Using Uberconference with Adobe Connect

Hi Everyone
I have been beating my head against the ball trying to set up Uberconference to work with Adobe Connector.
I have tried to set it up as an Audio Provider -- but I just can't figure out how to set up the dial-in steps properly.
Has anyone out there used Uberconference -- or any other 3rd party audio conferencing provider -- successfully.
Help is much appreciated!
Greg

The dial in process would be exactly the same as if you were dialing into the bridge as a participant. Most of the time it needs the following steps.
Phone number:           800-555-5555
Delay:                        3000 ms
DTMF: (passcode)     123456#
Delay:                        3000ms
DTMF:                      1 or # (for a roll call or to join the bridge)
However if the provider is not using a SIP compliant bridge, the Universal Voice tool will fail upon attempting to dial out.
Also, for the hosted environment, the phone bridge must have a toll-free number.

Similar Messages

How do I export a Keynote 09 presentation to work with Adobe Connect??

Hi - I have imported the .MOV file from keynote into Flash and then exported it as a .FLV file but the problem is that all of my 'on click' build requests have disappeared so it just plays as one continuous movie. Can anyone help me please? It seems that a .MOV file (which works perfectly with the 'on click' features) cannot be played with Adobe Connect. I really need the presentation to play with all of the 'on click' settings in place. PLEASE HELP!!! :o)

Adobe Connect does not support Apple Keynote as a file format. Adobe Connect supports Microsoft Powerpoint format. When you use the Share Document Pod and upload a Powerpoint presentation that file gets converted on the fly to Adobe Flash format and then is streamed to attendees in the room. If you want to use Apple Keynote with Adobe Connect then you should use Share My Screen and use screen sharing to share exactly what you want without converting it into Flash. Adobe Connect does not support .MOV or Apple Quicktime formatted files today (release 8 and previous versions).

Which Premier Global (Premier NA) Audio product works with Adobe Connect Pro 7.5

I am trying to set up audio conferencing on my Adobe Connect Pro 7.5 so I am able to record a discussion online. So both myself and the participants on the call would be recorded. For my audio profiles, Premier Global (Premier NA) is set up as the participating provider. Which Premier Global audio account is used with Adobe Connect Pro 7.5 so an Adobe Connect session using teleconferencing can be recorded?

Any PGi phone bridge should work. Just be sure you start the audio conference in the meeting, or Connect will have no knowledge of the call.

High quality mic on external usb-soundcard dosen't work with Adobe Connect. Why?

Hello
A friend of mine bought a quite good microphone and a good extrernal soundcard for recording podcasts. Everything works fine. But know she wants to use the microphone for Adobe Connect, because of the very good sound quality. Adobe Connect finds it an you can select it, but now singal comes into Adobe Connect. But it works with every other Adobe application. So why doesn't it work with Adobe Connect?
The soundcard is the Tascam US-122 Mk2. Normaly very uncomplicated ..
Thanks for any advice!
Alinja

I connect my bus-powered HDs (more than one) to the iMac all the time without any problems. I have found, though, that for me the FireWire enclosures work much better (faster and more stable) than the USB2 ones. I have had the USB2 drives freeze my computer once or twice when I connected the HD, but nothing like that has ever happened with the FireWire connections. (I switched the same disk from USB to a FireWire enclosure, so all other elements were kept constant in my experiments.)
One of my HD is in a MacAlly 2.5" enclosure that offers both FireWire and USB2. The other one is in some generic enclosure with only USB2. Both are bus-powered and both work fine.

Using START WITH and CONNECT BY PRIOR in a report

Hi - I am using Oracle 9i and reports 10g. Does anyone know of a reason why running my sql in TOAD will produce the correct results, but the report is dropping records? I am using start with and connect by prior to build a hierarchy of linked records. The report is dropping the "child records" and only returning records from the route level.
Thanks you for your help.

Hi user574499
Could u pls share us ur Query...?
Regards,
Abdetu...

Is it legal to buy a used laptop with Adobe software on it?

I'm thinking about buying a used laptop with Adobe CS5 Master Collection on it.
Would I be able to use this software if I wasn't the original purchaser?
How does licensing work in a situation like this?

Hi Darryl,
Provided it isn't an Education version (which are non-transferrable with Adobe), plus if you meet the other criteria for a license transfer, then it could be possible to legally do it.

Has anybody integrated Shoretel conferencing with Adobe Connect?

Has anyone integrated ShoreTel audio conferencing with Adobe Connect? If so, I would love some tips on how to do it.

