Using Time Capsule with existing wireless router

I am thinking about getting a TC, but I wanted to know if the following configuration would work:
DSL modem to existing wireless B router. Then have the TC recieve internet from the existing wireless router.
Basically I want to put the old router in the basement where the only wiring is, but put the TC upstairs on my desk so I can connect the printer to it.
Thanks!

Although, you can join an existing network using a Time Capsule as a wireless client, it’s recommended that the existing network is an 802.11n network.

Similar Messages

Setting up time capsule with existing wireless router and another time capsule

Hello,
I just bought my first mac (MBP) and a time capsule. We already have a wireless router, and my brother has an imac and his time capsule connected to it. The apple support people said that i couldn't use my new time capsule as a backup for my files because it would have to be in bridge mode and that would cause all sorts of problems and the backup would probably fail. That I would have to use my brother's time capsule to back up my files.
Is this true?? I find it hard to believe this issue hasn;t come up before.
Thanks,
Deborah

Thanks, Bob! If I may impose on you a little bit more, would you be able to guide me a little bit in terms of the setup?
Would I need to connect my time capsule directly to the router for first time set up?
If so, would I have to keep it connected to the router all the time after the first time set up, or can I keep it in another room?
Our wireless network was created back when we were a Windows household, so we still control it using Network Magic on an old laptop.
I unlocked the network (using Network Magic) when I tried to set up the Time Capsule (wirelessly, and before calling Apple), and after entering the network password my macbook recognized the TC and I got the good little green light on the TC. As soon as I locked up the network, I got the flashing amber light on the TC and airport utility couldn't find it anymore (using Airport utility version 6.1)... I unlocked the network again, the light turned green. I locked it back up, the light started flashing amber again...
Thanks, I really appreciate your help!
Deborah

Using Time Capsule with 2nd wireless router

Hi,
I have been trying to extend my time capsule and have had limited luck.
I have my time capsule in my office which is a separate building behind my house. The cable internet service runs to this location. I purchased an airport express and put that in the house so we would have wireless access in the house. I have tried every location available in the house and it is still really slow. (I get a transmit rate of 270 in the office. In the house it ranges from 7 to 20).
So, I was thinking maybe I could run a 30ft or so ethernet cable from the time capsule to another wireless n router in the house. So when out in the office I would connect to the TC and in the house to the Linksys (or whatever I buy). My question: would this even work? Can I have 2 wireless routers and would the Linksys work if it was connected via ethernet to the timecapsule vs. being connected directly to the cable modem?
Alternatively, can you connect 2 cable modems to one incoming cable line if I could find another cable modem somewhere?

Sure, happy to help.
Temporarily, move the Express close to your computer and connect an ethernet cable from your computer to the Express for the configuration.
Open Macintosh HD > Applications > Utilities > AirPort Utility
Select your AirPort Express and click Manual Setup
Click the Wireless tab below the row of icons
Wireless Mode...set to Create a wireless network
Wireless Network Name...Exact same name as your Time Capsule network
Radio Mode....802.11n (802.11b/g compatible) would be a good choice
Wireless Channel...Automatic
Wireless Security....Exact same setting as your Time Capsule network
Wireless Password....Exact same setting as your Time Capsule network
Wireless
Click the Internet icon
Look for the setting for Connection Sharing at the bottom of the page and set this to "Off (Bridge Mode)"
Click Update at the lower right of the window and close AirPort Utility immediately and disconnect the ethernet cable as soon as you see the message that your settings have been stored.
You can now move the Express to the location you need and connect the ethernet cable and power it up.

Can I use Time Capsule with Broadband wireless router that also feeds a PC?

I have just bought Time Capsule but am afraid to open it in case it stops the wireless broadband connection to my Mac and a PC in another room. Any advice?

