Using TKPROF help

Hi All
when using TKPROF if we do not specify table=schema.table name and the plan_table exists in m98_v32 then would the explain plan be generated in m98_v32.plan_table as in example below
tkprof metxprd1_ora_12463.trc metxprd1_ora_12463.lst sys=no explain=M98_V32/saturn5gg
regards
kedar

You can try and let us know the result. Why asking instead of trying?

Similar Messages

  • PXE across subnets using IP Helper Address

    For 10 years I have been trying to get my network engineers to add an IP Helper address of our SCCM PXE Server in order to provide an Enterprise PXE service for our campus (Large University). And every year they keep telling me
    they won’t do it due to security concerns. I’m not exactly sure what they mean or what they are afraid of but I am looking for others who have been in this same situation and have been able to accomplish what has been a never ending exercise in futility for
    me. I am looking for a white paper or a case study that I can use to help build my case and hope that someday I can convince our engineers that the world won't come to an end by adding IP Helper addresses.

    .. they won’t do it due to security concerns. I’m not exactly sure what they mean or what they are afraid of..
    You need to get to the bottom of their specific concerns....
    PXE involves the use of TFTP (to download the NBP + boot.sdi + boot.wim).
    TFTP is neither robust/resilient nor particularly secure.
    But I'm guessing that the concern must surely be more related to the payload/content (i.e. what is within the boot image itself) that might be the worry?
    The boot image (potentially) contains licensed products (not directly a security concern), and certificates, accounts, passwords, scripts ?
    If you have the F8 debug feature enabled in your boot image, it could be used to "live boot" a computer, access the filesystem on that computer, and basically provide uncontrolled access to the files/documents/data on that computer (assuming that your computers
    are not using any form of disk encryption).
    For this last reason, F8-debug should not remain enabled for "normal" operation.
    In our organisation, we mitigate that risk with disk encryption. We also don't distribute boot media nor full media - PXE is the only way we deploy OS (well, outside of the datacentre, that is).
    Our networking team were initially concerned about PXE - but not from the security aspect, more from the capacity/bandwidth perspective. So we worked with them to plan/design/place the boot servers, and the DP's placement.
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • XSLT Mapping : RFC Lookup using java helper class

    Hi All,
    I am doing RFC Lookup in xslt mapping using java helper class. I have found blog for the same (http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/05a3d62e-0a01-0010-14bc-adc8efd4ee14) However this blog is very advanced.
    Can anybody help me with step by step approach for the same?
    My basic questions are not answered in the blog as:
    1) where to add the jar file of the java class used in xslt mapping.
    I have added zip file of XSLT mapping in imported archived and using that in mapping.
    Thanks in advace.
    Regards,
    Rohan

    Hi,
    Can u please have look at this in detail , u can easily point out yourself the problem...
    http://help.sap.com/saphelp_nw04/helpdata/en/55/7ef3003fc411d6b1f700508b5d5211/content.htm
    Please observe the line,
    xmlns:javamap="java:com.company.group.MappingClass
    in XSLT mapping..
    The packagename of class and class name and XSLT namespace should be matching...
    Babu
    Edited by: hlbabu123 on Sep 29, 2010 6:04 PM

  • "500 internal server error" when trying to use F4 help in the variable sele

    Hi Experts,
    I am getting "500 internal server error" when trying to use F4 help in the variable selection screen (in WAD).
    How could this be resolved?
    Quick reply would be very helpfull.
    Thanks in advance !!

    It seems you are using wrong client ID. Make sure your logon pad has right details. You should verify this with your basis team.
    If the problem persists then try re-installing. But before you do that you can execute sapbexc.xla which is in the c:\program files\sap\bw. Type c:\ in cell c3 and click "start button". Any red flag means you have wrong version dll/ocx on your local drive, in that case you should reinstall with right patches.
    if this solution helps u then pls assign points

  • When I try to use online help in CC, I'm told CC isn't connected to the internet, but it is.

    When I try to use online help in CC, I get a message that says Photoshop isn't connected to the internet. But I am connected.

