Using Tiger 10.4.11 names disappear in System Preferences System Accounts

Problem one---I am trying to delete my accounts in my classroom. I go to system preferences>Accounts, and nothing shows, blank screen... nothing. I click "Show All" and all the menus return.
Problem 2- Upon trying to do the same thing as in problem one, when I "do" get to the screen that shows all of the user account names, I click on the "minus" sign to delete an account name, the computer freezes.
Thanks! I hope I explained this clear enough.

Are you logged in with an account that has Administrator priviliges?
By the way, this forum deals specifically with Final Cut Pro, video editing software. You will probably get better answers in the Mac OS X section of Apple Discussions:
http://discussions.apple.com/forum.jspa?forumID=748

Similar Messages

Using Tiger 10.4.7 with AD 2003 and problems with rq'd Password Change

I have been able to successfully change my password 4-5 times before in my scenario using Tiger v-.2->.6 and have never had a problems.
Now I just changed my old expired password, as req'd from the AD policy, to my new Password on my XP box and have a Mobile account on my Powerbook that won't let me in now using my new Password. It says I am unable to use this <name> account at this time. Is there a propogation time to pass?
Local Admin account on PB can sign in fine- My alternate Systems Admin account <mobile> can sign in as well fine. Other local accounts work well as well.
As a mobile account I cannot change my password without being connected to the AD network at this point (no access through local System Prefs). Has anyone ever experienced this? Or is everyone still shying away from Mobile accounts usage and Homesync (Works great on my machine - problems with other accounts/computers)- I'm sort of a Mac/AD Daredevil here in XP-land, since we only really support Macs because our CEO won't (refuses to) use XP and I am a Jedi Knight inside the Dark Star (Just learning XP/AD to get steady work).
Anyone out there have anything to add/suggest? THX

The admonition not to use the Tiger install disk utility only applies to repairing permissions. You can use Disk Utility from the install disk for verifying and repairing your hard drives. However, with Tiger, you can now verify your boot drive with Disk Utility from your boot drive itself (this only works if you have disk journaling turned on and it's on by default). If the drive would need any repairs then you would have to boot from the installation disk to repair it.
Disk Warrior is probably the best hard drive maintenance utility in the entire Macintosh universe and it works fine with Tiger. Just make sure you have the latest version which is 3.0.3 I believe.
In my opinion the iLife suite of programs is absolutely essential for the complete Macintosh/OS X experience. There's nothing like it on any other platform, period. It's a true work of excellence.
You will enjoy the stability and compatibility of Tiger especially when on the Internet. The latest version of Safari is the best yet.
Dual 2.5GHz G5 Power Macintosh Mac OS X (10.4.7) 1.5GB RAM 20" Apple Cinema Display

Still Using Tiger, Was getting Ready to Install Leopard..

Hello-
I am still using Tiger but was getting ready to purchase Leopard, get the Missing Manual for Leopard and then Snow Leopard came out. So, I am getting a new MacBook Pro and that comes or is already installed with Snow Leopard. I was going to order one of David Pogue Manuals: Snow Leopard: The Missing Manual, or another one when someone changes, I think, from a Windowez-based OS to Snow Leopard OS X.
After thinking about it, I am wondering should I be getting both or for now just the Leopard Missing Manual rather then Snow Leopard: The Missing Manual. Is Snow Leopard like Leopard? Do you think I would be better off knowing or having a reference available for Leopard and trying to use The Leopard Manual initially rather then the snow Leopard. From what I have read, it sounds like Snow Leopard is almost like a major Leopard update, but I could be wrong.
I am not sure. I don't want to be (again) like the lost guy because I skipped a step. Also, there are a lot of manuals out on these topics but David P's is still not out (as far as I know). Would anybody recommend one of the other manuals that are out?
Thanks for your help. For somebody like me learning this stuff is hard. It does not come naturally so I am looking forward to having a good resource like these Missing Manuals available.

