Using the Transport Controls of O2R96 for Logic Pro MMC
Hi guys! They have done a nice job on Logic Pro 7.1.0 with getting it to talk to the O2R96 every start up. It's a pleasure not to have to go into Control Surface Setup everytime... There are still a few issues that they haven't yet resolved with the Control Surface that used to work amazingly well on Logic 6.4.2...
Firstly, as I am really used to using the Transport Controls on the O2R96 for playback control when mixing a session down. As one's head never needs to leave the "sweet spot" you just edit till happy (never having to continually turn to the HDR, etc)... Well, on the O2R96 (I'm using version 2 of the O2R96s operating system), ever since I upgraded to Logic Pro 7.0.0, but the Transport Controls don't function at all... Not even the Suffle! They did when I was using Logic Pro 6.4.2. Has anyone else complained of this problem yet?
Also, have noticed that when mixing tracks down using the O2R96 as the main Control Surface, that the faders on screen miss out values between -0.5 and +1.2, so that the 0.0 Unity level cannot be drawn manually into the automation just using the Control Surface Faders. This is annoying, as this slight jump can cause a blip in the mix that stands out like a sore thumb and can take hours of editing to get rid of them... Again, have you had reports of anyone else finding this?
If you have any solutions, would be very obliged...
Got the transport controls working at last. Thanks Dave (from www.logicprohelp.com)! Faders still glitchy between -0.5 and +1.2. No unity level...
Tried adjusting "Control Surface" MIDI Bandwidth, and even adjusted "Controller Assignment" parameters by switching 'pan pots' on O2R96 and 'faders' on O2R96 to control 'volume faders' and 'pan contols', respectively, within Logic. Seems that this glitch still occurs while using the O2R96's pan pots to control volume fades within Logic.
Anyone at Apple that can help? Is it an error in the code you guy's have written?
Similar Messages
-
Why is the transportation C02e 4x higher for Macbook pro 15" compared to iMac 27".
Why is the transportation C02e 4x higher for Macbook pro 15" compared to iMac 27".
Both are great machines but have rather different purposes...while the graphics are good on the MBP, the iMac graphics would be a major step up. Especially if you want to do heavy duty photo or video work, and heavy game use. If the MBP is getting hot and running the fans hard, that would point you to the iMac with its higher end graphics capability.
The photo and video work would be much easier with the larger screen and higier end graphics and faster cpu. -
Which is the optimal hard drive configuration for Logic Pro ?
hello people
i would like to ask your advices about possible hard drive configurations for Logic Pro
I have a Mac Pro and thinking to buy 4 x 500GB drives .
there are several combinations in my mind to configure , but first of all i would like to ask which is the best for an optimal system for Logic Pro
model 1 :
1 stripe Raid 0 array drive for ''System'' (500+500 = 1000)
1 stripe Raid 0 array drive for ''recording + sound banks'' (500 + 500 = 1000)
which means to using 4 hard drives as 2 drives
model 2 :
1 stripe Raid 0 array drive for ''System'' (500+500 = 1000)
1 Single drive for Sound banks (500)
1 Single drive for Recording (500)
which means to using 4 hard drives as 3 drives
Or , it is more healthy to use the drives as single , without raid , stripe sets but with its own capacity instead of combining .
and also if someone has an idea regarding to compare of Seagate and Westerndigital drives (which is the best for audio recording) , would be really helpfull
I am kinda rookie for these subjects :/
thanks in advanceheelo blayzay
thanks for the reply and assistance.
1) how can i create a back up set for the 4th HD to be make back up of the 2nd and 3rd HD
2) what about to make 1st HD for system and 2nd3rd4th (1.5TB) for audio recording, and an external drive for backups ?
