USING TRIGGER ON VIEW

Hi,
Can I use a trigger on a view, which insert/ update/ delete on a table(not base table)
whenever a data change in the view.
Thanks

b_**** wrote:
http://download.oracle.com/docs/cd/B10500_01/server.920/a96524/c18trigs.htm
Jeez, at least provide a link to documentation for a supported version...
10g: http://download.oracle.com/docs/cd/B19306_01/server.102/b14220/triggers.htm#CNCPT017
11g: http://download.oracle.com/docs/cd/E11882_01/server.112/e16508/srvrside.htm#CNCPT118

Similar Messages

INSTEAD OF trigger on view to update a table. error in 4.2apex tabular rpt

I have created a view (LANDINGS_VIEW') that I am hoping to use to add/modify data over several tables. I am using INSTEAD OF trigger to update/insert into the underlying tables. I am receiving the error:
•ORA-01858: a non-numeric character was found where a numeric was expected ORA-06512: at "SAFIS.LANDINGS_V_IO_UPD_TRG", line 4 ORA-04088: error during execution of trigger 'SAFIS.LANDINGS_V_IO_UPD_TRG' (Row 1)I am only setting PRICE = 300.
any thoughts? Am I setting this up propertly? thanks for your help!!
Karen
The LANDING_VIEW is set up as follows:
-- Start of DDL Script for View SAFIS.LANDINGS_VIEW
-- Generated 03-May-2013 10:25:38 from [email protected]
CREATE OR REPLACE VIEW landings_view (
   landing_seq,
   dealer_rpt_id,
   unit_measure,
   reported_quantity,
   landed_pounds,
   dollars,
   disposition_code,
   grade_code,
   species_itis,
   market_code,
   price,
   area_fished,
   sub_area_fished,
   lease_num,
   gear_code,
   de,
   ue,
   dc,
   uc,
   local_area_code,
   fins_attached,
   explanation,
   late_report,
   modified_data,
   nature_of_sale,
   hms_area_code,
   sale_price,
   deleted )
AS
select l.LANDING_SEQ,
       l.DEALER_RPT_ID,
       l.UNIT_MEASURE,
       l.REPORTED_QUANTITY,
       l.LANDED_POUNDS,
       l.DOLLARS,
       l.DISPOSITION_CODE,
       l.GRADE_CODE,
       l.SPECIES_ITIS,
       l.MARKET_CODE,
       l.PRICE,
       l.AREA_FISHED,
       l.SUB_AREA_FISHED,
       l.LEASE_NUM,
       l.GEAR_CODE,
       l.DE,
       l.UE,
       l.DC,
       l.UC,
       l.LOCAL_AREA_CODE,
       a.fins_attached,
       a.explanation,
       a.late_report,
       a.modified_data,
       a.nature_of_sale,
       a.hms_area_code,
       a.sale_price,
       a.deleted
from landings l,
       landings_hms a
where l.dealer_rpt_id = v('P110_DEALER_RPT_ID') and
        l.dealer_rpt_id = a.dealer_rpt_id(+) and
        l.landing_seq = a.landing_seq(+)
-- Triggers for LANDINGS_VIEW
CREATE OR REPLACE TRIGGER landings_v_io_upd_trg
INSTEAD OF
UPDATE
ON landings_view
REFERENCING NEW AS NEW OLD AS OLD
DECLARE
   v_first_day   date;
   BEGIN
update landings set landing_seq = :old.landing_seq,
                          dealer_rpt_id = :old.dealer_rpt_id,
                          unit_measure = :new.unit_measure,
                          reported_quantity = :new.reported_quantity,
                        -- landed_pounds = :new.landed_pounds,
                          dollars = :new.dollars,
                          disposition_code= :new.disposition_code,
                          grade_code = :new.grade_code,
                          species_itis = :new.species_itis,
                           market_code = :new.market_code,
                          price = :new.price,
                          area_fished = :new.area_fished,
                          sub_area_fished = :new.sub_area_fished,
                       --   lease_num = :new.lease_num,
                          gear_code = :new.gear_code,
                          de = :new.de,
                          ue = :new.ue,
                          dc = :new.ue,
                          uc = :new.uc,
                          local_area_code = :new.local_area_code ;
    /* update landings_hms set dealer_rpt_id = :old.dealer_rpt_id,
                             landing_seq = :old.landing_seq,
