Using two different versions of iMovie...Please help!!

I am new to using iMovie and need to know whether it is possible to jump between two different versions of iMovie on two different computers. I have created my movie on a computer using a higher version and need to put it onto a computer using a lower version of iMovie. Is it possible to do this without any problems? Thanks!!

Hi newvopo,
welcome to this forum
it is recommended to stay within one version of iM while working on a project (no updates/no "file sharing"); many/all (?) iM versions are not down-compatible, e.g. iMHD has a different file-management then the versions before, or iM6 has totally new effects, transistions, not supported by any other version...
you haven't told us, which two version you like to use...
besides:
you help yourself by giving us as much info about your Mac and apps as possible... use My Profile to add info....
recommendation:
export your movie done so far back to tape, import into the older version of iM on other machine.......

Similar Messages

How to use two different versions of Firefox at the same time on Snow Leopard?

I recently upgraded to Firefox 4.0 on my 27" iMac running Snow Leopard 10.6.7.
Previously, I was using Google's "Page Speed" along with Firebug in Firefox 3.6.15 to optimize images in my web pages, and to find other areas to optimize.
Page Speed is not yet compatible with Firefox 4.0. I wrote to Google about this some time ago -- no answer yet.
If I run Firefox 3.6.15 in order to use Page Speed, I run into a few problems afterward when I start using Firefox 4.0 again, since they both use the same "Firefox" folder in my "Application Support" folder.
How can I set it up so that I can have two separate "Firefox" folders in my "Application Support" folder?
Or is there an easier way to use two different versions of Firefox simultaneously, even if one has extensions and/or plug-ins installed which are not compatible with the other version?
Thanks for a great browser!

Please disregard my question. I just conducted more web search and learned how to use Firefox's profile manager in order to make a separate profile for Firefox 3.6.15.
You can find instructions on this page:
http://support.mozilla.com/en-US/kb/Managing%20profiles#os=mac&browser=fx35
'''A small tip:'''
If your Firefox app is named anything other than "Firefox" -- say for example "Firefox 3.6.15" -- when you follow the instructions at the above link, make sure you escape the blank space that is before the version number by adding a backward slash before it, when you type the command string in the Terminal. In other words, in that string, you should use this:
Firefox\ 3.6.15
I hope that helps someone.
WW

How to use two different versions of the same jar within one project

Hi everybody!
I have a big problem while integrating different web service clients within one bigger java project. Both implemetations need some jar files to work but demand different version. So, i would like to know if there is any way to tell which implementation should use which version! Anyhow i add those jars to the classpath makes working only one or the other webservice working but never both! Any ideas somebody?
Best regrads,
Stefan G�tz

Of course do have the jar files different names but the classes inside of them are the same ... means that the standard system classloader can distinguish them. When you add a jar to a classpath the name actually dosent matter.... any other ideas, please?
PD.: i tryed to add a manifest file to the one jar which makes use of one of the dublicated jars to specify which jar to take direcly but it makes no difference since once classes loaded they cant be distinguish ....see:
http://java.sun.com/docs/books/tutorial/ext/basics/load.html

I have to use two different versions of Firefox for two different employers - How to install new version without losing old one?

One employer requires that I use Firefox 3. Another requires that I use the newest version. How do I install a new version Firefox to a different path without over-writing the old version?

The easiest way it to have one version be a Firefox Portable installation. The Portable installation is self-contained and won't affect your "regular" Firefox installation.<br />
http://portableapps.com/apps/internet/firefox_portable
Otherwise you need to set up a Profile specifically for the 2nd version and make sure the correct Profile is launched with each version. <br />
[http://support.mozilla.com/en-US/kb/Managing+Profiles] <br />
http://kb.mozillazine.org/Shortcut_to_a_specific_profile
Overall you are probably better off replacing your current Firefox 3.6.25 version with the Portable Apps version - http://portableapps.com/apps/internet/firefox_portable/localization#legacy36 - and install Firefox 9.0.1 as your "regular" installation.

Using two different versions of Flash Player

While I realize that Flash Player is up to 10. something and a security update is available for it, one program I use over the net will not recognize anything over version 9x. It seems like that internet application has trouble with version numbers over 1 initial digit. Thus 5.x, 6.x, up to 9.x is recognized fine, but 10.x is not!
So, my question is: While I would like to run the latest version of flash player with the security update, unless I can run version 9 or lower on the same computer, I will not be able to run verison 10 since I really need that program that only recognizes up to 9. IS IT possible to have both versions on the same computer and if so, how would one direct the computer to use the lower one when necessary?

We're sorry to hear that your Firefox seems to be crashing when you open it. Please perform the following steps to give us a crash report ID that helps us find out more about the cause of the crash.
#Press the following shortcut to get a Run window: [Windows] + [R]. This should bring up a window that contains a text field.
#In that text field, enter %APPDATA% and press Enter. An explorer window should open.
#From that explorer window, double-click on the ''Mozilla'' folder, then double-click on ''Firefox'' and then on ''Crash reports''. Double-click on ''submitted''.
#Now, you should see a list of files that contain reports. Go to ''View'' > ''Arrange Icons by'' > ''Modified'' to get the most recent files at the top of the window.
#Open the most recent 5 files with a text editor and copy the IDs.
#Paste each ID with '''bp-''' into the reply window on the forums.
Thanks in advance!
You can find more information and troubleshooting steps in the [[Firefox crashes]] article.