    Did you use CS5 or CS6 in the past? Did you set those apps to use offline help only so that you didn't have to watch Adobe Air update itself every time you tried to open Help? If so, there might be an old Adobe Help (CS5 / CS6) preference lingering on your machine. You wouldn't think CC would respect it, but you would be wrong. I had to install old Adobe Help (for CS5 / CS6) and change the pref.
    I downloaded the outmoded Adobe Help app by way of: http://www.adobe.com/support/chc/?helpcfg=http://help.adobe.com/HelpCfg/en_US/Dreamweaver. helpcfg&url=http://helpx.adobe.com/en/dreamweaver/topics.html&product=dreamweaver

  • Using ip-helper without using DHCP functionality

    Hello,
    I am fairly new to Cisco, and am after a bit of help.
    My scenario:
    We have a new domain setup on a new VLAN (3), seperate from our current infrastructure VLAN (2).
    The new domain controllers provide DHCP for our new servers, and I would also like them to handle DHCP for wireless clients.
    We have one DHCP scope 10.0.0.0 255.255.0.0, and I would like to assign all wireless clients an IP in the 10.0.6.0 range.
    My thinking on the best way to do this, is with a DHCP policy, that looks at the relay agent information.
    I would then set the ip-helper address, on the port the wireless access point is connected to on the Cisco, to point to the DHCP server.
    Then for that same port, I would seb a subscriber id in the relay agent information, and use this string to set the IP assigned to that device.
    Looking into doing this, it seems the Ciscos DHCP functionality has to be turned on in order to use ip-helper.
    In my config, I cannot tell if DHCP is enabled or not, I can see neither "service dhcp", nor "no service dhcp" in the config.
    Assuming I were to turn it on using "service dhcp", can I then leave the actual functionality turned off? i.e. turn on the DHCP service, but not have it assign IP addresses?
    Also, does turning it on cause any downtime or disruption?
    I think I have to run these commands:
    conf t
    service dhcp
    interface GigabitEthernet2/40
    Ip helper-address 10.0.0.1
    Ip dhcp relay information option-insert
    Ip dhcp relay information option subscriber-id “wireless”
    I know these are probably simple questions, so please forgive my ignorance.
    James

    Ok here goes.
    On my domain controller/DHCP server, I have a scope setup of 10.0.0.0 255.255.0.0, and is set with an IP range of 10.0.0.1 - 10.0.6.253
    I have various reservations in place, and a working policy to assign thin clients an IP of 10.0.2.X based on their MAC address.
    I have then created a second policy, that should be assigning IPs in the 10.0.6.0 range, based on relay agent information, subscriber ID. This is a HEX value, so whatever string I enter on the Cisco, has to be converted to HEX.
    This DHCP server is on the same VLAN 3. The VLAN interface on the Cisco has IP of 10.0.0.254 255.255.0.0
    The wireless clients are getting IP addresses, but not within the range specified by the policy, so they are getting any address between 10.0.0.1 and 10.0.6.253 that is not already in use.
    Image 1 shows the vlan interface, where I have set the helper address, relay information option-insert, and subscriber id of "wireless".
    Image 2 shows the config on the port that my access point is connected to.
    Image 3 shows the value of the policy on the DHCP server, based on subscriber ID
    Image 4 shows the string "wireless" converted to HEX
    Image 5 shows the IP range that the policy should be using
    Image 6 shows "Edss-iPhone" as have an IP not within the correct range
    Hopefully that helps.

  • How to display the master TOC when using Context help in a merged document

    I use Robohelp 10. I have created a large Merged Webhelp project and I have set out the project master with nothing in it other than merged projects place markers.
    This is the layout of the generated projects etc.
    Generate
              Master.htm
                   Redirect.htm  (Home page is a redirect to Project 1 Home Page - not in TOC)
    mergedProjects
              Project1
                  Home Page.htm
              Project2
                   Redirect.htm  (Home page is a redirect to Project 1 Home Page - not in TOC)
              Project3 etc.
                    Redirect.htm  (Home page is a redirect to Project 1 Home Page - not in TOC)
    I can get the help to work great when I call up the master page, which shows the TOC for the whole project and the default home page. And from the breadcrumb the home link goes to the home page and shows the Main TOC
    However when I call a page using context help ID I get a single frame with the selected page. The link to show the TOC shows the TOC but it is the top of the merged project and not the master TOC. The home link in the does display the home page but again the displayed TOC is the one of the current merged project.
    The question is :
    How can I get the Master TOC to show all the time regardless of what page I call using a context ID or how can I create a link that will take me back to the Master TOC?
    I remember when I created a previous help file for chm output I had to modify all the ali files in order for the redirect to work throught the master chm. Surely this is not the case with webhelp?
    TonyC

