USING TWO TRACKS OR MORE SIMULTANEOUSLY

What is the best way to record two tracks or more at the same time. For instance drums, or a amp/direct signal at the same time.?

(no need to yell)
http://www.bulletsandbones.com/GB/Tutorials.html#bsqrecordmultipletracks

Similar Messages

How to VIEW two tracks's materials SIMULTANEOUSLY and SYNCHRONIZED in MONITORS?

How to VIEW two tracks's materials SIMULTANEOUSLY and SYNCHRONIZED in MONITORS?
"Program-monitor" shows the final edited material, and "Source-monitor" shows only one track at a time, and NOT SYNCHRONIZED with the sequence. "MultiCam-monitor" shows the tracks as I need, BUT editing is very stiff: I want to do edits+cross-fades by hand IN THE TIMELEINE rather than by clicking the monitors. (Some of the "MultiCam-monitor's" other problems: 1) the timeline's time-inspector doesn't move while clicking the monitors, 2) vice-versa: monitor-image doesn't roll when the space-key is pressed for playback the timeline, 3) monitor doesn't show the cross-fades.....) I understand the "Reference-monitor" doesn't help either at this.
I would SO much like to SEE all tracks' materials simultaneously in whatever monitor, to edit efficently in the timeline.
Software: Premiere CS3 version 3.2.0
Operating System: Mac OS X (v10.4)

You can only do this in the multicamera monitor. That's what it's there for. Proper procedure is to cut there, then go to the timeline and add transitions.
If you're multicamera monitor playback isn't working correctly (I admit having a hard time understanding your points here), then try solving those.

Can I use two Windows User Accounts simultaneously?

Hi
I use my pc for two businesses. Presently I have two user accounts that I have to switch bewteen by logging off each time - disconnecting my broadband.
Is it possible to run the two accounts simultaneously?
Regards,
Grant Basson
[email protected]

Hi Grant,
You can use the Windows shortcut to have two or more user account active at the same time. The short cut for this is to press and hold the 'Windows' key on your keyboard and also press the 'L' key. This will then cause the Windows log-on screen to be displayed but without logging off the first user account.
regards,

Using Two Drives On Macpro Simultaneously

I have a couple of Pioneer 115D drives in my Macpro and have recently tried to get them to burn together as a time saver. All I managed to do was get the bottom drive to be shown as the top one and the other one the bottom ... ! Anyone have any ideas as to whether such a thought can be made to work ?

Ron wrote:
Mike, at the moment I'm using iDVD and Utility App but I'll have a look into Toast with the same iDVD product. If Toast produces from one iDVD prog then I'm presuming the same should occur with twin entries in the finder ... ?
Ron,
I am afraid I don't understand your question to me here. I don't use iDVD at all and I don't know what "Utility app" is. I use my two burners for putting large volumes of data onto DVD and BD discs simultaneously after a big job. Duplicate copies of Toast app works well for this, I don't know whether duplicate copies of iDVD would do the same, if that is what you are asking. I'll help more if I can.
I did have a problem when I added the blu ray with upper and lower. I could only get the correct matching by putting the blu ray in the lower whereas I wanted it in the upper originally. But the blu ray is SATA so may not be relevant to your situation.
Message was edited by: Mike Boreham

How can I use two analog output channels simultaneously?

I am using PCI6110 DAQ card. I want to run two separate VIs on one computer. Each VI output a waveform to one analog output channel. How can I do this simultaneously without interfering each other?
Thanks

Hi Stephen,
This can NOT be done with two seperate VI's.
The issue is in the hardware/driver.
Your hardware has a clock that controls how fast updates to the AO occur. That clock can only have one value at a time. I will let your contemplate the complications that come up with two different clock settings being active at the same time (see below).
So how do you work around this complication?
You will have to develop a single VI that OWNs both output channels. That VI will have to accept start,stop,configure, etc commands from the two clients (what you will have to convert your existing VI's into). If you decide to place a restriction on the services you provide to the clients along the line of "only one sample rate at a time" you will be making your li
fe much easier.
If I was contracted by a customer to do what you have asked, I would try to combine the two existing VI's into one or simply buy a second 6110 and avoid all of the hassles. Both of these approaches would end up saving the customer money in the long run while freeing them of any restrictions that where established in order to develop the "server".
I hope this helps,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Using two versions of jre simultaneously