Neville- (I hope you can read both sections because I am curious to know if you are familiar wit what I am trying to describe in the second paragraph.)
I am not sure I can accurately explain why I have not done these, but I did do something like this and I had the applecare lady on the phone so I knew she could help me if I messed up. It was something very similar but there were 2 options to repair (choose repair I should say). One said it was very short in length and the other was very long. I do not remember holding down the "C" key but I might have held down the command or some other key. Also I did not get the chance to go any further because I did not pick the short method, I chose the long one and I had to run. The applecare lady was actually not on the phone the whole time she gave me her extension to reach her if I needed to. I thought that was nice.
When I got the MBP about 3 years ago, I was going to do some fixing and I called applecare. They told me (and her is where I am not sure of my facts) that the TechTool should not be used for some reason. They told me to go to the apple support page, get a DVD that allows you to "write" and find the latest DeluxeTechTool (which apparently did not come with my machine because it had not been out yet). Once I copy the Tool from the site to the DVD, I then use that and insert it before I boot up and the rest I forget.
Do you know anything about this? I remember going to the area she said and seeing the ability to download and copy the newer DeluxeTechTool but I did not do it because at Best Buy I could not find anybody who knew the kind of DVD I would need nor what the ones they did have were for.
I do need this info. too because I have never backed up the machine. If I get a new one I want to get into the habit of backing up all the time, but I will have to learn to. If you know of where a good place is on the web that describes what the R, RW, C, CR, etc. mean for the DVDs and CDs. Even at Costco every worker in electronics did not know the answer to that question.
Some I would need to just burn or copy one thing onto either the CD or the DVD like that DeluxeTechTool and some I would want to keep copying or burning multiple times. And then even some I would like to be able to burn songs on them and transfer them to my iTunes and use that same CD or DVD for a movie to be able to do it over and over again. (Unless the quality goes down with each copy and overwrite I do.)
thanks for your help with the "repair procedure" but I could tell there are some things left out that I would not know what to do. I know now because of what I recently did by the "Apple self test" or whatever it was called I did. Questions I would have would be; when you say insert the original software DVD, I would need to know when do I insert and I think I have 2 CDs that came with the machine. Is there one that says "software" and the other says "hard drive?"
When you say C key are you talking about the key with only the "C" on it?
If I repair permissions all the time by using disk utility while the notebook is on, why dos it say it repaired so many (I forge the word it used) but it will then give what it repaired. It will say things like ro-ororro-o should have been ro-ro- . Things like that.
My final question is, somebody told me if I hold down the shift key and restart the computer and keep holding the shift key until the turning wheel stops and it says "Safe Mode." They told me doing this is the same as repairing the permissions by the more complex way. it is interesting because it does create some a long what appears to be either a file name or something like when you start disk utility just by using the utility.app on my dock, once you start that up and get ready to use it there are 2 long (I am not even sure what to call them) but one has Media in it and then the long list of letters and I think numbers and one just has the long list of letters/or numbers. It is here that I never understood which one is my hard drive and which one to select or repair the permissions. The example is terrible because the picture in the Help page shows a list that is about double the length of mine and is very hard to know which list to pick to be repaired. Also when they say pick your hard drive, I have no idea which one is my hard drive. It does not say "hard drive" next to the numeric code but I think one is left aligned and the other is aligned center or something like that. Also, one code I think has "Media" next to the numeric name.
Thanks for listening to this. I doubt it makes much sense but maybe with you seeming like an expert in Macs, you might be able to figure out what I am trying to say.
Peace

TS1468 Albums split & Album Names Disappear

I'm sorry, but not only did songs from the same album now get split but all my CD imported album names disappeared and therefore my album art is missing! I know how to fix it, the question is why should I have to fix it in the first place? I have 1000's of songs from CD's, so fixing this for every album problem I have will take days!!! What's up Apple?!? Why do you always break what don't need fixin'?!?

