Using two routers together and having problems

i am using a wrt54g router and the modem is plugged into that wan port and i want to use a befsx41 router to add more ports for internet and to give some extra places to use internet on it. how would i get this to work because i have internet from the wrt54g router wired and wireless but the stuff plugged into the befsx41 doesnt work...

willlayb wrote:
i am using a wrt54g router and the modem is plugged into that wan port and i want to use a befsx41 router to add more ports for internet and to give some extra places to use internet on it. how would i get this to work because i have internet from the wrt54g router wired and wireless but the stuff plugged into the befsx41 doesnt work...
Hi
I Think u are missing something in between.
Follow the Magic Link , and observe the steps.
hope for gud .
pe@c3
"What u Give , is wht u better start expecting to take back".. - http://Forsakenbliss.wordpress.com

Similar Messages

  • Using the "Party" Menu and Having Problems?

    There has been much discussion regarding problems with the "Party" Menu from the En Library. All sorts of problems, but the common aspect was this particular Menu.
    Thanks to Jeff Bellune, we have looked closely at this Menu for any errors on Adobe's part. None have been found. The only possibility that Jeff, or I could see, was that the font used, Brush Script Std. might not be installed on all machines. This would trigger an error message in Photoshop, and ask permission to substitute that font for one that is installed. No problem, other than a substituted font. However, Jeff pointed out that Encore might have issues with a missing font, and not treat this in the same way that PS would. This is a bit of speculation, but in Jeff's case his "speculation" is much better than my "knowledge."
    As for the font, it ships in the "Goodies" section on the installation disc, and should be included in the Functional Content with the downloaded version of CS3/CS4. It should also be part of the full install, though I suppose that there would be circumstances where it might not install automatically. If this is your case, just go to your installation disc, and locate the font. Use a manual install through Windows, or your OS. Now, this particular Menu should function perfectly. There could also be others, where the font might not be present on one's system. Again, the solution would be the same - install that font.
    The only oddity that I found was that the Sub-picture Highlight of the first Button was turned ON. Not sure if this was just a mistake of Adobe's, or was maybe something that I did accidently. Either way, if you get Button 1 with a Highlight (star Shape to the left of the text), just go into that Button's Layer Set and make sure that it's turned OFF. That is the correct state for all Sub-picutre Highlights. The DVD player, or computer, will turn the appropriate one ON, when that Button is navigated to.
    I think that I can safely say that there are no "gremlins" in that Menu. Besides checking out perfectly in PS, it functioned perfectly in En. Of course, I had that font installed, as did Jeff.
    If any user finds any problem with that Menu, please post the complete and exact details on what you encounter and complete details on your version of En, plus the installation method and language of both the installation and the program. Those could be very important. More details are better.
    Hope we don't see mention of the "Party" Menu, except that people used it with NO issues.
    Good luck,
    Hunt

    willlayb wrote:
    i am using a wrt54g router and the modem is plugged into that wan port and i want to use a befsx41 router to add more ports for internet and to give some extra places to use internet on it. how would i get this to work because i have internet from the wrt54g router wired and wireless but the stuff plugged into the befsx41 doesnt work...
    Hi
    I Think u are missing something in between.
    Follow the Magic Link , and observe the steps.
    hope for gud .
    pe@c3
    "What u Give , is wht u better start expecting to take back".. - http://Forsakenbliss.wordpress.com

  • If you are using a screen reader and having problems using Mail, it might help to disable automatic page updates. Please note, this will also disable chat and text messaging within Yahoo! Mail.This problem has resurfaced from previous versions of Firefox.

    I get a terrible display in ATT Yahoo!

    I have this same problem and it occurs with other websites (like ESPN.com) too. Only I don't get the option of disabling automatic page updates on other websites. I disabled and reinstalled Mozilla and it went away for a short while. About two weeks later the same problem popped back up.

  • Using Videora Ipod Converter and having problems

    I am using videora converter to convert movies which come in more than one part. The first part will concert but the next ones will not drag to my ipod. A box comes up stating that my ipod can't play it. It is the same format with just a different name (matrix-001.& matrix-002 ect.)How can I get the other parts to be compatible.

    I just did this yesterday.
    In your settings you have a directory for the output video. Your video will be in this directory. Mine was set to ProgramFiles/VideoraIpodConverter/Videos, but you can change it in settings. The Video for Ipod will be in this directory.

  • I am using Apple iphone 3gs and having a problem of no services after inserting sim card

    I am using Apple iphone 3gs and having a problem of no services after inserting sim card, how to resolve it?

