Using U tube videos in Mac Premiere Elements 11

Can I download u tube videos to mac premiere elements 11 to use in a project that I am working on?  If so, how do I do it?
Thanks.
barb

Barb
Mac or Windows or Premiere Elements 11 is not the question....
There are several software targeting video downloads from YouTube, I am told. BUT, last that I heard, none are considered legal for want of a better term. Last time I looked at this issue, the consensus was that the YouTube Agreement did not allow for this activity.
The following online article goes into fuller details on the matter.
http://www.pcadvisor.co.uk/how-to/internet/3420353/is-it-legal-download-youtube-videos/
ATR

Similar Messages

  • I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is  not installed.  When it opens there is a red screen in the monitor panel with Korean writing which als

    I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is  not installed.  When it opens there is a red screen in the monitor panel with Korean writing which also appears in the place of each clip in the video.  I tried uninstalling and reinstalling premiere elements 10, but that did not have any effect on the video.  Do you have any suggestions?  I researched codec, but do not understand them at all.

    gloucester
    In case you did not find it, the following is a copy/paste of the Announcement on Premiere Elements 19/NVIDIA GeForce
    that appears at the top of this forum.
    Premiere Elements 10 NVIDIA Video Card Driver Roll Back
    If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing
    Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling
    back the video card driver version instead of assuring that it is up to date.
    Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow
    glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies
    to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of
    the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere
    Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
    Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
    http://forums.adobe.com/thread/1317675
    Older NVIDIA GeForce drivers can be found
    http://www.nvidia.com/Download/Find.aspx?lang=en-us
    A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back can be found
    http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
    ATR

  • No video playback in Premiere Elements 10

    Hi,
    I've got something I can't solve here. I cannot playback any video in Elements 10 on win 8.1. It was originally a Canon .MOV recorded on a G12, and i could hear audio but see nothing. I then converted the file to a AVI, MP4, etc...and got nothing. So I went to my archive and loaded up some other files that had been working with the same program on Win7, nada. Then I tried various random videos, .flv etc.. Then tried to run videos previously created with this software.
    I also tried Win7 compatibility mode, and run as Admin.
    All of the above videos played fine in various video software.
    Any ideas?
    Thanks,

    Candy
    What is the video card/graphics card that is being used by the computer with your Premiere Elements 10? You may a Premiere Elements 10 user hit by the NVIDIA video card issue which requires a roll back of the driver version rather than assuring the you have the latest version of the driver installed. Please check out the following thread on that possibility.
    http://forums.adobe.com/thread/1317675
    By the way, flv files never have imported into Premiere Elements (any version). However, you can export a Premiere Elements Timeline to a .flv file.
    Do you have the latest version of QuickTime installed on your Windows 7 (assumed 64 bit) computer?
    We will be watching for your follow up with more details of your situation.
    Thanks.
    ATR

  • How can I raise the volume on a video clip in Premiere Elements 12?

    I want to raise the volume on a video clip in Premiere Elements 12. Can anyone help?

    jcomput
    Always good to give the computer operating system involved in case any computer specific details needed to be included. But here is your
    generalized yet specific answer for Premiere Elements 12 and increasing the volume of a video clip.
    If you are in the Expert workspace...
    a. click and drag upward the orange band that runs horizontally through the middle of the audio clip.
    or
    b. go to Adjust Tab/Adjustments Palette/ Volume Panel expanded on move the volume slide toward +6 dB.
    0 db does not represent no sound. It represents the volume of the sound when it was recorded. 0 to +6 dB increases the sound above the recording level; 0 to infinity symbol decreases the sound below the recording level, finally to muted sound.
    Please let us know if you are OK with the details above. My blog post on PE12: Audio Features may be useful to you.
    ATR Premiere Elements Troubleshooting: PE12: Audio Features
    Thank you.
    ATR

  • Mac Premiere Elements 11 crashes on launch (network account only)

    I am trying to use Mac Premiere Elements 11 (OS X 10.8) and it crashes every time on launch, but only for a network account. When I launch using a local administrator user, it works fine. How can I make it work for the network account?
    I have already tried ensuring Read/Write permissions on my entire Home folder, and have uninstalled/reinstalled multiple times.
    If it matters, the Home folders are on an external disk. The network account is set to be an administrator on the computer (this particular Mac is the Open Directory server, so it's a network user directly on the directory server).
    No other application (including Photoshop Elements 11) has any issues at all.
    If it is helpful, I can post the (huge) stack trace of the crash. Thank you... --Erik Bailey