                             fins_attached = :new.fins_attached,
                             explanation = :new.explanation,
                             late_report = :new.late_report,
                             modified_data = :new.modified_data,
                             nature_of_sale = :new.nature_of_sale,
                             hms_area_code = :new.hms_area_code,
                             sale_price = :new.sale_price,
                             de = sysdate,
                             ue = :new.ue,
                             dc = :new.dc,
                             uc = :new.uc ;
end;
-- End of DDL Script for Trigger SAFIS.LANDINGS_KEH_V_IO_TRG
CREATE OR REPLACE TRIGGER landings_v_io_trg
INSTEAD OF
INSERT
ON landings_view
REFERENCING NEW AS NEW OLD AS OLD
DECLARE
   v_first_day   date;
   BEGIN
insert into landings_keh (landing_seq,
                          dealer_rpt_id,
                          unit_measure,
                          reported_quantity,
                          landed_pounds,
                          dollars,
                          disposition_code,
                          grade_code,
                          species_itis,
                          market_code,
                          price,
                          area_fished,
                          sub_area_fished,
                          lease_num,
                          gear_code,
                          de,
                          ue,
                          dc,
                          uc,
                          local_area_code)
   values ( landings_seq.NEXTVAL,
            :new.dealer_rpt_id,
            :new.unit_measure,
            :new.reported_quantity,
            :new.landed_pounds,
            :new.dollars,
            :new.disposition_code,
            :new.grade_code,
            :new.species_itis,
            :new.market_code,
            :new.price,
            :new.area_fished,
            :new.sub_area_fished,
            :new.lease_num,
            :new.gear_code,
            sysdate,
            :new.ue,
            :new.dc,
            :new.uc,
            :new.local_area_code) ;
   insert into landings_hms (dealer_rpt_id,
                             landing_seq,
                             fins_attached,
                             explanation,
                             late_report,
                             modified_data,
                             nature_of_sale,
                             hms_area_code,
                             sale_price,
                             de,
                             ue,
                             dc,
                             uc,
                             deleted)
       values (:new.dealer_rpt_id,
               landings_seq.CURRVAL,
               :new.fins_attached,
               :new.explanation,
               :new.late_report,
               :new.modified_data,
               :new.nature_of_sale,
               :new.hms_area_code,
               :new.sale_price,
               sysdate,
               :new.ue,
               :new.dc,
               :new.uc,
               :new.deleted);
end;
-- End of DDL Script for Trigger SAFIS.LANDINGS_KEH_V_IO_TRG
-- End of DDL Script for View SAFIS.LANDINGS_VIEWbtw, I have succefully run the following update in sqlplus.
update landings set landing_seq = 8604583,
dealer_rpt_id = 2660038,
unit_measure = 'LB',
reported_quantity = 3,
-- landed_pounds = :new.landed_pounds,
dollars = 900,
disposition_code= '001',
grade_code = '10',
species_itis = '160200',
market_code = 'UN',
price = 30,
area_fished = null,
sub_area_fished =null,
-- lease_num = :new.lease_num,
gear_code = '050',
de = sysdate,
ue = 'keh',
dc = null,
uc = 'keh',
local_area_code = null
where landing_seq = 8604583; I am using apex 4.2
Edited by: KarenH on May 3, 2013 10:29 AM
Edited by: KarenH on May 3, 2013 10:31 AM
Edited by: KarenH on May 3, 2013 11:04 AM
Edited by: KarenH on May 3, 2013 4:09 PM

