Using third party service to access Project Online data.
Hi,
I have read an article: What's new and what's out for developers in Project 2013. There was a paragraph called "Comparing project server on-premises with Project online".
In that paragraph it is written (in part about Online Project):
"Can use the PSI, but not supported: no OAuth and no service-to-service connections."
Does that mean that I will not be able to connect to Project online account from another service to get data say for analysing on a different resource and after it send it back to Project online?
Thank you,
Ruslan
The only open question is what did they mean writing:
"Can use the PSI, but not supported: no OAuth and no service-to-service connections"
That's written about Project online
Does anyone know the answer?
Thank you
Similar Messages
-
How can i telnet or get access to other LAN members in LAN without using third party software?
I have admin access to the main router in our LAN, so how can i telnet or get access to other LAN members in LAN without using third party software?
its linksys3500 router and i login as admin using the gateway address in address bar..
i want to access the c drive of my colleague in same subnet in same office and i know his ip address.but he not configured telnet accept request.so without it how can i open his telnet port and access himI think you are using the wrong terminology. You can browse the hidden share of any pc if you know the ip and have a valid user account on the pc by typing in the following \\computername\c$ or \\ipaddress\c$ . It should prompt you for a user account. You may have to allow this through the windows firewall (or disable it completely).
-
I have admin access to the main router in our LAN, so how can i telnet or get access to other LAN members in LAN without using third party software?
its linksys3500 router and i login as admin using the gateway address in address bar..
i want to access the c drive of my colleague in same subnet in same office and i know his ip address.but he not configured telnet accept request.so without it how can i open his telnet port and access himDuplicate post.
-
how can I set a third party application to access my organizations intranet through my organizations network . I am using blackberry bold 9700 OS 6
Hi deepajithesh
This feature is not available. Applications access the BlackBerry Network using the connection to BIS.
Thanks
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)! -
Hi,
I want to convert word document to PDF, EPub, by using third party (.dll).
In SharePoint designer workflow in 2013.
So that I have question, Can we Install third party (.dll) in SharePoint workflow Designer for conversion?
Means I have created one simple application conversion of word to e Pub, PDF, Image by using (Spire.doc dll) in Visual Studio.
So this same conversion I want to work in SharePoint designer workflows?
So anybody has any solution then please provide me.
Thanks,
Samadhanit might be worth looking at these CodePlex steps, that plug directly into the Word Automation Services.
http://sp2010wordautomation.codeplex.com/
It'll provide you with a configurable step like the below that should help you achieve your aims
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem. -
Sharing photos to iPhoto without a third party service
Both my mother and I have iPhoto '08. She wants to be able to get to full-sized copies of my photos. I want to achieve this without using a third-party service (Dot Mac, Flickr, etc.) My Mac is configured as a server.
For awhile, I've tried posting full-sized album pages using iWeb, but the performance is terrible, even when clients don't try to get the full-sized images. iPhoto has some nice sharing features, so I'd like to get one of them to work, and would appreciate some advice from others on how to do so.
First, there's the "Sharing" iPhoto feature. This is limited to a local network, however. Ideally, I ought to be able to create an SSH tunnel and a Bonjour service proxy (using something like Network Beacon). However, when I try this, iPhoto displays but grays out the shared library (under "Shares"). I can't get it to work successfully. (If I do the same thing with my Web server, Safari loads the Bonjour web page without problems. Not sure what's going wrong.)
Second, there's "Subscribe to Photo Feed". This is really optimized for Dot Mac, but the "open" nature of the protocol, using RSS, makes it possible for others to create feeds. There's this post: http://www.macosxhints.com/article.php?story=20060722055330166f discussing CustomHTMLExport combined with a a custom RSS template. But it's all based on iPhoto '06, and I wonder if there's been anything better to come up since. I can't find any discussions about doing something like this that specifically talk about iPhoto '08.
Ideally, I'd like this to be transparent on both ends, just like LAN sharing or photocasting over Dot Mac. But I'm willing to do some work on my end if necessary.WIPHA seems to work. Webphoto also works (in 10.5, even), though support has been discontinued for some time. Webphoto's problem is that it doesn't display navigation links for photos bigger than 550 (width). The photo displays just fine, but does not include the links necessary to click through to the next or previous photo.
WIPHA's problem is that it ONLY sorts by date. The advantage of Webphoto was that it would display images in the same order as arranged in an iPhoto album.
