Using two external displays that are NOT mirrored

i have a MBP early 2008, meaning the external display port is a dual DVI-I port. I have have two external displays, both samsung syncmaster xl2370 with native resolution 1920x1080. i have a dual dvi-i to vga splitter. when i connect both displays, they mirror one another, which is not what i want. rather, i want to have my MBP display, and two external displays that are not mirror images of one another. according to apple, if i buy a dual dvi-i to dvi splitter, i get the same effect. i've read on various forums about hardware alternatives, like buying a usb to dvi or usb to vga adapter, with some reasonable results (except a bit of sluggishness). the best one seems to be the diamond: http://www.diamondmm.com/BVU195.php
it mostly gets good reviews, but is sluggish. does any know of any better options?
many thanks, jovo

Welcome to Apple Discussions!
USB is slow partly because it is processor and driver dependent. Best to go with a straight video solution, such as Matroxes products like this one: http://www.matrox.com/graphics/en/products/gxm/dh2go/

Similar Messages

How tow connect two external displays that are not mirrored and turn of the retina display

Hello,
I have two questions:
1. Is it possible to use two external displays either mirrored or not and turn off the retina display, and if so how it is done?
2. Is it possible to close the MBP and use an external keyboard while using two external displays?
I am using a music production DAW Persons Studio One-2 Pro and it would be great to be able to have this type of a setup.
Thank You,
Breezinabout
Macbook Pro 15" Retina display I7 2,3mz 500gb SSD late 2013 OSX Yosemite 10.10.1

Hi Breezinabout,
The MacBook Pro Late 2013 retina display model will support two external displays. See this specifications page for reference -
MacBook Pro (Retina, 15-inch, Late 2013) - Technical Specifications
Specifically -
Dual display and video mirroring: Simultaneously supports full native resolution on the built-in display and up to 2560 by 1600 pixels on up to two external displays, both at millions of colors
And -
Thunderbolt digital video output
Native Mini DisplayPort output
DVI output using Mini DisplayPort to DVI Adapter (sold separately)
VGA output using Mini DisplayPort to VGA Adapter (sold separately)
Dual-link DVI output using Mini DisplayPort to Dual-Link DVI Adapter (sold separately)
HDMI video output
Support for 1080p resolution at up to 60Hz
Support for 3840-by-2160 resolution at 30Hz
Support for 4096-by-2160 resolution at 24Hz
You would, if you wish, turn off the internal display by closing the MacBook Pro, which is called "closed-clamshell" mode. It requires you to have an external keyboard and mouse. See this article for further information -
How to use your Mac notebook computer in closed-clamshell (display closed) mode with an external display - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L

Two external hard drive are not appearing on the desktop anymore on my 2008 24" iMac. One is a Lacie d2 Quadra and the other is a G Drive. Both are 1 Tb

Two external hard drive are not appearing on the desktop anymore on my 2008 24" iMac. One is a Lacie d2 Quadra and the other is a G Drive. Both are 1 Tb

Are they daisy chained? Have you tried them one at a time? Have you tried a different FireWire cable? Do they show up in either system profiler or Disk Utility? Have you reset the SMC? http://support.apple.com/kb/HT3964

I have a Macbook and an external display that will not connect.

I bought a Mini DisplayPort to VGA adaptor from Apple but the Detect Displays under system set up does not recognize my external display. The Mini Display port doesn't fit into the port on my Macbook with the Display printed above it but into "Y" port. The picture on the package for the adaptor matches the ends of the adaptor, but they don't seem to fit where they should.
Is that the issue or is there something else?

Hardware Overview:
Model Name: MacBook
Model Identifier: MacBook4,1
Thank you. I didn't know where to look for that information.

Microsoft Band adding some tiles using Health app displays "Notifications are not supported in this version of Windows Phone"

Adding some tiles to my Band shows the 'Notifications are not supported in this version of Windows Phone' error.
The affected tiles include calls, mail, Facebook, Cortana and Facebook messenger. My Lumia 1520 is running on the latest version of WP8.1 Preview for Developers. Why is this the case?

Never mind. It's actually working now.
The health app wasn't presenting me with a request to access notifications. Strangely on the 4th or 5th time opening the app it did.

How do you setup a server to use multiple DNS servers that are not connect to each other?