Not sure what Apple means by "compilation," but just checking that with a grouped selection doesn't necessarily combine them into an album (for me). The artist seems to be a factor, too. I have several collections of tunes from the same CD (or two CDs together) that have different artists and are not recognized as the same album even when "Compilation" is checked for the selected group. Other similar CDs I've imported do become one album (naturally). Apparently, iTunes uses some additional factor to identify the members of an album, and I don't know what this is . . . yet. Examples of where I'm having problems are with "samplers."
PowerBook G4 Mac OS X (10.4.7)
PowerBook G4 Mac OS X (10.4.7)

How Do I Make My Name Disappear From Menu Bar?

I use Mavericks OS X 10.9.3. How do I make my name disappear from the Menu Bar?

Or select to show the icon instead of your name in case you want to keep the ability to use FUS while gaining precious menu bar space.

Publish iCal Calendar using Tiger Server

I've been searching for a simple way to publish iCal calendars using Tiger Server. Here is what I need to do:
I need one user to be able to publish multiple "studio schedule" calendars to the Tiger server...and I need all the regular users in the studio to be able to subscribe to it so that they can see what work they have scheduled for the day. The regular users do NOT need to be able to make changes to the calendar...they only need to see it. (and print it if needed) Only the studio manager needs to be able to see and edit the published calendar.
I called Apple support for help on this one and they told me they would have to charge me $695 just for me to be able to get help on this....which surprised me because I'm just trying to use their software to do something it is supposed to be able to do! LOL The only other suggestion he could give was for me to look to the discussion groups here for help....so here I am!
HELP!
xServe G5 Mac OS X (10.4.6) xServe G5

The first thing you need to do is set up WebDAV on the Server and share a directory. If you need instructions on how to that just follow this thread.
http://discussions.apple.com/message.jspa?messageID=2793917#2793917
Once you've set up a shared directory you just publish the calendar to it from within iCal.
To do that, set up a calendar, select it and then select 'Publish' under the 'Calendar' menu. In the dialog box that opens up give the calendar a name without spaces. Select 'Publish on: a Private Server'.
In the field for 'Base URL:' fill-in the complete url to the server directory you set up previously using the WebDAV instructions. For example, if you set up a directory on the server called 'calendars' and the URL of the server is www.example.com you would put in 'Base URL: http://www.example.com/calendars'.
Now enter the 'Login' name and 'Password' for an account that has access to the shared directory as you've set it up using the WebDAV instructions.
Select the other options you want to enable in the dialog box and then click on 'Publish'. Now the calendar is published and available for others to subscribe to.
Now to subscribe to the calendar, just select 'Subscribe' under the 'Calendar' menu in iCal and enter the URL for the calendar. Using the example from above you would enter 'webcal://www.example.com/calendars/StudioWork.ics' for a calendar that was named 'StudioWork'.
You can also email the URL for the published calendar by selecting it in iCal and selecting 'Send Publish Email...' under the 'Calendar' menu in iCal.

File name disappears

With BEx Analyzer 7.0, I create a workbook from scratch, not using SAP template, switch to design mode, insert a grid and when I toggle back to analysis mode, Excel file name disappear from the Excel top menu as well as from the window toolbar. I installed the latest front end patches without any success. Any thought?

Hi Anoop & Heidi,
Thanks a lot for your reply. It was really helpful.
When contacted the framework people, they informed that once a file name is being specified in the client and a roundtrip is performed, in the meantime the file gets uploaded to the server. The file path is reset afterwards, in order to prevent the file from being transferred again and again.
Regards,
Deebika

When I upgraded to ios 5, it asked me a for a new game center name. How do I use my old game center name, since it makes me start some games over without it?

When I upgraded to ios 5, it asked me a for a new game center name. How do I use my old game center name, since it makes me start some games over without it?