could it be so simple?
when I created the tabular form on my view, LANDINGS_VIEW, the APPLYmru was automatically generated, referencing the view name LANDINGS_VIEW. I modified that to indicate the table name (LANDINGS). I am not certain why that would work, but it seems to so far.
this post was helpful: Re: instead of trigger on view
I am now testing to make certain both the underlying tables can be updated, LANDINGS and LANDINGS_HMS

Create trigger on view belong to different schema of same db

Hi Guru's,
I have two different schema in the same DB.
Example : schema1 and schema2
I have one view on schema1 and i have grant select to schema2 and create synonym for that view.
Now i need to create trigger on synonym which created from view in schema1 and insert the data into different table from trigger when insert happen on view.
first of all , is it possible?
if its possible then do i need to give create any trigger on view to schema2.
Or is there any other we can get this done..
Many thanks.

Hi,
user590978 wrote:
Hi Guru's,
I have two different schema in the same DB.
Example : schema1 and schema2
I have one view on schema1 and i have grant select to schema2 and create synonym for that view.
Now i need to create trigger on synonym I'm not sure I understand you.
Triggers operate on tables and views (but I'll just say "table" from now on). It doesn't matter if the statement that caused the trigger to fire used the actual table name or a synonym.
which created from view in schema1 and insert the data into different table from trigger when insert happen on view.
first of all , is it possible?I'm not sure I understand you here, either.
It is possible to have a trigger on a view in schema1, which INSERTs data into a table. That table can be in any schema, just so long as the trigger owner has privilges on INSERT into it.
if its possible then do i need to give create any trigger on view to schema2.It's very dangerous, and usually a terrible idea, to grant the CREATE ANY privileges to users.
Schema2 needs the CREATE ANY TRIGGER system privilege only to create a trigger in another schema, such as schema1. There's probably no reason to do that. Let schmea1 create the objects in its own schema.
Post a test script that shows what you want to do. Include CREATE TABLE, CREATE VIEW, CREATE TRIGGER, CONNECT and INSERT statements, and the results you want (the contents of tables where the trigger INSERTed data). If you don't know how to code something, post the closest thing you can, and explain what you really want to do in that place.

Instead of trigger on view with CLOB data

I have writed Instead of trigger for view "article(id,text)" with CLOB
field "text".
create or replace trigger v_article_insert
instead of insert on v_article
for each row
declare
begin
insert into article(id,text) values(id,:new.text);
end v_article_insert;
When I try to do DML (insert, update), forexample:
insert into v_article(text) values('bla-bla')
I get:
ORA-25008 no implicit conversion to LOB datatype in instead-of trigger.
( Cause: When inserting or updating a view using instead-of trigger, the
new value for a LOB view column is of a different datatype.
Action: Specified a LOB value as the new value for the LOB view
column.)
insert into v_article(text) values(empty_clob()) - It works...
What does it mean and what is right syntax for DML for CLOB fields in
instead of triggers?

When inserting CLOBs you create the row with an Empty_Clob() to initialize the CLOB field. Then you can update the empty CLOB with your CLOB value.
The error message is telling you that Oracle will not convert your CLOB to the initialization value needed.

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems n

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

How to use table maintenance view in module pool screen

hi ,
want to use table maintenance view in a module pool screen so that i can edit, insert, delete and update date in to the ztable.please help.

You can simply call it via SM30.   Or you can call the table maintence view from any program(report or module pool) using a function module.
call function 'VIEW_MAINTENANCE_CALL'
       exporting
            action                       = 'U'
            view_name                    = 'Z_Table_Name'
       exceptions
            client_reference             = 1
            foreign_lock                 = 2
            invalid_action               = 3
            no_clientindependent_auth    = 4
            no_database_function         = 5
            no_editor_function           = 6
            no_show_auth                 = 7
            no_tvdir_entry               = 8
            no_upd_auth                  = 9
            only_show_allowed            = 10
            system_failure               = 11
            unknown_field_in_dba_sellist = 12
            view_not_found               = 13
            others                       = 14.
Regards,
RIch Heilman

How to use a Table View in AppleScriptObjC

How can I use a table view and add data to it? And how can I display a button cell and image cell in the table? Thanks.

Hi all,
Actually i need some more clarification. How to use the same select statement, if i've to use the tabname in the where clause too?
for ex : select * from (tab_name) where....?
Can we do inner join on such select statements? If so how?
Thanks & Regards,
Mallik.

Re: [SunONE-JATO] How to use a tiled view without a model

John,
Check out the docs for DefaultModel. There is an appendRow() method.
So get your tiledview's primary model (the tiledview's primary model
should be set to use an instance of DefaultModel), model.appendRow(),
then model.setValue("fieldname", value) for each value.
Rinse, repeat as needed.
c
jhoskins wrote:
I would like to use a tiled view, but populate the fields manually.
Any pointers about where I can set the size of the tiled view? I tried
setMaxDisplayTiles() in the beginDisplay, but it won't get down and
generate the rows.
John Hoskins
To download the latest version of JATO, please visit:
http://www.sun.com/software/download/developer/5102.html
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp

Craig,
Thanks for the pointers. I ended up doing something else. I set the
models setSize() method to set the max size, and as the tiles fields
iterated, populated the value from some vectors I had the data in
already. Is this solution fraught with peril and will ultimately fail,
or should I try your way?
John
--- "Craig V. Conover" wrote:
John,
Check out the docs for DefaultModel. There is an appendRow() method.
So get your tiledview's primary model (the tiledview's primary model
should be set to use an instance of DefaultModel), model.appendRow(),
then model.setValue("fieldname", value) for each value.
Rinse, repeat as needed.
c
jhoskins wrote:
I would like to use a tiled view, but populate the fields manually.
Any pointers about where I can set the size of the tiled view? I tried
setMaxDisplayTiles() in the beginDisplay, but it won't get down and
generate the rows.
John Hoskins
To download the latest version of JATO, please visit:
http://www.sun.com/software/download/developer/5102.html
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp

Re: [SunONE-JATO] Re: How to use a tiled view without a model

I'm not sure what is different for you now. You still parse the string
and put it into a data structure. Before the data structure was a
vector, in JATO its just a model with a "hidden" data structure (a hash
map).
MVC only really comes into play when you talk about where your write
this code, and where the data structure is being stored. So really, JATO
takes care of half of the MVC'ness of it all (where the data is store).
You just decide where to be the code to populate the model.
Make sense?
Is there something different required of you in JATO in this scenario
that I am not grasping?
c
Hoskins, John D. wrote:
Thanks for the feedback.
The problem I was solving involved a single string, which contained
delimited subsets of information.
The string looked like
this:"time|analyst|description|time|analyst|description|..."
In ND, I parsed it apart into it's components (time vector, analyst vector,
description vector), populated the repeated.
With JATO, how would I make a model for something that doesn't have a
database component like this?
I'm pretty new to this MVC thing, so bear with me.
John D. Hoskins
Telephone & Data Systems
Application Development & Support
Voice: 608.664.8263
Fax: 608.664.8288
Email: john.hoskins@t...
-----Original Message-----
From: Craig V. Conover [mailto:<a href="/group/SunONE-JATO/post?protectID=219212113009229091025149066024064239039098031198039130252055210">craig.conover@s...</a>]
Sent: 6/26/2002 3.22 PM
Subject: Re: [SunONE-JATO] Re: How to use a tiled view without a model
I guess the only thing "weird" (for lack of a better term) about what
you are doing is that your are populating the model on the "display
cycle". Typically, the cycle goes like this:
Request -> populate model -> update data store -> retrieve data to
populate model -> display data
some of the above steps are optional but hopefully you get the point I
am making.
So what you are doing is:
Request -> populate model/display data
If it works for you, then it's not necessarilly wrong. But I would
probably have my model populated before I forwarded to the target
(displaying view bean) or at a minimum, in the begin display event of
the view bean or the tiled view, but not during the iteration of the
tiled view.
c
jhoskins wrote:
Craig,
Thanks for the pointers. I ended up doing something else. I set the
models setSize() method to set the max size, and as the tiles fields
iterated, populated the value from some vectors I had the data in
already. Is this solution fraught with peril and will ultimately fail,
or should I try your way?
John
--- Craig V. Conover wrote:
John,
Check out the docs for DefaultModel. There is an appendRow() method.
So get your tiledview's primary model (the tiledview's primary model
should be set to use an instance of DefaultModel), model.appendRow(),
then model.setValue("fieldname", value) for each value.
Rinse, repeat as needed.
c
jhoskins wrote:
I would like to use a tiled view, but populate the fields manually.
Any pointers about where I can set the size of the tiled view? I tried
setMaxDisplayTiles() in the beginDisplay, but it won't get down and
generate the rows.
John Hoskins
To download the latest version of JATO, please visit:
http://www.sun.com/software/download/developer/5102.html
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp
To download the latest version of JATO, please visit:
http://www.sun.com/software/download/developer/5102.html
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp
To download the latest version of JATO, please visit:
http://www.sun.com/software/download/developer/5102.html
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp
To download the latest version of JATO, please visit:
http://www.sun.com/software/download/developer/5102.html
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp

Craig,
Thanks for the pointers. I ended up doing something else. I set the
models setSize() method to set the max size, and as the tiles fields
iterated, populated the value from some vectors I had the data in
already. Is this solution fraught with peril and will ultimately fail,
or should I try your way?
John
--- "Craig V. Conover" wrote:
John,
Check out the docs for DefaultModel. There is an appendRow() method.
So get your tiledview's primary model (the tiledview's primary model
should be set to use an instance of DefaultModel), model.appendRow(),
then model.setValue("fieldname", value) for each value.
Rinse, repeat as needed.
c
jhoskins wrote:
I would like to use a tiled view, but populate the fields manually.
Any pointers about where I can set the size of the tiled view? I tried
setMaxDisplayTiles() in the beginDisplay, but it won't get down and
generate the rows.
John Hoskins
To download the latest version of JATO, please visit:
http://www.sun.com/software/download/developer/5102.html
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp

I am trying to open a website that is using Microsoft content viewer, and the page does not show. Any ideas on how to view this site using firefox. It works on IE.

I am participating in an online class whose website uses Microsoft Content Viewer to view the class content. The browser opens a new page, but nothing is there. At the top of the tab it says Microsoft Content Viewer, and nothing else. Can anyone tell me how to view my course using Firefox? I would prefer not to use IE, but it works there.

When originally creating the pdf, you would need to choose another pdf conversion setting. In Word if you use the pdf menu, change your settings there: Adobe PDF > Change Conversion Settings. I would use High Quality Print instead. If you use the File > Print method, click the Properties button next to the Adobe PDF printer selection.
For your already created form, you can change the file so your users will not encounter issues. In Acrobat 9, which hopefully is similar in process to 8: Advanced > Preflight > Profile tab > PDF/A compliance > Remove PDF/A information.(You'll have to unsecure your form first).
You can read about PDF/A files in the Help.

Problem on using Crystal Report Viewer on windows application ("specified type is not valid ")

Hi
I am having problem on using Crystal Report Viewer on one of my windows application.
I am not sure how to put the Crystal Report Viewer 11 Control onto the tool box.
I could found a Crystal Report Viewer control on my computer, but it is version 8.5.
I have also found another one which is Called Crytal ActiveX Report Viewer, i don't think it is the one I can use. As when I try to load a dummy report on to the Crytal ActiveX Report Viewer, It return an error. "specified type is not valid"
Please see the Code sample below.
private sub loadReport()
     Dim r as New ReportDocument
     'v is the name of the Crystal ActiveX Report Viewer Control
     r.Load("C:\Report1.rtp")
     v.ReportSource(r) <---It throw error on this line.
End Sub
Could you give me some advice about what have I done wrong, How to check if I have set up the Crystal Report Component correctly in my Visual Studio 2005 Standard edition.
Thanks in advances.
Many thanks
Chi

VS 2005 Standard and Express editions do not come with Crystal Reports; only the Professional and higher editions will have CR bundled. However, I believe you can purchase CR XI R2 Developer and it will give you the components you need to create a VS .NET 2005 application using the Standard edition.
-MJ

