Using this forum - email notification of response ?

How do I receive notification if someone has responded to my question?
I realize I'm probably missing something obvious, would you please respond to my email at [removed by moderator] because I have no idea how to use this flash style forum.
Thanks, Garrett

It's a setting in your "Your Stuff" -> Preferences:

Similar Messages

  • Using Namespace in Email Notifications

    Using Namespace in Email Notifications
    How Can I Use Namespace To Make Emails Sent to the Performer of Approval Tasks More Dynamic? 
    Here are two examples of the use of Namespace to dynamically populate email template with more information about the task.   
    Queue Approval Email Template
    See atttachment 1
       2. Queue Review Email Template
    See attachment 2   

    greenfan88 wrote:The Email template is just a template any variable value setting has to be done outside.This is not true for 6.0 and later versions. Replace the <Variable> block above with the code below and the fullname variable is set correctly within the email template.
    <Variable name='fullName'>
        <concat>
          <ref>lastname</ref>
          <s>,&#160;</s>
          <ref>firstname</ref>
          <ref>thePrefix</ref>
        </concat>
    </Variable>It seems just rules are not run and I am still wondering whether this is the expected behavior of 6.0 and later or I missed something?

  • How can I use this forum?

    Does anybody here can tell me how can i use this forum???

    What do you want to do? What is your question?
    Randy

  • Forum email notification link lead to a redirect

    Hi all,
    we used WPC to establishing wikis and forums in order to easily share and contribute knowledge and information in our Netweaver Portal.
    Well, everything works fine except for the email notification sent to the end user. By clicking the link provided in the e-mail the user can see the thread content related but after just a few seconds the web page redirects to the portal home page...
    Any help would be appreciated.
    Thanks in advance

    Hello Anju,
    i use Outlook 2010 (beta) without problems. All mails from apex show me the links.
    I think you must change your outlook-Settings (i.e. security).
    Carsten

  • Forum Email notifications will not turn off!

    Was receiving email notifications for it seems like every post on these forums. Went in, turn off email notifications for everything thing. Check again just now. Save settings are everything is "No" or "Turned off".
    But still receiving email notifications from these forums for every post that anyone makes here.
    How do I turn this thing off? My inbox is loaded.

    Go to your profile page.
    Select the Notifications tab clear out anything that shows there.
    Go back to your profile
    In the Actions box select Preferences
    Select the Email Notifications Preferences tab
    Set the values as you like
    Go back to your profile
    In the Actions box select Manage Email Notifications
    delete any that show
    that should do it

  • Cómo utilizar este Foro / How to use this Forum

    Bienvenidos al Foro de Nómina Española!
    No duden en tratar aquí cualquier tema relacionado con nómina española.
    Nuestros moderadores supervisarán frecuentemente el foro.
    Como el foro está estrechamente vinculado al idioma Español y a textos legales en dicho idioma, gran parte de su contenido se desarrollará en castellano. El inglés también es un idioma admitido.
    Adicionalmente por favor colaboren en la mejora del WIKI ERP Human Capital Management, especialmente en las siguientes areas:
    http://wiki.sdn.sap.com/wiki/display/ERPHCM/ERP+Human+Capital+Management
    http://wiki.sdn.sap.com/wiki/display/ERPHCM/SAP+HCM+Payroll+Spain
    English Version
    Welcome to the HCM Payroll Spain Forum!
    Do not hesitate to post here any issue related to Spanish Payroll.
    Our Moderators will also frequently check this Forum.
    As this country version is strongly related to spanish language and texts of law we will run this forum mainly in spanish language. English language is also allowed.
    Please also help us improving the ERP Human Capital Management WIKI specifically in these areas:
    http://wiki.sdn.sap.com/wiki/display/ERPHCM/ERP+Human+Capital+Management
    http://wiki.sdn.sap.com/wiki/display/ERPHCM/SAP+HCM+Payroll+Spain

    Quote
    New System, Lots of problems!!
    KT4 Ultra (MS-6590 v1.X), AMD XP 2700+, 1Gb DDR PC3200 400Mhz Mem, Ati Radeon 9700 Pro, Creative Audigy + Live! Drive, 120Gb Maxtor Hdd ...Plus modem & Lan Card....Os: Win XP Professional Edition.
      All Drivers + Bios absolutely up to date, DX9.
     DXdiag, Now informs me that Direct 3d can't be used...Now let me get this straight, I can run applications..lovely,.......But I can't THRASH all the games!!!
    Have tried re-installing AGP drivers + Dx9, but no luck so far...
    Ps. Self-built Custom System.
    Anybody out there got an answer?
    I think this post was in error, I have PM'ed and e-mailed this user if I get no reply I will remove it in 24 hours regardless
    GF

  • How to use this forum's search

    Hi
    Is there an easy way to search just this forum? When using the "Search Forums" box at the top right, I get results from all different forums.
    I know I could go into "More options" or whatever its called, spend a minute or two finding the right Forum in the list and select it, hoping I got the right one. Thats not usable at all.
    Whats the better way?