There is no vpn built into the native firmware of N16 so I presume you are going to use third party.
Just plug in the TC and bridge it.. ie go to Internet tab of airport utility and select connection sharing off.
wireless then you will need to figure out.. you can setup roaming on 2.4ghz by using identical wireless name = ssid and security but lock both to different channels.. pick out of 1, 6, 11
In a PC network make sure you use the TC with a new name.. no spaces no special characters.. same with wireless. TC also restrict wireless on 2.4ghz to only 20mhz.. if you have the N16 set to 40mhz you will have to be extra careful with channels.. 40mhz will use up two channels and only one remains.. so your household will have filled the 2.4ghz.
Someone suggested you can turn off 2.4ghz in the TC by not naming it.. When I try that it kicks up an error that it has to be named. So perhaps someone else has a suggestion of how to turn off 2.4ghz.
You can turn off 5ghz by unchecking it. Seems mighty strange that you cannot turn off 2.4ghz but you can turn off 5ghz.

Using Time Capsule as a 'wireless' router and backup using Time Machine

I have a question about backup speed on my 1 TB Time Capsule. I purchased a Time Capsule about a year ago and have an imacg5 and two Mac laptops that I setup to use the wireless router capability and as the backup drive for all three computers.
I was experiencing a problem in that the backups from the imacg5 were never completing even though the Time Machine window said it was only backing up several MBs. In order to 'fix' the problem I finally 'erased' all of the backup files on the Time Capsule using Airport Utility. I had also run Disk Utility on all of the drives to verify and fix any problems.
When I initialized the wireless connections and initiated backups I connected to the imacg5 to the Time Capsule with an ethernet connection as well as via Airport and began 'backing up' my laptops, then started by backing up individually, various disks on my imacg5.
The laptops have rather small disks and backed up rather quickly. The imacg5 has hundreds of GB of data spread across several disks. I had decided to 'backup' the disks individually in case that had been the cause of my original problem.
My systems disk, Macintosh HD, backed up about 110 GB at the rate of 8 GBs per hour. I was encouraged.
My next 'data' disk, LaCie 320 #1, backed up about 209 GB at the rate of 2 GBs per hour. I was confused. This 'backup' took several days to complete. Once it completed, Time Machine has run about every hour as expected and completes the backup in about 3 minutes.
I still have two more disks on the imacg5 to backup. Does anyone have any idea what rate I should expect or should I just add the drives and let it take its course?

I say just do it!
When connected via ethernet I turn off the airport connection on the computer. I found that frequently my mom's macbook pro would choose the wireless connection to her Time Capsule rather than the ehternet connection to do the back up. This was slower than via the ethernet.

Using Time Capsule with existing network?

I am planning on purchasing a Time Capsule, but would like to know if it's right for me before I buy it. Can someone please answer these questions I have about it;
What security do I have available on the Time Capsule to stop other people on the network accessing my backup, any attached devices and the settings of the Time Capsule?
If I plugged my Time Capsule into a network switch (switch is connected to the main router), will I then be able to attach ethernet devices to the Time Capsule without any speed loss for those devices?
I already have wifi but I would like to set up the Time Capsule with a different name and password (and leave the current wifi alone). If someone connected to the Time Capsule, can they access the devices which are connected to the original wifi, and the ones connected to the main router by ethernet?
Can I easily create a partition on my Time Capsule, so I can have 100GB of space available for copying/sharing files directly and then the rest for Time Machine backups?
Can iOS access the files or back up to the Time Capsule?
If I connected a printer to the Time Capsule, can iOS devices use it to print?
I know there's a lot of questions, but I'd appreciate any help with any of the questions.
Thanks.