How can I run two different versions of Firefox, the latest does not work with an important site I need to use?

With the latest version of Firefox I cannot send "Quick Mails" to my students using the college's ANGEL system. I had to uninstall it and go to an earlier version. I prefer the newest rev.
Any way to run two different versions. It does not have to be simultaniously. Seems to be a problem on both my Mac and XP systems.
Thanks,
Kim

Currently I don't think there is a way to run two version of firefox at the same time. But you can install Firefox Beta or Aurora instead (which is build for future release for firefox) and help test it! Here's the link:
http://www.mozilla.org/en-US/firefox/channel/

SLI - Can I use two different video card versions for SLI?

Hello,
Can I use two different generations of MSI video cards that implement the same GPU for SLI?
The two video cards are:
MSI N260GTX-T2D896-OCv2 GeForce GTX 260 896MB <-- What I currently have
MSI N260GTX-T2D896-OCv3 GeForce GTX 260 896MB
MSI N260GTX-T2D896-OCv4 GeForce GTX 260 896MB
The main difference between these three seems to be that the OCv3 has two fans and a different heatsink than the OCv2. The OCv4 has one fan like the OCv2 and but it is located in a different location and some weird spikey heatsink thing going on. I already have the OCv2 but I am looking to get another card for SLI and newegg doesn't sell the OCv2 anymore. The important thing is that I am looking for is stability and it seems that the most ideal setup would be to get identical cards.
By the way, why are there so many versions (updates?) to this card? Have there been issues related to the card that necessitate a revision?
Thanks

Different coolers(HS and fans) and possibly different makers of vRAM. But, you should be able to run SLI without issues regardless of the versions.

Hotsync two different Palms that use a different version of Palm Desktop

What I need to know is I have a Palm IIIe & a Palm Zire 31 both of which use a different version of Palm Destop can a install both versions of Palm Desktop on a single computer and then be able to hotsync both devices. Or will both of them hotsync with the same version of Palm Desktop.
Palm Desktop 4.1.4e for the Palm Zire 31
Palm Desktop 4.1.4 for the Palm IIIe
Post relates to: Zire 31
This question was solved.
View Solution.

Hello obsolete.
I haven't tried your specific combination of devices before, but I think it should work. I would install Palm Desktop 4.1.4 and then sync the Palm IIIe first. Once you know that the Palm IIIe is syncing normally, I would then install Palm Desktop 4.1.4e on top of 4.1.4, upgrading it. Then sync the Palm IIIe to make sure it is still working. If it is, then attempt to sync your Zire 31.
Since you will be syncing two devices to the same computer, I recommend that each device have it's own unique HotSync ID to prevent things from going bad on you.
Alan G

How to use two different accounts in iTunes

I have purchased apps under two different email accounts and I am now unable to use the initial account. Having deleted some apps because of problems, I am recharged for the apps because apple will not accept the original password and user name. When I try to add it to my apple account, I get a message that this particular user name is already in use. (yes, by me!) Please help.

Contact Apple about your iTunes accounts and maybe they can combine the two.
http://www.apple.com/support/itunes/contact/

Can I use two different devices with different apple ID for backing up data on one machine without losing any data that was backed up with one device earlier?

Can I use two different devices with different apple ID for backing up data on one machine without losing any data that was backed up with one device earlier?

The link is to a discussion started on 12/18 in the FiOS Internet forum. Here's the link I get now, however it is different than the link I pulled a few hours ago. If this system changes the link again, it may not work.
http://forums.verizon.com/t5/FiOS-Internet/Frustration-and-just-confused-with-internet-help-please/t...
You can also look for the topic, "frustration and just confused" in the FiOS Internet forum.
Here's a link that is in the thread that gives more detail.
https://secure.dslreports.com/faq/15984
Good Luck!
P.S. "Copper Contributor" is my "rank." gs0b is my user name.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

How Can i Use two Different Public IP Addresses no my DMZ with ASA Firewall.

How To Using Two Different Public IP Address on My DMZ with ASA 5520
Postado por jorge decimo decimo em 28/Jan/2013 5:51:28
Hi everyone out there.
can any one please help me regarding this situation that im looking for a solution
My old range of public ip address are finished, i mean (the 41.x.x.0 range)
So now i still need to have in my DMZ another two servers that will bring some new services.
Remember that those two server, will need to be accessable both from inside and from outside users (Internet users) as well.
So as i said, my old range of public ip address is finished and we asked the ISP to gives some additional public
ip address to address the need of the two new servers on DMZ. and the ISP gave us the range of 197.216.1.24/29
So my quation is, on reall time world (on the equipment) how can i Use two different public ip address on the same DMZ
on Cisco ASA 5520 v8??
How my configuration should look like?
I was told about implementing static nat with Sub Interfaces on both Router and ASA interface
Can someone please do give me a help with a practical config sample please. i can as well be reached at [email protected]
attached is my network diagram for a better understanding
I thank every body in advance
Jorge