How to use Crystal report viewer in a portlet based web application

I am using JRC to view crystal reports in porlet based web application. Following is the code in JSP
<%@ page import="com.crystaldecisions.report.web.viewer.CrystalReportViewer,
com.crystaldecisions.sdk.occa.report.application.OpenReportOptions,
com.crystaldecisions.sdk.occa.report.application.ReportClientDocument,
com.crystaldecisions.sdk.occa.report.lib.ReportSDKExceptionBase" %>
<portlet:defineObjects />
<%
     // This sample code calls methods from the CRJavaHelper class, which
     // contains examples of how to use the BusinessObjects APIs. You are free to
     // modify and distribute the source code contained in the CRJavaHelper class.
     try {
          String reportName = "ProactiveEventsSummaryData.rpt";
          ReportClientDocument clientDoc = (ReportClientDocument) session.getAttribute(reportName);
          if (clientDoc == null) {
               // Report can be opened from the relative location specified in the CRConfig.xml, or the report location
               // tag can be removed to open the reports as Java resources or using an absolute path
               // (absolute path not recommended for Web applications).
               clientDoc = new ReportClientDocument();
               //clientDoc.setReportAppServer(ReportClientDocument.inprocConnectionString);
                              clientDoc.setReportAppServer("inproc:jrc");
               // Open report
               clientDoc.open(reportName, OpenReportOptions._openAsReadOnly);
               // Store the report document in session
               session.setAttribute(reportName, clientDoc);
          // ****** BEGIN CONNECT CRYSTALREPORTPAGEVIEWER SNIPPET ****************
               // Create the CrystalReportViewer object
               CrystalReportViewer crystalReportPageViewer = new CrystalReportViewer();
               String reportSourceSessionKey = reportName+"ReportSource";
               Object reportSource = session.getAttribute(reportSourceSessionKey);
               if (reportSource == null)
                    reportSource = clientDoc.getReportSource();
                    session.setAttribute(reportSourceSessionKey, reportSource);
               //     set the reportsource property of the viewer
               crystalReportPageViewer.setReportSource(reportSource);
               // Apply the viewer preference attributes
               // Process the report
               crystalReportPageViewer.processHttpRequest(request, response, application, null);
          // ****** END CONNECT CRYSTALREPORTPAGEVIEWER SNIPPET ****************
     } catch (ReportSDKExceptionBase e) {
         out.println(e);
%>
With this code , report gets displayed in the portlet but none of the actions on thre report like next page click , search button , opening subreport , clicking on drill-downs are working . The error in the explorer console is as shown below
Error: CrystalViewerCrystalEvent is not defined
javascript:CrystalViewerCrystalEvent('CrystalViewer',%20'tb=next')
PageSource of the web page shows the CrystalViewerCrystalEvent javascript function defined but for somereason its not recognized by the portlet. Has anyone worked on displaying crystalreports in a portlet ?

Code attached
<%@ page import="com.crystaldecisions.report.web.viewer.CrystalReportViewer,
com.crystaldecisions.sdk.occa.report.application.OpenReportOptions,
com.crystaldecisions.sdk.occa.report.application.ReportClientDocument,
com.crystaldecisions.sdk.occa.report.lib.ReportSDKExceptionBase" %>
<portlet:defineObjects />
<%
     // This sample code calls methods from the CRJavaHelper class, which
     // contains examples of how to use the BusinessObjects APIs. You are free to
     // modify and distribute the source code contained in the CRJavaHelper class.
     try {
          String reportName = "ProactiveEventsSummaryData.rpt";
          ReportClientDocument clientDoc = (ReportClientDocument) session.getAttribute(reportName);
          if (clientDoc == null) {
               // Report can be opened from the relative location specified in the CRConfig.xml, or the report location
               // tag can be removed to open the reports as Java resources or using an absolute path
               // (absolute path not recommended for Web applications).
               clientDoc = new ReportClientDocument();
               //clientDoc.setReportAppServer(ReportClientDocument.inprocConnectionString);
                              clientDoc.setReportAppServer("inproc:jrc");
               // Open report
               clientDoc.open(reportName, OpenReportOptions._openAsReadOnly);
               // Store the report document in session
               session.setAttribute(reportName, clientDoc);
          // ****** BEGIN CONNECT CRYSTALREPORTPAGEVIEWER SNIPPET ****************
               // Create the CrystalReportViewer object
               CrystalReportViewer crystalReportPageViewer = new CrystalReportViewer();
               String reportSourceSessionKey = reportName+"ReportSource";
               Object reportSource = session.getAttribute(reportSourceSessionKey);
               if (reportSource == null)
                    reportSource = clientDoc.getReportSource();
                    session.setAttribute(reportSourceSessionKey, reportSource);
               //     set the reportsource property of the viewer
               crystalReportPageViewer.setReportSource(reportSource);
               // Apply the viewer preference attributes
               // Process the report
               crystalReportPageViewer.processHttpRequest(request, response, application, null);
          // ****** END CONNECT CRYSTALREPORTPAGEVIEWER SNIPPET ****************
     } catch (ReportSDKExceptionBase e) {
         out.println(e);
%>
Edited by: teethoma on Nov 30, 2009 10:06 AM

Paging issues using a dynamic view object...

