Using two BT Branded Youview Humax boxes

9 months ago I purchased a second BT branded Humax Youview box from John Lewis. The two boxes have worked on the internet channels perfectly well. I have now had access to the internet channels removed on the second box. I very rarely had need to access the internet channels on both boxes at the same time, it was just convenient to be able to use then in two different places. I am prepared to pay the £5 a month extra to reaccess the internet channels on the second box, but do I really have to pay £99 pounds for another box, when these two have been fine. BT have stated that they will only provide the service on two BT supplied boxes, and not on a 3rd party supplied box. Why would John Lewis a highly respected retailer be selling BT branded boxes for any other reason than use as a second box. If I had a fault with my BT supplied box I would go to BT for a replacement, in or out of contract. Why is it neccessary to have a G4 box

richardj wrote:
9 months ago I purchased a second BT branded Humax Youview box from John Lewis. The two boxes have worked on the internet channels perfectly well. I have now had access to the internet channels removed on the second box. I very rarely had need to access the internet channels on both boxes at the same time, it was just convenient to be able to use then in two different places. I am prepared to pay the £5 a month extra to reaccess the internet channels on the second box, but do I really have to pay £99 pounds for another box, when these two have been fine. BT have stated that they will only provide the service on two BT supplied boxes, and not on a 3rd party supplied box. Why would John Lewis a highly respected retailer be selling BT branded boxes for any other reason than use as a second box. If I had a fault with my BT supplied box I would go to BT for a replacement, in or out of contract. Why is it neccessary to have a G4 box
To address the bold text -
Yes - you do need two Youview boxes that BT provide to you. BT appear currently to be inflexible on this. Note that BT do not currently sell any of its non BT lve internet channels packages/add-ons/bolt-ons for use on retail bought boxes.So its clearly a commercial or channel licensing decision not to do so.
The G4 is not itself a requirement for multiroom - it's simply the current standard new box that BT issue so if you order a extra box for multiroom thats the one you get.

Similar Messages

Using two boxes at the same time

before the update i was using two boxes at home one for the kids and one for me after the update i can only use one box is this right

2 boxes on the new software work better than on the classic software. The only problems you will have is if you have the Multicast, the system does not seem very keen on the idea of having 2 multicast boxes on the same account. You can avoid this problem by declining the software update on the second box.

How to use Two main windows with in a page in script ?

Hi any body explain me...
How to use Two main windows with in a page in script ?
with header data in one main window,
& Item data in other main window.

HI..,
u need to go for SPLITTING THE MAIN WINDOW !!!
Main windows in page windows allow you to format text in multiple columns. Define an area in the page window, in which to position the main windows.
Here is the procedure !!
-->Create a page window and assign it to a page.
Choose Edit --> Main windows.
A dialog box appears.
-->Enter values in the fields Area width and Area height in accordance with the input guidelines for main windows.
-->Enter values in the fields Spacing and Number in the Horizontal group if you want to use multiple columns. You can ignore the fields in the Vertical group.
Determine how many columns and line areas are required for label printing. Then enter the corresponding values in the fields in the Horizontal and Vertical groups.
-->The value in the field Left margin varies from main window to main window if multiple columns are used. The following applies:

Left margin of current column + Window width + Horizontal spacing = Left margin of next column
In label printing, the field Upper margin also varies from main window to main window:

Upper margin of current main window + Window height + Vertical spacing = Upper margin of next main window
-->Enter a value in the field Start position.
This is a counter. Enter a starting value which is equal to or greater than 1.
-->The main windows are added to the list.
-->Save your form.
reward if it helps u...
sai ramesh

How do you use the Multiple Item Information dialog box ???

How do you use the Multiple Item Information dialog box ???
Where are the instructions on how the information in the Multiple Item Information dialog box equates to ...
1. The way iTunes sorts tracks and albums
2. The reason to select a leading check box
3. Why there are Option selections (Yes /No) and leading check boxes.
4. Why some changes remain in the track info, but do not "take effect" in iTunes (Part of a compilation is an example)
Looked in Help, Support, went to the local Genius bar for an hour, even arrainged a call from apple support ...
Thanks

