Using Two-Phase Commits and Data Sources does not work with OCI

Hi,
i tried to configure 2pc with OCI.
when i use thin like shown in :
http://download-west.oracle.com/docs/cd/B14099_19/web.1012/b14012/datasrc.htm#sthref578
everything works.
If i change the url from thin -> oci
the transaction is rolled back.
The documentation says
http://download-west.oracle.com/docs/cd/B14099_19/web.1012/b14012/datasrc.htm#i1085507
for using oci. But if i use this in thin mode, it breaks even the thin mode.... ;-(
Can anybody help?

It is fixed in 10.1.3

Similar Messages

Selection in the Generic Data Source does not work

Hi gurus,
I have some problem with the selection in the Generic Data Source.
I have created a view as a base of a Generic Data Source.
This view is based on several table; i.e.: VBUK-VBELN (Sales Order number), VBAP-ERDAT (creation date of Sales Order), VBAP-POSNR (Sales order item), VBAK-BSTNK (Customer Purchase order number).
In the view, some join conditions have been defined: VBUK-VBELN = VBAK-VBELN, VBUK-VBLN = VBAP-VBELN.
I want to extract the Sales Order number, Sales order item and Customer Purchase order number for the Sales order created on the previous year.
On the Generic Data Source, I select VBELN (Sales order number) and ERDAT (creation date of sales order) as selection.
However, when I run the extractor checker (RSA3) on this Generic Data Source, the selection does not work at all, i.e.:
eventhough I restricted the Sales order number and/or the creation date of sales order, the generic data source ignores the selection criteria and extract ALL data.
Does anyone ever have similar problem? Did I miss some step in the Generic DAta Source creation? How to fix this problem?
Thanks a lot in advance.
Best regards,
Fen

Hi Fen,
Just check what is the output you get for the same selection for the view you created.
Bye
Dinesh

Emagic mt4 and intel iMac does not work with 10.4.5

Hi there,
after updating my iMac on 10.4.5 my MT4 does not work any longer. It is still shown in the system profiler! But that`s it! After I`ve installed the latest driver (emagic v1.7), it was not shown in the audio/midi preferences. On my G4 with 10.3.9 it is still working properly. I have tried to use it with Garage Band 3, while I am waiting for Logic Pro 7.2 . It worked in the begining, but now the USB connection on the MT4 does not light up, but the midi devices. My question is: Do I need a driver using Logic Pro 7.2 with an Intel iMac? Includes the update the driver for Emagic MT4?
thanks a lot for any reply, experiences and clues
jay markus
iMac Intel core 20'' Mac OS X (10.4.5)

Hi Glyn,
I will try to get some driver information of apple. Emagic is apple now, so who else could that know?! I use an m-audio fw audio-interface. For that m-audio got a driver and it works by now. Fortunately! I will tell you if apple got a clue.
Thanks for reply ( So I am not the only one in universe with that problem!)
Best regards
Jay
iMac Intel core 20'' Mac OS X (10.4.5)

My ipod 4g is disabled and my laptop has crashed.i am using a new laptop and it(laptop) is not working with the ipod in order for it to be working again(ipod). what should i do??

Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Also:
If you don't have access to a computer
If you are using Find My iPhone, you can use Remote Wipe to restore your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode.

DAC - Reset Data Sources does not work properly

Hi,
I am trying to run a full load by selecting Reset Data Sources in DAC. However, when i select this option, only the data after Jan 11, 2014 gets picked up in the ETL. I have data starting from year 2010 in my database.
How do i ensure that the full set of data gets picked up for full load?

Hi Srini,
The value of INITIAL EXTRACT DATE is as follows:
$$INITIAL_EXTRACT_DATE
Timestamp
Value=19700101 at 00:00:00:00_dac_sep_Formatter=MM/DD/YYYY_dac_sep_Function=TO_CUSTOM_dac_sep_Runtime=Static
How does this work? Actually this was working fine for DAC 10g and the client was able to perform full loads by resetting the data sources.
What could be the issue with DAC 11g?

Two step verification in Canada SMS does not work with Telus

Just saw the announcement that Two step verification for your Apple account is now available to Canada.
http://www.macnn.com/articles/13/05/10/option.will.appear.automatically.in.accou nt.details/
Tried to sign up, unfortunately after many attempts and testing with a few different phones it appears that Apples SMS server is not connected with Telus mobility as the messages never come through to any of my phones on the Telus network.
So maybe the announcement is a little premature.

False start.
The option to sign up for two step verification has now been removed again.
I guess they have to get the SMS feature working first.
Here is a request. Apple can you implement the industry standard time based authentication protocol:
http://en.wikipedia.org/wiki/Time-based_One-time_Password_Algorithm
http://tools.ietf.org/html/rfc6238
Same one is being used by:
Google
Dropbox
Lastpass
Microsoft
Amazon AWS
Then you can use one of the many apps available for smartphones and support users who want something secure but that does not require SMS or an apple hardware device to login to their apple id.

Airplay and home sharing does not work with my 2nd gen apple tv

though my 2nd gen apple tv with version 7 and my iphone 4s with ios 8.0.2 are connected to the same wifi network, airplay and home sharing doesnt show up in my itunes nor in my phone! what should i do?

