Using Thesaurus to search synonyms?

Today I was searching for a document whose name, date, etc. we couldn't exactly remember. All we knew was that it had "new," or something like it, in the filename. Spotlight didn't turn it up. So I went to the system Thesaurus and searched for each entry there. Turned out it was "recent."
So I was wondering if anyone knew of a way to submit the results of Thesaurus lookups to Automator workflows. I can think of other instances where that ability might be useful... probably you can, too.
Matt.

Hi James,
> You are speaking of creating an example-based (trex) query?
I was thinking of creating search iViews, that's not "example based", but a concrete search for files under some folder with a specific property set to a specific value.
> How does TREX find this category within xmlForms
> and serve it up to the specific role?
As said, if you map an XMLForms property to the predefined property, you are just searching over predefined properties, nothing special any more.
Hope it helps
Detlev
PS: As said, I haven't totally understood your question, what's your scenario in detail... Maybe if there are open questions, you should try to clarify this a bit more.

Similar Messages

How can I use ONE Text search iView to event/affect mutliple Result Sets?

hello everyone,
i have a special situation in which i have 6 flat tables in my repository which all have a common field called Location ID (which is a lookup flat to the Locations table).
i am trying to build a page with a free-form text search iView on Table #1 (search field = Location ID). when I execute the search, the result set for Table #1 is properly updated, but how do I also get Result Set iViews for Tables #2-6 to also react to the event from Text Search for Table #1 so that they are updated?
i don't want to have to build 6 different text search iViews (one for each table). i just want to use ONE text search iView for all the different result set tables. but, in the documentation and iView properties, the text search iView doesn't have any eventing.
if you have any suggestions, please help.
many thanks in advance,
mm

hello Donna,
that should not be a problem, since you are detailw with result sets and detail iviews because custom eventing can be defined for those iviews.
Yes, it says "no records" found because an active search and record selection havent' been performed for it (only your main table does).
So, yes, define a custom event, and pass the appropriate parameters and you should be fine.
Creating a custom event between a Result Set iView and an Item Details iView is easy and works. I have done it.
See page 35 of the Portal Content Development Guide for a step-by-step example, which is what I used.
For my particular situation, the problem I'm having is that I want the Search Text iView's event (i.e., when the Submit button is pressed) to be published to multiple iViews, all with different tables. Those tables all share some common fields, which is what the Search iView has, so I'd like to pass the search critera to all of the iViews.
-mm

HT6114 Can't save downloads to existing files?? In the "save as" box I use the little "search" window to locate where I want to put a new file but when found the location file does not operate. And dropdown menu says "save to online acct"

When I try to save an emailed-to-me document to an existing file on my hard drive by using the little "search" window the recipient file is inactive and does not open to recieve the document I want to save (nothing happens when I click on it and it's a subdued color).
If I click through my files manually by starting on the desktop and working my way to the location of the recipient file I can save.
This takes a lot of time and is DRIVING ME CRAZY!
Please tell me I've just missed something obvious that can be fixed in a jiffy!?

OMG!! It also happens when I try to open a file from inside a program like Adobe Reader. If I use the little corner search window all the files are inoperable.

How to use ADF Query search with EJB 3.0

Hi,
In ADF guide http://download.oracle.com/docs/cd/E12839_01/web.1111/b31974/web_search_bc.htm#CIHIJABA
The steps to create query search with ADF Business Components says:
"+From the Data Controls panel, select the data collection and expand the Named Criteria node to display a list of named view criteria.+"
But with EJB, I'm not able to find Named Criteria node. Can we use ADF query search component with EJB? If yes, can you please show me some example, tutorial etc.?
Thanks
BJ

For EJBs you'll need to implement the query model on your own.
An example of how the model should look like is in the ADF Faces components demo.
http://jdevadf.oracle.com/adf-richclient-demo/faces/components/query.jspx
Code here:
http://www.oracle.com/technology/products/adf/adffaces/11/doc/demo/adf_faces_rc_demo.html

Is there any way to search for a term using the Firefox search field, and have the results automatically open in a new tab?

Is there any way to search for a term using the Firefox search field, and have the results automatically open in a new tab? When there was support for Google Toolbar, I was able to do this; now, whenever I want to search for something, I have to open a new tab to do it, and cut-and-paste my search into the search field in the new tab. I used to be able to highlight, drag, and drop something into the search field and have it automatically open in a new tab. This is enough for me to switch to Chrome . . .