I'm trying to use iPhoto as the source of slideshows for classes I teach, so that all I have to do for a class is arrange an album, and then fire up the web browser on the computer in my classroom (no exporting, no HTML pages, no duplicate directories...). WIPHA would work, only it won't display in the order I want. Webphoto would work if it would display navigation links with large photos.
Does anyone know of any other option for simply displaying the contents of an iPhoto album on the web without the botheration of separate web pages and exporting and all that crap?
(Or, is there a fix to WebPhoto that will display navigation links for large images?) -
Using third party jars with Oracle Business Rules
Hi
I am working on Oracle AS 10g release 2.
We are using Oracle Business Rules in integration with Oracle BPEL.
While using third party jars however, Oracle Business Rules end is facing errors.
Error during unmarshallingProvider com.sun.xml.bind.ContextFactory_1_0_1 not found
oracle.classloader.util.AnnotatedClassNotFoundException:
Missing class: com.sun.xml.bind.ContextFactory_1_0_1
Dependent class: javax.xml.bind.ContextFinder
Loader: oracle.xml:10.1.0_2
Code-Source: /D:/oracleasr3/lib/xml.jar
Configuration: <code-source> (ignore manifest Class-Path) in META-INF/boot.xml in D:\oracleasr3\j2ee\home\oc4j.jar
Can anybody help in figuring out where Jaxb jars(3rd party jars) are to be kept so that OAS access it?
We tried using the applib folder to load the jars but we are getting class loading errors.
When new instances are created, class loading is not happening.
Pls help.
Thanks
KavyaAre you using Application Server Release 3 or Release 2? There are different versions listed in your mail.
I think you probably want to add this as a shared library via EM and then import the shared library to your application with the application's xml config files. -
Dear Experts ,
I need to do a third party service order .
But in the system i can either use itemcategory D or S.
Also I cannot define a new Item category
Can anyone pls tell me how 2 do it ?
regards
anisDear Experts ,
The scenario that i am wanting to map is thus :
I have a few customers ( customer master records already exist ) , who are my dealers . We perform a certain service activities like getting our sign board installed & interiors to be done in our defined way at the dealer location .
These activities although performed at customer location , are paid for by us . Also i need to keep track of wat service is being provided at what customer location .
Hence any service that i procure needs to be associated with that specific customer master .
In third Party order ( Item category S ) i have a field of customer already available where i can enter that specific customer number & also get the reports for the same .
But i want to use service masters available in the system . This is not possible without using item category D.
How can i achieve both the things?
I cannot make separate addresses using mean for all those customers as it wud be duplication of data & create confusion .
Can there be a way out ?
Regards
Anis -
Currency Conversion using third party tool
Hi,
I am trying to access BW from a third party tool and so far been quite successfull accessing BW Infocubes and Bex Queries by using OLAP BAPIs. However my customer wants to use currency conversion as it is available in BEX in the third party tool as well. I need some thoughts in this direction from experts who have worked on Business Objects and BW integration.
I believe Business Objects has a similar interface with BW using OLAP BAPIs. Is there a currency conversion functionality available in Business Objects for BW? Would really appreciate if somebody, who has tried out this feature, can share some of his/her experience.
Thanks,
Anurag.Jean,
We use Maestro for all our scheduling scripts. To start\stop the
environment and start\stop applications. We create a shell script that uses
escript to start/stop applications. Maestro just calls the shell scripts
and monitor it for completion. I think you have to write the shell script
in a standard way to return an error if it does not finish properly. Here
is an example:
#!/bin/csh
source /appls/forte/fortedef.csh
$FORTE_ROOT/install/bin/start_nodemgr -fm "(x:300000)" -e TR2ProdEnv
ps -fu forte | grep -v grep|grep nodemgr>/appls/forte/production/scripts/KBB
set KBB=/appls/forte/production/scripts/KBB
if (-z $KBB) then
exit 1
else
exit 0
endif
Hope this helps.
ka
Kamran Amin
Forte Technical Leader, Core Systems
(203)-459-7362 or 8-204-7362 - Trumbull
[email protected]
From: Jean Mercier[SMTP:[email protected]]
Sent: Monday, April 12, 1999 10:36 AM
To: Forte-Users (E-mail)
Subject: Using third party tool to initiate a Forte batch program
Hello Forte Users,
Our company has acquired a software product called Maestro. It's a
production scheduling facility that manages tasks for batch mode
execution.