As Christopher says, it's a compilation. Different tracks are by different artists.
Setting the *Album Artist* field to *Various Artists* and setting *Part of a compilation* to Yes should be all that is required. Depending on your *Group compilations when browsing* setting ( I recommend On ) either should suffice but I suggest doing both.
Based on your commentary, I selected all the "O Brother" tracks, and checked the boxes for everything line that was blank in the Info and the Sort panes. Only exceptions were the album name and the disc number 1 of 1 and the artwork. I blanked and checked anything else.
That's not what I meant. When you select multiple tracks, only those values which +are already common+ to all tracks are displayed. Typically these will include Artist, though not with compilation albums, Album Artist, Album, No. of Tracks, Genre plus various sort fields. A blank value may indicate that different tracks have different values or it may be that the value is blank for all tracks. For the drop down values on the Options tab the value shown may not reflect the information in every tag. If values you expect to be common, such as Album Artist or the Album title are not displayed you can simply type these in and click OK. This will often be enough to group the album.
If you place a checkmark against the blank boxes and apply changes then you will clear those fields so you should only do this if that is the effect you want. Putting a checkmark next to an empty (representing different values) *Track No.* box, for example, will just clear the all the track numbers which is very rarely useful.
Adding then removing extra text is for a specific problem where despite all common values being identical across the tracks of the album iTunes seems to "remember" that it should see two albums. A typical example would be when an album originally listed as *Album CD1* & *Album CD2* is given disc numbers X of Y and then has the Album name changed to Album. I've seen iTunes merge all but one track into the new album, but insist on listing one remaining track separately, despite both albums having the same title. In this case I've found overtyping the album title again has no effect whereas changing it to AlbumX and then back to Album does what I was trying to achieve in the first place.
Don't forget that even properly organsied albums may still break up if you don't chose an album-friendly view. Sorting on the track name or track number columns can be useful in some circumstances but in general I revert to Album by Artist when browsing through my library.
tt2

How to use two ipads with icloud on one computer

Can you use two iPads on one computer with iCloud so that they are still separate?

setup a different user on the computer and make sure it has ADMIN rights Start>control panel>user accounts>manage accounts>Create new user, check the box for admin on a windows computer
and on a mack >system pref>user and Grps>+ for a new user and still make sure it has admin rights

PO with account assignment category K and use two cost center

Dear Experts
When I create a PO with account assignment category K and use two cost center in the account assigment tab of PO with the same GL or with different GL in the both line item, The FI document does not get posted.
Any input on this please.
Regards
Paul

Hi,
Check in the PO document - Item level - Delivery tab
There are two indicators
1. Good receipt
2. GR non-valuated.
If you are giving only one cost centre, only GR check box active and GR non-valuated check box is in-active. That's why System creating FI document during GR.
If you are giving two cost centres, Both GR check box and GR non-valuated check box are active. That's why System is not creating any FI documents during GR.
Regards
Ravi

LaCie 6TB drive ejects when Air sleeps: I use two 6TB LaCie drives - home and office with my Air, which travels with me. Only have a problem with one. Is there a fix?

LaCie 6TB drive ejects when Air sleeps: I use two 6TB LaCie drives - home and office with my Air, which travels with me between the locations. Only have a problem with one that inappropriately ejects when the Air sleeps (and only sometimes). Is there a fix? I've read others who believe that the problem is with the operating system (I'm using 10.9.2). But my problem suggests that it's with one of the LaCie's. Any suggestions about how to fix?

Lacie doesnt make HD, thats a Seagate inside the box.
Is there a fix?
Yes, get a 4TB max HD, 6TB drives are both new and have known issues, ...in fact so do most all 4TB drives.
my problem suggests that it's with one of the LaCie's
You mean Seagate
Large external hard drives are great! Large external hard drives are horrible
It is a common premise that people are overjoyed at the dropping prices per terabyte on external hard drives, and the first thing that enters most peoples minds is "great, I can put all my stuff on one drive,... all of it!" However considerations need to be made in creating a giant single choke point for not mere data loss, but seriously large data loss. If there is at the very least yet another redundant copy, this is fine, otherwise do not consider it whatsoever. Some 3TB and 4TB drives of all mfg. have, at the time of this writing, reliability concerns currently and best recommendation is staying at 2TB drives or less.
Advantages and disadvantages of larger 3TB and 4TB external drives must be weighed

Can I use two airports to use internet and listen to itunes in stereo? simultaneously?

Can I use two airports to use internet and listen to itunes in stereo? I just bought a second airport so I could listen to itunes & Pandora on my stereo. My problem is that I haven't been able to connect to both airports at once. I want to listen to the stereo (one airport) while using internet which is connected to a separate airport. Unfortunately, the stereo and ethernet cables are not close by which is why I bought the second airport.