For the back ups , is there a special process for the backing up HD (internal or external) ? Or should i just need a Clone software to make the back up
thank you again. -
Switches window when I use the transport control
Hello
I have downloaded Audition CS5.5 trial version. When I'm in Mixer Mode and press the transport buttons in the transport panel (exept play, stop and pause) it switch the window to the Editor mode. Can anyone help? Macbook Pro 17 "- 2.5 GHz IntelCore Duo 4GB RAM, OSX 10.6.8
BjornI have just checked and it is the same on a PC. There is some confusion because AA CS5.5 now calls the tabs heading the Multitrack view Editor and Mixer, whereas previously Audition called the new Waveform view the Edit view.
So, yes, clicking on any of the Transport Fast Forward, Rewind, Move to Next or Previous does switch automatically to the main Multitrack view because it assumes that if you do anything but Play, Pause or Stop then you need to see the waveform to be able to identify where you are going in the audio file. But I can see that it might be useful to be able to move between markers whilst staying in the Mixer view. However if you have the Markers window open you can double click in there on your markers to move between them without leaving the Mixer view. -
Yamaha Motif Rack XS Environment For Logic Pro
Hello Friends,
anyone know where I could download the Motif Rack XS Environment for Logic Pro
Thanks
Best RegardsWould love to have this too...
-
What is the best practice for using the Calendar control with the Dispatcher?
It seems as if the Dispatcher is restricting access to the Query Builder (/bin/querybuilder.json) as a best practice regarding security. However, the Calendar relies on this endpoint to build the events for the calendar. On Author / Publish this works fine but once we place the Dispatcher in front, the Calendar no longer works. We've noticed the same behavior on the Geometrixx site.
What is the best practice for using the Calendar control with Dispatcher?
Thanks in advance.
ScottNot sure what exactly you are asking but Muse handles the different orientations nicely without having to do anything.
Example: http://www.cariboowoodshop.com/wood-shop.html -
When I swipe up from the bottom of the screen to use control center I am not able to use the music controls for music or podcasts and music controls do not work on the lock screen either is anybody else having this problem???????
Not really sur easy you would be having that problem. Mine works. You might try RESET DEVICE
Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost). Then try again and see if it makes a difference -
How to use the custom control ?
Hi Friends,
plz help to use of custom control in screen painter ?
and how to use the custom control ?
Thanking you.
Regards,
Subash.HI,
Screen Elements
A screen can contain a wide variety of elements, either for displaying field contents, or for allowing the user to interact with the program (for example, filling out input fields or choosing pushbutton functions). You use the Screen Painter to arrange elements on the screen.
You can use the following elements:
· Text fields
Display elements, which cannot be changed either by the user or by the ABAP program.
· Input/output fields and templates
Used to display data from the ABAP program or for entering data on the screen. Linked to screen fields.
· Dropdown list boxes
Special input/output fields that allow users to choose one entry from a fixed list of possible entries.
· Checkbox elements
Special input/output fields that the user can either select (value X) or deselect (value SPACE). Checkbox elements can be linked with function codes.
· Radio button elements
Special input/output fields that are combined into groups. Within a radio button group, only a single button can be selected at any one time. When the user selects one button, all of the others are automatically deselected. Radio button elements can be linked with function codes.
· Pushbuttons
Elements on the screen that trigger the PAI event of the screen flow logic when chosen by the user. There is a function code attached to each pushbutton, which is passed to the ABAP program when it is chosen.
· Frame
Pure display elements that group together elements on the screen, such as radio button groups.
· Subscreens
Area on the screen in which you can place another screen.
· Table controls
Tabular input/output fields.
· Tabstrip controls
Areas on the screen in which you can switch between various pages.
· Custom Controls
Areas on the screen in which you can display controls. Controls are software components of the presentation server.
· Status icons
Display elements, indicating the status of the application program.
· OK field
Every screen has a twenty-character OK_CODE field (also known as the function code field) that is not displayed directly on the screen. User actions that trigger the PAI event also place the corresponding function code into this field, from where it is passed to the ABAP program. You can also use the command field in the standard toolbar to enter the OK field. To be able to use the OK field, you need to assign a name to it.