    Quote
    New System, Lots of problems!!
    KT4 Ultra (MS-6590 v1.X), AMD XP 2700+, 1Gb DDR PC3200 400Mhz Mem, Ati Radeon 9700 Pro, Creative Audigy + Live! Drive, 120Gb Maxtor Hdd ...Plus modem & Lan Card....Os: Win XP Professional Edition.
      All Drivers + Bios absolutely up to date, DX9.
     DXdiag, Now informs me that Direct 3d can't be used...Now let me get this straight, I can run applications..lovely,.......But I can't THRASH all the games!!!
    Have tried re-installing AGP drivers + Dx9, but no luck so far...
    Ps. Self-built Custom System.
    Anybody out there got an answer?
    I think this post was in error, I have PM'ed and e-mailed this user if I get no reply I will remove it in 24 hours regardless
    GF

  • Questions for anyone using this forum

    is this forum only for people who have problems with apple stuff to go and complain so that we feel better, because i've posted numerous questions on this and other forums, non have gotten replies. i really feel as though this is only a place where people can go to vent some frustration with things. i'm not even sure if there's a guy (or team,which there should be,) out there just looking at these questions and trying as best as they can. now i understand if its only a group of like ten gpeople there to help us because there has got to be at least a million people, if not more, out here sing mac products and experienceing problems. i just want to know if its really that hard to get a little responce about things. we have problems, we come here for answers because thats where apple tells us the answers are.
    now my latest question may not be able to be answered by an apple tech, but, where is the best place to hock an iPod for $$$. mine is dead and will not come back to life. i want to get another iPod but its not in my budget unless i can sell my current dead iPod to put a down payment on a new one. so if theres anyone out there with an answer, please respond, otherwise its like talking to a wall.
    Windows XP Pro 20 gb iPod photo

    No, this is definately not a place just to complain so you can feel better. These are user-to-user support forums. Nobody here works for Apple (other than an occasional moderator). We're just users like you who enjoy helping others.
    I haven't seen your other posts, but usually if a post goes a while without a response, it's because the post either doesn't provide enough information, or is just a rant and doesn't ask a specific question. Post a detailed description of your problem without ranting about it and you will be very likely to receive help.
    If your iPod is dead, you can either sell it on ebay or somewhere (people will buy non-functioning iPods), or take it to an Apple store and give it to them and receive 10% off a new iPod.
    Cheers!
    -Bryan

  • Using this forum to express concerns

    It is a complete waste of time posting anything on this forum as it is modded by BT staff who give you the same drivel that you get if you phone, email or write to them. 

    Having read your original post:-
    "Having (like my neighbours) lost one phone line yesterday I have now lost my fax line to the above engineers. BT seem to think it is acceptable to leave their customers without landlines for a week ( fault will be rectified by the 26th of May they tell me!!!). I don't seem to remember being allowed to settle my not inconsiderable account late!!!!"
    You seem to be just wanting to rant about the lack of urgency with BT repairs service and not asking for anything to be done so you would appear to have been lucky in getting any reply let alone an informative one which sets out the time scales that BT/Openreach work to.

  • Turning off forum email notifications

    Hello,
    Has anyone worked out how to turn off the email notifications from the forums.
    Please help!!!

    Here is where it's done:
    Then:
    Good luck,
    Hunt

  • I no longer use this current email address... but still want to use Thunderbird for another email address

    I tried to change this current email to another email address... with no luck... then I trashed the old email... and downloaded to set up another email address... with no luck... it kept going back to the old...
    Please assist..

    '''File|New|Existing Mail Account'''
    No menu? Press alt.
    Or right-click an existing account, select '''Settings''', and in the window that pops up, click '''Account Actions''' at the bottom, then '''Add Mail Account'''.
    Or press the button with three horizontal lines, hover the cursor over '''New Message''' (yes, really!) and select '''Existing Mail Account''' from the pop-up menu.
    Changing one account to another is rarely successful. Always better to add an account rather than modify an old one. That's how Thunderbird is designed to work.