Is there a way to setup a server that connects to two different domains to use the proper DNS server for name resolution?
Let say there are two DCs: serverA.subdomaina.domain.com and serverB.subdoamainb.domain.com. The domains are independent and not connected. Now you need a common server that is connected to both and need to resolve names from both
domains.
Is this possible?
I have setup a server in a workgroup. One NIC has the subdomaina.domain.com connection specific suffix and the other nic has the subdomainb.domain.com. Each NIC has the DNS server listed for the domain it is connected to.
This configuration will resolve FQDNs of one domain but not the other. This I believe is due to the fact the server only querys one DNS server and doesn't try the other DNS server.
Is there any way to make the server try another DNS server, if the first one doesn't have the entry?

Hi,
Thank you for posting in Windows Server Forum.
Here adding to the words of “Tim”, a forwarder is a DNS server on a network used to forward DNS queries for external DNS names to DNS servers outside of that network. You can also forward queries according to specific domain names using conditional forwarders.
A DNS server on a network is designated as a forwarder by having the other DNS servers in the network forward the queries they cannot resolve locally to that DNS server. You can refer information regarding forwarders and how to configure from beneath link.
Understanding forwarders
http://technet.microsoft.com/en-us/library/cc782142(v=ws.10).aspx
Configure a DNS Server to Use Forwarders
http://technet.microsoft.com/en-us/library/cc754941.aspx
Hope it helps!
Regards.

What is the best way to use two external displays at the same time?

One of my displays has HDMI, DVI, and VGA inputs. The other has VGA and DVI inputs.
MBP, early 2011
Mac OS X 10.6.7
2.4 GHz Intel Core i5

Kappy is dead on correct about Bridge Mode as a requirement for the Time Capsule.
Do you know how to check to see if the Time Capsule is configured this way?
Next question.....you really should not try to have two wireless networks....one Arris and another Time Capsule.....unless it is absolutely necessary. Two wireless routers in close proximity can create wireless interference effects that can cause problems with either...or both...networks.
Best to turn off the wireless on one router to keep the chances of wireless interference between routers minimized.
Are both the Arris and Time Capsule providing wireless signals?

Adobe XI freezes or crashes when using two pdf documents that are open at the same time?

I have run all the updates, taken it off protected mode.........

Hi dojbuckley,
Are you performing edit operations on both the pdf's simultaneously?
Is Acrobat 11 updated to v11.0.7?
Regards,
Rave

I have app updates for two other accounts that are not mine

How do I get rid of the updates as they obviously aren't mine.

Do a search in this forum for getting rid of pirated apps. Pirated apps are causing this issue for you.

I have two add-ons that are enabled AND working but they are their icons are not displaying.

I have Firebug and Adblock-Plus on my Firefox browser that are not displaying their normal shortcut buttons next to the search bar of Firefox. They were displaying fine yesterday, now today they are not displaying at all. They are installed and enabled. There were no changes on my end (user end), that could explain this occurrence. No new addons installed. No new plugins. Any help would be grateful.

I have Firebug and am on Ubuntu at present, so my options may differ slightly from Windows, and over time the Firebug options probably have changed.
If you reset the toolbars to default settings by resetting localstore.rdf you may need to make some changes to recreate whatever you had before.
I may display a full Firebug toolbar with keyboard key F12. That toolbar includes several display options from clicking the firebug icon. I also have Firebug showing as an option from
* Tools -> WebDeveloper -> Firebug.
If I use the customise toolbars option; for example from right clicking an empty space on a toolbar; the palette of icons includes one for Firebug that I may place where I like. If you try to create a custom toolbar remember it needs to be populated, if it has nothing on it it will not display.
P.S.
Presumably you are able to use Firebug, it is just an icon that you are missing ? is that correct ?

I can no longer shoot directly into phaseone software since i use my new macbook pro with retina display. pictures are not transfered from the camera into captureone. anyone else with this problem? any solutions?

i can no longer shoot directly into phaseone software - neihter version 6 or 7 - since i use my new macbook pro with retina display. pictures are not transfered from the camera into captureone. anyone else with this problem? any solutions?

