Using Time Machine on a network disk getting 'backup disk not available'

I just installed SL on a brand new MBP. on my last MBP I used to backup to a network volume and htis worked fine (also under SL), and my other MBP is also still backing up fine. however I am unable to get it to work on the new one.
Tried to connect the HD to the MBP and make a backup direct, than move the HD to the server in the network and try to connect, TM refuses to backup to the mounted disk.
I followed these instructions with the same result.
http://www.lone-gunman.be/2009/06/22/time-machine-network-drive/
any tips ideas or tricks?
thanks.

Pondini wrote:
What are you backing-up to?
A FW HD connected connected to my MM server hanging in my network
The link in your first post is talking about making TM back up to an unsupported NAS device, but you also mention connecting it "directly" to your Mac, as if it's an external USB or FireWire HD.
Yes to test, I connected the HD direct to my MBP and it did a Backup. Some forums suggest doing this if you can not make a BU over a network to start with. Than connect it in the network and select it as the TM BU, and it works. However, not in my case.
If it is a NAS, especially an unsupported one, it seems to be some sort of problem with the programming on it, or the procedure to connect to it. You'll likely do better contacting the maker.
As said I think the HD is fine, other machines back up to it since ± 18 months with no problems. It must be a setup problem or the likes.
Also be aware that if you have to use that "unsupported devices" Terminal command, you may not be able to do a full system restore from that device. The only way to do one is to boot from your OSX Install disc, and use the installer utility on it, but since you can't apply that command there, it may not recognize your backups.
Worked fine in the past. Did test this in the beginning.

Similar Messages

  • TS1550 My time capsule will not back up. There is a time machine error message that states "The backup disk image "/volumes/Backup/Jane's MacBook Pro.sparsebundle" is already in use. How do I correct this problem?

    My time machine will not back up. I get a Time Machine Error message that reads: "The backup disk image "/Volumes/Backup/(myname)'sMacBook Pro.sparsebundle" is already in use.
    I have not been able to back up for two weeks, I think this occurred after an update to the operating system, but I am unsure.
    How do I correct this problem?

    Have you tried restarting the computer? Also, see Time Machine Error from this pages sidebar under More Like This.

  • Every time I try to back up my Macbook Pro with an external hard drive using Time Machine, I receive the error of "the disk does not have enough space". I have a 500GB hard drive and only 120GB Macbook. It worked fine before the latest Maverick's

    Every time I try to back up my Macbook Pro with an external hard drive using Time Machine, I receive the error of "the disk does not have enough space". I have a 500GB external hard drive and only 120GB Macbook. It worked fine before the latest Maverick's update. Any help would be greatly appreciated.

    My guess would be it has created an entirely new backup of your drive when you upgraded to Mavericks.
    See Here: http://pondini.org/TM/1.html
    And here: http://pondini.org/TM/9.html
    Peruse the whole site. There is a lot of information there.

  • Can you use time machine on a networked hard drive

    Can you use time machine on a networked hard drive? 

    See if this helps: Using Time Machine with a networked hard drive

  • Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2

    Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2. I've erased and reformatted the drive; reconnected Time Machine(it saw it) and began a new backup. The backup starts again but fails before completing with backup drive not found error. I used the 10.7.2 combo update. Any help on how to fix this problem would be appreciated.

    Arghhhhhhhhhhhhhhhhhhh!!!!!!
    After waiting since October for a fix, I have now upgraded the firmware on the Time Capsule and installed the new Airport Utility, released yesterday, and the situation is even worse.
    Up until now, the Airport Utility had an option to disconnect all drives manually and the Time Capsule would then work until the next reboot – a temporary (?) work-around.
    Now that option does not exist in the new-look Airport Utility. And the Airport Utility installation can’t be rolled back and the old utility won’t restore.
    The sparesbundle is still not accessible. Anyone worked out a work-around in the new environment yet?
    I have another Time Machine backup working fine to a trusty old Lacie Drive so erased the one on my Time Capsule to see if that works. I have renamed the Capsule and the Time Capsule Drive.  But to build another full backup will take at least two days and I shall be away from tomorrow and am reluctant to leave the Capsule and computer up and running for a week. And I’ll bet the sparsbundle will still be nowhere to be found.
    How can Apple screw up so badly when they are to become the richest company in the entire world and – soon – will have more cash in the bank than the entire United States? Can’t they afford someone who really can sort this out? Especially when a Firewire connected hard drive – my trusty and simple LaCie – works fine.
    Words, almost, fail me.

  • Is it possible to reinstall Mac OS X Lion on MacBook and then use Time Machine to restore to the previous backup I made before reinstalling Mac OS X Lion?

    Is it possible to reinstall Mac OS X Lion on MacBook and then use Time Machine to restore to the previous backup I made before reinstalling Mac OS X Lion?