I am working on an application that uses JAG to generate JSP pages, i had the requirement to use dynamic view objects where the view object query is generated at runtime. The rest of the application is more or less the same... I used the defult functionality provided by TableScrollButtons.jsp file for paging. Now the problem im facing is that while the '>' and '<' buttons are working fine, i cant seem to navigate to the pages using the drop down...
With the default handler, whenever i select the range the range displayed remains the same ie 1-10, 10 being the rangesize, but the rows are refreshed with values from the next page. Also, if the next page is the last and is incomplete, then the rows are pushed in from the bottom, so that the last page is always full...I tried the tuning panel in the view object edit dialogue and all settings are fine (i think)...could anyone please tell me what i am doing wrong??

could it be because i am using a dynamic view object with dynamic bindings? i am using the preparemodel() method in the action as follows...
protected void prepareModel(DataActionContext ctx) throws Exception {
inferRangeBindingIfUnset(ctx);
ctx.getBindingContainer().setEnableTokenValidation(false);
String sql = ctx.getHttpServletRequest().getParameter("sql");
String cost=ctx.getHttpServletRequest().getParameter("CostCostCent");
String event=ctx.getHttpServletRequest().getParameter("event");
if (sql != null && event == null) {
setupDynamicQueryAndDynamicBindings(ctx,sql.substring(1),cost);
if (retrieveOnlyCurrentPageFromDatabase()) {
ViewObject vo = getIterForPaging(ctx).getViewObject();
if (vo.getAccessMode() != ViewObject.RANGE_PAGING) {
vo.setAccessMode(ViewObject.RANGE_PAGING);
// if(event==null)
super.prepareModel(ctx);
ctx.getBindingContainer().setEnableTokenValidation(true);
if (ctx.getEvents() == null || ctx.getEvents().size() ==0) {
setPage(ctx,1);
setLastPage(ctx,getIterForPaging(ctx).getRowSetIterator().getEstimatedRangePageCount());
else if(event.equals("setRangeStart")) {
setPageFromRequest(ctx);
}

How can i print reports to different printer by use Trigger on table after insert

Hello,
Please can any one tell me how can i print (any message) to different printer (network & local printer) by use Trigger on table after insert.
regards,
Linda.

What you want to do cannot be done with PL/SQL, which does have any print utilities. However you could write something using Java Stored Procedures.
Of course the "different printer" bit will have to be data driven as triggers are not interactive.
rgds, APC