Set a preference to have searches from the Search Bar (upper right) automatically open all searches in a new tab
#type '''about:config''' in the URL/Location/Address bar and press the Enter key
#if you see a warning, accept it (promise to be careful)
#Filter = '''browser.search.openintab'''
#in the lower panel, double click the item (or right-click and choose "Toggle") to change the value to "true"
#close the about:config tab and test
#See:
#*For help with opening/using about:config, also see: http://kb.mozillazine.org/About:config
#*Also see: http://kb.mozillazine.org/About:config_entries (click on "Browser", scroll down to browser.search.openintab)
'''Search Bar''': http://support.mozilla.com/en-US/kb/Search+bar
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
About Google toolbar............
Google decided that they will no longer produce the Google Toolbar for Firefox 5 and newer version. It is best to move on to other alternatives than to try any "hacks" to the toolbar that may or may not perform in the future. Future versions of Google toolbar will only work with IE7-9. Google Toolbar is not available on any other browser, even Google's own browser.
*http://googletoolbarhelp.blogspot.com/2011/07/update-on-google-toolbar-for-firefox.html
*https://support.mozilla.com/en-US/kb/google-toolbar-not-compatible-firefox?s=google+toolbar&r=0&as=s
*http://www.google.com/support/toolbar/bin/answer.py?answer=1342452&topic=15356%29
*Google Toolbar 8 FAQ (IE only): https://www.google.com/support/toolbar/bin/answer.py?hl=en&answer=1111588
'''''To access your Google Bookmarks visit''''' www.google.com/bookmarks.
Alternatives:
*http://kb.mozillazine.org/Using_Google_Toolbar_features_without_toolbars
*https://addons.mozilla.org/en-US/firefox/addon/googlebar-lite/
*https://addons.mozilla.org/en-US/firefox/addon/gbookmarks-google-bookmarks-fo/

Windows 8.1 PC, using reader, when searching a folder containing approx 100 doc's. If i search for a word, no results are returned. only the doc names can be found but nothing from within the doc. This is a new problem and was not the case before.

Windows 8.1 PC, using reader, when searching a folder containing approx 100 doc's. If i search for a word, no results are returned. only the doc names can be found but nothing from within the doc.
This is a new problem and was not the case before.

Works perfectly fine for me with the latest Reader version (11.0.09).
You write that it worked "before"; before what? An update? Update from what version to what version?

Sometimes when using the Google search engine, after using the Back button in the Firefox 4.0.1 browser, I am no longer able to click in the Google search box.

Sometimes when using the Google search engine, after using the Back button in the Firefox 4.0.1 browser, I am no longer able to click in the Google search box.
This problems has been occurring on two different machines over the last two days.

I think this may not be a browser problem but rather a Google problem.
I am getting the same problem with the Google Chrome browser.

Search help for Web Dynpro using the SAP-search help

Hi,
Im trying to create a generic search help for Web Dynpro using the SAP-search help. It should working so, that I construct a Web Dynpro-component, that gets the data of the search help from the SAP-system, interpreted it and creates the ui-elements and the needed context generic.
The mapping between the Input field of the customerview and the right search help is to be made with an xml-file, which contains the information: name of the view, the input field, the search-help-name and the name of the field that will be returned.
The xml-file is reading from a helper-class. That helper-class contains any information, witch need the search help-component as well as the customer-component.
The initialization takes place in the method wdDoModify of the customer. The call of the search help from the customer should be implement with an Action, witch is bound to a Button(create dynamic in the helper-class behind the input field).
In a second foot should be create a plugin for eclipse, witch insert the used files (search help component, helper class, ) in the project. In addition it should create the call in the customer generic.
It would be great if someone can give me a feedback!

Hi Mike,
The BlanketAgreement.exe is a reference to the executable that will be created when you compile the solution you created in Part II - Part III. I think there is a mistake in the tutorial because it asks you to name the project 'Blanket' which means that by default the executable will be called Blanket.exe and not BlanketAgreement.exe. The tutorial also misses the step asking you to compile the Blanket project before you go on to create an installer. You should compile your Blanket project in Release mode before creating an installer. By compiling the project you'll get a Blanket.exe file in the bin folder of your Blanket project which you then need to add to the installer per the instructions.
SAP do offer development courses in some areas and there is training material here on the SDN and on the SAP partner portal (and maybe the customer portal as well). Try searching this forum for 'training' or 'tutorial' and you should get a few links. There's also a development certification.
Personally I'd recommend you give yourself a little project to work on and just get stuck in
Kind Regards,
Owen

Use a Content Search Web Part to Display a Picture

Hello -
Is there a way to use the Content Search Web Part to display the most recently added picture to a specified application?
Please let me know if you need additional information to answer this question.
Thanks,
Jordan

Hello Jordan,
I believe you could do this :
filetype:jpg OR filetype:png OR (and so on for all
images types)
AND path:"http://yoursite/youlibrary"
Regards
Samuel
Sharepointerie.com

In OS X Mavericks using Safari, the search bar at the top that i had on the previous system disappears only reappearing in the full screen. Do i have to go into full screen every time? Bit of a pain but no doubt I'm doing something wrong!

In OS X Mavericks using Safari, the search bar at the top that i had on the previous system version disappears only reappearing in the full screen. Do i have to go into full screen every time? Bit of a pain but no doubt I'm doing something wrong!

