Using Time Capsule to extend network

Hello: I have a Belkin N1 wireless modem router (ADSL) and have my Time Capsule connected the the modem via ethernet cable. I have the modem at the moment connected to my MacBook Pro via ethernet cable, and am able to connect to the Internet in that manner. My problem is that I cannot sem to extend my wireless network with my Time Capsule, which is what I want to do. Any advice or help? Thanks in advance.

I first tried connecting my new Time Capsule to my 2Wire gateway (DSL modem and router) via the ethernet cable to form a parallel network, but some incompatibility kept messing up the gateway's settings (resulting in losing Internet and phone altogether). I have since used the Time Capsule to extend the network via wireless only. This currently seems to work, although I have lost access to the Time Capsule on more than one occasion this afternoon for no apparent reason. I have not yet been successful in further extending the network using my Expresses -- which are used to connect ReplayTVs to the network.
Unfortunately, I cannot find a way to turn off the router function on the gateway (a previous DSL modem allowed me to do this -- most recently, I had my Extreme connected up via ethernet to the 2Wire gateway and forming a parallel network).
In case I need to replace the gateway to get this to work properly and in a stable fashion, does anyone know which AT&T DSL appropriate modems are most compatible with the Time Capsule?

Similar Messages

I have an Airport Extreme as my router and am using time capsule to extend the network in my new house. My ISP is only providing me 4-5 ip addresses and wants me to set up my router to issue out new ip addresses for all my devices.How do I fix this?Help

I have an Airport Extreme as my router and am using time capsule to extend the network in my new house. My ISP is only providing me 4-5 ip addresses and wants me to set up my router to issue out new ip addresses for all my devices.How do I fix this?Help.
They said I need to change my settings to NAT settings. I haven't been able to figure out or find anything. I have also spoken to Apple Support on the phone for hours without being able to figure out how to do this ( i don't think he knew much either lol.) Please help me because I've got about 15-20 devices in my house that require to be connected to the internet and this is just making things ridiculously slow and painful for me.
Thanks!

It is on DHCP & NAT under router mode yet my isp is still the one issuing ip addresses to my devices instead of the router issuing them

I was using time capsule to extend a network. now i want it to be the primary base station. how do i convert this?

i was using time capsule to extend a network. now i want it to be the primary base station. how do i convert this?

Thanks for the info. Since this is a cable modem, you will need to fully reset it so that it will associate correctly with the Time Capsule when it is reconnected.
I don't have the manual for your Ubee model handy, but most modems will reset if you power them down completely. That means pulling the power cord from the back of the device or unplugging from the wall. Leave the modem powered off at least 30 minutes...longer will not hurt a bit.
Next, perform a Factory Default Reset on the Time Capsule per this document:
Resetting an AirPort Base Station or Time Capsule FAQ
After the modem has been powered down and Time Capsule has been reset, connect an Ethernet cable from the modem to the WAN port (circle icon) on the Time Capsule.
Power up the modem and let it run for 2-3 minutes by itself
Then power up the Time Capsule and let it run a minute or two
Next, open AirPort Utility and configure the Time Capsule to "Create a wireless network". Let us know what operating system you are using on your Mac or PC if you have additional questions or need more details on this.

Using time capsule to extend a network with security

I have a time capsule and my roommate and I use the same wireless network. I want to add my time capsule to the network we both share but want to be sure only I will be able to access data on my time capsule i.e. external hard drive, back ups etc. Is this possible?

The Time Capsule can only extend a network wirelessly if it connects to the wireless signal from another Apple router.
So, the first question here would be whether or not the existing wireless network there is being provided by another Apple router.
If yes, what model of router would this be?
If no, then the Time Capsule will need to connect to the existing wireless router using a permanent, wired Ethernet cable connection.
If you do it this way, you have the option to have the Time Capsule produce a separate wireless network, or you can turn off the wireless on the Time Capsule and use it only as a wired hard drive.
No matter how the Time Capsule is set up, you would want to set up a separate Disk Password for the Time Capsule, so only those users who had the password could access the Time Capsule hard drive.