All screen elements have a set of attributes, some of which are set automatically, others of which have to be specified in the Screen Painter. They determine things such as the layout of the screen elements on the screen. You can set the attributes of screen elements in the Screen Painter - either for a single element, or using the element list, which lists all of the elements belonging to the current screen. Some of the attributes that you set statically in the Screen Painter can be overwritten dynamically in the ABAP program.
with regards,
sowjanyagosala -
I can't get the iCloud Contacts and Calendar folders to appear in Outlook 2010 using the iCloud Control Panel. Also the datafile share which ends in .aplzod is not created in Outlook. The Contacts and Calendar are sent to iCloud (verified on iCloud.com) but the iCloud folders are not created in Outlook in the Contacts and Calendar navigation panes. I get a message toward the end of the sync process indicating that there was an unspecified error. I'm using the newest version of the iCloud Control Panel, the 32 bit version of Outlook 2010, Windows 7 64 bit, an iPhone 3GS, and the latest version of iTunes. Any ideas how to complete the sync process to the end?
Pretty much the same for me: Windows 7 64-bit, Outlook 2010, iCloud Control Panel 1.0.1, iPhone 3GS. Error report at end of setup process is shown below, and has been emailed. Any help please?
Your setup couldn't be started because of an unexpected error.
Error: 0x8004010F: ZebraBootstrap::ActivateDataFile: Could not create msgservice
AppleOutlookDAVConfig version: 3.0.42.0
Windows version (6.1.7601): Windows 7 Home Premium Edition Service Pack 1 (build 7601), 64-bit Local app data directory test: Pass Temp directory test: Pass Outlook version: 14 (14.0.6025.1000), x86 Outlook location (installed): C:\Program Files (x86)\Microsoft Office\Office14\OUTLOOK.EXE MAPI location: C:\Program Files (x86)\Common Files\SYSTEM\MSMAPI\1033\MSMAPI32.DLL
MAPI logon succeeded
Message Stores Table:
Outlook Data File, 4E495441F9BFB80100AA0037D96E0000
Outlook Data File, 4E495441F9BFB80100AA0037D96E0000
Outlook Data File, 4E495441F9BFB80100AA0037D96E0000
Contents of C:\Program Files (x86)\Common Files\SYSTEM\MSMAPI\1033\mapisvc.inf
<Not found>
Contents of C:\Windows\system32\mapisvc.inf
[Services]
MSFAX XP=Fax Mail Transport
[Default Services]
MSFAX XP=Fax Mail Transport
[MSFAX XPP]
PR_PROVIDER_DLL_NAME=FXSXP.DLL
PR_RESOURCE_TYPE=MAPI_TRANSPORT_PROVIDER
PR_RESOURCE_FLAGS=STATUS_NO_DEFAULT_STORE
PR_DISPLAY_NAME=Fax Mail Transport
PR_PROVIDER_DISPLAY=Fax Mail Transport
[MSFAX XP]
PR_DISPLAY_NAME=Fax Mail Transport
Providers=MSFAX XPP
PR_SERVICE_DLL_NAME=FXSXP.DLL
PR_SERVICE_SUPPORT_FILES=FXSXP.DLL
PR_SERVICE_ENTRY_NAME=ServiceEntry
PR_RESOURCE_FLAGS=SERVICE_SINGLE_COPY|SERVICE_NO_PRIMARY_IDENTITY
HKLM\Software\Microsoft\Office\14.0\Access\Access Connectivity Engine\ISAM Formats\Outlook 9.0 HKLM\Software\Microsoft\Office\14.0\Access Connectivity Engine\ISAM Formats\Outlook 9.0 HKLM\Software\Microsoft\Office\14.0\OneNote\Outlook Add-in
Message Classes
HKLM\Software\Microsoft\Office\14.0\Outlook
Dataviz
InstallRoot
Namespaces
