Using too much processor to render

This is really upsetting me I just got a new motherboard asus M5a99xevo used for gaming so it should be pretty good New Gtx 2gb 560 Video card put in 16 gig ddr3 ram 13 gig dedicated to premiere and when I did a practice render its maxing out my quad core.
http://www.screencast.com/users/PatFale/folders/Default/media/ea249a54-f192-458c-9c49-fe38 bd455130 see link This really ticks me off - After spending $500 to make my computer run more effeciently with premiere pro It still Sucks Using windows 7
HELP!!!!!!!

As the others have said, it is normal in some circumstances for the CPU to do a lot (or most of or even all of) the work. It depends on what you're doing.
Here's an article that goes into details about what Premiere Pro does on the GPU:
http://blogs.adobe.com/premiereprotraining/2011/02/cuda-mercury-playback-engine-and-adobe- premiere-pro.html
Here's a video that talks about CPU usage:
http://www.video2brain.com/en/videos-5355.htm

Similar Messages

Process Using too much Processor

Hi all !
I have a real wierd request.
I have a process which runs for about a hour converting files. The process only between 10 and 15MB of memory which is fine. The problem is that the process uses basically all the processing power available on the server. My administrator is worried that if another process is started whie mine is running it will not receive a share of the processor . Even though I have told him (and showed him) that the java app releases some of the processor when another program requests it.
Is there anyway of specifying the percentage of processor a java app uses ? For example I would like to tell the app to only use 50% of the available processor !
Robin

How computationally intensive is the conversion? Are they small files that require sophisticated processing? Or are they large files that are processed in a simple way?
I'm asking because it's very unusual for a process that does significant I/O to peg the CPU. The fact that it does may point to a bug in the code.

Firefox uses too much ram

My FIrefox has been using too much RAM as of late. I have followed all the steps in the firefox support page about checking for possible plugins that may or may not be using too much RAM, but after starting firefox in safe mode, there really wasn't much of a difference. Maybe like 5k kb less, but it's still not enough to account for the 1.7million kb that firefox ends up using with one tab open.
I like to leave my pc on for a bit, and sometimes I'll leave firefox running with a tab open while I'm using other applications, but even if i restart my firefox, the RAM usage does not decrease. After closing all applications and leaving only firefox running, it appears to be around 1.5million kb. Only if i restart my whole pc does the RAM usage drop back to normal levels, and then it ramps back up after a period of time.
I would like to get this resolved soon, or at least figure out the cause of this.
http://puu.sh/9ihMr/585bac7192.png
http://puu.sh/9ihPx/4a9da78104.png
My system has:
2x2GB DDR3 Kingston memory modules
Radeon HD5850 with 1 GB of RAM
AMD Phenom II X4 955 processor 3.20GHz
Windows 7 Professional, SP 1 64-bit OS

Start your Computer in safe mode with networking. See if there
is still a problem.
It could be the work of one of your add-ons, or even add / mal-ware.
Look thru your add-ons list and make sure you know what each one is
there for. Also, check the programs that are on your computer
'''Windows > Start > Control Panel > Uninstall Programs.'''
'''Mac: Open the "Applications" folder'''
Go thru the list and use a web search to check any that you don't
know what they are.
'''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-caused-malware Troubleshoot Firefox Issues Caused By Malware]''''' {web link}

MacBook Pro using too much RAM

I have 15" MacBook Pro, purchased in February, 2013. It has 2.6 Ghz Intel i7 processor, 8 GB RAM and a 750 GB hard drive. The HD is about 25% filled, mostly with photos. It came with Mountain Lion, I upgraded to Mavericks, then to Yosemite. I go back and forth between Safari and Chrome for my browser. (I've heard Chrome uses too much memory, but I've found the opposite to be the case for my computer.) All upgrades went smoothly, no problems. I love using it, EXCEPT...
Over the past year, I've thought it was using too much RAM for very simple activities and it slows to a crawl using Aperture or MS Word. Even when just web browsing, and nothing else open or running, the computer will use 6 to 7 gigs of available RAM. Using Aperture is so slow it's no longer fun... I wait and wait for the beach ball to go away and it does, eventually (Won't need to worry about Aperture for too much longer, I guess). I've been thinking about Lightroom to replace Aperture, but I'm worried that I will have similar problems with a new program. Any suggested solutions? Thanks!

Hey danfrompeoria,
Thanks for the question. If I understand correctly, you are using a lot of memory. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
OS X Yosemite: If your Mac runs slowly
Thanks for using Apple Support Communities.
Have a great day,
Mario

New flash update use too much Cpu

with the old flash, my machine only use between 10-20% on Google chrome. Now with the new flash it 40-60% and it use too much memory as well (old new)
broswer: Google Chrome 18.0.1025.142
flash:11.2.202.228
system: windows 7
processor: pentium dual core E5400
Ram: 4GB/ 3.25 usable.