Error when trying to use the Log Viewer

Hello experts, today I wanted to examine some logs using the Log Viewer on Visual Administrator. However, when clicking on this service, the Visual Administrator would freeze for a long while and after that, an error message was displayed. I do not remember the exact message, but it was something like "A fatal error occurred. For more information, click on the Details button". After clicking on that button, the following error was displayed:
com.sapmarkets.bam.util.BAMRuntimeException
at com.sapmarkets.bam.jmx.connector.rmi.AbstractConnectorClient.invoke(AbstractConnectorClient.java:110)
at $Proxy31.getAttribute(Unknown Source)
at com.sapmarkets.bam.application.logdepot.AbstractLogDepot.getAttribute(AbstractLogDepot.java:236)
at com.sapmarkets.bam.application.logdepot.AbstractLogDepot.getLogDescriptors(AbstractLogDepot.java:84)
at com.sapmarkets.bam.view.config.RemoteViewConfiguration.initializeViewConfiguration(RemoteViewConfiguration.java:65)
at com.sapmarkets.bam.view.overview.OverviewFacade.populateOverview(OverviewFacade.java:219)
at com.sapmarkets.bam.view.AbstractLogViewerAppplication.populateOverview(AbstractLogViewerAppplication.java:171)
at com.sapmarkets.bam.view.AbstractLogViewerAppplication.initOverview(AbstractLogViewerAppplication.java:652)
at com.sapmarkets.bam.j2ee.services.logviewer.gui.LogViewerRuntimeLogical.setRuntime(LogViewerRuntimeLogical.java:121)
at com.sapmarkets.bam.j2ee.services.logviewer.gui.LogViewerRuntimeLogical.show(LogViewerRuntimeLogical.java:88)
at com.sap.engine.services.adminadapter.gui.node.ServiceNodeView.selectSingleService(ServiceNodeView.java:202)
at com.sap.engine.services.adminadapter.gui.node.ServiceNodeView.selectNode(ServiceNodeView.java:156)
at com.sap.engine.services.adminadapter.gui.AdminManager.selectServiceNode(AdminManager.java:290)
at com.sap.engine.services.adminadapter.gui.AdminManager.selectNode(AdminManager.java:170)
at com.sap.engine.services.adminadapter.gui.AdminManager.valueChanged(AdminManager.java:108)
at javax.swing.JTree.fireValueChanged(JTree.java:2392)
at javax.swing.JTree$TreeSelectionRedirector.valueChanged(JTree.java:2763)
at javax.swing.tree.DefaultTreeSelectionModel.fireValueChanged(DefaultTreeSelectionModel.java:629)
at javax.swing.tree.DefaultTreeSelectionModel.notifyPathChange(DefaultTreeSelectionModel.java:1076)
at javax.swing.tree.DefaultTreeSelectionModel.setSelectionPaths(DefaultTreeSelectionModel.java:287)
at javax.swing.JTree.setSelectionInterval(JTree.java:2041)
at javax.swing.plaf.basic.BasicTreeUI$TreeIncrementAction.actionPerformed(BasicTreeUI.java:3268)
at javax.swing.SwingUtilities.notifyAction(SwingUtilities.java:1530)
at javax.swing.JComponent.processKeyBinding(JComponent.java:2438)
at javax.swing.JComponent.processKeyBindings(JComponent.java:2473)
at javax.swing.JComponent.processKeyEvent(JComponent.java:2401)
at java.awt.Component.processEvent(Component.java:4978)
at java.awt.Container.processEvent(Container.java:1569)
at java.awt.Component.dispatchEventImpl(Component.java:3684)
at java.awt.Container.dispatchEventImpl(Container.java:1627)
at java.awt.Component.dispatchEvent(Component.java:3546)
at java.awt.KeyboardFocusManager.redispatchEvent(KeyboardFocusManager.java:1713)
at java.awt.DefaultKeyboardFocusManager.dispatchKeyEvent(DefaultKeyboardFocusManager.java:627)
at java.awt.DefaultKeyboardFocusManager.preDispatchKeyEvent(DefaultKeyboardFocusManager.java:831)
at java.awt.DefaultKeyboardFocusManager.typeAheadAssertions(DefaultKeyboardFocusManager.java:741)
at java.awt.DefaultKeyboardFocusManager.dispatchEvent(DefaultKeyboardFocusManager.java:592)
at java.awt.Component.dispatchEventImpl(Component.java:3575)
at java.awt.Container.dispatchEventImpl(Container.java:1627)
at java.awt.Window.dispatchEventImpl(Window.java:1606)
at java.awt.Component.dispatchEvent(Component.java:3546)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:480)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
Caused by: java.lang.reflect.InvocationTargetException
at com.sapmarkets.bam.util.FutureResult.get(FutureResult.java:71)
at com.sapmarkets.bam.jmx.connector.rmi.AbstractConnectorClient.invoke(AbstractConnectorClient.java:104)
... 45 more
Caused by: java.lang.OutOfMemoryError: Java heap space
at javax.management.ObjectName.construct(ObjectName.java:385)
at javax.management.ObjectName.readObject(ObjectName.java:1063)
at sun.reflect.GeneratedMethodAccessor60.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at java.io.ObjectStreamClass.invokeReadObject(ObjectStreamClass.java:838)
at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1736)
at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1646)
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1274)
at java.io.ObjectInputStream.readObject(ObjectInputStream.java:322)
at java.util.ArrayList.readObject(ArrayList.java:559)
at sun.reflect.GeneratedMethodAccessor63.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at java.io.ObjectStreamClass.invokeReadObject(ObjectStreamClass.java:838)
at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1736)
at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1646)
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1274)
at java.io.ObjectInputStream.readObject(ObjectInputStream.java:322)
at java.util.HashMap.readObject(HashMap.java:1015)
at sun.reflect.GeneratedMethodAccessor64.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at java.io.ObjectStreamClass.invokeReadObject(ObjectStreamClass.java:838)
at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1736)
at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1646)
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1274)
at java.io.ObjectInputStream.defaultReadFields(ObjectInputStream.java:1835)
at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1759)
at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1646)
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1274)
at java.io.ObjectInputStream.readObject(ObjectInputStream.java:322)
The lines I marked in bold are the ones that caught my attention. What is this error and how can I fix it?

Hello, thanks for your answers. I checked the JVM Heap size, we are using a 64 bit HW, and it was already set to 2048M, as well as both parameters Xms and Xmx. I also checked our virtual memory and directory space, the virtual memory looks fine, and the <SID> directory uses 5 GB of space.
If you wish, I can write the configuration found on the Config Tool, where you set the JVM Heap size and other parameters.

USING TRIGGER ON VIEW

Similar Messages

Maybe you are looking for