Problems using time capsule to extend wireless network

Hi all,
For some months I had to move to Germany for work (I'm from Italy, sorry for my English).
I am sharing internet with some other people, the wi-fi router is in their apartment, so basically I don't have access.
As the signal is strong enough only in one room I would like to use my time capsule to extend it also in the other rooms.
But when I try to extend it, my macbook pro connects to the network I would like to extend and the time capsule is not seen anymore.
To see the time capsule again in the airport utility i have to reset it to factory default.
Do you have any idea?
The wireless network is WPA2 protected, the provider is the German "Unity Media".

As the signal is strong enough only in one room I would like to use my time capsule to extend it also in the other rooms.
Apple's "extend" feature will only work if the Time Capsule is "extending" the wireless signal from another Apple wireless router. In other words, the "extend" feature is not compatible with wireless routers from other manufacturers.
You will need to connect the Time Capsule to the wireless router using a wired Ethernet connection. Connect from one of the LAN <-> ports on the wireless router to the WAN "O" port on the Time Capsule. Then, you can configure the Time Capsule to provide a separate wireless network for your use.

Using time capsule to extend a 2003 airport extreme

I have a 2003 airport extreme. I have a 2011Time Capsule. How can I use the Time Capsule to extend my range wirelessly?

Unfortunately, this is not possible, since the older AirPort Extreme does not have a setting to "extend a wireless network", which was added to the AirPort Extreme models in 2007.
It might be possible to have the older AirPort provide some additional wireless coverage if it can be permanently connected back to the Time Capsule using a wired Ethernet cable connection.

Can I use time capsule as a network drive?

I want to use the HD in my time capsule as a network drive in addition to backing up my macbook pro and imac desktop. I also have a couple of PCs anda yamaha tuner/amp on the network. Can this be done?

Click here and follow the instructions.
(66659)

Using Time Capsule with existing network?

I am planning on purchasing a Time Capsule, but would like to know if it's right for me before I buy it. Can someone please answer these questions I have about it;
What security do I have available on the Time Capsule to stop other people on the network accessing my backup, any attached devices and the settings of the Time Capsule?
If I plugged my Time Capsule into a network switch (switch is connected to the main router), will I then be able to attach ethernet devices to the Time Capsule without any speed loss for those devices?
I already have wifi but I would like to set up the Time Capsule with a different name and password (and leave the current wifi alone). If someone connected to the Time Capsule, can they access the devices which are connected to the original wifi, and the ones connected to the main router by ethernet?
Can I easily create a partition on my Time Capsule, so I can have 100GB of space available for copying/sharing files directly and then the rest for Time Machine backups?
Can iOS access the files or back up to the Time Capsule?
If I connected a printer to the Time Capsule, can iOS devices use it to print?
I know there's a lot of questions, but I'd appreciate any help with any of the questions.
Thanks.

