Using Time Capsule with NETGEAR FVS318v3 VPN router

Hi,
I have an ethernet network and I use the mentioned Netgear router. Now I have a Time Capsule 500 Giga, witch is connected via ethernet cable to the existing netgear network. I use it to backup my Macbook Pro and to surf in the internet with my Macbook.
All this worked perfectly till tonight. Now I am not able anymore surf in the internet. Why? I cannot remember how the settings where before. Can I disable DHCP server in the Time Capsule, so that it receives the IP from the Netgear Router?
Thank you for helping me.
Crilodan

Can I disable DHCP server in the Time Capsule, so that it receives the IP from the Netgear Router?
Configure the Time Capsule to act as a bridge (not sharing a single IP address). That disables the DHCP server.

Similar Messages

Can I use time capsule with a ASUS (RT-N16)router?

I will use a router with vpn. Can I use time capsule with it? And if yes, how do I connect them?

There is no vpn built into the native firmware of N16 so I presume you are going to use third party.
Just plug in the TC and bridge it.. ie go to Internet tab of airport utility and select connection sharing off.
wireless then you will need to figure out.. you can setup roaming on 2.4ghz by using identical wireless name = ssid and security but lock both to different channels.. pick out of 1, 6, 11
In a PC network make sure you use the TC with a new name.. no spaces no special characters.. same with wireless. TC also restrict wireless on 2.4ghz to only 20mhz.. if you have the N16 set to 40mhz you will have to be extra careful with channels.. 40mhz will use up two channels and only one remains.. so your household will have filled the 2.4ghz.
Someone suggested you can turn off 2.4ghz in the TC by not naming it.. When I try that it kicks up an error that it has to be named. So perhaps someone else has a suggestion of how to turn off 2.4ghz.
You can turn off 5ghz by unchecking it. Seems mighty strange that you cannot turn off 2.4ghz but you can turn off 5ghz.

Can i use time capsule with iphone

can i use time capsule with iphone and ipad and how can i access my data at anywhre using time capsule

TC is not designed for ipad or iphone or any iOS device.
You should use them with cloud if you want remote access to your data do it via cloud.. you cannot easily get remote access to the TC from iOS device.

Can I use time capsule with MiFi?

1. Just bought time capsule. I am an RV'er and use a Verizon MiFi to connect to the internet. Can I use Time Capsule with Verizon MiFi?
2. Can I use Time capsule as a "hard Wired" stand alone system using ethernet cables?

Check out these previous posts on this subject
https://discussions.apple.com/message/19329590#19329590
https://discussions.apple.com/message/20811831#20811831
https://discussions.apple.com/message/20321031#20321031

I was just wondering if I can use time capsule with my iphone for both back up and to access the hard drive on the capsule?

I was just wondering if I can use time capsule with my iphone for both back up and to access the hard drive on the capsule?

I don't think backup is supported but you may be able to access the TC's internal drive, from the iPhone, with an application like: NetPortal
Note: I haven't actually tried this app, so if someone else has and was successful in accessing the TC's drive they can certainly chime in.
Follow-up. Just downloaded and installed this app ... and I can now verify that it, indeed, can access both my TC's internal and externally attached USB HDD.

Can I use time capsule with a USB cellular modem?

Can I use time capsule with a USB cellular modem?

No, since the USB port on the Time Capsule will only support a compatible printer and/or hard drive.

Can I connect and use Time Capsule with two printers?

Can I connect and use Time Capsule with two printers?

Sure, if the printers connect using the Ethernet port, you have 3 ports on the Time Capsule.
If the printers connect using wireless only, the Time Capsule will support up to 50 connections.
If your printers connect using USB, then you will need a powered USB hub. Something like this, for example:
Dynex 4Port USB 2.0 Hub DX-THUB16 - Best Buy

Can you use Time Capsule with any wifi extender?

Can you use Time capsule with any wifi extenders?

No, since Apple designed their routers to only work with other Apple routers.
I suppose that it is possible that another brand might work, but since you won't know this until you try, it would be a good idea to have a clear understanding of the store's return policy before you decide to gamble.

Using time capsule with separate router

Hi
at the moment I have a Macbook Pro and get online through a 1TB Time Capsule connected to an old router with a printer connected into the back of the Time Capsule to print wirelessly.
If I switch broadband providers and get a new modem/router would I be able to use the new wireless router as the main internet hub (in a different room) whilst still connecting wirelessly to the time capsule to back up only (essentially using the time capsule as a wireless backup device only rather than an internet router)?
And, if I were to do this could I still print wirelessly?
thanks

You cannot use two different wireless connections at the same time.. that means you have to use either internet or time capsule.. it would be better to hook up the TC to the network in bridge so you can still access it whilst doing internet at the same time. So the best way is run ethernet between the two routers.. but if you cannot do that, then EOP adapters have become very popular and will generally work better than wireless bridging. Unfortunately the options for wireless bridging with non-Apple routers are poor.