Carefully follow steps 1-9 outlined by wjosten in this post: https://discussions.apple.com/message/13356770#13356770. This will not, however, avoid wiping any non-purchased media from your phone (ripped CDs, etc.) as this is only synced one way: from your computer to your phone. You will have to either rebuild your iTunes library with this content and sync again to restore it to your phone, or purchase 3rd party software to copy it from your phone to iTunes prior to syncing (such as Touch Copy).

I'm using Tiger 10.4.11, I had to wipe my drive an reload my whole operating system recently, now my Itunes does not work, it says It's version 4, what the heck is version 4, where can I get a compatible version that works, and accesses the store like I

I'm using Tiger 10.4.11 and had to wipe my drive and reload my system from the install discs yesterday,
Now I'm running Itunes version 4! It won't let me access the store, I've tried everything on the help pages,
EVERYTHING, I need a older version of Itunes, but not as old as version 4, which, no, it will not upgrade
automatically for me, it says no upgrade available. Why does Mac not support older versions of
its operating systems, why do they make it so hard to find help for those system users other than
the money of course, but have you seen the stock lately? They got enough money.

Yup, your question and Diane's answer helped me also. Tho' I had had problems before getting into the iTunes store I always managed to find a way. Today they had me blocked cold with the "Update to 10" advert no matter what I did. Other questioners are being told, incorrectly as it turns out, that they have to update their OS to accomodate iTunes 10 and upgrade to iTunes 10. I did the download which did not take up much more room on my crowded old hard drive and now I'm back in business.

Timeouts while using LDAP and TNSNAMES for names resolving

I use an OID for Oracle Names resolving at the client-side.
I tested some errorcases because there are no HA-features implemented for the OID.
So i have an LDAP.ORA with the adress and the ports of the OID.
My SQLNET.ORA has this content:
NAMES.DEFAULT_DOMAIN = <my_company_domian>
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (LDAP, TNSNAMES)So actually there is no problem. But when i turn off the OID-Server there iss a timeout of about 20 second to resolve the name.
So my problem is not the resolving. I only want to know if there is a possibility to minimize the timeout to switch between LDAP-name-resolving to tnsnames.ora-name-resolving?

thanks Oviwan but i think this problem couldn't be solved with a parameter.
@rgoogld:
I already feared that i have to live with that timeout.
But your options are interesting. In the future i will have 2 OIDs and in the first time the TNSNAMES.ORA-names-resolving as backup.
I already can test this because i have a productive OID and one for test-purposes. So at the moment i have two OIDs listet in my LDAP.ORA.
example:
DIRECTORY_SERVERS = (<server_name_oid1>:<Port1>:<Port2>, <server_name_oid2>:<Port1>:<Port2>)
DEFAULT_ADMIN_CONTEXT = ""
DIRECTORY_SERVER_TYPE = OIDThere is already a (about 20 seconds) timeout, when the OID1 is powered down or the services are stopped. The client honestly ask the second OID after the "timeout" and resolve the name.
2 OIDs+TNSNAMS or 1 OID+TNSNAMES in both cases your options could perhaps prevent the timeout. I'm not really a system administrator, but i can discuss it with my colleagues here.
Do you know a smart way to remove or repoint an DNS-entry in a windows enviroment. For such actions i have also to monitor the status of the OID-services or the servers and make the dns-changes if something is crashed.
At this moment i have no idea how to do this but perhaps you or someone else here have some tips for me.

How can I use the same Game Center name on my iPad and my iPhone?

Is there any way to use the same Game Center name on two devices?

If you signed into Game Center in Settings > Game Center on both devices with the same Apple ID, you should have the same name in both centers.

How can I uniquely identify computers on the same network/account specifically for airdrop use? When I change name on one computer under contacts if changes on all computers.

How can I uniquely identify computers on the same network/account specifically for airdrop use? When I change name on one computer under contacts it changes on all computers. I would like to change icon and name for each computer.

you would need to setup a VPN and tunnel into your office.
FYI..the default ports are 3283 and 5900.