    >How can I make it work for the network account?
    You can't... read below
    No current version of Premiere works properly, if at all, over a network
    -you may NOT "map" your My Documents folder to a network drive
    -you MUST give all users administrator accounts to use Premiere
    -you MAY also need to... http://forums.adobe.com/thread/969395
    -http://forums.adobe.com/thread/771151
    -http://forums.adobe.com/thread/851602
    -a work around, of sorts http://forums.adobe.com/thread/957523
    -and not on a "domain" http://forums.adobe.com/thread/858977
    -also PreEl see #5 http://forums.adobe.com/thread/1017199
    -more PreEl problem http://forums.adobe.com/thread/975117

  • Importing Videos To Adobe Premiere Elements 11 Only Shows Black Screen

    Why is it Importing WMV Videos To Adobe Premiere Elements 11 Only Shows Black Screen.
    Thank You In Advance

    mrtomr4455
    Forget about all the rest until you check out the Announcement at the top of this forum regarding the current 1/2 wmv display related to a recent Windows Update kb file. I missed the wmv part of your initial question by focusing too much on the thread title.
    Here is a copy for your convenience
    Announcement: Windows Update Causes Half of Display to Be Blacked Out
    Hide Details
    MicroSoft has issued an Update for Windows, that is causing problems with Displays. The following is from Talbot McInnis, who tracked down this problem, and offers a fix:
    "MS bulliten MS13-057.  Specifically, on XP kb2834904 and on windows 7 kb2803821 is causing a problem
    For us, it occurs when decoding WMV9 files.  Not all uses of WMV decoding are affected, but I confirmed that when connecting the WMV decode DLL to a sample grabber for RGB32 video, the frames arrive black on top, so that points directly to decoding internals of the WMV Decode dll.
    You can uninstall these windows updates to resolve your problem."
    There are several threads on the problem that this Update is causing on the PrE and PrPro Forums, so one can get more details. So far, there is not another fix from either MS, or Adobe.
    Also, see this Adobe KB Article: http://helpx.adobe.com/premiere-pro/kb/wmv-files-corrupted-import-or.h tml
      by Bill Hunt (Aug 2, 2013)
    I think that is your answer. Please let us know if that worked for you.
    Thanks.
    ATR

  • Using You Tube video clips question:

    After importing several clips from You Tube (of varying quality) to incorporate into an editing project, the clips look okay and play  full screen, in the "source" window, but when I put them in the timeline and play them in the "program" window, they are thumbnail size.  Why does this happen? I tried converting...but still no luck.

    JSS1138 wrote:
    Re: Using You Tube video clips question:
    The short answer here is, don't.  (Assuming that if it was yours in the first place, you'd have the original and not have to use the upload.)
    And Bill, you should know better than to help someone violate copyright law.
    yeah, i beg to differ on this. i have 100s of videos on youtube i did back when it first started before i saved my finished projects... (from 2005-2008 i would just record, edit, post, delete, because it was just random junk of me hanging out with friends, or just v-logging about stuff i needed to blow steam about) so one of these days i'll have to go through and download them and burn them for archives. Never say never

  • ¿Como actualizar mac Premiere Elements 10 a 11?

    ¿Como actualizar mac Premiere Elements 10 a 11?
    Comprada en AppStore en Jul-2012

    Usted puede comprar la actualización de Photoshop Elements en http://www.adobe.com/products/photoshop-elements.html. Si usted tiene alguna pregunta adicional puede usted por favor, responda en Inglés ya que este es un foro de idioma Inglés. Si usted desea continuar en español, por favor mensaje a nuestros foros Internacionales en http://forums.adobe.com/community/international_forums.
    You can purchase the upgrade for Photoshop Elements at http://www.adobe.com/products/photoshop-elements.html.  If you have any additional questions can you please respond in English as this is an English language forum.  If you would like to proceed in Spanish then please post to our International forums at http://forums.adobe.com/community/international_forums.

  • How pinnacle can be used for streaming video for mac app?

    How pinnacle can be used for streaming video for mac app?

    Hi naturalfemale,
    As mentioned in the referring article, closed captioning content has to be specifically added/enabled to a video for closed captioning to function:
    Additional Information
    Not all videos include caption or subtitle tracks. Check the documentation for the video you are using to see if it includes these features.
    OS X: Using captioning features in Mavericks
    http://support.apple.com/kb/HT5910
    At the moment, I do not believe there is an option for universal captioning.
    Regards,
    - Brenden

  • Importing video created in Premiere Elements into Muse

    Ideally we should be able to work in one Adobe product and transfer the work product to another Adobe product. I love Muse, but I am unable to export a video created in Premiere Elements CS6 into Muse CS6. The problem is that there is no export option in PE to create an SWF file .... the only video file Muse seems to support. I hope in a future iteration of Muse, it will take FLV files or that PE will be able to export to an SWF flie.

