          >
          > Regards,
          > Eric

HT1461 Win 7 set up and running OK,but after go back from OSX the wireless net work stuck at identification cause the window working without Internet.Can we fix it or I must use Windows off line all the time? I already contact Microsoft 2 times for activa

Win 7 set up and running OK,but after go back from OSX the wireless net work stuck at identification cause the window working without Internet.Can we fix it or I must use Windows off line all the time?
I already contact Microsoft 2 times for activations.Hope I can fix from Apple instead.

Ok....Got "Problem 2 and 4" solved....still trying to figure out this pop up everytime I click something...it's crazy how fast the pop up blinks...maybe once or 3 blinks then nothing till you close the window, then pop up then disappears...then click something
else and pop up then gone....never seen this before...ive seen it when you tried to get online which turned out to be a virus on a customers cpu I worked on some years ago, I think it has something to do with the deleted files that I spoke of on last
post...I notice it does it on start up as well.....think something is trying to install but not sure. Need to figure out where the appdata or start up folder and see whats in there....maybe it's in there.......so I might wait to see how it acts in the next
couple days for "Problem 1"...but other than that it's running like a champ...so right now I just want to get the pop up windows to stop........thx again for everyone's help on this.
John

How do i use the recovery disks and backup and restore my laptop in a new HDD without losing OS lic?

I am running a HP-DV6 6090ee laptop with windows 7 Home Premium 64bit OS. This problem started from last evening.
I am getting a "Smart Hard disc error" error message before boot and ater booting windows saying that my HDD is having problems and i need to backup and check the hdd.
After checking i found that i have a corrupted hdd and i am going to replace with a new one.
I need to know the following :
> How do i restore my windows license and my antivirus license in the new hdd?
> i dont currently have a OEM HP OS cd. can i use any windows 7 cd??
> at what stage should i use the recovery disk i created from the recovery partition be used? Whats its specific use?
I really appreciate any quick response as my current HDD is running out of life.
Regards
A

See these 2 Links...
Syncing to a New Computer...
https://discussions.apple.com/docs/DOC-3141
Recovering your iTunes library from your iPod or iOS device
https://discussions.apple.com/docs/DOC-3991

I think my hard drive crashed. How can I get data off via firewire before the HD completely goes? I was stuck on the BSoD and now I can't even use the install disk. Utility Disk said HD was okay. Please HELP ME

Safe mode did nothing.
Safe mode with verbose seemed to make it worse.
Before continuously trying new things, I could use the install disk to check the disk utility and clear
the hard drive from there but now the screen won't even load to that.
I really need the data on the hard drive especially if it can't be salvaged.
How can i transfer files?
Am I better off physically taking my HD out or will it damage itself without
leaving the system.
I tried command r
resetting the pram
safe mode
jumping out a window
nothing has helped.
I am stuck on the blue screen of death and it flickers.

No. In order to use FireWire Target Disk Mode you need to use a FireWire equipped Mac. Other than that the only other way I can think of to even attempt to access you files would be to remove your hard drive and install it in a case and connect it to another computer.
Have you run the Apple Hardware Test? http://support.apple.com/kb/HT1509

Is it dangerous to use the iphone 4 without the earpiece grill?

Is it dangerous to use the iphone 4 without the earpiece grill/mesh on it? I heard it serves radiation cover and now I am worried about using it or holding it close to my ear. I had my screen replaced but the grill insert is missing as it was lost when i damaged my original screen.
Thanks

There are 2 issues here.
Some carriers REQUIRE a data plan in order to use an iPhone on their network. This requirement will vary from carrier to carrier. The iPhone is designed to be constantly connected. If you do not manually go in and turn off cellular data (not just 3G) The phone will attempt to connect to the Internet over the cellular data network. If you have your carrier specifically block these requests, you shouldn't be charged for them. If not, it could end up costing you lots of money you didn't expect. The other thing that will happen is things like visual voicemail will not work (if the carrier supports it to begin with) and you will get lots of messages about not being able to connect to cellular data if you're not in range of WiFi you can connect to. MMS messaging also will not work.
The second issue surrounds the statement: "use the iphone 4 with a standard cdma phone plan".
It is NOT possible to purchase an unlocked CDMA iPhone. ALL CDMA iPhones are locked to Verizon.

GT60 - Can I break RAID0 and then use the Recovery disks?

Is it possible to break the RAID0 and then use the recovery disks from MSI Burn Recovery or a Windows Home Premium Disk with the code from the sticker on my laptop, to install back to factory settings without the RAID0? Just want to make sure before I do something drastic. Thank you.

you can always make an system image of your current windows on an external drive and then experiment with it and if anything breaks, just change bios settings to older ones and recover your older system, everything will be intact like nothing ever happened.

Can u use the ipod touch without wifi like the phones do

can u use the ipod touch without wifi like the phones do

That depends on what you mean by "use".
Sure you can use it without wifi. Many apps do not require a connection to the Internet. The iPod app (or Music and Videos apps, I can never remember which the iPod Touch uses nowadays), for example.
However, iPod Touch devices do not include the "cell phone parts" - i.e. they cannot connect to cellular voice or data networks. Therefore, when an iPod Touch cannot connect to a wifi network, it has no way to transceive data with the Internet (short of Bluetooth, but that's a special case and I'm sure not what you're asking about).