My eyes just glazed over...Please in the future break down each of your issues with paragraphs separated by two carriage returns. It would be much easier when trying to address your issues.
Go to Apple menu -> System Preferences -> Keyboard and Mouse -> Mouse
And edit your mouse settings to do what you want it to do.
Secondly, this is not the place to vent. If you have a complaint, there is:
http://www.apple.com/feedback/
or http://www.apple.com/contact/
We are just end users here helping other end users.
Third, from my understanding, it would appear you are concerned about the noise the hard drive makes when it falls asleep? Why not put your machine in screen saver mode instead? Apple menu -> System Preferences -> Energy Saver turn off all Energy Saver settings, or set them to run Never.
Fourth, if your machine was purchased just a few days ago, you may still be able to get an exchange from the store, quicker than you can get a repair done. You may want to look into that possibility.
Fifth, it does appear you found the Logic forum. I would persist in asking there how to solve your technical issue with Logic regarding the audio. It may be you don't have to do anything special to the hard drive. Remember audio can be transmitted by wire, avoiding ambient sounds.
Good luck!

How do you add/use typekit fonts that are not edge web fonts?

I am just trying out the new Muse CC 2014.1 (August) release and was keen to try the new font facilities. As far as I can see that while I can now add other fonts for which I have downloaded web font files via the Self Hosted Web Fonts function, Typekit fonts that are not "Adobe Edge Web Fonts" are effectively unavailable? Have I missed something.
As an example I want to use the Proxima Nova web font family. I have selected it on the type kit site, set them up to Sync via my Creative Cloud account. So for example if I select a font in Photoshop CC or Illustrator, the Proxima Nova fonts appear. Even ok in Word for Mac. They do not appear in Muse.
To add them as self hosted web fonts, I would need to physically download the relevant fonts files and install them on my desktop using the OS-X font tool. However as they are being sync'd via Creative Cloud this shouldn't be necessary should it? Also I don't see an option for doing so on the typekit site.
Any help or guidance would be very welcome.
PS: I seem to have a separate issue with the Creative Cloud app, which is not listing fonts under the Assets tab. But I don't think that is related as they are working fine for Photoshop, etc.

Hi David,
I'm sorry that you ran into trouble with this. To add fonts from Typekit to your Muse website, you will want to use the web fonts path instead of desktop fonts. (You can use a desktop font synced from Typekit in your Muse design, but it will exported as an image the same as any other system font.)
There are a couple options for using Typekit web fonts in Muse:
o) The Muse Insider wrote a post on how to insert the Typekit embed code from the Muse interface:
http://museinsider.com/how-to-add-typekit-fonts-to-your-muse-site.html
o) Or you can add the embed code to the Page Properties dialog within Muse, which will include it in the <head> of the page when you export your website. The steps are the same as this tutorial, but you will add the Typekit embed code to Muse instead of into your page directly:
TYPEKIT | Adding fonts to your site
Note that in either case the Typekit fonts will not be displayed in the Muse preview window. You'll need to publish your site to a server in order for the Typekit fonts to be loaded into the page.
If those look like more coding that you are comfortable with, you might try one of the fonts which you can select from the font menu instead. Here are some that are similar to :
https://edgewebfonts.adobe.com/fonts#/?xHeight=high&contrast=low&class=sans-serif&width=re gular
We are also working on a more complete integration of Typekit with Muse in the future, but I can't say yet when that will be available.
>> PS: I seem to have a separate issue with the Creative Cloud app, which is not listing fonts under the Assets tab. But I don't think that is related as they are working fine for Photoshop, etc.
Do you see a "loading" icon in the tab (e.g. a blue spinner wheel)? It sounds similar to this thread; you might try these suggestions:
Re: Adobe Creative Cloud / Desktop App / Home Screen: Constant Spinning Wheel
I hope that this helps; let me know if you have any other questions. Best,
-- liz

HT2275 Do I need to choose "Share this printer on the network" for printers that are not connected directly to my MacBook Pro? I have two HP printers connected to an Airport Extreme (WiFi turned off). I connect by WiFi to another Airport Extreme w cable t