We have two web java-based applications, and each one requires one specific version of java (1.4.1_03 and 1.3.1_07).
They only work with their required java version. Furthermore, if we install the newer one, the one which needs the oldest does not work.
Is there any way to install both versions, and use them each one with its associated application (i.e. changing path..)?
The management operations for both applications will be carried out from a single point (a single PC, Windows NT/2000), and we need to have access to both applications from that single point.
Any help is welcome.....
Thank you

I maintain a plethora of Java versions on my PC, I use a script to switch among them; it sets the PATH accordingly.
1.1
1.1.8
1.1.8_v3
1.2.2
1.3.1
1.3.1_08
1.3.1_09
1.4.1
1.4.1_01_blackdown
1.4.1_02
1.4.1_05
1.4.2
ijbalazs@bijpc:~> . j 1.1
java version "1.1.8"
ijbalazs@bijpc:~> . j 1.2.2
java version "1.2.2"
Classic VM (build JDK-1.2.2_014, green threads, nojit)
ijbalazs@bijpc:~> . j 1.3.1
java version "1.3.1_09"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.3.1_09-b03)
Java HotSpot(TM) Client VM (build 1.3.1_09-b03, mixed mode)
ijbalazs@bijpc:~> . j 1.4.1
java version "1.4.1_05"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.1_05-b01)
Java HotSpot(TM) Client VM (build 1.4.1_05-b01, mixed mode)
ijbalazs@bijpc:~> . j 1.4.2
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2-b28)
Java HotSpot(TM) Client VM (build 1.4.2-b28, mixed mode)
ijbalazs@bijpc:~>

How to use two or more mics simultaneously on a firewire interface?

hey i have the fireface 400 and am using it with logic. how do i use both mic pres on the front of the fireface simultaneously. for example i want to record an acoustic using two mics. probably a simple question please help me out.

How do you "use" them? Please be more specific...
Make sure you choose the correct inputs on the relevant tracks..
If that doesn't help you I've heard stamp collecting can be fun.

Can I use two or more seperate Apple ID accounts on Apple TV? Everyone in my family has a different account.

Can I use two or more Apple ID accounts on the new Apple TV? Everyone in my family has a seperate account.

Of my 7 Apple TV's only one is connected by ethernet, they all work as expected, more often than not at the same time (I probaly haven't had 7 running at the same time, it depends on who's using what))

Can I use two airports to use internet and listen to itunes in stereo? simultaneously?

Can I use two airports to use internet and listen to itunes in stereo? I just bought a second airport so I could listen to itunes & Pandora on my stereo. My problem is that I haven't been able to connect to both airports at once. I want to listen to the stereo (one airport) while using internet which is connected to a separate airport. Unfortunately, the stereo and ethernet cables are not close by which is why I bought the second airport.

You can run both simultaneously. You just need to reconfigure the base station that will be used for streaming as a wireless client.
I suggest that you start by performing a "factory default" reset on the 802.11n AirPort Express Base Station (AXn) to get it back to its "out-of-the-box" configuration. By default, the AXn will broadcast an unsecured wireless network with a Network Name of something like: Apple Network NNNNNN
After the reset has completed, plug the AXn into power, and then, verify from the iMac that this network shows up in the list of networks under the AirPort icon in the OS X menu bar.
Be sure to first switch the wireless network to the AirPort that will be used for streaming. Note: You will temporarily lose the Internet connection from your "main" AirPort. Then, run the AirPort Utility. The Utility should now find the streaming AXn. If not, use the Utility's "Configure Other" option under the File menu option in the Utility's menu bar. Enter 10.0.1.1 for the Address and "public" for the Password.
AirPort Utility > Select the AXn > Manual Setup > AirPort > Wireless
Wireless Mode: Join a wireless network
Network Name: <existing "main" AirPort's wireless network>
Wireless Security: <select the encryption type of the existing wireless network>
Wireless Password: <enter the existing wireless network password>
Verify Password: <re-enter the existing wireless network password>
AirPort Utility > Select the AXn > Manual Setup >Music
Enable AirPlay (checked)
iTunes Speaker Name: <enter desired speaker name>
iTunes Speaker Password: (optional)
Verify Password: (optional)
Click Update to write the new settings to the AX

How to create a unique key using two or more attributes?

how to create a unique key using two or more attributes ?