James, I'm interested in this topic as well! I am not an IT person, just a user. I have Tech Support who are dealing with this. We have integrated our Shortel system 99.9% with Connect, but for some reason we can't get the DTMF to send properly. Very frustrating! Adobe has provided some assistance. Adobe wanted the SIP information (SIP IP adddress, username and password) which we set up; but my IT folks needed the correct ports that Connect wanted. This is what they sent me:
Below are the ports you
need to open to make FMG talk to your SIP server:
2222 - HTTP
8506 - RTMP
Flash Media Gateway to Internet   SRC-IP=<Server-IP>,
SRC-PORT=5060, DST-IP=ANY, DST-PORT=5060
Internet to Flash Media Gateway   SRC-IP=ANY, SRC-PORT=5060, DST-IP=<(>
<<)>Server-IP>, DST-PORT=5060
Flash Media Gateway to Internet   SRC-IP=<Server-IP>,
SRC-PORT=5000_TO_6000, DST-IP=ANY, DST-PORT=ANY_HIGH_END
Internet to Flash Media Gateway   SRC-IP=ANY, SRC-PORT=ANY_HIGH_END,
DST-IP=<Server-IP>, DST-PORT=5000_TO_6000
Maybe this will help?
Penny

Wich videocamera works best with Adobe Connect Pro?

I want to buy a videcamera to import live video in my ACP sessions. Wich videocamera works great or best?

Any camera that works with Adobe Flash Player should work well with Adobe Connect. Given the number of existing products in the market, we cannot possibly test with all specific brands and models.
Some folks in the team give some guidance around this topic in a blog post at Adobe Connect supported cameras and mic. See of this helps. Do let us know what works or does not work for you, so that the community benefits from your findings.
regards,
Ashish

I had a recent not so great experience with Adobe Connect

I had a recent not so great experience with Adobe Connect that I need you help on. Keep in mind that I tested the Connect session with the presenter the day before and Connect worked very well.   On the day of the event I opened the room to get the speaker logged in as a “Presenter”. No problems with that however I noticed that there was no “Share My Screen” button to be found anywhere. In essence I could not get him connected.
To resolve this I was forced to close out the old session and start a fresh one where I could share the presenter’s screen. Once we were going a few of the participants mentioned that they were having problems getting audio. Most online said they were fine but a few mentioned that we not getting the audio fluidly. I explained that it may be due to their bandwidth and to be patient that it would cache. Then I notice that same issue that I had talked about with a Connect technician before where all audio stops working after about 1hour into the presentation. They way I have resolved this was to log the presenter out and log him back in.
Keep in mind that I am online with 3 other computers via WiFi monitoring and seeing the presentation as the online viewers are seeing it and I can see it coming through flawlessly. So, for the few who had problems I attributed it to the lack of bandwidth in their area.   However, at 1 hour into the presentation the audio dropped out completely while the video was fine and this reflected on my machines as well. This is the continuing experience that I keep having with Connect. The total amount of people online was 9.
Now, I have a Photoshop user group meeting that will take place online this Thursday June 17th from 5 – 7pm featuring Dave Cross and we have about 200 people registered for that. It would be great if we could have one of the engineers attend that session.
I look forward to your reply.

I had a recent not so great experience with Adobe Connect that I need you help on. Keep in mind that I tested the Connect session with the presenter the day before and Connect worked very well.   On the day of the event I opened the room to get the speaker logged in as a “Presenter”. No problems with that however I noticed that there was no “Share My Screen” button to be found anywhere. In essence I could not get him connected.
To resolve this I was forced to close out the old session and start a fresh one where I could share the presenter’s screen. Once we were going a few of the participants mentioned that they were having problems getting audio. Most online said they were fine but a few mentioned that we not getting the audio fluidly. I explained that it may be due to their bandwidth and to be patient that it would cache. Then I notice that same issue that I had talked about with a Connect technician before where all audio stops working after about 1hour into the presentation. They way I have resolved this was to log the presenter out and log him back in.
Keep in mind that I am online with 3 other computers via WiFi monitoring and seeing the presentation as the online viewers are seeing it and I can see it coming through flawlessly. So, for the few who had problems I attributed it to the lack of bandwidth in their area.   However, at 1 hour into the presentation the audio dropped out completely while the video was fine and this reflected on my machines as well. This is the continuing experience that I keep having with Connect. The total amount of people online was 9.
Now, I have a Photoshop user group meeting that will take place online this Thursday June 17th from 5 – 7pm featuring Dave Cross and we have about 200 people registered for that. It would be great if we could have one of the engineers attend that session.
I look forward to your reply.

Is OnLocation available with CC service? I want to use it with Adobe Story.

Is OnLocation available with CC service? I want to use it with Adobe Story.
I have never had a copy of OnLocation, but it looks to be a great way to manage Adobe Story and the workflow for shoots.
Is there something else that is exports to that works similar to OnLocation?
help

I see that I can view Adobe Story in two locations of Premiere Pro. As a window and under File, Adobe Story (which is usually grayed out).
I have exported the script as an .astx, Opened PP and clicked file, Adobe Story, Attach Script File ; then I am not sure what to do to see it.
I clicked on Metadata but there is nothing there.
The Window, Adobe Story shows dialog and scene no. and est duration. Is that all I should see? Why the Attach Script File option? And what about seeing the schedule?
Thx Troy

Tips on using Mac OSX 10.7 Lion with Adobe Connect

Some folks have run into some audio issues when using Captivate and Presenter files playing in a Connect room after upgrading to Lion.
Apple decided to stop installing popular browser add-ins such as Java and Adobe Flash with Lion.
1. http://java.com/en/download/index.jsp to install Java for Mac
2. http://get.adobe.com/flashplayer/ to install Flash for Mac
Reboot and all should be well. Google's Chrome browser automatically includes Adobe Flash but Safari and Firefox do not so this is a necessary step.
Those that are hosting Adobe Connect on Lion Mac's will be needing a new host add-in under development. Apple has fixed the bug that was affecting the current Adobe Connect Add-in. The fix is in Apple's 10.7.2 Update coming shortly. I'm using it now and all is well again.