Using Time Capsule with 2nd wireless router

Hi,
I have been trying to extend my time capsule and have had limited luck.
I have my time capsule in my office which is a separate building behind my house. The cable internet service runs to this location. I purchased an airport express and put that in the house so we would have wireless access in the house. I have tried every location available in the house and it is still really slow. (I get a transmit rate of 270 in the office. In the house it ranges from 7 to 20).
So, I was thinking maybe I could run a 30ft or so ethernet cable from the time capsule to another wireless n router in the house. So when out in the office I would connect to the TC and in the house to the Linksys (or whatever I buy). My question: would this even work? Can I have 2 wireless routers and would the Linksys work if it was connected via ethernet to the timecapsule vs. being connected directly to the cable modem?
Alternatively, can you connect 2 cable modems to one incoming cable line if I could find another cable modem somewhere?

Sure, happy to help.
Temporarily, move the Express close to your computer and connect an ethernet cable from your computer to the Express for the configuration.
Open Macintosh HD > Applications > Utilities > AirPort Utility
Select your AirPort Express and click Manual Setup
Click the Wireless tab below the row of icons
Wireless Mode...set to Create a wireless network
Wireless Network Name...Exact same name as your Time Capsule network
Radio Mode....802.11n (802.11b/g compatible) would be a good choice
Wireless Channel...Automatic
Wireless Security....Exact same setting as your Time Capsule network
Wireless Password....Exact same setting as your Time Capsule network
Wireless
Click the Internet icon
Look for the setting for Connection Sharing at the bottom of the page and set this to "Off (Bridge Mode)"
Click Update at the lower right of the window and close AirPort Utility immediately and disconnect the ethernet cable as soon as you see the message that your settings have been stored.
You can now move the Express to the location you need and connect the ethernet cable and power it up.

How to setup apple time capsule with FIOSinternet and VZ router?)

Hello,
I have Apple time capsule and the VZ Router MI424WR. I current set up:
1. VZ router - wireless off, the rest is standard
2. Time capsule: Wireless on in Bridge mode
Result: Internet works but the wireless network is very in-stable. Airtunes is nearly not usable.
I searched in the Internet and there was several comments that is is not a good combination. Therefore it is recommended to convert the VZ router in a modem mode and use only the Time capsule as the router. I tried this several times I do not get it to work. I followed this procedure (http://data.agaric.com/node/2160) but then I need the PPPoE Account number and password. But there do I get this? The Verizon support was not really helpful.
Please, is there a good and complete description to solve that issue?
Thanks in advance
Moebius

Go back to your first setup ...
Verizon router with wireless turned off
Apple Time Casule with wireless turned on
Method 1:
With the Time Capsule in "Bridge Mode", if I remember correctly, you should connect the WAN port to one of the open ports on the Verizon router (I believe bridge mode also turns off the DHCP server on the Time Capsule, if not, find that and turn if off as well).   Change the addressing mode for the Time Capsule to "static" and assign it an address on the LAN which is not in use (choose something you know is out of the way but on the LAN -- I suggest 192.168.1.180 to start -- you can change it once you get everything working).
If it doesn't work this way for you, move the cable from the WAN port on the Time Capsule to Port 1 and try again.
Method 2:
This results in a router behind a router setup, but unless you have devices connected directly to the Verizon router, it shouldn't be a problem.
With the Time Capsule disconnected from the Verizon router, turn on "Connection Sharing" (not bridge mode) and make sure DHCP is enabled on the Time Capsule. You need to change the address range being used by the Time Capsule (which I think defaults to 192.168.1.x to another network -- I suggest, 192.168.2.x with a netmask of 255.255.255.0 and give the router an address of 192.168.2.1 on the LAN side. Now, connection the WAN port to one of the Verizon router LAN ports. If you had anything connected to the Verizon LAN ports, move those over to the LAN ports on the Time Capsule and reboot them.
Method 3:
This is the least desirable of the scenarios because it relies on Verizon's crappy radio in their router (the Time Capsule has a much better radio and support 802.11n as well as b and g) whereas Verizon's only support b/g.    Go back to the configuration for Method 1, but also turn OFF wireless on the Time Capsule and turn on wireless on the Verizon router.   Try both bridge scenarios described -- using the WAN port first and if that didn't work, then moving the connection to port 1.
There is no scenario where you can place the Verizon router behind the Time Capsule -- since I believe Verizon is using all MoCA connections for the WAN side of their connection (you'd have to get Verizon to convert you to ethernet WAN and then they would not support you most likely for any STB issues with your FiOS if the Time Capsule was between the ONT and their router ... so don't even bother wasting time there ... more headaches than it would be worth.
If you're still not sure exactly what each configuration screen on the time capsule should say, post some screen snaps (or the configuration settings/choices which you are unsure about and someone will likely know the answer here).

Using Time Capsule with Vista 64bit Sony Vaio laptop

Thinking about upgrading my router as well as having a large storage capacity for my photos, videos and music I bought a 2 TB Time capsule.
It is working extremely well as a highspeed router but I don't know how to send files from my laptop to the Time Capsule...
Is it possible to sync Apple TV with Time Capsule ?
Is it possible to use Time Capsule to back up, store files from Vista based computer ?
Is it possible to synchronize my iTunes library on my Time Capsule ?