The following example illustrate how to create a unique key using two or more attributes/fields
Scenario: Implementing Unique Key on ManagerID & Location ID in DepartmentEO(Department Table)
Step#1: Open the Desired Entity Object “DepartmentEO”. Go to Overview tab & Click “General” Finger tab.
Step#2: Expand “Alternate Keys” section & click “+”.
Step#3: In the Pop-up wizard, Enter a name for alternate Key “Unique_Manager_X_Location”.
Step#4: Select the desired attributes/fields from available list & Shuffle to right side.
Step#5: Now go to “Business Rules” finger tab.
Step#6: Select “Entity Validators” in the list & click “+” to add a new entity level validation rule.
Step#7: In the Pop-up, Select “Rule Type” as Unique Key
Step#8: In the “Rule Definition” tab select the key “Unique_Manager_X_Location”created.
Step#9: Now go to “Failure Handling” tab, and click the Magnifier Icon .
Step#10: If the key is not already created then in the “Select Text Resource” Popup, Using the functional design document, Enter display value, Key and Description. And click “Save & Select” Button.
Step#11: Now Click “OK”.

How can I use two webcams simultaneously?

Hi,
I want to hook up two external webcams to a Macbook or an iMac and be able to display a live view of both camera images at the same time.
It doesn't matter if the live view is a single app showing both cameras or two separate windows, as long as both images can be viewed simultaneously on the desktop.
Can anyone recommend the hardware (webcams) and software I would need to accomplish this?
Thanks.

Wirecast
http://www.macupdate.com/app/mac/14875/wirecast
Wirecast Frequently Asked Questions
http://www.telestream.net/telestream-support/wire-cast/faq.htm
... or you can use two different services/applications that allow for webcam use, and select CAMERA #1 in SOFTWARE #1, select CAMERA #2 in SOFTWARE #2.
http://www.macupdate.com/find/mac/webcam
Best Apple Macintosh Web Cameras
http://mac-compatible-webcams.blogspot.com/
Apple Compatible Mac Web Cameras For Video Chat
http://www.mac-compatible-web-cam.com/

Can i use two bluetooth devices simultaneously with iphone 4s? Specifically,a bluetooth headset, as well as a new low energy bluetooth heart monitor?

Can I use two bluetooth devices simultaneously with iphone 4s? Specifically a bluetooth headset as well as a new low-energy smart bluetooth heart monitor?

I don't believe so.

I have two iphones using the same computer and I can only find a backup for my iphone and not my girlfriends. She uses itunes a lot more often then I do but cant find it

I have two iphones using the same computer and I can only find a backup for my iphone and not my girlfriends. She uses itunes a lot more often then I do but cant find it. Really need some help. Shouldnt her apps and details be saved online in the itunes store? Even her apps wont appear

If you create an Apple ID for your daughter, signing out of the existing Apple ID with the iTunes & App Store on her iPhone will not change anything on your iPhone.
All apps include DRM protection which is tied to the Apple ID that was used to download the apps.
If she starts using her Apple ID to download apps, when there is an app update for an app on her iPhone that was downloaded with the current shared Apple ID, she will need to use that Apple ID and password to download the app updates.

Using two audio interfaces simultaneously?

Hi
Not sure if this is an unsual query - will Logic recognise two usb audio interfaces of the same make running simultaneously?
Would they come up as interface (1) and (2)? - I know Pro tools does this if you rack up multiple interfaces - however these would not be 'linked' as such..just put into the two usb ports of a mac book.
Basically I have a single stereo out alesis io2 interface, but need to run two tracks independantly of each other into a desk - so wondered if getting another io2 would be a cheap work around...
Thanks for any help.
Matt

Yes, you can set up an "Aggregate Device" in Audio Midi setup, which Logic will then recognize. This support page tells you how:
http://support.apple.com/kb/HT1215

How do images embeded in InDesign link when using Creative Cloud on more than two desktops?

How do images embeded in InDesign link when using Creative Cloud on more than two desktops?

If I am understanding your question correctly, you shouldn't have to worry about embedded images in InDesign. Once embedded, the image is stored within the file.
If you are wondering about linked images... InDesign will follow the path on your computer and, if it does not find the image, you will recieve a notification. Edit: To prevent this, I would suggest packaging your file using File > Package... This will create a folder with all of your fonts and linked graphics so that you need not worry about broken links. I just remembered that you cannot upload folders directly to Creative Cloud so a packaged folder wouldn't be very helpful unless you wanted to upload each file manually.
The best solution I see right now is to either embed the graphics in the document, or upload the images with your document to relink.
I hope this helped,
Michael

USING TWO TRACKS OR MORE SIMULTANEOUSLY

Similar Messages

Maybe you are looking for