{0006F017-0000-0000-C000-000000000046}
FolderTypes
{00067800-0000-0000-C000-000000000046}
{00067801-0000-0000-C000-000000000046}
{00067802-0000-0000-C000-000000000046}
{00067803-0000-0000-C000-000000000046}
{00067804-0000-0000-C000-000000000046}
{00067808-0000-0000-C000-000000000046}
{00067828-0000-0000-C000-000000000046}
{00067829-0000-0000-C000-000000000046}
{0006782A-0000-0000-C000-000000000046}
ViewTypes
{00062000-0000-0000-C000-000000000046}
{00062001-0000-0000-C000-000000000046}
{00062002-0000-0000-C000-000000000046}
{00062003-0000-0000-C000-000000000046}
{00062004-0000-0000-C000-000000000046}
{0006F018-0000-0000-C000-000000000046}
FolderTypes
{00067820-0000-0000-C000-000000000046}
{00067821-0000-0000-C000-000000000046}
{00067822-0000-0000-C000-000000000046}
{00067823-0000-0000-C000-000000000046}
ViewTypes
{00062000-0000-0000-C000-000000000046}
{00062001-0000-0000-C000-000000000046}
{00062002-0000-0000-C000-000000000046}
{00062003-0000-0000-C000-000000000046}
{00062004-0000-0000-C000-000000000046}
Operations
1ImportFile
2ExportFile
3ExportDataLink
4ImportVCard
5ImportAccounts
6ImportVcalendar
7ImportRss
8ExportRss
9ImportCFL
ImportEudora
SchedulingInformation
FreeBusySupport
SearchTypes
{00067A00-0000-0000-C000-000000000046}
{00067A01-0000-0000-C000-000000000046}
{00067A02-0000-0000-C000-000000000046}
{00067A03-0000-0000-C000-000000000046}
{00067A04-0000-0000-C000-000000000046}
{00067A08-0000-0000-C000-000000000046}
{00067A10-0000-0000-C000-000000000046}
{00067A11-0000-0000-C000-000000000046}
{00067A20-0000-0000-C000-000000000046}
Setup
UpgradePath
HKLM\Software\Microsoft\Office\14.0\User Settings\Access_Core\Create\Software\Microsoft\Office\Outlook
Addins
AccessAddin.DC
HKLM\Software\Microsoft\Office\14.0\User Settings\Access_Core\Create\Software\Microsoft\Shared Tools\Outlook
Journaling
Microsoft Access
HKLM\Software\Microsoft\Office\14.0\User Settings\Excel_Core\Create\Software\Microsoft\Shared Tools\Outlook
Journaling
Microsoft Excel
HKLM\Software\Microsoft\Office\14.0\User Settings\Misc_SpsOutlookAddin\Create\Software\Microsoft\Office\Outlook
Addins
ColleagueImport.ColleagueImportAddin
HKLM\Software\Microsoft\Office\14.0\User Settings\Outlook_AutoDiscover
Create
Software
Microsoft
Office
14.0
Outlook
AutoDiscover
HKLM\Software\Microsoft\Office\14.0\User Settings\Outlook_Core
Create
Software
Microsoft
Internet Mail and News
Mail
MSDAIPP
Shared Tools
Outlook
Journaling
Conversation
Document
E-mail Message
Fax
Letter
Meeting
Meeting Cancellation
Meeting Request
Meeting Response
Note
Phone Call
Remote Session
Task
Task Request
Task Response
Web Service Providers
FreeBusy
office.microsoft.com
Windows
CurrentVersion
Internet Settings
TemplatePolicies
High
Zones
4
HKLM\Software\Microsoft\Office\14.0\User Settings\Outlook_Intl HKLM\Software\Microsoft\Office\14.0\User Settings\Outlook_SearshShellReg
Create
Software
Microsoft
Windows
Shell
Associations
UrlAssociations
mapi
UserChoice
HKLM\Software\Microsoft\Office\14.0\User Settings\Outlook_SocialConnector HKLM\Software\Microsoft\Office\14.0\User Settings\Outlook_SocialProviderMOSS
HKLM\Software\Microsoft\Office\14.0\User Settings\PowerPoint_Core\Create\Software\Microsoft\Shared Tools\Outlook