  • Help on using this forum

    Hi,
    I was just wondering how to keep track of the "last message seen" :-)
    eg: when i shut-down my pc on friday evening, and return on monday morning, there are dozens n dozens of new messages. is there any way i can set a time-stamp before exitting on friday, and then, on monday, i can see all the mew messages. right now, i try to remember it manually, but due to a different timezone, it messes things up.
    thanx n regards

    thanx all for ur replies:
    the prob i face is this:
    suppose i dont check this forum for a day. there are too many messages and new Threads. I m usually interested in looking at both. currently, i m adopting a very conventional and crude method. note down the time of exitting. then, when i relogin, i try to find that time. usually, it is atleast 10 pages behind. once i find that time, then i again scroll forward thru the pages, scanning messages one by one.
    do any of u have a better approach ?
    thanx n regards

  • How do you control Adobe Forum email notifications?

    How can I control the email notification process which automatically sends a copy of all replies to each thread in which I am participating?
    Right now I have taken the process for granted, letting it do it own thing, and am automatically getting email notification for all the threads in which
    I am participating. That is OK with me.
    Due to questions on email notification how to that I have received from others...
    How would I go about setting up the process so that I could pick and choose which thread replies should be send to me by
    email notification? Is there a thread subscription preference somewhere?
    And, how do I turn on and off email notification altogether if I wanted to do that?
    Thank you.
    ATR

    Click your avatar picture near the upper right corner (slightly to the left of the pencil) and select PREFERENCES then set all Email Preferences to OFF and click Save at the bottom left
    AND
    Another new "feature" is that Jive7 is oriented toward social networking... so every time you start or reply to a message you are automatically added to a FOLLOW list... meaning you receive a notification of every subsequent message in that thread
    Click the FOLLOW link at the upper right and select STOP FOLLOWING... and don't click the link again to check your status, as you will then be added to the CONNECTIONS STREAM and you will have to uncheck that option as well
    And, after you post in a message thread and select Stop Following, you need to do it all over again the next time you add a reply to the same message thread, since EVERY POST adds you to the automatic Follow list

  • How to use this forum - is there a way i an receive an email alert ?

    Hi Everyone,
    Is there a way I can receive an email alert when I post,
    or when I want to follow another's post?
    Is there a way to receive an email digest of the day's posting actiivity?
    pls advise, tx, sandra

    Hi Sandra
    You can flag a thread to be watched and you can flag that all threads that you post to can be watched. To set this up click on the Watch this Thread link and then click on the Watch Options link alongside. You can unwatch at any time.
    Your watched threads will have an icon of a small pair of binoculars to the left.
    From the master list of all threads in the forum there is also a link called Watch Forum. I haven't tried it but presumably checking that means you get emails on everything. As suggested by Nancy below you may well get inundated. I don't think I would like to be informed of all threads as I like to visit in my own time, something that I do several times a day.
    Best wishes
    Michael

  • On my iphone 3G, I used to get email notifications without checking manually, on my iphone 4 not so much.I went to the Genius bar and they had me send a test message while I was there and i got a notification right away, but prob still exist w/ mobile me.

    I just want to know why I have to open my mail app to get my emails. On my 3GS I used to get notified without opening the mail app and now on my 4 i don't get the same functionality. I have a mobile me account, and I have my settings set to receive push notifications every 15 minutes....what gives?

    If you are getting Siri when you double tap, then your home button must be sticking. Siri comes up when you hold the home button. Try tapping quickly twice. When that happens, the multi-tasking list comes up and you will see the app icon and then a thumbnail, or reduced size view of the app above it. You put your finger on that thumbnail and swipe upwards with your finger.
    For that issue, you might want to do a reset of the phone. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will reboot. This will not affect your data.
    To be honest, your novel is a little difficult to read, and I think you put too much information in there, and a lot of it is unnecessary. Be to the point and just add information necessary to understand the issue.

Maybe you are looking for

  • Iphoto 6 toolbar stopped appearing in full screen (mouse moved to bottom)

    I have iPhoto 6.6 on an iMac core duo running osx 10.4.11. While it formerly worked correctly, now the toolbar no longer appears when the cursor is moved to the bottom of the screen in full screen edit mode. I have determined the following: The probl

  • Custom component not found by jsf (mojarra)

    Coming from this link http://forums.sun.com/thread.jspa?threadID=5446475&tstart=0 I have managed to get things together but for some reason, my app is not able to find the custom component at runtime. I have the component configured in my web.xml so

  • Printing multiple double-sided Word documents results wrong side being used

    When printing from MS Word (Office 2004 11.2.5) several Word documents in rapid succession (so the first has not finished by the time the second has been received by the printer) in double-sided layout (as per the Print Dialog option) and the first d

  • How to install drivers for importing and burning CDs

    When I open my iTunes program, I receive a notice that: the drivers for importing and burning CDs and DVDs are missing.  I have attempted to re-install the iTunes program, but to no avail. 

  • Xbox 360 meets IMAC

    Is it possible/advisable to run an xbox 360 through an IMAC. will there be significant delay? how is it done? Thanks J_Rock