We would like to know if anyone out there has had any experience using
this
product with Forte. One recommendation that we discussed was to have
Maestro start a script on Escript to communicate to an agent that would
start the batch process at a specified time. Has anyone done something
similar or can offer any suggestions ?
Thanks in advance,
Jean Mercier
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/> -
Can i add third party Charting contol to Sharepoint online
HI
I plan to use Third party charting control like Kendo UI, can I do it on SharePoint online.
TIAHi Michael Steward,
I just want to add comments to the PDF in the workspace (trying to add comments to the pdf, which was provided as a task to user, should open in workspace, add comments online and then submit) .
How to accomplish this??
Please suggest. -
How to use third party library (like .dll and .lib files) in flascc?
I have a number of .dll and .lib files of the third party library, which are generated from C++ code.
I read about flascc on other web site says:
"If you want to use third party library in your Flascc project,you must have either the source code or the linkable file which is compiled of the third party library "
Dose the linkable file mean .dll file or .lib file?
AND
How can I use the fuctions in them in my flascc project.?Native code is not interchangeable between platform.
It means that you can't use library that wasn't build specifically for flascc.
And when they say linkable files they mean libraries compiled for flascc, not any libraries.
So if your libs are for windows, no luck, you have to recompile everything -
Can songs uploaded using the iMatch service be accessed by other family members using the Family Sharing feature?
No
Which purchased content can I share using Family Sharing - Apple Support -
How to do XMLDSig using third-party JCA providers?
Hi all,
Can anyone please let me know how to do XMLDSig using third-party JCA providers? The Sun XMLDsig documentation says that "A JSR 105 implementation SHOULD use underlying JCA engine classes, such as java.security.Signature and java.security.MessageDigest to perform cryptographic operations", but it doesn't say how to define the JCA provider programmatically. I don't want to change the Providers order in the security.properties file.
Do we need to make any changes in the JCA provider classes to work with XMLDSig and XML encrypt?
I'd appreciate your help.
JoeHow to identify whether the third party app has registered URL scheme or not. I also send a request mail to the third party app developers regarding URL scheme, but there is no reply from them.
-
How to use Third Party DLL in Adobe Illustrator Plug In
Hi Everyone,
I want to design plug-in for Adobe illustrator CS6(64 bit). As first step I am referring sample plug ins from ../SDK/SampleCode. I am not getting how to use third party DLL in plug in.
Please let me know how to refer C# DLL in illustrator plug in.
Thanks in advance.There's no C# API for the Illustrator SDK, so your plugin must be C++ at the very least. That said, you can probably write a bridge if you need to call out to a C# library/DLL.
-
Hello MM Gurus,
Kindly guide me as to how to configure the scenario of procurement of
Third Party Service in SAP.
Regards
YogaHi,
Very first maintain one field in Material master as acount assgnment group in sales order 2 screen.This is related with Third Party.
Create Salse order.
Then dispaly sales order number which will give ur PR number.
Convert this PR into PO.Here check item catagory as well as a/c assignment with third party.Put customer number in delivery addredd tab.
Do GR. By 101
Do ERS or MIRO for Perticular PO.
If ur issues get resolve then Put suitable points.
Navneet.
Maybe you are looking for
-
DVD menu glitch at end of loop
I've just used iDVD '08 to create a project using the iDVD 6.0 theme "Reflection White". The main menu loop runs a bit less than 30 seconds. In the iDVD app, the transition from the end of the loop to the beginning is seamless, both in the Motion mod
-
How to read the content of this excel file in LV
Hi could you please let me know how can I read the content of this excel file using the Read From Speardsheet function. It contains text and numbers Thanks The excel file is attached Attachments: Datalogging.zip 307 KB
-
Creation of a follow-up document
Dear experts, In the Web IC, I would like to create an activity as a follow-up document of another contact. In the "Follow-up" block, I select my transaction type and then click on the "Follow-up" button. Then I can access my new contact by clicking
-
Integrating weblogic server with portal
Hi Friends, Can any one tell me the procedure how to Integrate application server like weblogic with portal. Thanks
-
Need help about purchase requesition
Hello every body i have an automatic generated purchase requesition from project system and i want to delete it . when i choose to change the PR i found the delete button is not active. did any one have any idea about how