What security do I have available on the Time Capsule to stop other people on the network accessing my backup, any attached devices and the settings of the Time Capsule?
There is a device password that will be required of any user who wants to access the Time Capsule disk. If the Time Capsule is also configured to provide a wireless network, users will need to enter the wireless network password to be able to connect to the network.
If I plugged my Time Capsule into a network switch (switch is connected to the main router), will I then be able to attach ethernet devices to the Time Capsule without any speed loss for those devices?
In this case, the Time Capsue would be configured to operate in Bridge Mode. It functions as another Ethernet switch in that type of setup. Speed should not be affected.
I already have wifi but I would like to set up the Time Capsule with a different name and password (and leave the current wifi alone). If someone connected to the Time Capsule, can they access the devices which are connected to the original wifi, and the ones connected to the main router by ethernet?
Yes, since the Time Capsule will be in Bridge Mode, devices that connect through the wireless on the Time Capsule will be on the same network as your main router...users connecting through the wireless on the Time Capsule and will be able to "see" other network devices.
Can I easily create a partition on my Time Capsule, so I can have 100GB of space available for copying/sharing files directly and then the rest for Time Machine backups?
No. In order to partition the Time Capsule drive, it would need to be removed from the Time Capsule case, placed in a separate caddy or enclosure and then connected directly to your Mac to allow Disk Utility access to the disk for the partition procedure. Then, you would have to reinstall the Time Capsule drive back in the Time Capsule case.
In addition to a lot of work, this will void the warranty on the product.
Can iOS access the files or back up to the Time Capsule?
iOS devices back up to iTunes on your computer. Then, when a Mac backs up to the Time Capsule using Time Machine, all of the data is backed up. In other words, iOS devices cannot back up directly to the Time Capsule drive using Time Machine.
Using an App like Filebrowser, it is possible to have the iOS device browse the contents of the Time Capsule drive, but the iOS device will not be able to open files that have been backed up using Time Machine.
The iOS device will likely open most other normal files stored on the Time Capsule drive if the proper App is installed on the iOS device.
If I connected a printer to the Time Capsule, can iOS devices use it to print?
Yes if the printer is AirPrint compatible. Check this Apple support document to see if your printer is on the list of compatible devices.
http://support.apple.com/kb/HT4356
Otherwise, you can add an App like Print Central to the iOS device to possibly allow printing from the iOS devices.

How to connect time capsule to existing wireless router

Hi
I am struggling to set up my time capsule is it possible to connect it to my existing wireless router or does the time capsule have to replace it as I have tried to do that but I cannot get a connection or signal to the WAN port?
I have the set up instructions but its not helping I am a complete novice at this.
Any help or links much appreciated

Yes you can.
Just plug the TC into one of the Ethernet ports on your router. WAN port on the TC.
Before you do that, set the TC up to be in 'bridge mode' in AirPort Utility.

Use Time Capsule with Existing Router and WAP

We've added an existing TC to a new network installation where there is now a Cisco router and separate wireless AP and a new SIP phone system. How do I best setup or reconfigure the Time Capsule so our customer can still use it for wireless backup from their Apple notebooks?
We seem to be getting conflcts with the Time Capsule on the same subnet--capturing network and Internet ports!
Thanks!
Chet - Houston

Go to internet page.. on the top menu item you are offered, internet connection by ethernet or pppoe.. choose ethernet.. on the menu option below it, you determine how the TC will share the connection. Choose bridge.. done. When you do that the TC will make the WAN port available to LAN.
chetpro wrote:
Is it straightforward to put the TimeCapsule into bridge mode?
The only thing the customer needs to do is their 'backups' with this unit. We will add a separate WAP on the subnet. I assume the Time Capsule can still reside on the same subnet...
There are mixed PC, Apple notebooks, and printers, and a new SIP phone system on this LAN.
Does the TC also capture or reserve ports that we can exclude?
Thanks,
Chet.
Why not use the TC as a WAP.. you bridged it and now it is already a WAP.
The TC will not capture any port that I know of. It will exist happily in the same subnet, although as I mentioned if the Mac clients lose connection after a day or two, there may be an issue with arp timing out or some discovery protocol not working. Lion is maybe more suspectible at the moment. The problem is inconsistent so not sure yet.