    I am sorry that I didn't get back to all you guys that took to answering my very promptly. Unfortunately I was not in a position to answer to the suggestions made. as I was away from my computer which had Robohelp on.
    Anyway, I did try a couple of scripts mentioned, but didn't really have any success i achieving what I need to do.
    I set up a redirect which redirected to the main home page. I tried setting the home page in a  main sub-project - so the redirect when from any sub project
    Generate
         Master-project.htm (Home Page = Help_Welcome.htm)
    merged Projects
    SubProject1
                [Home Page =  home_redirect.htm (a redirect see below) ]
         SubProject 2
                [Home Page =  home_redirect.htm (a redirect see below) ]
         SubProject 3
                [Home Page =  home_redirect.htm (a redirect see below) ]
    home_redirect.htm  (a redirect use by sub-topics)
    <!--
       window.location="../../ Help_Welcome.htm ";
    //-->
    //]]></script>
    This setup works fine as long as I call the master page. The TOC is as I would want. However if I call an ID from my application I get the required page to display and I can get the TOC to show. The problem is that the TOC is from the current sub-project and not the master project as I would want.

  • Files needed to be present to use HTML help and Web help

    For using RoboHelp for word generated .hlp files, we kept
    .hlp and .cnt files in the production environment for the users.
    Now, we are planning to migrate to Robohelp for HTML help and
    gradually to WebHelp.
    In that case what are the files that are required to be
    present in the production environment?

    With HTML Help all you need to ship are the CHM files. That
    is because these are compiled files that contain all the essential
    ingredients to see and use the help. The only exception to this
    rule is if you are using a glossary or browse sequences. In this
    instance you'll need to ensure all your users have the
    HHACTIVEX.DLL file installed on their PC. If they don't they won't
    be able to see them. You cab get the install routine for your
    application to install and register this file.
    With regards to Webhelp, you'll need to publise all the files
    generated by the compile. Part of the compile process is setting up
    the location of the published files (e.g. Intranet, FTP). You don't
    have to worry about what to publish. As long as you have your
    location correctly defined all the files are copied there.

  • How to use Search help PRCTR_EMPTY in Web dynrpo ABAP

    Hi,
    I have a requirement to use search help PRCTR_EMPTY as F4 help for an InputField in my application. But, in the F4 help, if I select "Profit Center Via Standard heirarchy" and search, it is giving me the following error:
    "Sending of dynpro SAPLSPO4 0300 not possible: No window system type specified"
    Here the search help is trying to call a R/3 screen from web dynpro.
    Pelase suggest me if there is any other way to use this search help in web dynpro.
    Thanks,
    Manogna

    hello,
    Any search help where R/3 screen is called, will not work in WD ABAP environment. You can create search help using OVS and follow the similar way of data selection as in search help.
    Regards
    Vishal kapoor

  • How to use search help in ECC6.0 reports without matchcode.

    How to use search help in ECC6.0 reports without matchcode.
    Select-options: O_SHIP FOR KUNWE MATCHCODE OBJECT DEBI  is in 4.6c.

    we can use on value request for that.
    report zrich_0001 .
    tables: t001.
    data: begin of it001 occurs 0,
    bukrs type t001-bukrs,
    butxt type t001-butxt,
    ort01 type t001-ort01,
    land1 type t001-land1,
    end of it001.
    select-options s_bukrs for t001-bukrs.
    initialization.
    select bukrs butxt ort01 land1 into table it001 from t001.
    at selection-screen on value-request for s_bukrs-low.
    call function 'F4IF_INT_TABLE_VALUE_REQUEST'
    exporting
    retfield = 'BUKRS'
    dynprofield = 'S_BUKRS'
    dynpprog = sy-cprog
    dynpnr = sy-dynnr
    value_org = 'S'
    tables
    value_tab = it001.
    start-of-selection.
    refer to this thread:
    On value request?

  • How to use search help in layout of se51

    how to use search help in layout of se51.