    My MacBook was not normally booting up. It would turn on, make the Apple startup noise, and the bottom loading bar would progress just a little bit, then my MacBook would shut down. I tried rebooting it many times and the same thing would happen, it would just shut down. Then, I read that I can reset the PRAM (by holding Option+Command+P+R after the Apple startup noise comes). That worked, but now I get a screen that asks me to choose one of the 4 options (see:  http://images.macworld.com/images/article/2012/07/lionrecoveryutilities-289404.j pg). I choose Restore From Time Machine Backup, but it progresses to 17.6% and gets stuck there forever. I tried doing it again, and it got stuck at 17.6% again. That is why I am asking if I should just reinstall Lion, then restore a previous backup on the fresh new Lion?

  • Can I view photos and movies from my external hard drive? I used Time Machine and a WD Passport for backup. Since my drive on my MacBook Pro is filling up I was planning to delete some of the movies and photos.

    Can I view photos and movies from my external hard drive? I used Time Machine and a WD Passport for backup. Since my drive on my MacBook Pro is filling up I was planning to delete some of the movies and photos. I wanted to see if I could view them from the hard drive. Thanks

    Hello, eco1. 
    Thank you for visiting Apple Support Communities. 
    This sounds like you are wanting to move your iTunes media folder to an external drive and have iTunes this folder from this location.  If this is the case then I would recommend taking a look at the article below. 
    iTunes for Mac: Moving your iTunes Media folder
    http://support.apple.com/kb/ht1449
    Cheers,
    Jason H. 

  • Can I use Time Machine with a Network Storage Drive?

    I just picked up this drive http://eshop.macsales.com/item/Macally/NSA2S350NAS/ and I would like to use Time Machine for backups, and also use a different location on the drive for sharing files on our network. But this article http://docs.info.apple.com/article.html?path=Mac/10.6/en/15139.html says that network server must use AFP. How do I set that up? I just have a simple network using a 4 port wireless router. I have no idea what protocol the network is. I just use the "Network" option to connect to my new drive at smb://192.168.1.105.
    Is this going to be possible or do I need to buy some other backup software???

    On a Mac G4 I'm running OSX leopard with Time Machine. I have my other Mac (8600)networked. The 8600 was upgraded with a G3 Sonnet and IDE card, so it'll support OSX and large hard drives. I want TM to back up to the 8600, is this possible?
    Thanks

  • Time Machine won't restore a critical backup - disk space not sufficient error

    Using Time Machine Restore Backup says my Macintosh HD has 55 GB available. I need to restore a 50GB Time Machine Backup from an external disk to the Macintosh HD device as the transfer destination of the restore copy it it gives me a message 'This Disk does not have enough space to restore your system'. In fact trying to restore all my many time backups over the past months give the same error even though the backup size is less then my Macintosh HD destination.
    So I used the Time Machine software to delete many of my documents in the backup that I want to restore, now it is 30 GB through the Time machine finder, but restoring still gives me the same error. However, time machine made a new backup of my system today of 30 GB but when I go through the backup process using this, there is no error about there not being enough space.
    It seems although the finder in Time Machine recognises that file is just 30 GB, in the restore process it doesn't recognise that file has been reduced to 30GB

    If you're trying to add a large amount of data all at once, and you get an alert of insufficient space, then from the menu bar, select
     ▹ System Preferences... ▹ Time Machine
    If the padlock icon is closed, click it to unlock the settings and authenticate. Turn Time Machine OFF, then back ON and close the preference pane. Restart the computer. Test.

  • Time Machine no longer can find my backup disk

    Since the OSX 10.6.6 upgrade, I am unable to do a Time Machine backup on my MacBook Pro. It is on a network with my iMac which is connected via FireWire to my Drobo. I have never had a problem before with Time Machine being able to find the Sparsebundle that Time Machine sets up on a network connected drive. Now it gives me the message, "The identity of the backup disk has changed.". I tried deleting the Sparsebundle and then letting Time Machine start over. That worked, but the next rime it attempted to backup, I got the same error message.
    I would appreciate any help.
    Thanks -
    Dudley Warner

    Alton Christensen wrote:
    - external drive on Airport Extreme
    Sorry to have to tell you this, but backing-up that way is "iffy" and +*not supported by Apple.+* See [Using Time Machine with an Airport Extreme Air Disk|http://web.me.com/pondini/Time_Machine/Airport.html] (or use the link in *User Tips* at the top of this forum).
    A "full reset" of Time Machine may fix the current problem. See #A4 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum).
    Longer-term, though, you really should find a better way to back up. See #2 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum).

  • I want to use time machine on a network drive

    i know in the past Apple holds us hostage to buy their time capsule.  With Lion now launched, is there a work around to allow families to buy there own hard drive and use it for multiple macs for time machine?
    Im fairly new to Mac, convinced my wife to switch, now here we are held captive to buy a TC when we already have a fantastic 2TB drive we purchased for a fraction of the price of a TC.  I dont care about wifi, I just want to save our Mini time machine to our MBP networked drive (or vice versa).
    I currently have Lion on the MBP, and Leopard on the Mini.  After installing and hating Lion on my MBP, i have not "upgraded" the mini.  (although I am currently following the "upgrade back to Leopard" threads)
    Thanks for any help or ideas.