    Read up on how to manually embed video players such as jwplayer or whatever. Merely a mtter of downloading the player skins and copy&pasting the sample code.
    Mylenium

  • No video playback in premiere elements 12

    No playback after a few mins of editing.  Tried most of the potion in the adobe troubleshooting section (http://helpx.adobe.com/premiere-elements/kb/troubleshoot-digital-video-playback-premiere-2 .html) but never got anywhere.  Most options listed are for Windows.  I have an almost new Mac with all the system requirement to run Elements 12 .  HELP, PLEASE

    bjgarciac
    I am strictly an Elements Windows user, but I do try to find common ground between Premiere Elements 12 Windows and Mac as a first pass at troubleshooting issues like the one your present.
    1. What are the properties and duration of your source media?
    Video compression
    Audio compression
    Frame Size
    File Extension
    Frame Rate
    Interlaced or Progressive
    Pixel Aspect Ratio
    Brand/Model/Settings for Camera which recorded the video would help.
    2. What did you or the program set as the project preset based on a match of project preset with properties of the source media?
    3. What have you done in the way of edits after which you have problems? What is the duration of the TImeline at that point? Is this a multi track project?
    Please explain "playback stops"
    a. The TImeline Indicator will not move from the start of the Timeline when you press Play in the Edit area monitor?
    b. Playback stops after playing back about few seconds of the Timeline content
    c. Other
    Do you have the Work Area Bar gray tabs set to span the whole content of the Timeline?
    When you are playing back your Timeline in the Edit area monitor, does your Timeline content have an orange, green, or no colored line
    over its duration?
    4. Are you running a dual or single computer monitor setup? If you right click the Edit area monitor and select Playback Quality is there any
    difference in the problem whether you set for Highest instead of Automatic?
    5. For this type of video and this type of project, would you class this problem as
    "it worked before but not now" or "it never worked before".
    Thank you.
    ATR

  • Publish+Share signifcantly reduces video quality in Premiere Elements 13

    As the title states, whenever I publish and share a video in Premiere Elements 13, the video quality is drastically reduced to an almost unwatchable level compared to the original video  This is even the case before any effects are added to the video.  If I add the media to the timeline and then directly publish+share before any changes are done, the video quality is still ruined.  When I click play full screen in elements, the quality and resolution is exactly where I want it, but once again, when I share the video, it's essentially destroyed.
    When I play the newly created video there is giant black space above, below and to the sides of the video (where there is none in the original) and movement in the movie causes the video to grain with black lines.
    I have been playing around with settings and researching online for a long time now but I can't seem to find the solution.  What I have been doing is going publish+share, ---> Computer, ---> AVI.  Then in advanced settings the video codec is selected to DV NTSC, and the basic video settings which are locked in (which I can't change) are set to quality 100, width 720, height 480.  The Aspect is D1/DV NTSC (0.9091).  I have selected render at maximum depth.  I have also tried saving it as MPEG and other video types but the result is the same.
    Any help would be greatly appreciated.  I understand that I am new and have lots to learn, but it seams so strange to me that the simple process of putting a video in Elements would essentially destroy it.  Thanks again.

    HSTompson
    It was not until Mary Lou Frost posted in your thread today that I realized that I did not see and reply to your questions in post 4 of your thread (dated December 15, 2014). Sorry about that.
    If you want to match up the properties of the export file with the properties of the Timeline source media, often you need to direct your attention to
    a. Publish+Share/Computer/......and trying to match up the video (especially) and audio compressions of the import with those of the export choice.
    b. A frequent cause of a difference between import file size and export file size is the bitrate used by these files. The higher the bitrate, the greater the quality, but
    the larger is the file size. So, trying to match import file and export file bitrates is also on the agenda. See the preset's Advanced Button/Video Tab and the settings
    there for bitrate. The units for bitrate will be either kbps kilobits per second (also seen as Kbps) or Mbps megabits per second. We can go into that further if necessary.
    Premiere Elements allows for the setting of one project preset which should match the properties of the source files. If you have "mixed source files", setting up the
    project can become a challenge. The rule of thumb that I typically use involves setting priorities...
    1. If videos and stills, I will set for the properties of the video and then size (or let the project size) the still to the frame size of the video
    2. If just stills, I try for 1920 x 1080 stills and import them using a DLSR 1080p project preset...that seems to give sharper end product results when doing burn to disc.
    Please review and consider and let me know if I have targeted your questions. Any questions please do not hesitate to ask. I try to respond daily to questions, so, if you do not see a timely, response, please send me an Adobe Forum private message asking me "What happened to you?".
    Best wishes.
    ATR

  • Multiple Hard Drives for Video Editing with Premiere Elements 8?