Those are all fine
Here is how to see RAM overloaded…
Reboot to see the system in it's default state.
Open TextEdit for the sake of it
Open Activity Monitor & Terminal from /Applications/Utilities.
Select the Memory tab
In Terminal enter the following command
memory_pressure -l critical
# note that is a lowercase L
RAM usage will climb, compression will begin the VM will become way more than the system has installed.
Eventually the system will start swapping (look for RED) - Watch the 'memory pressure' & 'Swap used' as this happens.
Try switching to TextEdit - the system is still coping !
Switch back to Terminal & hit ctrl+c to stop the process.
Watch the VM & memory pressure return to normal levels.
This OS kicks 4ss !
Your problems may lie elsewhere

Using SharePoint OOTB search with external DB

Hi All,
I am using SharePoint OOTB search to search for documents inside a document library. The document library has all the data except for two cases:
1- Value stored in SharePoint document library as ID but the actual name is in an external DB (example: Document 100 has an organization code 7200, the list of all organizations is in an external DB)
2- A look-up that exists in another SharePoint list with IDs only (example: a document 100 can belong to project 55, 66, 77). DocProject list that describes the 1:M relation is in the SharePoint list, however the project information for project 55, 66, and
77 are in an external DB.
When the user tries to search for a document by project or organization name, an external database should be involved to get the correct documents that fall under the search criteria.
Can you please advice me on how can this be implemented? What are the options that I have?
Many thanks

Hi Ashish,
Thanks a lot for the prompt reply and wish you a pleasant year.
Unfortunately this scenario is not working in our case!
In fact we have no problem at all if we added a new field to a list and configured it as a lookup field to an existing SharePoint list and then migrated its data and started to search by lookup name instead of ID.
Our problem still exists as we fail to repeat the same scenario with a list that exists in an external database and was shown in SharePoint using Business Data Catalog. Whenever the lookup list is an external DB list, we can not use the name instead of the
ID in search (even after we migrate the data, mark the field as a lookup field, and run full crawler)
We also searched the re-index feature but found that it is a feature in SharePoint 2013 while our version is SharePoint 2010.
Kindly advice as I am afraid we are missing a step or a certain configuration that makes SharePoint behavior different with BDC lists. Here are the detailed steps that I followed:
1- From Central Admin, Add BDC service to SahrePoint
2- Create a .net solution (SharePoint features BDC) that uses a web service that calls an Oracle stored procedure to get the data (full list) or (single Item) and maps them to BDC.readlist and BDC.readitem
3-Deploy the custom BDC solution to SharePoint
4- From SharePoint designer, create external content type that uses the custom BDC solution
5- In the created external content type, added two operations (New Read Item Operation) and (New Read list operation).
6- Create external list from the external content type
7- Add new column to the original list as a look up column with the property (Get Information from) set to the external list
8- Migrate data to the newly added column using SharePoint object model
9- Run full crawler job
10- Try the search, when searching by ID we get results, when searching by name, we get NO results!
Many thanks,

My 4s has grainy low res images when I use google image search, imdb and USA today app. But not FB. How do I fix this?

My 4s images are grainy and low res when I use google image search, imdb and a couple other apps. My photos roll pics are hi def just not images. What's up with this?

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

How to get Name 2 also when we search for a customer using 'Name' as search

In XD03, when I am searching for Customer using Name as Search term I am getting postal code, Name1, City, Customer no. I want Name2 also to be displayed. Can somebody please suggest.
Thank you.

hi,
for this you will have to change the search term involved during the master data creation.
now during the creation of customer master data , enter the name as the search term in the data base.
if possible change the database of customers and insert the name in the search term.
without it, it will be really difficult to locate the customers with the search term as their name
regards,
Siddharth.

I want to remove the yahoo search bar from Firefox and use the google search bar.

I did go to about:config and made the keyword.URL to default (Google). It is not getting affected. Please help me to know how can I set it in Firefox.
I need to remove yahoo search from my Firefox and use the Google search. I did the following steps for the same.
about:config, searched keyword:URL and reset to default.
But the change is not getting affected. Pls help

Work around that I have used (my machine is running Windows XP SP3 might work on other systems as well):
1) Ensure Firefox is closed, if necessary read this in another browser
2. Open the Firefox directory on the hard drive (typically: C:\Program Files\Mozilla Firefox)
3. Go into the 'searchplugins' folder
4. Delete the file named 'yahoo.xml'
5. Immediately restart your machine

I cant use the "google search" button but no proble, with internet explorer. The" feeling lucky" works.

i cant use the "google search" button with firefox 3.6.6 or even 3.5. I have no problem with searching google on internet explorer. The" Im feeling lucky" button works. The google search tab on the top right corner of firefox browser works fine. But the main google search button on the google site doesnt work. I havent changed anything. i cant do anymore google searches.
== URL of affected sites ==
http://www. google.com

When click on search, the Google search result didn't update (the google search page didn't change). BUT the url bar on top did have the Google URL updated with the new search term.
Something like
http://www.google.com/#hl=en&q=firefox+3.6+problem+with+google+search+button&aq=f&aqi=&aql=&oq=&gs_rfai=&fp=dd2d1939af06a5a
So the URL is changed when I click the Google SEARCH button on the page. Just the page not changed nor updated.
And when I click "Reload current Page", then the page is reloaded with the new google search result.

Using Thesaurus to search synonyms?

Similar Messages

Maybe you are looking for