    In the past Apple was not holding you hostage by requiring you to use a Time Capsule for network Time Machine backups. Search on Google for Time machine NAS OS X (or something like that) You will find a number of drives that were working with SL.
    Now, they did change the file protocol in Lion, so some of the NAS servers won't work with Lion, at the moment. So long as it is a decent company that makes the NAS they should be releasing a firmware update to get their NAS working with Lion.
    One of the companies that put out a press release was Western Digital. They said they would be working on an updated firmware so that you could use it as a Time Machine drive.
    Just look around the interwebs and I am sure you will find several that will work.

  • Using Time Machine with a network Drive

    I recently bought a WD My Book Live network drive to use as my Time Machine backup. I was previously using a USB external HD for Time Machine with no problems. I have set up the new network drive but when I go in to Time Machine to select it as the drive to back up to, it is not showing up. The only drive I see is my old USB external HD. I have the latest firmware for the network drive and I am running Mac OSX10.5.8. Any suggestions?

    If you bought the WD in a USB enclosure it probably came formatted with NTFS (Windows). Time Machine can't use NTFS drives or SMB (Windows) network shares as a backup destination because that format does not allow the proper permissions to be set. If this is the case with your drive, open Disk Utility and reformat your new drive (NOT you system drive!!) with HFS+ aka 'Mac OS Extended (Journaled)' and then the drive should show up as a target selection in Time Machine.

  • Using Time Machine with a Network Attached Storage (NAS) device

    I have a Mac household (20" iMac, MacBook Pro and MacBook) all connecting to the internet, wireless printer and a Network Attached Storage (NAS) device via the "n" version AirPort Extreme.
    All software / firmware is up-to-date on all machines / devices.
    Everything works great through the AirPort, but I can't see the NAS in the Time Machine setup. How do I get Time Machine to make backups of each of my machines to the NAS?

    TM backups to NAS are not officially supported. There are some hacks to make it work but you'll be on your own if you use them. check out this [Mac os x hint|http://www.macosxhints.com/article.php?story=20080420211034137&query=time% 2Bmachine%2Bafp]. make sure you read all the caveats and comments.

  • HT201250 I use time machine and I can't get a certain backup to allow restore

    My MBPro stopped booting up. I got it up and running again after reinstalling everything(OSX and all). I am now running Mountain Lion, could this be causing problems seeing all the non Mountain Lion era backups. I can only restore those dates now, no older than upgrade date ones.
    I hooked up my time machine drive and now I can't get a certain date to make itself available for "Restore" the latest date that lights up that button in Time Machine is the date I did the reinstall. How do I get my excel files I made back onto my computer.
    Other issue is where are Excel files kept in the MAC's file structure. I know the were backed up, but I can't see them when I am using Finder to look within each subfolder in Time Machine.

    Welcome to the Apple Support Communities
    When you turn on the new iMac for the first time, Setup Assistant will ask you to restore a backup, so connect the external disk and follow steps to restore all your files to your new iMac. Your new Mac will have the same settings and programs as your old computer.
    In other cases, I would recommend to restore the whole backup without using Migration Assistant or Setup Assistant, but a Late 2012 iMac uses a special OS X build, so the OS X version that you're using on your old Mac won't work on the new one. For more information, see > http://pondini.org/OSX/Home.html

  • Can't use time machine with a network drive anymore

    I am not able to use my network drive any longer now that I loaded Lion OS. Does anyone have have a work around. I tried the sharing of a folder trick that I had for snow lepard. I have a HP media smart server and 2TB of storage available it seems like a big waste not to be able to backup to a safe place.
    Al

    Here is one from Pondini, who was the foremost Time Machine expert in the world.
    http://pondini.org/TM/Airport.html
    And another from Apple. Info near the bottom.
    AirPort base stations: About USB disks
    And another miscellaneous from Apple:
    AirPort base stations: Time Machine hard drive compatibility

Maybe you are looking for

  • Help needed in AP Check Printing R12 XML Tags

    Hi, I have taken the standard template and am trying to customize the template for the requirement. I have also generated the XML file. I have to restrict the no of invoices to 17 and if only one invoice is there other 16 blanks should print. if I am

  • Extreme music software on vista

    Hi all. I have recently upgraded to vista 32 and with that have installed all the latest vista drivers for my xfi extreme music card. The problem is when using creative mediasource 5 v5.20.23 none of the buttons below the playback controls work (Audi

  • MSGestureHold not working in Windows Phone 8.1 webbrowser control

    Scroll down and try sample no. 1 on the following website: Unifying touch and mouse The hold gesture sample will work with Internet Explorer 11 in WP8.1 but not with the webbrowser control in an app in WP8.1. There seem to be a bug. It worked fine in

  • Microsoft Guidelines for SCCM Proof of Concept

    Where can I find the Microsoft Guidelines for Microsoft Proof of Concept for SCCM 2012 R2. Some of the point I remember are as follows: POC should be done in Lab and not in production. POC not to be include any specific customization. At times custom

  • Plz help  im trying to submittin my pod cast but it iznt workin

    PLZ help i made a url and rss feed for my pod show (http://itpc://rss.mac.com/kacoliketaco/iWeb/Kacosklub/KacoKast/rss.xml) and it sayswe had diffuculty reading this feed. bad http result code:502 when i tested it it worked fine but when i try to sub