Thanks for replying.
When I open Pages from 'Applications', this is the screen that comes up -
Hmm, I'm slightly confused, I just right clicked Get Info on the Pages app and this appeared...
It says it was modified 2011, but its version 4.2 which didn't exist in 2011... right?
Sorry to bother you with this.

Anyone using Lync audio with Adobe Connect?

We are in talks to move from PGi integrated audio to the Lync Audio, but don't know where to start. Any pointers or info will be really appreciated. Never worked on SIP or UV in Adobe Connect environment.
Thanks in Advance.
Regards,
Amit

The dial in process would be exactly the same as if you were dialing into the bridge as a participant. Most of the time it needs the following steps.
Phone number:           800-555-5555
Delay:                        3000 ms
DTMF: (passcode)     123456#
Delay:                        3000ms
DTMF:                      1 or # (for a roll call or to join the bridge)
However if the provider is not using a SIP compliant bridge, the Universal Voice tool will fail upon attempting to dial out.
Also, for the hosted environment, the phone bridge must have a toll-free number.

Using Peerjs with Adobe InDesign

Hy,
I'm creating my own InDesign PlugIn and I need to connect to another web application I created. I tried using socket.io, but I didn't want to have another server, so I have passed to Peer JS, in this way I have a peer to peer system that would work perfectly, but I met some unexpected problems.
I'm working with Adobe InDesign CC, that uses CEP5, which has support for google chrome BROWSER (CEF (Chromium extended framework )).
In the Docs it's said that CEP5 has support even for WebRTC but when I try to connect with peerjs (wich uses WebRTC) to another peer I get a :"TypeError: undefined is not a function", under further investigation I discovered that the error is thrown by Object.Negotiator._startPeerConnection, but I can't understand what I'm getting wrong...
I tried using the same PEER JS code in another application(just a normal web site) and connecting to the same peer and was successfull, so I'm guessing that the problem is the in WebRTC support provided by InDesign.
I am not confined to using PEER JS, I just want my adobe plugin and my site to communicate in the most intelligent way possible, so any idea is welcome, however this is the piece of code of my plugin where I try to connect to the PEERJS
    var peer = new Peer({key: mySecretKey});
    var conn = peer.connect('editor-vaComeVibraEEE');//the exception is     generated here
    conn.on('open', function(){
        conn.send('hi!');
Thank's for the help... . . .

I do know next to nothing about CEP5.
Just a question: Why do you try to escape "/" in the string "editor-vaCome\/ibraEEE" ?
At least this is my guess what you want to do here…
If you want to feed the argument string "editor-vaComet/ibraEEE" to peer.connect() you cannot "escape" that slash… At least not in terms of ExtendScript.
Uwe

Raptivity compatibility with Adobe Connect 8

Just saw this thread on the Raptivity community. Thought this might be a good news for people making use of Raptivity with connect.
Cheers,
Frank.

VMware ESX 4 for Adobe Connect 9.
Source: http://www.adobe.com/in/products/adobeconnect/tech-specs.html

Need help with Adobe Connect Pro templates

Hi Everyone -
I'm working with a colleague to help her prepare a few webinars. I originally created a series of meetings for her, but she wants to use customized templates. Apparently, you cannot apply a customized template to an existing meeting; you need to select the template when you create the meeting.
My colleague reports the following:
I deleted the webinars you created in Adobe Connect so that I could re-create them with my new meeting template.
I saved the my meeting template first in "My Templates" and tried creating the meetings, but was unsuccessful at using the template. Then I tried creating the meetings with my template in "Shared templates." Still no luck.
No matter what I do, once the meeting is set up (having selected the my meeting template) and I enter the meeting room, I just get blank space and this message:
"The template you are looking at is the one we use if the default template feature is not working."
I then emailed support at Clarix and got the following, fairly unhelpful advice:
What we are assuming is a template was deleted. Now, the way templates work: There are default ones, used to create a meeting. If you use that meeting to create a template, the new template in fact relies on the previous existing template. So, you are winding up with a chicken and the egg scenario – it doesn’t know where to begin.
So, best practice – never delete a template – any template that was created based on the original will not work.
This doesn't seem to be a solution to a problem, and since I'm new to working with templates in ACP, I am wondering if anyone else out there has any advice.
Thanks in advance!
Lucy

Hi Lucy,
In order to use a meeting as a template you have to move that particular meeting into shared Template folder and then while creating any new meeting you will get an option to use that meeting as a Template for your New meeting. Also please revert with some more details so that we can look into that matter more clearly.
Also you can contact the Technical Support for Connect its free of cost the number is 18004223623
Thanks!
Swetank

Using Uberconference with Adobe Connect

Similar Messages

Maybe you are looking for