    Follow this article below it will tell you step by step what to do.
    http://support.apple.com/kb/ts4429
    If you're still experiencing No Service, contact your carrier to check for any network or account issues that could cause these problem.

  • I have 10.5.8 and i'd like to update to Lion but I haven't the app store avaiable to my sistem and I can find the atualization. At the software update doesn't have any atualization... I updated my iphone4 to IOS5 and having problems to use ICloud

    i have 10.5.8 and i'd like to update to Lion but I haven't the app store avaiable to my sistem and I can find the atualization. At the software update doesn't have any atualization... I updated my iphone4 to IOS5 and having problems to use ICloud

    As Retired Engineer indicated, you will need to install Snow Leopard first.  After you install Snow Leopard, you need to go into Software Update and perform the updates.  10.6.6 will install the App Store.  You should continue to update to 10.6.8 before purchasing and installing Lion from the App Store.
    Be sure your machine meets the minimum requirements.  Basically, any Mac with a Core 2 Duo processor or later and at least 2GB of RAM (but 4 is highly recommended).  If you have a first generation MacBook Pro with a Core Duo, you will not be able to upgrade to Lion.

  • I am using a multiline textbox and the problem is its not showing vertical scrollbar in safari browser.

    I am using a multiline textbox and the problem is its not showing vertical scrollbar in safari browser.

    If you are having problems scrolling within a frame then you should be able to use two fingers within the frame to scroll

  • I have bought Adobe Photoshop Elements 10 last August 2013 and having problems with installing it on Windows 8.1?

    I have bought Adobe Photoshop Elements 10 last August 2013 and having problems with installing it on Windows 8.1.  Why am I having this problem?

    You can check you Adobe account online to see if the serial number is registered under your account.  If not then your only option will likely be to contact Adobe Support directly thru chat to see if they can provide you with a/the serial number. For them to do so will require you being able to prove ownership.
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

  • I'm running iTunes 10.5 on my Macbook Pro and software 4.1 on my 2g iPod touch and having problems getting photo's to sync. Same error iPod can't be synced req'd file can't be found. Tried deleting the photo cache, restoring the iPod etc but to no avail.

    I'm running iTunes 10.5 on my Macbook Pro and software 4.1 on my 2g iPod touch and having problems getting photo's to sync. Same error, "iPod can't be synced req'd file can't be found". Tried deleting the photo cache, restoring the iPod etc but to no avail.

    Try here:
    iTunes: Unable to sync photos
    Usually deleting the iPod Photo Cache Folder works. Note that if you sync via the folder method, make sure you dlete all the ifolders since :
    The iPod Photo Cache stores the photos that are optimized for display on your iPod, iPad, or iPhone. The location of this folder depends on the syncing options you select. In iTunes, if you change the selection in the “Sync Photos From” pop-up menu, a new iPod Photo Cache folder will be created (and the previous folder will remain).

  • I downloaded the latest iOS7 to my iPad and then the screen went blank and would not respond.   I have tried pressing the two buttons together and briefly get the Apple logo but still can not start up, the logo disappears.   I have tried connecting the iP

    I downloaded the latest iOS7 to my iPad and then the screen went blank and would not respond.   I have tried pressing the two buttons together and briefly get the Apple logo but still can not restart, the logo disappears.   I have tried connecting to my iMac to restore the iPad but the device does not show up (I have an old iMac).   What else can I do?

    You need to be running Snow Leopard 10.6.8 at the very least in order to sync your iPad with iTunes so you could update your Mac, if it can be updated, and if you care to do so.
    If that's not an option, you will have to find someone that can restore the device for you with their computer running iTunes or make an appointment at an Apple Store and ask them to restore the device for you.
    I hope that you have an iCloud backup, because you will lose everything on the device when it is restored.
    Snow Leopard can still be purchased in the U.S. Apple Online Store.
    http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    Also, I would not give up on the reset technique....holding down on the sleep and home buttons at the same time until the Apple logo appears. It takes about 10-15 seconds and sometimes just a little longer to get the logo to appear.

  • Just purchased Wndows Vista and having problems with the port for Palm 125

    I just purchased a Windows Vista computer and having problems with getting my Palm 125 to sync with the desktop.  I get an error message saying:  "Com1 not available"  What do I do?
    Thanks,
    Frustrated
    Post relates to: Palm m125
    This question was solved.
    View Solution.