I have three Airport Extreme (AE) routers in my home network.
The main AE is set up for wifi access. The other two are connected by ethernet cables to the main AE. My MacBook Pro connects to the network wirelessly through the main AE. The AE in my office has two HP printers connected to it by ethernet cables. I have a Kodak All-in-one that is connected by USB to my MacBook Pro.
I reset my printer connections on my MacBook Pro and had to add all the printers back to my printer list. I don't know if I understand what the checkbox "Share this printer on the network" in the Print & Fax System Preferences window is for. My guess is that I don't need to share printers unless they are connected to my MacBook Pro by USB, so I should uncheck the "Share this printer on the network" box for the two HP printers that are connected to the AE. I print to them over the network, but they're not connected directly to any computer. I thought if my MacBook Pro wasset to share them and was shutdown, the printers might not be available to my Mac mini or Dell PC, which connect by ethernet to the office AE (which has the two printers connected to it).
What should I do?
For printers connected directly to a Mac (or PC) by USB, check the "Share this printer on the network" box? In my Sharing Preferences, I check "Share Printers."
For printers connected to the AE by ethernet, UNcheck the "Share this printer on the network" box on my Macs (& PCs?) when I add the printers to my printer list? In my Sharing Preferences, I UNcheck "Share Printers?"
FYI
HP LaserJet Firmware Update Utility for HP P2035n is available
Version: 20120105 (19 Mar 2012)
Operating System(s): Mac OS X, Mac OS X 10.5, Mac OS X 10.6, Mac OS X 10.7
File name: P2035_FW_Update_Utility_20120105_v1_4.dmg (3.8 MB)
line: <http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en &cc=us&prodTypeId=18972&prodSeriesId=3662025&prodNameId=3662049&swEnvOID=219&swL ang=8&mode=2&taskId=135&swItem=lj-94537-3>

Question is - will the 2 networks (using auto channel negotiations) exist well in the same house or will there be interference?
Things will be fine since the AirPort Express or AirPort Extreme will automatically search for a good wireless channel. If you assign a separate name for the wireless network, then devices will need to log in separately to this network. The extending device will need to be configured in Bridge Mode.
My suggestion would be to configure what is known as a "roaming" network in your question #2. In this case, you would assign the same wireless network name, security and password settings to the extending device and configure it in Bridge Mode.
The advantage to #2 is that you will be able to walk your laptop from a location near the Time Capsule and as you move close to the extending device, the laptop will automatically switch to pick up the stronger signal from the extending AirPort.
You are actually creating a separate network in #2, so you have the advantage of maximum bandwidth for both the TC network and the AirPort network.
Question - does the Airport Express have to be directly connected to the TC or can that connected be through a switched network?
I'm assuming that you are asking about an Ethernet switch here, correct? The AirPort Express or AirPort Extreme can connect to the Ethernet switch, or directly back to a LAN port on the Time Capsule, whichever is easier to setup.
Question 2 - assuming I can connect the Airport Express to the TC over a switched network, will "extending" the network using the Ethernet network still reduce my overall wireless bandwidth?
Connecting the remote device using Ethernet is by far the best way to extend a wireless network because it maintains maximum bandwidth on the network. This is the way that any good commercial network is designed.
Post back if you need any tips to get things setup.

Using custom classes that are not beans

Hi folks,
Is it possible to use java classes that are not beans. I mean, on a page, could you say Customer cust = new Customer("Jones", 25);
if you had a Customer class with a constructor that took a name and age (String and int).
If so, how do you go about this- do you need to import the class, or put it in a standard location? I'm using Tomcat, and would guess that this would go in WEB-INF/classes?
I hope it's not a stupid question, all the literature seems to be focused on JavaBeans
Any advice on this would be great!

Beans are used as putting Java code into a JSP is generally considered bad practice. The advantage of the bean pattern is that you use things like:
<jsp:setProperty name="laBean" property="someSetter" value="someValue" />so that you aren't embedding Java directly into the JSP. I'm not very religious about this particular topic personally and will throw a line or two in here and there.
Having said that though, you can easily use any Java class in a JSP. You'll have to import it first:
<%@ page import="java.util.*" %>And then you can easily use it like in a real Java program.

I've been given under warranty what us supposed to be a new iPhone 5. When I try and restore it from my iCloud it keeps asking me to sign in with two other Apple ID's that are not know to me. Why is this?

I've been given under warranty what us supposed to be a new iPhone 5. When I try and restore it from my iCloud it keeps asking me to sign in with two other Apple ID's that are not know to me. Why is this?

Adding to KC7GNM's remark (with which I agree), the iPhone 5 you received is very likely refurbished. It is not brand new out-of-the-box, never before used.

Using two external displays that are NOT mirrored

Similar Messages

Maybe you are looking for