Hi,
So looking at your picture you have the original public IP address range configured on the OUTSIDE and its used for NAT for different servers behind the ASA firewall.
Now you have gotten a new public IP address range from the ISP and want to get it into use.
How do you want to use this IP address range? You want to configure the public IP addresses directly on the servers or NAT them at the ASA and have private IP addresses on the actual servers (like it seems to be for the current server)?
To get the routing working naturally the only thing needed between your Router and Firewall would be to have a static route for the new public network range pointing towards your ASA OUTSIDE IP address. The routing between your Router and the ISP core could either be handled with Static Routing or Dynamic Routing.
So you dont really need to change the interface configuration between the Router and ASA at all. You just need a Static route pointing the new public IP address towards the ASA outside IP address.
Now when the routing is handled between the ISP - ISP/Your Router - Your Firewall, you can then consider how to use those IP addresses.
Do you want to use the public IP addresses DIRECTLY on the HOSTS behind the firewall?This would require you to either configure a new physical interface with the new public IP address range OR create a new subinterface with the new public IP addresses range AND then configure the LAN devices correspondingly to the chosen method on the firewall
Do you want to use the public IP addresses DIRECLTY on the ASA OUTSIDE as NAT IP addresses?This would require for you to only start configuring Static NAT for the new servers between the inside/dmz and outside interface of the ASA. The format would be no different from the previous NAT configuration other than for the different IP addresses ofcourse
Of the above ways
The first way is good because the actual hosts will have the public IP addresses. Therefore you wont run into problems with DNS when the LAN users are trying to access the server.
The second way is the one requiring the least amount of configurations/changes on the ASA. In this case though you might run into problem with DNS (to which I refer above) as the server actually has a private IP address but the public DNS might reply to the LAN hosts with a public IP address and therefore connections from LAN could fail. This is because LAN users cant connect to the servers OUTSIDE NAT IP address (unless you NAT the server to public IP address towards LAN also)
Hopefully the above was helpfull. Naturally ask more specific questions and I'll answer them. Hopefully I didnt miss something. But please ask more
I'm currently at Cisco Live! 2013 London so in the "worst case" I might be able to answer on the weekend at earliest.
- Jouni

Warning a client is using a different version of the ormi protocol 1.3 != 1

Hi All,
I am trying to access a bpel process deployed on 10.1.2.0.2 bpel process manager via java client. I am getting the below error on the bpel process manager as,
Warning a client is using a different version of the ormi protocol 1.3 != 1.1
I am using the following jars at client side,
ejb.jar
oc4jclient.jar
oc4j-internal.jar
optic.jar
orabpel.jar
orabpel-common.jar
xmlparserv2.jar
Can you please help me to solve this issue.
Appreciate your help!.
Thanks,
Levey

I believe there is a patch available, which allows cross version ORMI compatibility, which needs to be applied to the 10.1.2 release:
http://download-west.oracle.com/docs/cd/B25221_04/web.1013/b14427/rmi.htm#JISVC6301
-steve-

Can I configure my network settings to use two different proxy configurations?

At work, I have a proxy server, but away I do not. I would like the correct proxy settings to load in each case. Currently, I use two different locations. This works acceptably, but I have to open my network settings and manually switch locations when my location changes. I have experimented with creating multiple ethernet ports. I can create a location with two ethernet ports, but I can't find a way to cause the correct one to activate. The first port in the search order is loaded even if the proxy is not found.
Please let me know if you can help with this. Thank you.

I'm not sure of another way to do what you want, but there should be a Location menu in the Apple menu. You don't need to open the network prefs to change locations.

How can i deploy two different versions of the same application on the same server??

I have two different versions of an application. One is a released version. And another version under development. I need to port this version of the application to the same server. I'm using the same classes and packages(except for some new ones). Is it sufficient if i change the name of my ear(application name). Or should i change my code also.

Hi
You can repackage the new versions of ear,jar and war with different names. I hope that should work well.
Cheers
-pradeep

Use two different printer services in one web template?

Hi!
Is it possible to use two different help services for printing in the same web template (for the same table item)?
Print1:
<param name="HELP_SERVICE" value="HELP_SERVICE_PRINT"/>
<param name="HELP_SERVICE_CLASS" value="ZCL_RSR_XLS_HELP_WINDOW_PRINT"/>
Print 2:
<param name="HELP_SERVICE" value="ZPRINTING"/>
<param name="HELP_SERVICE_CLASS" value="ZBW_PRINT_HELP_SERVICE"/>
I was thinking that you maybe could change the param name values for the "Help_service" and the "help_service_class" at runtime using the properties for the table item, so that you could choose which one to use, but I havne't been able to do that so far.
Does anyone have an idea?

This is not a problem. Just put the print service for the print to excel on an object other than the table web item. As long as these print services exist on any web item, you should be able to invoke them. I've tested this with putting the "Print with Excel" service on the Navigation Block Web Item and the other print service on the table web item. Hope that helps!
Prakash

Using two different versions of iMovie...Please help!!

Similar Messages

Maybe you are looking for