    Sorry, that didn't work.  I get no drop down menu from the Hot Sync Manager for the Serial Port.  What comes up often is:  "The selected port, COM1, is not available at this time.  Hot Sync Manager will open the port when it becomes available." 
    Could it be the Norton Antivirus Firewall that is preventing the Hot Sync Manager to open the Serial Port?  Just a thought.  Thanks for your help.
    Post relates to: Palm m125

  • I have iPod touch 5 and having problems

    I have iPod touch 5 and having problems with charging(data cable is ok), when I have contacted support in my country, they would like to have recieve and warranty letter that I do not have. What should I do?

    Unfortunately I am not in US(.
    Ukrainian Apple Authorized Service Provider tells me to bring it, but iPod was purchased in US)

  • New GPU Quadro k5200 installed and having problem with my AE, PPro CS6  not using the GPUs cuda.

    Hi guys, I recently bought a workstation from BOXX tech with a new GPU Quadro k5200 installed in it.
    I am having problem with my AE, PPro CS6 using the GPUs cuda.
    I went to Nvidia Settings and use the specific App to select it to use GPU n- Quadro k5200. But still not working.
    Please help

    If you edited the Cudatextfile in the Adobe Premiere CS6 directory correctly then the acceleration should be enabled. The only way it it's not is if you have the wrong driver for that version of Adobe or did not edit the text file with the exact name of the card. You can use the GPUsniffer in that same Premiere directoy with the command prompt to see the name the GPU should be listed as. The Ray Tracer file in AE has to be edited with the same listing.
    Eric
    ADK

  • Was using Flash 8 on a PC now using Flash CS3 on MAC X and having problems

    Hello,
    I'm currently creating a photo gallery displaying thumbnails
    of the original main image.
    I was using Flash 8 on a PC and now am using that same file
    on a MAC OS X using Flash CS3. And now the thumbnails are not
    visible. The main image appears but the thumbnails do not.
    The SWF created with Flash 8 viewed properly but when I
    opened the fla in Flash CS3 the thumbnails stopped appearing and
    I'm not sure what to do?
    Any help or suggestions would be greatly appreciated!
    Thanks

    Whoops, maybe I posted this in the wrong forum

  • Using two fingerprint readers and a docking station

    I'm having a problem with the fingerprint reader when used with an Advanced mini dock station.
    I recently aquired an Advanced mini dock and a Lenovo fingerprint keyboard to be used with my T61p and Windows 7 Ultimate.
    The problem is that each time the T61p is docked I need to open Windows Device Manager and disable the internal fingerprint reader - and when undocked - the internal fingerprint reader needs to be enabled again.
    This is a bit tedious - to say the least.
    I've heard from someone that Windows should 'remember' when you enable/disable like this when the machine is docked and undocked, but this doesn't happen here.
    Any ideas on how to make Windows automatically switch between the internal fingerprint reader when undocked - and the external fingerprint reader on the Lenovo keyboard - when docked? I know there is no longer machine hardware profiles - like in Win XP. But shouldn't there be some other feature to take care of stuff like this?
    Any hints are welcome.
    TIA.
    Nils G. Svedmyr
    Thinkpad W510 4318-CTO 15,6" 1920x1080 nVidia Quadro FX 880M Intel i7 CPU X920XM, 256GB SDD + 500 GB HD 16GB
    RAM Gobi Broadband Device Windows 7 Ultimate 64-bits In our company you can name your own salary. I named mine "Fred"

    Tinkerguy,
    Thank you for the tip.
    However, although very informative - it doesn't help in my case. On the Lenovo fingerprint keyboard I'm using the fingerprint reader is an UPEK as well - and for both FPR's the same driver version is loaded.
    I forgot to mention that I've already checked that the external FPR has been set to have precedence in BIOS.
    I'm now in contact with tech support at UPEK - Let's see if that gives anything.
    Question: Is there _anyone_ out there that is successfully using Lenovo's Fingerprint Reader keyboard with a Thinkpad and a docking station under Windows 7?
    By successful, I mean without having the necessity to switch the internal fingerprint reader off and on when docking/undocking?
    TIA.
    Nils G. Svedmyr
    Thinkpad W510 4318-CTO 15,6" 1920x1080 nVidia Quadro FX 880M Intel i7 CPU X920XM, 256GB SDD + 500 GB HD 16GB
    RAM Gobi Broadband Device Windows 7 Ultimate 64-bits In our company you can name your own salary. I named mine "Fred"

Maybe you are looking for