What security do I have available on the Time Capsule to stop other people on the network accessing my backup, any attached devices and the settings of the Time Capsule?
There is a device password that will be required of any user who wants to access the Time Capsule disk. If the Time Capsule is also configured to provide a wireless network, users will need to enter the wireless network password to be able to connect to the network.
If I plugged my Time Capsule into a network switch (switch is connected to the main router), will I then be able to attach ethernet devices to the Time Capsule without any speed loss for those devices?
In this case, the Time Capsue would be configured to operate in Bridge Mode. It functions as another Ethernet switch in that type of setup. Speed should not be affected.
I already have wifi but I would like to set up the Time Capsule with a different name and password (and leave the current wifi alone). If someone connected to the Time Capsule, can they access the devices which are connected to the original wifi, and the ones connected to the main router by ethernet?
Yes, since the Time Capsule will be in Bridge Mode, devices that connect through the wireless on the Time Capsule will be on the same network as your main router...users connecting through the wireless on the Time Capsule and will be able to "see" other network devices.
Can I easily create a partition on my Time Capsule, so I can have 100GB of space available for copying/sharing files directly and then the rest for Time Machine backups?
No. In order to partition the Time Capsule drive, it would need to be removed from the Time Capsule case, placed in a separate caddy or enclosure and then connected directly to your Mac to allow Disk Utility access to the disk for the partition procedure. Then, you would have to reinstall the Time Capsule drive back in the Time Capsule case.
In addition to a lot of work, this will void the warranty on the product.
Can iOS access the files or back up to the Time Capsule?
iOS devices back up to iTunes on your computer. Then, when a Mac backs up to the Time Capsule using Time Machine, all of the data is backed up. In other words, iOS devices cannot back up directly to the Time Capsule drive using Time Machine.
Using an App like Filebrowser, it is possible to have the iOS device browse the contents of the Time Capsule drive, but the iOS device will not be able to open files that have been backed up using Time Machine.
The iOS device will likely open most other normal files stored on the Time Capsule drive if the proper App is installed on the iOS device.
If I connected a printer to the Time Capsule, can iOS devices use it to print?
Yes if the printer is AirPrint compatible. Check this Apple support document to see if your printer is on the list of compatible devices.
http://support.apple.com/kb/HT4356
Otherwise, you can add an App like Print Central to the iOS device to possibly allow printing from the iOS devices.

Using time capsule to extend the reach of my wireless network

I have a comcast router but wireless coverage only makes it halfway through my apartment. Bought a motorola router for front of apt, attached to cable and time capsule, but I'm not sure what to do next. Do I want to create a separate network or try to extend the comcast network? To make things more fun, my computer will only find the time capsule on one out of 20 scans, the other times nothing shows up. Thanks for any feedback/advice.

You need to use the airport utility on a computer.
If you use v6 utility it is fairly easy and straight forward.
The trick is to place the old TC in the same room as the new one.
Do a full factory reset and then you can just go through the utility to extend wireless network.
I did one post with all the pictures.
https://discussions.apple.com/message/24161378#24161378
If you have issues just ask.
Then you can place the old TC about half way between the new TC and the clients would want to connect.. the half way point is not distance but wireless signal levels.
You can pick that up by using the wireless diagnostics in a mac laptop and walking around to pick up the signals.
This is for extend wireless.. if you want roaming network it is entirely different. That means they are plugged together with ethernet.
Tell us if you mean roaming not wireless extend.

Using Time Capsule to extend a wireless network

I have an office in the top of my house (2nd floor roof conversion) and as a result the wireless signal from the ground floor is very weak. i would like to boost the signal using my Time Capsule, placing it on the 1st floor, shortening the distance the signal has to travel.
Is this possible? In the AirPort settings I can seen an option to 'extend a wireless network using an ethernet cable' but if that is the only option I may as well just move my wireless home hub to the 1st floor.
Can the network be extended wirelessly?
many thanks!

Thanks for the clarification.
Unfortunately, the "extend a wireless network" feature of the AirPort Express is only compatible with an Apple base station.
Therefore, you will not be able to use the TC to extend the wireless network that has been created by the BT Home Hub. You might check to see if BT offers an "extension device" or "remote" that would allow you to expand your wireless signal.
The TC will need to be configured to "Join" the wireless network that you have there.

Unusual Senario: Use Time Capsule to extend Airport Express network

I have an less common senaria here. I'd like to keep the TC on my desk and hide away the ugly cable modem. This is what I want to accomplish:
- Connect my airport express (802.11n model) to the cable modem and use it as the base station, in b/g/n mode.
- Wirelessly extend the above network to my TC.
- The TC will only be connected via ethernet and N equipped computer, so I want to run it in N (5GHz) only mode.
After some research, it seems to be not feasible, can anybody please confirm? Thanks for help.

If you are asking about extending using wireless only......Yes, if your existing network is being created by another Apple wireless router.
In this case, the Time Capsule would need to be located where it can receive a strong wireless signal in order to extend it correctly.

What's the best way to use Time Capsule through Extended Wireless Network?