Journaling
Microsoft PowerPoint
HKLM\Software\Microsoft\Office\14.0\User Settings\Word_Core\Create\Software\Microsoft\Shared Tools\Outlook
Journaling
Microsoft Word
HKLM\Software\Microsoft\Office\8.0\Outlook
HKLM\Software\Microsoft\Office\Delivery\SourceEngine\Downloads\{90140000-001A-04 09-0000-0000000FF1CE}-C\Resources\OutlookMUI.msi
HKLM\Software\Microsoft\Office\Delivery\SourceEngine\Downloads\{90140000-001A-04 09-0000-0000000FF1CE}-C\Resources\OutlookMUI.xml
HKLM\Software\Microsoft\Office\Outlook
Addins
Apple.DAV.Addin
BCSAddin.Connect
Groove.OutlookProxyAddIn
Microsoft.VbaAddinForOutlook.1
OneNote.OutlookAddin
OscAddin.Connect
OutlookChangeNotifier.Connect
Search.OutlookToolbar
UmOutlookAddin.FormRegionAddin
AutoConfigDomains
hotmail.*
live.be
LIVE.CA
LIVE.CL
LIVE.CN
LIVE.CO.IN
LIVE.CO.KR
LIVE.CO.UK
LIVE.CO.ZA
LIVE.COM
LIVE.COM.AR
LIVE.COM.AU
LIVE.COM.MX
LIVE.COM.MY
LIVE.COM.PE
LIVE.COM.PK
LIVE.COM.PT
LIVE.COM.SG
LIVE.COM.VE
LIVE.DE
LIVE.DK
LIVE.FR
LIVE.HK
LIVE.IE
live.in
LIVE.IT
LIVE.JP
LIVE.MA
LIVE.NL
LIVE.NO
LIVE.PH
LIVE.RU
LIVE.SE
livemail.com.br
msn.*
msnhotmail.com
tw.live.com
windowslive.com
FormRegions
IPM.Note.Microsoft.Exchange.Fax.UM.CA
IPM.Note.Microsoft.Exchange.Voice
IPM.Note.Microsoft.Exchange.Voice.UM
IPM.Note.Microsoft.Exchange.Voice.UM.CA
IPM.Note.Microsoft.Fax.CA
IPM.Note.Microsoft.Voicemail
IPM.Note.Microsoft.Voicemail.UM
IPM.Note.Microsoft.Voicemail.UM.CA
IPM.Note.Rpmsg.Microsoft.Voicemail.UM
IPM.Note.Rpmsg.Microsoft.Voicemail.UM.CA
Outlook 10 Accounts
Categories
{ED475418-B0D6-11D2-8C3B-00104B2A6676}
{ED475419-B0D6-11D2-8C3B-00104B2A6676}
{ED475420-B0D6-11D2-8C3B-00104B2A6676}
Types
{4DB5CBF0-3B77-4852-BC8E-BB81908861F3}
{ED475411-B0D6-11D2-8C3B-00104B2A6676}
{ED475412-B0D6-11D2-8C3B-00104B2A6676}
{ED475414-B0D6-11D2-8C3B-00104B2A6676}
SocialConnector
SocialProviders
OscAddin.SharePointProvider
HKCU\Software\Microsoft\Office\14.0\Common\HelpViewer\Applications\OUTLOOK
AdditionalCollections
0
1033
HKCU\Software\Microsoft\Office\14.0\Common\Migration\Outlook
HKCU\Software\Microsoft\Office\14.0\Outlook
Addins
AutoDiscover
RedirectServers
Display Types
Balloons
Journal
Message
Office Explorer
Options
Calendar
MSHTML
International
ToDoBar
Perf
RoamingStreamsCache
6BF937902986EF42A5D2882B309351BF
Preferences
Resiliency
DisabledItems
Search
Catalog
Setup
SQM
Today
Folders
UserInfo
HKCU\Software\Microsoft\Office\14.0\User Settings\Outlook_AutoDiscover HKCU\Software\Microsoft\Office\14.0\User Settings\Outlook_Core HKCU\Software\Microsoft\Office\14.0\User Settings\Outlook_Intl HKCU\Software\Microsoft\Office\14.0\User Settings\Outlook_SearshShellReg HKCU\Software\Microsoft\Office\14.0\User Settings\Outlook_SocialConnector HKCU\Software\Microsoft\Office\14.0\User Settings\Outlook_SocialProviderMOSS
HKCU\Software\Microsoft\Office\8.0\Outlook
HKCU\Software\Microsoft\Office\Outlook
Addins
AccessAddin.DC
ColleagueImport.ColleagueImportAddin
iTunesAddIn.CalendarHelper
OMI Account Manager
SocialConnector -
Hi There
Any ideas- what is the best control surface to use with Logic Pro?I would like a controller with at least 16 or 24 individaul faders.
Does the Mackie X Bus emulate a controller for Logic Pro?