SSMS 2012:FOR XML PATH Using XPath Node Tests-Columnn name 'test()' contains an invalid XML identifier as required by FOR XML?

Hi all,
I am learning XPATH and XQUERY from the Book "Pro T-SQL 2008 Programmer's Guide" written by Michael Coles, (published by apress). I copied the Code Listing 12-8 FOR XML PATH Using XPath Node Tests (listed below) and executed it in my
SQL Server 2012 Management Studio:
--Coles12_8.sql // saved in C:/Documemnts/SQL Server Management Studio
-- Coles Listing 12-8 FOR XML PATH Using XPATH Node Tests
-- Retrieving Name and E-mail Addresses with FOR XML PATH in AdvantureWorks
-- 16 March 2015 0935 AM
USE AdventureWorks;
GO
SELECT
p.NameStyle AS "processing-instruction(nameStyle)",
p.BusinessEntityID AS "Person/@ID",
p.ModifiedDate AS "comment()",
pp.PhoneNumber AS "test()",
FirstName AS "Person/Name/First",
MiddleName AS "Person/Name/Middle",
LastName AS "Person/Name/Last",
EmailAddress AS "Person/Email"
FROM Person.Person p
INNER JOIN Person.EmailAddress e
ON p.BusinessEntityID = e.BusinessEntityID
INNER JOIN Person.PersonPhone pp
ON p.BusinessEntityID = pp.BusinessEntityID
FOR XML PATH;
I got the following error message:
Msg 6850, Level 16, State 1, Line 2
Column name 'test()' contains an invalid XML identifier as required by FOR XML; '('(0x0028) is the first character at fault.
I have no ideas why I got this error message. Please kindly help and advise me how to resolve this error.
Thanks in advance, Scott Chang

Hi Michelle, Thanks for your nice response.
I corrected the mistake and executed the revised code. It worked nicely.
I just have one question to ask you about the appearance of the xml output of my Co;les12_8.sql:
<row>
<?nameStyle 0?>
<Person ID="1" />
697-555-0142<Person><Name><First>Ken</First><Middle>J</Middle><Last>Sánchez</Last></Name><Email>[email protected]</Email></Person></row>
<row>
<?nameStyle 0?>
<Person ID="2" />
819-555-0175<Person><Name><First>Terri</First><Middle>Lee</Middle><Last>Duffy</Last></Name><Email>[email protected]</Email></Person></row>
<row>
<?nameStyle 0?>
<Person ID="3" />
212-555-0187<Person><Name><First>Roberto</First><Last>Tamburello</Last></Name><Email>[email protected]</Email></Person></row>
<row>
<?nameStyle 0?>
<Person ID="4" />
612-555-0100<Person><Name><First>Rob</First><Last>Walters</Last></Name><Email>[email protected]</Email></Person></row>
<row>
<?nameStyle 0?>
<Person ID="5" />
849-555-0139<Person><Name><First>Gail</First><Middle>A</Middle><Last>Erickson</Last></Name><Email>[email protected]</Email></Person></row>
<row>
<?nameStyle 0?>
<Person ID="6" />
122-555-0189<Person><Name><First>Jossef</First><Middle>H</Middle><Last>Goldberg</Last></Name><Email>[email protected]</Email></Person></row>
<row>
<?nameStyle 0?>
<Person ID="7" />
181-555-0156<Person><Name><First>Dylan</First><Middle>A</Middle><Last>Miller</Last></Name><Email>[email protected]</Email></Person></row>
<row>
<?nameStyle 0?>
<Person ID="8" />
815-555-0138<Person><Name><First>Diane</First><Middle>L</Middle><Last>Margheim</Last></Name><Email>[email protected]</Email></Person></row>
<row>
<?nameStyle 0?>
<Person ID="9" />
185-555-0186<Person><Name><First>Gigi</First><Middle>N</Middle><Last>Matthew</Last></Name><Email>[email protected]</Email></Person></row>
<row>
<?nameStyle 0?>
<Person ID="10" />
330-555-2568<Person><Name><First>Michael</First><Last>Raheem</Last></Name><Email>[email protected]</Email></Person></row>
<row>
<?nameStyle 0?>
<Person ID="11" />
719-555-0181<Person><Name><First>Ovidiu</First><Middle>V</Middle><Last>Cracium</Last></Name><Email>[email protected]</Email></Person></row>
<row>
I feel this xml output is not like the regular xml output. Do you know why it is diffrent from the regular xml xml output? Please comment on this matter.
Thanks,
Scott Chang
What do you mean by regular xml document? Are you referring to fact that its missing a root element? if yes it can be added as below
USE AdventureWorks;
GO
SELECT
p.NameStyle AS "processing-instruction(nameStyle)",
p.BusinessEntityID AS "Person/@ID",
p.ModifiedDate AS "comment()",
pp.PhoneNumber AS "text()",
FirstName AS "Person/Name/First",
MiddleName AS "Person/Name/Middle",
LastName AS "Person/Name/Last",
EmailAddress AS "Person/Email"
FROM Person.Person p
INNER JOIN Person.EmailAddress e
ON p.BusinessEntityID = e.BusinessEntityID
INNER JOIN Person.PersonPhone pp
ON p.BusinessEntityID = pp.BusinessEntityID
FOR XML PATH('ElementName'),ROOT('RootName');
replace ElementName and RootName with whatever name you need to set for element as well as the root element
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