Time capsule with Belkin wireless router

I have recently bought a Time Capsule (1TB) and have it set up with my existing Belkin router. This is a F5D9630-4 model which is only G+ MIMO so I've disabled the wireless capability on that and use the TC for wireless. At the moment the TC is in bridge mode allowing the Belkin to handle the DCHP stuff. Everything seems to work fine - I have a PC laptop and iPhone as well as the Mac and all communicate and connect to the internet with no problems.
However, I've just signed up for a MobileMe trial and hoped to try Back to My Mac. Unfortunately, I get a message saying it won't work because "Back to My Mac requires a router that supports NAT Port Mapping Protocol (NAT-PMP) or Universal Plug and Play (UPnP) in order to share services." What's strange is that both are enabled on my Belkin. Should I disable them and set up NAT on the TC or am I missing something else? Should it be the Belkin that is in bridge mode and the TC that handles the DCHP?
Anyone got any other ideas? I find it all very confusing having the two devices - if only apple did a TC with built in modem!

I have a similar set up and it works fine. Make sure your router is up to date and reboot it after enabling the UPNP option. I do get the green light at home with the similar setup.
At work, with the same exact setup, I don't get the green light, only the yellow one like you do. It does work anyway... so have you actually tried it from outside your network?

Using Time Capsule with Rogers Wireless Rocket Hub

Hello, I've moved to a rural area where the only internet service available is a high speed wireless (I'm using a Rogers Rocket hub). Previously I used my Time capsule for router/back ups but I now must use the router funtionality of the hub. Is there a way to still use the TC for daily backups (by wireless or Ethernet cable if necessary)? If it can be done, does backup traffic locally count towards my monthly bandwidth limit?

Does the rocket hub have ethernet port.. if it does then life is easy.. ?? If it doesn't then life just became very hard. The TC is really designed around using internet by ethernet connection.. and nothing else.
Just so you do know, it is possible to join a TC to a wireless network.. and still do backups to it.. but the speed will be super slow.. and will overload your wireless network for as long as backups are going.
Is there a way to still use the TC for daily backups (by wireless or Ethernet cable if necessary)? If it can be done, does backup traffic locally count towards my monthly bandwidth limit?
Backup traffic is still local LAN and does not count to your ISP usage.
The best way to do this is with ethernet to the client computer, if you cannot use ethernet to the main router.
Are you using a desktop or a laptop? Desktop is no problem.. but I would also have to add, that backups can be done to a USB drive that is faster and more reliable than using TC.
If you want to use laptop.. you have some nasty choices.
Slow backup with the TC connected by wireless to the main router.
Do backups and do internet as separate tasks.. swap over each night say to do a backup.
Or buy a USB wireless stick for your laptop.. these can be very small an unobtrusive now.. with a second wireless client in the computer you can do both internet and backup at the same time over different networks. If you go for this idea, tell me and I can give more instructions for the setup.

How do I use Time Capsule as a wireless router and turn my current one into modem only

I have a crappy modem/ router and before I purchase a new modem I want to use the modem (no wireless) feature of my router.
Question #1
How do I use my Time Capsule as a router?
Question #2
If I do this will I still be able to wirelessly back up to my Time Capsule?
Question #3
How do I turn off (wireless) or the router function of my modem/ router?
Question #4
I then want to connect all my wireless devices to my Time Capsule making that
the main WIFi in my house. I am assuming this is possible it is I just dont know how to go about doing this myslef without guidance, and the Airport Installer is confusing to me.
Thanks!