thank you
G4 1.25 gig Mac OS X (10.3.8) G4,I'm using a Mackie Control Universal and absolutely love it. The integration with Logic is top-notch. It would be nice to add an Extender and have 16 faders, but I'm finding that for what I do 8 faders at a time is plenty.
The X Bus has a Mackie Control layer that gives you the same amount of control. I believe the MCU's buttons are all displayed up on the X Bus screens. I'm sure you can find out more in the owners manual: http://www.mackie.com/products/digitalxbus/pdfs/X200OM_Ver1_04.pdf
Good luck! -
can i install logic pro without cd ? , i have the key for the logic pro but my dvd driver of my mac doesnt work ?
Buy an external USB2 DVD/CD drive..... (Amazon's Basic model works great)
Or..
Borrow someone else's Mac that has a DVD drive fitted and use that via Remote Disk
Note:
There is no legal means of downloading available for Logic Pro 9.. unless you originally purchased it via the App Store..
Therefore, in your case, you must install from the DVDs you have... -
1. HP Pavilion dm4 XO132AV
2. Windows 7 64-bit
3. No error message
4. No changes were made prior to when the issue occured
5. Question: I am no longer able to use the volume control buttons ( /-/or mute) on my key board in Windows 7Hi,
Try the following.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp50501-51000/sp50856.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, restart the notebook and let Windows fully load. Open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, restart the notebook again.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
When using the new controls of CVI 7 in my DLL it crash on the DisplayPanel call
I have a CVI DLL that was build under CVI 6. When I recompile it in CVI 7 everything works fine when I load the DLL from my application. But If I add a button on my uir file with the new CVI 7 style (no event code associated, just a plain button) my DLL crash and hang my main application on the DisplayPanel call. If I don't use the new controls (use the classic-style controls) everything works fine. I use LoadPanelEx to load my uir file. The returned panel handle is good (> 0) But when I call DisplayPanel it doesn't show me any error but just crash my DLL and jump back in the DLLMain function saying that my process is detaching and hang my main application.
I am running on Win2k. I have
LabVIEW 7 and LabVIEW 6.0.2 installed also. The main application that calls the DLL is made in Delphi 6.
I have re-installed the run-time engine from the CDs but this didn't do the trick. Is there something else that I must include with my DLL to use thoses new controls styles. The DLL is running from the same place where it was build.Hi,
I have created another cvi DLL and it create the same behavior in my application (crash on DisplayPanel). But if I do a standalone CVI executable with thoses new buttons everything is fine. Also I have created another application(in Delphi) to load the cvi-dll and it works fine in that one. So I would tend to say that it is in my application but on the other hand everything works fine if I don't put thoses LabStyle controls...Weird I know...