I am operating four computers, three Apples and a PC. All the Apples use Snow Leopard. I have a large house where the cable company's modem and internet access is located downstairs at the far back of the house. That is where I have a 2Tb 802.11n Time Capsule (TC) connected to the modem by ethernet cable. My iMac is there, connected to the TC by ethernet cable. In the middle of the house, also downstairs, I have an Airport Extreme (802.11n) operating as a wireless bridge. Upstairs in the front of the house (very far from the TC and closer but not very close to the AE) I have a home office. That is where my other two Apples--a MacBook Pro and a MacBook Air--are usually located. The PC is located in a bedroom directly above the TC and wirelessly connects to it. At all locations, I get four radio signal strength bars. However, I am not sure that the AE is doing anything, because I get four bars regardless of whether the AE is plugged in, or not. When it is turned on, Airport Utility on all computers shows both the TC and the AE, but I have not been able to find which Airport ID I am actually connected to.
From my home office I do temporarily lose my internet connection from time to time each day, but the connection recovers usually within seconds. I assume this reflects occasional interference or other loss of wireless signal in the distant home office, although I do not see the radio bars diminish to less than the four bars.
All three Apples are set up to use the same TC for backup into Time Machine. However, I have been getting errors on the laptops operating in the home office (a long way from the TC and perhaps connecting directly over wireless or perhaps wirelessly through the AE bridge. Some messages are to the effect of being unable to backup, and others more recently report errors. I think that either due to connection interruptions or merely by suspending or turning off the computer while in the middle of backing up, errors in the Time Machine files were created. I have been unable to delete more than a few of the 8Mb sparsebundle bands so that I can completely get rid of one of the sparsebundles for the MacBook Pro. I was able to get rid of the other sparsebundle for that computer and also the sparsebundle for the MacBook Air. I am reluctant to erase the entire TC, because it has been working for the directly connected (by ethernet cable) iMac sitting right next to the TC.
So, I am wondering what is the experience of others who are trying to use TC successfully from computers located a long distance from the TC with either a direct wireless connection or a bridged wireless connection through an AE or other bridge.
And does anyone have good ideas about how to delete the sparsebundles effectively? I read the various questions and answers in the support community, but so far nothing that I have tried based on those messages seems to work. It seems that when all the Time Machines are set to "Off" and the sparsebundles are expanded to show the individual bands, we ought to be able to delete them fairly expeditiously. Sometimes, I can delete one band fairly quickly, but then the second band will hang forever. More often, I can't even delete the first band.

Thank you, Bob. I followed the procedure you stated. My AE is working. I did register its BSSID when I put my laptop next to it. This is also the BBSID I am getting when in my home office at the far end of the house from the TC. This means I am using the extended bridge AE when working and trying to use the automated backup feature in Time Machine. Do you think I should turn off Time Machine on these laptops when they are in the home office, and bring them into the room with the TC occasionally to have a better connection (wireless to TC or by connecting an ethernet cable) when trying to make Time Machine backups for them?
Interestingly (in contrast to the exact match of BBSID's for my AE), when I compared the BSSID for my TC in Airport Utility to the BBSID of the TC using the option key and the fan shaped Airport icon, the BBSID's matched except for the last two digits. In Airport Utility, they are 2F. In the fan shaped Airport icon they are 30.
Also, the AE signal, being centrally located on the first floor of the house, seems to be the one most in use. When I walked my laptop away from the AE all the way back to the TC, the laptop automatically switched over to the TC only once. Most of the time, the laptop is still connecting wirelessly with the AE. To switch back to the TC, I have to turn Airport off, and then turn it back on again.
I don't know how efficient or inefficient the Time Machine is when connecting to the TC indirectly through an AE bridge.