I am using Tiger, 10.4.11, and have an iPod classic 120gb working fine. Just got a 160gb classic and would like to sync it to same i-Tunes file. It said "must have iTunes 9.0 or later to sync." If upgrade i-Tunes to 9.0.2, will my 120gb iPod sync o.k?

I am using Tiger, 10.4.11 and have an iPod classic 120 gb working fine with about 7 gb of music on it. I just got another iPod classic 160 gb for my wife, and would like to sync it to the same iTunes file, but I got a message which says I must upgrade to iTunes 9.0 or later. If I upgrade to 9.0, will my 120 gb iPod be o.k. with that? Rumor: I have heard that iTunes 9.0 or later changes the format of the music.

Thanks to all for reviewing my question. I am trying to avoid a possible disaster here, having to load about 90 cd's all over again. If anyone knows, could you tell me what will happen if I download iTunes 9.0, and install it. Will it copy all of my music into it, or fail to recognize it, or recognize 8.0 and just upgrade rather than replace it? Thanks again. Tom

Can I use Tiger and Snow Leopard on my Mac Pro?

I have a 3 year old Mac Pro with 2 internal hard drives installed by Apple at the time of purchase. At present, I'm using Tiger 10.4.11. I've purchased Snow Leopard (The Family Pack with 5 licenses) and have installed it on my MacBook Pro.
I haven't put Snow Leopard on my Mac Pro since it is my main, workhorse computer and I have several older applications that aren't compatible with Snow Leopard.
My question is: Can I install Snow Leopard on my second internal drive and leave Tiger on the main drive? That way I could use either system by changing the start-up drive to the system I want to use. Is this possible, or advisable? Will it work or cause problems?
Another question: If one of the drives needs repair, could I boot up in the other drive and run Disk Utility to make the repairs instead of booting the computer from the original software CD? (I'm having a problem finding the original Tiger 10.4 System CD in my organizationally challenged graphic design and illustration studio.)
Thanks for any help anyone can offer.
Specs:
MacPro1,1
Dual-Core Intel Xeon (Intel)
2.66 GHz
Two hard drives each with two 512 MB RAM chips
Bay 1: Intel 232.89 GB drive
Bay 2: Intel 465.76 GB drive

Been hiding or not backing up and keeping bootable spares?
http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
http://www.bombich.com/software/ccc.html
http://www.google.com/search?q=clonemac+osx

Using Tiger 10.4.11 names disappear in System Preferences System Accounts

Similar Messages

Maybe you are looking for