In shorts It is just crashing with a specific application but for any UI project that I create. If I don't put thoses buttons everything is ok...Any other advises would be helpful because I'm kind of out of ideas...
Gilles Hache -
In Report Builder 3.0, I have the following custom code entered:
Public Function SafeDivide(Numerator as String, Denominator as String) as String
Try
If Numerator = “” or Denominator = “” then
Return “-“
End if
If Numerator = “-“ or Denominator = “-“ then
Return “-“
End If
If CDbl(Numerator) =0 or CDbl(Denominator) = 0 then
Return “-“
End if
If IsNothing(Numerator) or IsNothing(Denominator) then
Return "-"
End if
Return Val( ( (CDbl(Numerator) / CDbl(Denominator) )*100 ) )
Catch
Return "-"
End Try
End Function
I call the custom code in the cell with the following equation:
=Code.SafeDivide(sum(Fields!TY_UNITS.Value)-sum(Fields!LY_UNITS.Value),sum(Fields!LY_UNITS.Value))
I have the format for the cell set to 0.00%, but it’s not being followed.
I want the result to be formatted as a Percentage, but instead I get values like:
-78.9473684210
80
300
-100
I have the format for the cell set to 0.00%, but it’s not being followed.
How do I do use the custom code and format for a percentage with 2 decimals?Hi AngP,
After testing the issue in my local environment, I can reproduce it. Based on my research, I find this issue is caused by the type of Units_VAR_Percentage cell is string, while the type of CDbl(Parameters!Var_Threshold.Value) is double, so they cannot be
compared.
To fix this issue, we can add a hidden column (Textbox91) next to the Units_VAR_Percentage column, and type =(sum(Fields!TY_UNITS.Value)-sum(Fields!LY_UNITS.Value)) /sum(Fields!LY_UNITS.Value) as the expression. Then use the expression below to control the
BackgroundColor:
=iif(iif(reportitems!Units_VAR_Percentage.Value=CStr(format(reportitems!Textbox91.Value,"0.00%")),reportitems!Textbox91.Value,0)>CDbl(Parameters!Var_Threshold.Value),"Yellow","PaleTurquoise")
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
How do u turn down the tick volume when using the remote control?
how do u stop the ticking(clicking) when adjusting the volume using the remote control?
Hi philippalldino,
I understand that you do not wish to hear your volume feedback when adjusting the volume of your computer. Here is an article that will tell you how to disable this feature:
OS X Mountain Lion: Turn off the alert sound for volume keys
http://support.apple.com/kb/PH10762
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden
Maybe you are looking for
-
How do I install web apps to my iphone?
I read on the apple web app support page that you can now download more apps into your home page. However, the vague instructions either do not work or the instructions were posted prematurely and I have something else to do first. I a, told, in a nu
-
Permissions Issues Across Network
Hi all, I am running into permissions errors when accessing files over a network. Our network is simple, consists of two external USB drives and a linksys network appliance that they both plug into. I am trying to synch the two drives and can mount t
-
Dear Gurus, I am aware of basic EBS configuration.Now I have to configure for EBS in MT940 format with BAI codes. Now I donot know whay in the Ext transaction for this that is when there is BAI code attached in MT940 format..Pls find sample code I to
-
Why does the loading icon never go away?
I went to an adult site by accidnet and a pop up appeared. It was blacked out and I exited. Then when I went to facebook the loading icon just kept on spinning. It doesn't stop and it keeps coming back. I went to general settings and deleted my cache
-
Itunes password on every app store access.
Hi all, Every time I access app store on the iphone, I have to type my itunes password. Some time ago, I did'nt even have to type it once. Does anybody know how it can be adjusted so I don't have to type it anymore? thx