Could you open a new bug report on this at bugbase.adobe.com? Please include steps to reproduce, specific url, dxdiag report, and your observations between 11.1 and 11.2.
Thanks,
Chris

To upload photos from my pc onto my ipad using a usb stick. I bought a camera connector kit and tried placing the usb stick onto one of the white square adaptors, stuck it into the ipad2 and I got 'the device uses too much power'' message. Pls help.

I am not very familiar with the ipad2. I wished to transfer some photos from my pc (not an apple pc but that is the only one I have) to my ipad2 as I thought it would be easier to cull them, edit, crop etc to create albums for our recent trip (the photos are already on the pc and no longer on the camera memory card). When I place the usb stick on the adaptor and stick it onto the Ipad2 I keep getting 'device uses too much power/ requires too much power' message. I read somewhere on the internet that a usb hub could be used to solve the issue but that did not work either. What am I doing wrong? Is there actually a way around this problem. If not why does apple sell this product for Ipad users at all?
Thank you for any help/ solution you can offer.
Regards

I'd ask that on the iPad forum.
https://discussions.apple.com/community/ipad

On my MacBook Pro with Retina Display, Why does the "USB Devices Disabled Unplug the device using too much power to re-enable USB devices" keep coming up after I unplugged the usb device?

On my MacBook Pro with Retina Display 15", that I purchased a few weeks ago, started coming up with the following message on my desktop:
"USB Devices Disabled Unplug the device using too much power to re-enable USB devices".
I unplugged the device and the message still keeps coming up.
This is what I have done so far to troubleshoot:
I shut down the laptop. When booting up I pressed the command+option+p+r at the same time. It comes up with a menu to reinstall OSX, Get help online, Run Disk Utility, etc. I choose the disk utility and repair the disk and then restarted.
The message keeps popping up and I can't seem to get rid of it. Why does the message keep popping up even though I don't have any devices hooked up to the laptop at all? Any help to reenable my usb ports and get rid of the messaage would be helpful.

I talked to Apple Support and we at least stopped the bleeding, a little bit. These are the troubleshooting steps I did before I contacted Apple Support:
1. Reinstalled OSX
2. Restore the last known good Time Machine Backup.
This did not fix my issue, so I called Apple Support and they told me this:
1. Turn Power off.
2. Wait 15 seconds.
3. Plug in Magsafe adapter.
4. Wait 15 seconds.
5. Hold down the Shift+Option+Power Button for 20-30 seconds.
6. Turn Power back on.
Ok, this stopped the bleeding a little, but as soon as I plugged in a Apple USB Superdrive
and a Apple Mini Displayport to VGA Adapter. This "USB Devices Disabled" pop-up pops up like every 30 minutes now. At least, it is not constantly popping up after I close it, so I guess it will do for the temporary. Going to contact Apple support, later, though to see what else can be done.

Lacie "using too much power", USB disabled, can't access ext HD?

Last night, moving items to my Ext HD, i got an error message about the USB "using too much power" and then it disabled it.
I'm using a 15'' 2006 Macbook with 10.6.7 operating system.
I've googled the issue and have run out of ideas.
The Ext HD is a 500GB LaCie Little Disk New Pack USB2.0 Black
Restarted the macbook.
Booted the macbook into safe mode.
I've tried plugging something else into both my USB ports (it detected the item, a camera card reader) and was usable.
When I plug in my Lacie Ext HD now using its usb cord, the blue light on the Lacie flashes as if its detectable/inuse but there's nothing in my Mac menus showing access to it.
HELP ?
Error Message:
Because a USB device was drawing too much power from your computer, one or more of your usb devices have been disabled.
To prevent damaging your computer, the USB device drawing too much power has been disabled. Other devices may have also been disabled. When you disconnect the device drawing too much power, your other USB devices will be enabled again.

Maybe the disk will work through a separately powered USB Hub?
Bob

Apple mobile device service uses too much cpu time

Apple mobile device service uses too much cpu time, from 88% to 99% of the CPU time.