Time Capsule and extend network

Hello,
my connection between Time Capsule and router is nearly working, but not perfect. Router an Time Capsule are connect via WLAN. Setup an possition of the router can not be changed. The router is far away from my laptop , so there is a very poor connection. Thats why I wanted to extend the network. Extending with WDS is not possible because of the router configuration. I have choosen " extend network" in the Time Capsule setup, picked the network from the list and entered the key ( 128 bit WEP ). Time Capsule tells me it could not extend the network, although I can access the Time Capsule and have a working internet connection. I am accessing the Time Casule via Router and all wireless, so the router an Time Capsule have to be connected, somehow. Can someone help me to get this setup really working? Or is it possible to access the router via Time Capsule? Because the Time Capsule is close to my laptop an I would have ab better connection like this.

This is not the actual problem. The connection is working, but very slow, because the router ( with dd-wrt software on it ) is too far away. So i wanted the Time Capsule to support the network. Connecting router and Time Capsule with WDS is not possible, because the setup of the router hast to be NAT. There is a another option in the Time Capsule setup to extend a network without WDS, which I wanted to use. The Time Capsule connect to this network via WLAN ( otherwise I could not access it ) but it does not extend the existing network. This is problem with Time Capsule an router. I wanted to know what I have to change in setting so that the Time Capsule extends the network. Is there somthing special with password or IP adress ( at the moment it is set to DHCP ), .... ?

Problems using Time Capsule in mixed Network.

My NAS started to play up so I invested in an Apple Timecapsule as we have several Macs and the beast is supposed to support other OS's, including Linux and Windows.
Mac side words like a dream. Mr Apple's stuff generally does in my experience.
I can mount the disk in Linux (Ubuntu) but the operation is most odd. I can copy files from my Linux machine to the Time Capsule but not all types of file can be "seen" by my Mac. In particular, jpg files don't show up at the Mac end. They do show as being there to Linux.
I've not tried Windows yet, that gets minimal use here.
Has anyone mastered using a Timecapsule as a simple NAS under Linux and can offer some tips, please?
I've pretty well Googled this to death, there are conflicting versions of what are claimed to be working fstab entries (including the one I'm using) but no examples of what I am observing.
This is my fstab entry:
//<ip_address>/Data/Files /media/macnas cifs uid=brian,credentials=/home/brian/<credentials_file>,iocharset=utf8,sec=ntlm 0 0
The aim is to use the Time capsule as a back disk for my Linux machines as well as my Macs.
Any assistance greatly appreciated.
Brian
PS: Previously I was using on of my Linux systems as a Time capsule server for my Macs, that was easy to get working in comparison going the other way!

What Mac OS are you running?
There can be some interesting issues with Mavericks.. it might simply have permissions wrong.
Or the files are hidden.
See the commands in this thread might help.. since you seem to be a bit of Linux eggs spurt.
https://discussions.apple.com/thread/5766289?tstart=0
TC is really not suited to NAS duties. So good luck with backups on it.

Using Time Capsule on college network?

I have a large media library which I want to take with me to college next year. I am planning on buying a 2TB Time Capsule for the backups and storage space. I will not be able to be connected to the time capsule's 802.11n connection from anywhere except my dorm room, but is it possible to share (and definitely encrypt) the time capsule over the whole network so I can access it anywhere on campus? The time capsule itself will be connected to the campus's internet via ethernet cable. I'm unsure as to the port forwarding capabilities of the network. Would it just make more sense to leave the time capsule at home and share it over the internet?

Check what your College says..
Normally it will ban routers on the network. People who don't know what they are doing will connect it to LAN and supply dhcp back to the network. This is a receipe for disaster.
As well as wireless... just imagine wireless router in every room in a college. The wireless will be such a disaster. Every single room will compete for 3 available channels on 2.4ghz.
WAN access to the TC will depend on a huge number of factors.
Do you get a static ip address from the uni system?
Do you get access via standard ports.. what ports are blocked by the uni system?
Here things get really messy. If the uni gives you a private IP on their system.. then it is unlikely you can reach it anyway. And they are more than likely to block anything but a few standard ports to protect their system.
A big hard disk in the computer and a large external drive are probably going to get you a lot further than messing with the uni network.
Ask students who are there now.. during Open Day or whatever ask them what they do.
See if there is a computer club.. the geeks will know.

Using Time Capsule to extend network

Similar Messages

Maybe you are looking for