    I'm using Premiere Elements 8 for video editing. These are the specs I'm using:
    The camcorder I used to shoot the footage is a Sony Handycam with  model number HDR-SR12. It's a digital HD video camera recorder that  shoots in NTSC 1920x1080i HD  recording. The footage was shot with AVC  HD  9M (HQ), which records in higher image quality mode. The  video  camera is connected to my computer through a USB cable.
    The  computer  itself is a Windows 7 desktop computer. The CPU is an HP  Pavilion Elite  HPE-150f PC with Intel Core i7-860 processor. I imported  the video into  Premiere by selecting "File" --> "Get Media From"  and then choosing the third  option from the top.
    My import  option is NTSC/AVCHD/Full HD 1080i 30 5.1 channel, which matches the  specs of the camera I shot the footage with.
    Even with the patch 8.0.1 that should be preventing crashing, the program keeps crashing upon startup with one specific video project. Using the exact same video files for that project, I recreated the video, with Elements, and never ran into the problem. Both times, I had the patch installed.
    At the moment, I am using only the single internal hard drive for everything (software, OS, video editing, etc.). It is 1 TB in size. However, I am informed that one hard drive is not recommended for video editing, and that I need at least two hard drives, one for OS and one specifically for video editing. I was also informed of FireWire 800 and eSata; however, it does not appear that my computer supports eSata.
    Can this problem be resolved if I have an external hard drive and connect it to my computer with FireWire 800 (which the computer supports)? If not, what can be done so this problem doesn't arise in the future?
    Thanks for the help.

    staring-into-space wrote: My import  option is NTSC/AVCHD/Full HD 1080i 30 5.1 channel, which matches the  specs of the camera I shot the footage with.
    When you import the footage is there a red line across the whole of the timeline?
    staring-into-space wrote:
     I recreated the video, with Elements, and never ran into the problem.
    As you have the recreated project working fine I'd be inclined to put this down as a one-off glitch. If it happens again on a different project then it may be more worrying. You may want to consider using save-as to create multiple versions of your project (note this does NOT duplicate the source clips - so you won't be eating up much extra disk space). You could for example use save-as to create a daily version - ProjectName-Mon, ProjectName-Tue etc....
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children

  • Missing Visuals in video clips (Adobe Premiere Elements 10)

    When I load up my video editting program (Adobe Premiere Elements 10) everything appears fine.
    It's only when i try to load a video into the program that things go buggy.
    The Video Clip appears on the timeline. The Audio works perfectly fine. However, the video, or image for that matter doesn't appear in the "viewing screen" (can't think of the right word
    If I add a video effect to the clip (for example, Auto Color) then the picture becomes visible.
    But, when I then render the clip, the picture disappears once again.
    I'm no expert with computers or programs so i am pretty lost on what's wrong.
    The last time I used the program (which was about a week before New Years Eve, 2013)  it was working perfectly fine. I've used the program for the past year with little to no problems, so I am baffelled as to why this has happened now.
    Any kind of help would be really appreseated
    I even still have the original disc I bought when i first installed the program, so if i need to uninstall then reinstall the program it will be eailly done..
    Thanks in advanse for you help

    CreweOnTheSofa
    Along with the Intel Graphics there is something called "NVIDIA GeForce GT 640M"
    nothing more then that.
    That is probably at the core of your problems, and we need to explore this. My take on this is that you have 2 things going on here.
    1. There is an epidematic of display problems targeted specifically at the Premiere Elements 10 user whose computer uses a NIVIDIA video card. (You have Premiere Elements 10 and one of your video cards is NVIDIA GeForce GT 640M.)
    Typically the drill is to have the version of the video card driver up to date. In this case, the fix is to roll back the driver version far enough not to have the display problem. Neither NVIDIA nor Adobe has not stepped forward to correct the situation.
    Check out the following link to see what you are up against regarding the NVIDIA side of things.
    http://forums.adobe.com/thread/1317675
    2. On the other side of things, you have an integrated Intel Graphics card as well as the NVIDIA. There can be conflicts when two video cards/graphics cards are involved (independant of the NIVIDIA issue). Typically you see disabling of the integrated card, in your case the Intel Graphics. But, I am not sure where that would lead stability wise.
    You could look at both areas and see if you have displays gains for one or the other. I would look at rolling back the NVIDIA first.
    Please review, and then we can discuss this further.
    Thanks.
    ATR

  • How to remove red eye from you video with adobe premiere elements?

    I would be greatful if someone could let me know how to remove red eye from a video, which I will be using for my acting reel. Thank you!

    Ang.Fel
    What version of Premiere Elements do you have and on what computer operating system is it running?
    Do you have an integrated set of Photoshop Elements and Premiere Elements (such as 10/10, 11/11)?
    How long is this person with the red eye viewed?
    There are two possibilities that I can think of, but I would have to work it through with the actual footage and adapt accordingly.
    1. Keying and color correction.
    2. In Premiere Elements, do a freeze frame (in Freeze Frame dialog, Edit in Photoshop Elements after Insertion + Insert in Movie Option + adjustment of duration of the Freeze Frame bmp).
    In Photoshop Elements, Red Eye Tool if possible or other color correction tool there.
    How did you ever get red eye in video?
    ATR

Maybe you are looking for