You can run both simultaneously. You just need to reconfigure the base station that will be used for streaming as a wireless client.
I suggest that you start by performing a "factory default" reset on the 802.11n AirPort Express Base Station (AXn) to get it back to its "out-of-the-box" configuration. By default, the AXn will broadcast an unsecured wireless network with a Network Name of something like: Apple Network NNNNNN
After the reset has completed, plug the AXn into power, and then, verify from the iMac that this network shows up in the list of networks under the AirPort icon in the OS X menu bar.
Be sure to first switch the wireless network to the AirPort that will be used for streaming. Note: You will temporarily lose the Internet connection from your "main" AirPort. Then, run the AirPort Utility. The Utility should now find the streaming AXn. If not, use the Utility's "Configure Other" option under the File menu option in the Utility's menu bar. Enter 10.0.1.1 for the Address and "public" for the Password.
AirPort Utility > Select the AXn > Manual Setup > AirPort > Wireless
Wireless Mode: Join a wireless network
Network Name: <existing "main" AirPort's wireless network>
Wireless Security: <select the encryption type of the existing wireless network>
Wireless Password: <enter the existing wireless network password>
Verify Password: <re-enter the existing wireless network password>
AirPort Utility > Select the AXn > Manual Setup >Music
Enable AirPlay (checked)
iTunes Speaker Name: <enter desired speaker name>
iTunes Speaker Password: (optional)
Verify Password: (optional)
Click Update to write the new settings to the AX

Can i use two iclouds in two phones

Hi all
I m using two iphones which is 4s and 5c. Can I setup two iclouds in both sets separetly insted of using one icloud in two phones.

To migrate one of your phones along with a copy of your existing iCloud data to a new account, start by saving any photo stream photos you want to keep to your camera roll (unless already there) by opening your my photo stream album, tapping Select, tapping the photos, tap the share icon (box with upward facing arrow), then tapping Save to Camera Roll. If you are syncing notes with iCloud that you want to keep, you'll need to open each of your notes and email them to yourself so you can later copy and paste the text into new notes created in your new account. Then go to Settings>iCloud, tap Delete Account (which only deletes it from this device, not from iCloud), choose Keep on My iPhone and provide the password to turn off Find My iPhone. Then sign back in with a different Apple ID to create your new account and choose Merge to upload the data to the new account.

Is it possible to use two diff forms in same jsp/jsf page?

Hi all,
My requirement is to submit the form based on selection of radio button.
since half part needs to be jsp based which is not using any tags etc.
But i am trying to use some jsf based component which requires to be inside <f:view><h:form> of
<%@ taglib prefix="f" uri="http://java.sun.com/jsf/core" %>
<%@ taglib prefix="h" uri="http://java.sun.com/jsf/html" %>
i.e. some <c:comboBox>
</h:form> </f:view>
Now earlier i was submitting the form as
<form action="/techstacks-v2_1/reportAction.do" method="post" name=doSearch id='doSearch'>
But now i found, in order to use combo box component which is entirely jsf based i need to use <f:view><h:form> which is kind of taking over the previous form submission mechiansm.
I am trying to keep them separate as two differnt forms.
one entirely jsp based and other as jsf based.
Now my question is can i use such way of doing so or is there any better way of implementing so.
My friend suggested that i can pass the value of jsf based form in hidden form to a input box of form to be submitted finally instead of submitteing two diff forms.
but in that case also i ahev to use two forms in a single jsp/jsf page.
suggest me something which can really work out.
thanks
vijendra

You can use as many forms as you want as long as you don't nest forms. The HTML spec probibits that.

Can I use two 4GB SO DIMM DDRIII 1333 with my MacBook Pro Mid 2010???

Hello you guys.
I am working with a Mid 2010 Macbook Pro 2,53 GHz Intel Core i5, 4 GB 1067 MHz DDR3 an want to upgrade RAM to 8GB.
Can or should I use two 4GB SO DIMM DDRIII 1333 Units, or will that kill my Book and I better use two 1066 Units?
Can also someone recommend a fabric that works best?
Thanks in advance,
Philip (Germany)