Question #1
How do I use my Time Capsule as a router?
Connect an Ethernet cable from one of the LAN <-> ports on your modem/router to the WAN port (circle of dots icon) on the Time Capsule.
Open AirPort Utility and click Continue to follow the guided setup to configure the Time Capsule to "create a wireless network". Select the "Bridge Mode" option when it appears during the setup. (AirPort Utility will normally do this for you)
Question #2
If I do this will I still be able to wirelessly back up to my Time Capsule?
Yes
Question #3
How do I turn off (wireless) or the router function of my modem/ router?
We prefer not to guess at things, but since we do not know the make and model number of your modem/router, and this is an Apple support area, we have little choice.
In general, you would enter the default IP address of the device into your browser to bring up the configuration pages (check your documentatio on the modem/router for this information, or it may be on the back or bottom of the device. An example of a default IP address is something like 192.168.1.254
There will be a wireless settings page that will allow you turn off the wireless function of the device.
If you acquired the modem/router from your service provider, they should be able to tell you how to do this as well, or if you check the manufacturer's website, they will likely have a support area for questions like this.
Question #4
I then want to connect all my wireless devices to my Time Capsule making that
the main WIFi in my house.
You will need to log on to the Time Capsule wireless network from each device and enter the password to connect. Most computers will "remember" the setting so that you do not have to enter the password each time that you connect.

Setting up a Time Capsule with Verizon Wireless Router

I am trying to set up my TC with a Verizon Wiresless Router. I wish to use the TC's wiresless signal and shut off the Verizon signal (can do). I plugged the TC via ethernet, into port 2 on the verizon router and in the WAN connection on the TC. I am getting a blinking amber light. No idea where to go, I cannot access the TC via my iMac and the ethernet port on the iMac doesn't work (broken since new!) Help much appreciated. I will want to use the TC to back up the iMac and two macbooks. THANK YOU!

Ok, I found the TC on the iMac after restarting the airport utility!

Using Time Capsule With Existing Airport Network

Hi All,
I already have an Airport connection and would like to setup TimeCapsule on that network. Do I need to plug in an ethernet cable? Will it conflict with my existing airport base station?
Thanks in advance,
Tim

Hi All,
I went through the setup on the Airport Utility but honestly I'm very confused as to how to set this up. It's being recognized by the Aiport utility but when I got to configure it, the airport utility says "Please make sure your Apple wireless device is plugged in and in range of your computer or connected via Ethernet and try again. (-6753)" I've connected it to my Ethernet port even though I thought I shouldn't have to and it still gives me this message. Thoughts?
Thanks in advance!!
Tim

How to use time capsule with Verizon wireless modem

What is best setup for TC and Verizon's Ultraline wireless modem. Thanks!

Bridge the TC..
I am assuming this is cable internet.. not wireless.
Just leave the Verizon doing what it is doing.. with the TC bridged you just plug it into the modem with ethernet.
To bridge the TC go to dhcp and NAT page for v6 utility.. or Internet tab for v5 utility and pick the connection sharing off bridge mode.

Can I use time capsule with a ASUS (RT-N16)router?

I will use a router with vpn. Can I use time capsule with it? And if yes, how do I connect them?

There is no vpn built into the native firmware of N16 so I presume you are going to use third party.
Just plug in the TC and bridge it.. ie go to Internet tab of airport utility and select connection sharing off.
wireless then you will need to figure out.. you can setup roaming on 2.4ghz by using identical wireless name = ssid and security but lock both to different channels.. pick out of 1, 6, 11
In a PC network make sure you use the TC with a new name.. no spaces no special characters.. same with wireless. TC also restrict wireless on 2.4ghz to only 20mhz.. if you have the N16 set to 40mhz you will have to be extra careful with channels.. 40mhz will use up two channels and only one remains.. so your household will have filled the 2.4ghz.
Someone suggested you can turn off 2.4ghz in the TC by not naming it.. When I try that it kicks up an error that it has to be named. So perhaps someone else has a suggestion of how to turn off 2.4ghz.
You can turn off 5ghz by unchecking it. Seems mighty strange that you cannot turn off 2.4ghz but you can turn off 5ghz.

Using Time Capsule with existing wireless router

Similar Messages

Maybe you are looking for