The best way to fix this is to completely remove all aspects of iTunes then reinstall. Step by step directions are on this article. Good luck
http://support.apple.com/kb/HT1925?viewlocale=en_US

Why does my Macbook pro said "unplug the device using too much power to re-enable USB devices" when i plug in my iphone's charger to connect my phone with the mac?

my iphone 5's charger is not working anymore with the mac or the normal plug in neither, i dont know why. whenever i plug in my mac, i have to twist the charger a little and my mac said "USB Devices Disabled: Unplug the device using too much power to re-enable USB devices". of course it cant connect with the itunes in my mac, but somehow it still syncs the music to my iphone... i don't understand why. please help me thanks!

try resetting the ipad,or change the cable ,it woould work

I can no longer charge my iPhone5 through either of my macbook pros. I get the error message that a USB device is using too much power. Can anyone help?

I can no longer charge my iPhone5 through either of my macbook pros. I get the error message that a USB device is using too much power. Can anyone help?

I reconnected the original powered hub that I thought probably caused the problem and this time it shut down the whole computer. When I rebooted everything now works perfectly. The system reset. I tried another powered hub and it didn't have the same effect so the old one is heading for the bin and with fingers crossed all systems are now working perfectly. Trying to reset PRAM or reset the SMC didn't work but causing the same power issue did. Thanks for your input though. It did get me to think what was the original cause.
Cheers
Guy

I can no longer download photos to my ipad with the camera attachment. the message says thats its using too much power. i have a 100% charge and i used it before and it worked fine.

I can no longer upload photos with the camera attachment. I am getting an error saying the device uses too much power. I have used the device before. Is there anything that can be done to fix this problem?

You don't actually say what the problem is, but maybe this can help:
USB and Firewire information:
http://support.apple.com/kb/HT1151?viewlocale=en_US
http://support.apple.com/kb/HT4049?viewlocale=en_US

OIM 11g using too much memory and not releasing it when shutting down

Hello,
we have a problem with OIM 11g using too much memory (about 5gb) and it's not releasing it at shutdown (4gb still used).
We are using a VM with RedHat Linux 5.6. Originally we had 4gb RAM + 2gb swap file. We installed Admin Server, OAM, OIM and SOA on that machine but quickly realised we couldn't run all 4 programs at once in 6gb. AdminServer could run with 2 other products, but it was a tight fit in memory.
So we increased the RAM to 8gb (still 2gb swap file). But then our problem occured : I start the Admin Server (2.7gb total memory used), then OAM (4.6gb total memory used) and then OIM. After it started the server is now using 9.6gb of memory (~300mb of free memory) ! The problem gets even better : after I shut down everything (OIM, OAM, admin server) the "top" command show that there is still 4gb of memory used even tho nothing else is running on the server ! There is absolutely no other process (other than root stuff) running and no other users connected to the machine. After a reboot, it shows 400mb of memory used. I tried restarting the programs and it did the same thing.
Our intuition is that there might be a memory leak or some bug in OIM that might use up almost all the free memory and it's not releasing it upon shutdown. It might have been there before we increased the memory but have not noticed it since memory was already tight.
Anyone encountered the same problem ? Any idea ? Any suggestion to narrow down the problem ?
Thank you

You can adjust the memory settings for WLS by editing the setSOADomainEnv.sh file that can be found in your /middleware/user_projects/domains/<domain>/bin/ folder. There is an argument called PORT_MEM_ARGS which is used to set your Java memory arguments. This way you can decrease/increase the amount of memory used by each managed server.
I usually type "ps -ef | grep oracle" to see what processes are running by the oracle user. This way the output doesn't get cluttered with root processes.
Sunny Tsang

HT4101 When connecting my camera to my IPad mini via lightniing to usb camera adapter,I get "The attached accessory uses too much power" .Any solutions?

When I connect my Ipad mini to my camera via lightning to usb camera adapter all i get is a message "The attached accessory uses too much power."Any solutions

It depends on the camera, but some have a special mode for offloading photos but not trying to charge the camera through the USB port. For others, you may have to pull out the SD card (if that's what it uses) and use the Lightning to SD card reader instead.
Maybe if you told us what camera you are connecting, somebody here with the same model can give you more specific information.

I made an extra backup on a USB device and now I can't get it back because "the device uses too much power". Why didn't it a few weeks ago and how can I use the device anyway?

because "it uses too much power"
I did'nt get that message a few weeks ago when I used Snow Leopard and now I can't approach the files I saved on the external disk.
Question 1: How do I solve the problem? (Without going back to Snow Leopard)
Q2: Why this parential supervision by Apple?

riks1105 wrote:
because "it uses too much power"
I did'nt get that message a few weeks ago when I used Snow Leopard and now I can't approach the files I saved on the external disk.
Question 1: How do I solve the problem? (Without going back to Snow Leopard)
Q2: Why this parential supervision by Apple?
Get a powered hub
USB is cranky, you're not the first (probably not the last) to have this happen.

Using too much processor to render

Similar Messages

Maybe you are looking for