Have just upgraded my Macbook Pro 6,2 from the original 4 GB to 8 GB. The replacement RAM specifies 1333 MHz on the box, together with a smiley Mac face, and it works great, although at the lower bus speed as you would expect.
This is what the vendor site states:
Strontium 4G Single Notebook SO Dimm DDR3 1333,204 Pins For Mac ( SRA4G86S1-H9H )
Memory Slots:
ECC:          Disabled
BANK 0/DIMM0:
Size:          4 GB
Type:          DDR3
Speed:          1067 MHz
Status:          OK
Manufacturer:          0x8783
Part Number:          0x5352413447383653312D4839482020202020
Serial Number:          0xED480B00
BANK 1/DIMM0:
Size:          4 GB
Type:          DDR3
Speed:          1067 MHz
Status:          OK
Manufacturer:          0x8783
Part Number:          0x5352413447383653312D4839482020202020
Serial Number:          0xC4450B00

Using Two JTextPanes to create an editor..help

Hi
I am writing a language editor ( english to native language). The editor would use the tranliteration. I need to make this both an application and an applet(for obvious reasons). Any suggestions on what container should be used? I am planning to use two text panes on a Frame? It this the right approach? The editor would have the standard features an editor has.Any examples to look at?
Thanks
kris

James
Thanks for responding
I need some direction here, the following is what i am trying to accomplish
have something like this
------------------------------------------------THIS IS FRAME----------
---------JTextPane1---------------------------------
| |
| |
| |
| |
| |
----------JTextPane2--------------------------------
| |
| |
| |
| |
| |
I will use the below box for entry in to english and above box for transliterated text, how do I get the text from box below to the box above(plain english would be ok right now). And WHY do I need a box?
Any code on how to do it is appreciated

Line of text in two rows in a check box

Greets
Ive been working in a poll, and i use a check box in some part, but de question its to long to put it in
i have the same problem with the text box, but with the command  it can be possible to put a long question in two rows, but that command line doesnt work with check boxes
there are any form to make a long question of one row, into a two row question in check box component??

There is a multiline button example you can adapt for checkboxes on my blog.
Alex Harui
Flex SDK Team
Adobe System, Inc.
http://blogs.adobe.com/aharui

I have an ipod and iPhone I've gone threw two off Brand chargers. They have just stopped working and have a little black mark on them. Please help me !

I have an iPod and an iPhone. I've gone threw two off brand chargers and they stopped working on me and have a black mark on them. Should I be considered about the mark, and should I get a charger made by Apple ?

What do yo mean by black mark?
Can you post a photo of the cable?
Frequently non-Apple cable are of poor quality and frequently fail.
Yes, get an Apple cable. I have been using the Lightning cable that came with my iPad 4 and 7G iPod Nano for over 2 and 1/2 years without problems

Can I use two airport extreme base station on the same network

Can I use two airport extreme base station on the same network

Here is my network setup:
D-Link DCM-202 simple cable modem (DOCSIS 2.0 compliant)
attached via ethernet to
5th generation AirPort Extreme Base Station - Main (Bought last week)
attached via ethernet to
4th generation AirPort Extreme Base Station - Remote (Bought about 11 months ago)
The main AEBS is set to:
AirPort Section:
Base Station Tab -> Allow setup over WAN is CHECKED
Wireless Tab -> Wireless Mode: Creat a Wireless Network, Radio Mode: 802.11a/n - 802.11b/g, Radio Channel Selection: Automatic, Wireless Security: WPA2 Personal
Internet Section:
Internet Connection Tab -> Connect Using: Ethernet, Ethernet WAN Port: Automatic (Default), Connection Sharing: Share a public IP address
TCP/IP Tab -> Configure IPv4: Using DHCP
DHCP Tab -> DHCP Beginning Address: 10.0.1.2, DHCP Ending Address: 10.0.1.200, DHCP Lease: 24 hrs
NAT Tab -> The box following 10.0.1. is left blank, Enable NAT Port Mapping Protocol box is CHECKED.
The remote AEBS is set to:
AirPort Section:
Base Station Tab -> Allow setup over WAN is CHECKED
Wireless Tab -> Wireless Mode: Creat a Wireless Network, Radio Mode: 802.11a/n - 802.11b/g, Radio Channel Selection: Automatic, Wireless Security: WPA2 Personal
Internet Section:
Internet Connection Tab -> Connect Using: Ethernet, Ethernet WAN Port: Automatic (Default), Connection Sharing: Off (Bridge Mode)
TCP/IP Tab -> Configure IPv4: Using DHCP, IP Address: 10.0.1.2, Subnet Mask: 255.255.255.0, Router Address: 10.0.1.1, DNS Server(s): 10.0.1.1 (Everything else under this tab is blank)
Hope this helps with info needed.

Using two BT Branded Youview Humax boxes

Similar Messages

Maybe you are looking for