Hello there, Ashwin.
The following Knowledge Base articles offers up some great steps for troubleshooting issues with both AirPlay and Home Sharing, respectively:
Resolve issues with AirPlay and AirPlay Mirroring from iPhone, iPad, and iPod touch
http://support.apple.com/kb/ts4215
and
Troubleshooting Home Sharing
http://support.apple.com/kb/ts2972
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

I installed a new bigger hard drive and now spotlight does not work with outlook to search for emails

My old hard drive was full so I went to an apple authorized provider to install a new bigger hard drive. They also moved the data and applications from my old drive to the new one. They did not use time capsule because their way was faster. After the installation I did have to reenter the product code key for Office 2011 for the Mac. However, now I find that I cannot do email spotlight searches in Outlook. When I put in the search - it comes up with no results. This is true no matter what the search. Any ideas of how to point spotlight to look in the email folders so I can do searches again. This is a feature I use daily - so I am concerned that I have lost this feature. Also, I am noticing that alot of the settings did not carry over to the new hard drive. Any help is greatly appreciated!

I would recommend starting over and migrate using your Time Capsule backup however DO NOT do it wirelessly, connect using an Ethernet Connection. If you upgraded to Lion from Snow Leopard then follow the instructions in this video, the kid is annoying but he knows what he's doing. Clean Install Of Snow Leopard video. Once you have installed and updated Snow Leopard then update using the 10.6.8 Update Combo, then log into the Mac App Store and re-install Lion and all it's updates. My guess this is an afternoons work.

I have the new IPad and the sound does not work with games but works everywhere else, any clue?

IIiiiiii

If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085

I am trying to open a service request and the site does not work.

I am trying to open a service request and the site does not work with ANY browser. I get the page https://getsupport.apple.com/GetParts.action which says "Send in for service. We just need a little more information." The continue button does not work. I've seen this problem before trying to file support requests. It's as if Apple simply does not want you to create requests.

I just went through several screens and had no problems. Try clearing your browser's cache and/or history.

Paste and match style does not work in some cases

Dear Sir
My "Paste and Match Style" does not work with some sites.

What happens if you put table Table_1 into the Analytic View?
Also go ahead and and update HANA, Rev.60 is very old by now.

In Photoshop CS6 Hue Saturation does not work with forground/background Jitter set at 100 percent no change in color is observed. Help

In Photoshop CS6 Hue Saturation does not work with forground/background Jitter set at 100 percent no change in color is observed. I have Added a screen Shot of the Brush settings and a demonstration of what the brush produces.
I also notice That when I make a pattern of a single color, when I fill a selection with the pattern I get a rainbow of different colors.
I am running a 64 bit version of Photoshop from the CS6 Masters Collection
I am on a PC with a Intel i7 1366 4 physical cores and 8 threads, 24 Gig of DDR memory, A Crucial 512 Gig SSD and a NVIDIA GTX 570 with 2 Gig of memory.
The document size is 2100 by 1500 Pixels at 300 PPI only two layers

In Photoshop CS6 Hue Saturation does not work with forground/background Jitter set at 100 percent no change in color is observed. I have Added a screen Shot of the Brush settings and a demonstration of what the brush produces.
I also notice That when I make a pattern of a single color, when I fill a selection with the pattern I get a rainbow of different colors.
I am running a 64 bit version of Photoshop from the CS6 Masters Collection
I am on a PC with a Intel i7 1366 4 physical cores and 8 threads, 24 Gig of DDR memory, A Crucial 512 Gig SSD and a NVIDIA GTX 570 with 2 Gig of memory.
The document size is 2100 by 1500 Pixels at 300 PPI only two layers

My printer does not work with firefox but does work with explorer

While using ebay I tried to print out a mailing label, and fox fire does not work with it anymore. My printer does work with internet explorer ?

What printer? Does the page appear correctly in Print Preview? What happens when you try to print?

Target data source does not support the AGO operation

Hi,
In BI Admin Tool, I join Essbase cube and relational source. Then I apply Ago function to Essbase measures. In BI Answer, I try to run query that includes Essbase Ago measures and relational columns(non measures), error message shows the following detail:
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 22001] Target data source does not support the AGO operation. (HY000)
When I remove the relational columns or run Essbase current-date messures, the result is fine.
So, what's exact meaning of this error message? and does the relational columns (non-measure) support Essbase measures' Ago function?

to clarify:
fail case:
criteria
YEAR | YTD,gen03 | MONTH_NAME | SALES(YEAR_AGO)
cube dimension: year, ytd,gen03
relational source: month_name
cube measure using AGO(): sales(year_ago)
result: error messageSuccess case:
criteria
YEAR | YTD,gen03 | SALES(YEAR_AGO)
cube dimension: year, ytd,gen03
cube measure using AGO(): sales(year_ago)
result: success~! how can i solve it? thx

Date parameter does not work in SharePoint 2010 report using SQL 2008 Server Reporting Service

Here is the settings:
SharePoint 2010 with SQL server 2008 reporting services configured
When create a report for a SP list using SQL server report builder (3.0) the date parameter does not work.
The data parameter is set as "date and time" type and field name equals the col name in the SP list
When run the report, the whatever dates I select, the result is always the same, so the parameters do not take any effect.
Is any step missing?
Thanks for any advice !

Hi ,
How did you configure you "date and time" type parameter and field name equals the col name in the SP list?
Have you tested if other type parameter worked?
Have you tried typing the date format as 20140722 in your date parameter filed before run the report?
http://whitepages.unlimitedviz.com/2012/02/using-sharepoint-filters-with-reporting-services-parameters-for-personalized-reports/
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Daniel Yang
TechNet Community Support

Using Two-Phase Commits and Data Sources does not work with OCI

Similar Messages

Maybe you are looking for