    Hi,
      One of the important features of screens is that they can provide users with lists of possible entries for a field. There are three techniques that you can use to create and display input help:
    Definition in the ABAP Dictionary
    In the ABAP Dictionary, you can link search helps to fields. When you create screen fields with reference to ABAP Dictionary fields, the corresponding search helps are then automatically available. If a field has no search help, the ABAP Dictionary still offers the contents of a check table, the fixed values of the underlying domain, or static calendar or clock help.
    Definition on a screen
    You can use the input checks of the screen flow logic, or link search helps from the ABAP Dictionary to individual screen fields.
    Definition in dialog modules
    You can call ABAP dialog modules in the POV event of the screen flow logic and program your own input help.
    These three techniques are listed in order of ascending priority. If you use more than one technique at the same time, the POV module calls override any definition on the screen, which, in turn, overrides the link from the ABAP Dictionary.
    However, the order of preference for these techniques should be the order listed above. You should, wherever possible, use a search help from the ABAP Dictionary, and only use dialog modules when there is really no alternative. In particular, you should consider using a search help exit to enhance a search help before writing your own dialog modules.
    Input help from ABAP dictoinary
    http://help.sap.com/saphelp_47x200/helpdata/en/9f/dbaa5435c111d1829f0000e829fbfe/content.htm
    Field Help on the Screen
    http://help.sap.com/saphelp_47x200/helpdata/en/9f/dbaa6135c111d1829f0000e829fbfe/content.htm
    Field Help in Dialog Modules.
    http://help.sap.com/saphelp_47x200/helpdata/en/9f/dbaac935c111d1829f0000e829fbfe/content.htm
    Regards,
    Vara

  • Is there any practical reason to use DB helper class?

    Is there any practical reason to use database helper class ( e.g. database.bookDB in Duke's bookstore)in servlet design? What if I setup a DB connection for every servlet?

    to ken_robinson
    I am currently setup DataSurece in servlet init().Usually (I know WebLogic is this way), if you configure the DataSource through the app server's configuration app, it is available to all applications.
    The most efficient way to look up the DataSource in a particular app is have a ServletContextListener lookup the DataSource from JNDI and set it in the Context as an Attribute. Each servlet would then, in it's init() method, get the DataSource from the ServletContext (faster than using JNDI for each Servlet. The ServletContextListener requires the container you are running in support the 2.3 spec. If it does not, simply use a startup servlet (servlet that is loaded when the app is loaded) and do the same thing.

  • Powerpoint presentation I have stored in icloud until recently were syncing to Keynote on my iPad with no problem.  Now when I open Keynote on my iPad there is nothing.  I could use some help with this problem.

    powerpoint presentation I have stored in icloud until recently were syncing to Keynote on my iPad with no problem.  Now when I open Keynote on my iPad there is nothing.  I could use some help with this problem.

    Morning AndreD86,
    Thanks for using Apple Support Communities.
    These articles explain exactly what is backed up by using their method.
    iTunes: About iOS backups
    http://support.apple.com/kb/ht4946
    and
    iCloud: Backup and restore overview
    http://support.apple.com/kb/ht4859
    Also we want to double-click the Home button and swipe the Task Bar to the right.
    Then make sure the button on the far left of Task Bar is not muted.
    Best of luck,
    Mario

  • HT201210 I was downloading IOS to my ipad 2 and now my ipad is stuck and cannot be used. HELP?

    I was downloading IOS 6.1 to my ipad and now my ipad is stuck and cannot be used. HELP.
    It shows on the screen that it is plugged into itunes.
    How do I get my ipad working again?
    How can I download IOS 6.1 succesfully?
    Thanks

    Double tap the home button and find the mail app. Drag the app up from the multitasking display to close the app. Then reboot the iPad and try again.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • I went to icoke.ca and entered my pin to get a free song, but when I went to itunes to redeem it, its says that my code has already been used. Help!

    I went to icoke.ca and entered my pin to get a free song, but when I went to itunes to redeem it, its says that my code has already been used. Help!

    It wont even accept my icoke pins! when I enter them (and there are two on the inside of the cap) it says its an invalid pin..  Other places online says this offer expired March 31, but on the bottle cap it says 12/31/2011  so I dont understand,.  Why do you offer a free itune when one cant access it?

Maybe you are looking for