See my response to a similar issue - not sure if it applies 100% to your situation...
http://discussions.apple.com/thread.jspa?messageID=7116986#7116986

Using Time Capsule with existing network?

I am planning on purchasing a Time Capsule, but would like to know if it's right for me before I buy it. Can someone please answer these questions I have about it;
What security do I have available on the Time Capsule to stop other people on the network accessing my backup, any attached devices and the settings of the Time Capsule?
If I plugged my Time Capsule into a network switch (switch is connected to the main router), will I then be able to attach ethernet devices to the Time Capsule without any speed loss for those devices?
I already have wifi but I would like to set up the Time Capsule with a different name and password (and leave the current wifi alone). If someone connected to the Time Capsule, can they access the devices which are connected to the original wifi, and the ones connected to the main router by ethernet?
Can I easily create a partition on my Time Capsule, so I can have 100GB of space available for copying/sharing files directly and then the rest for Time Machine backups?
Can iOS access the files or back up to the Time Capsule?
If I connected a printer to the Time Capsule, can iOS devices use it to print?
I know there's a lot of questions, but I'd appreciate any help with any of the questions.
Thanks.

What security do I have available on the Time Capsule to stop other people on the network accessing my backup, any attached devices and the settings of the Time Capsule?
There is a device password that will be required of any user who wants to access the Time Capsule disk. If the Time Capsule is also configured to provide a wireless network, users will need to enter the wireless network password to be able to connect to the network.
If I plugged my Time Capsule into a network switch (switch is connected to the main router), will I then be able to attach ethernet devices to the Time Capsule without any speed loss for those devices?
In this case, the Time Capsue would be configured to operate in Bridge Mode. It functions as another Ethernet switch in that type of setup. Speed should not be affected.
I already have wifi but I would like to set up the Time Capsule with a different name and password (and leave the current wifi alone). If someone connected to the Time Capsule, can they access the devices which are connected to the original wifi, and the ones connected to the main router by ethernet?
Yes, since the Time Capsule will be in Bridge Mode, devices that connect through the wireless on the Time Capsule will be on the same network as your main router...users connecting through the wireless on the Time Capsule and will be able to "see" other network devices.
Can I easily create a partition on my Time Capsule, so I can have 100GB of space available for copying/sharing files directly and then the rest for Time Machine backups?
No. In order to partition the Time Capsule drive, it would need to be removed from the Time Capsule case, placed in a separate caddy or enclosure and then connected directly to your Mac to allow Disk Utility access to the disk for the partition procedure. Then, you would have to reinstall the Time Capsule drive back in the Time Capsule case.
In addition to a lot of work, this will void the warranty on the product.
Can iOS access the files or back up to the Time Capsule?
iOS devices back up to iTunes on your computer. Then, when a Mac backs up to the Time Capsule using Time Machine, all of the data is backed up. In other words, iOS devices cannot back up directly to the Time Capsule drive using Time Machine.
Using an App like Filebrowser, it is possible to have the iOS device browse the contents of the Time Capsule drive, but the iOS device will not be able to open files that have been backed up using Time Machine.
The iOS device will likely open most other normal files stored on the Time Capsule drive if the proper App is installed on the iOS device.
If I connected a printer to the Time Capsule, can iOS devices use it to print?
Yes if the printer is AirPrint compatible. Check this Apple support document to see if your printer is on the list of compatible devices.
http://support.apple.com/kb/HT4356
Otherwise, you can add an App like Print Central to the iOS device to possibly allow printing from the iOS devices.

Using Time Capsule with Linksys WPS54GU2 print server

Just curious if anyone else has had issues with using the Time Capsule with the above print server. I have been pulling my hair out trying to get this to work with WEP encryption turned on (WEP or no encryption is all the Linksys supports). Before I upgraded to the Time Capsule, I was using a 40-bit encryption key and everything was fine. It appears that you can only use 128-bit encryption on WEP with the Time Capsule, so I had to change keys. I haven't been able to ping the print server unless it's wired or encryption is turned off.
On top of this, I've also tried to run the old router with 128-bit WEP using the same key, and that doesn't work either, so it would seem to point to the print server as the culprit. I'm running the latest firmware on both devices.

Did you ever get this to work? I've got a similar Print Server and its WPS54G. PS was working wireless and now after adding the Time Capsule it no longer does.

Can I use Time Capsule and keep my Telstra router for connection to the internet?

Can I use Time Capsule without changing, to keep my Telstra router for conection to the internet?

You can either bridge the TG or the TC.
For the TC.. I explained it in the previous post.. and it is posted again and again and again.
For the TG782T.. open it directly from a pc.. select configuration wizard and choose bridge.. it is as easy as that.
Then setup pppoe client for the TC with your Telstra username and passwork.
Post again in Whirlpool forum if you have issues.
Either dsl hardware or bigpond.

Using Time Capsule with NETGEAR FVS318v3 VPN router

Similar Messages

Maybe you are looking for