Anyone clean their mac using the disk utility using the repair disk permissions??

anyone clean their mac using the disk utility using the repair disk permissions??

No. Threads don't hurt anything. If your computer is not functioning properly perhaps you need to try some basic maintenance. Let's start by having you do this:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Next, try booting into Safe Mode then immediately restart normally. Safe mode is going to take a while so be patient. It's slow.
Next, create a new user account. Log out of your account then log into the new account. Try using iPhoto and the publishing button. Do they work now?
If you still have a problem, then do the following. If you don't want to go through the above then just start with the following and forget the others above.
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

I am using a mac mini 2011 an 3gs i phone 2010 macbook white 2008 and a new 2013 apple tv box. When i check info on the cloud I get 'upgrade your operating system to the latest. My question is is it possible to use the icloud system without an upgrade

I am using a mac mini 2011 an 3gs i phone 2010 macbook white 2008 and a new 2013 apple tv box. When i check info on the cloud I get 'upgrade your operating system to the latest. My question is is it possible to use the icloud system without an upgrade

iCloud requires OS X 10.7.2.

Can I use the install disk on two computers?

I haven't actually installed it on my computer yet, I just allowed whatever was going to install itself to come up. If I have another computer, can I use the install disk to put OSX on there or not? If so, can I still use it in case I need a backup load of my computer?

Only if you get a family pack license newer than the installer disk which came with the computer(s) can you install it on multiple computers. Check your license agreement.
You can't use the disks which came with another computer on a second computer. These articles explain more along those lines:
http://docs.info.apple.com/article.html?artnum=25517
http://docs.info.apple.com/article.html?artnum=25784
As for backup, I recommend looking at these various procedures:
http://www.macmaps.com/backup.html
Disclaimer: Reference to links I make to my Macmaps.com website are a for your information only type reference. I do not get any profit from this page, and it is open to the public.

How can i reformat my harddrive using the recovery disk stored in partition drive?

hi guys! i need help. i need to reformat my harddrive and i will do this for the first time. however, i was not ablt to make the recovery disk since i purchased the tx2 1275dx laptop last july 2009. what i have is a recovery disk stored in a partition harddrive. how can i reformat my cpmputer using the recovery disk in partition harddrive? my OS is windows vista. thank you...

Hi,
Shutdown the notebook. Tap away at f11 as you start to access Recovery Manager which you can then use to reinstall the Operating System.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Satellite L500-19X - Can't use the recovery disk

Well I got this laptop two days ago and used it once after installing fire fox and my mobile broadband drvier's and going back home to boot up and find it was going to happen,
I had tried safe mode (all three) and repair and all I got was a black screen with the cursor up where there should have been a language screen (I used the recovery disk that came along with the laptop) so anyway after finding out I wasnt going to be able to repair it I tried to install but of course that didn't work either so I put my XP 64 bit OS on and worked perfectly fine, then I upgraded (using my own upgrade windows 7) and that works fine no problems, so I tried again with the original windows 7 that came pre-installed on the laptop's hard drive and all went find untill it starts installing driver's or updates (I'm not 100% sure on this but it is at and/or after the face recognition installation,
Then it shuts it's self down and boots back up to automatically restart and asking me if I want to repair due to a bad start-up so I do the repair boots back up and still says I need to repair and finds nothing wrong and carrys on in that circle.
Now I have been told that it could be the register or it is a graphics problem, I myself am getting pretty fed up of having to install/reinstall/format this laptop.
So if there is anyone who know's what is wrong or what to do or even if it needs to be sent back to be fixed that will be very helpful.
I thank anyone in advance.
Happy new year :)

Hi
Well, I think its really hard to say what the reason is. Maybe the recovery disk is scratchy or the files corrupt there.
At the moment I cant imagine that its a hardware problem because other Windows disk working properly.
In your case I would try to install Windows 7 from a Microsoft disk and then see what happens. If it works properly and you can install all drivers & tools you should order a new recovery disk from Toshiba directly.
Bye

Satellite A300-1mz Can I use the recovery disks after a HDD upgrade?

I'm upgrading the hard drive of my *toshiba a300-1mz*, but I'd be sure that I can use the *recovery disks* maked at the first boots for the s.o. (vista)
I expect your support...
thank you very much...

> how can I be sure that the disk is properly recognized before I buy it???
What do you mean exactly? Did you mean the HDD???
The A300 supports and 2.5 SATA HDD and all 2.5 HDD should be recognized properly since the SATA HDD controller hasnt any limitations.
Bye

If I am buying single app adobe premier pro by annual prepaid plan,after the after the end of the year subscription would it be possible to use the program further without updating or I should pay each year?

If I am buying single app adobe premier pro by annual prepaid plan,after the after the end of the year subscription would it be possible to use the program further without updating or I should pay each year?

Thanks
2 бер. 2015 15:50, користувач "Peru Bob" <[email protected]> написав:
If I am buying single app adobe premier pro by annual prepaid
plan,after the after the end of the year subscription would it be possible
to use the program further without updating or I should pay each year?
created by Peru Bob <https://forums.adobe.com/people/Peru+Bob> in *Premiere
Pro* - View the full discussion
<https://forums.adobe.com/message/7243337#7243337>

Using the TimeCapsule disk without internet

Similar Messages

Maybe you are looking for