Using Unified CCX Editor in offline mode ?

Hi,
Can we use Unified CCX editor (7.0) (for IVR scripting) in offline mode ? Or, we have to connect to server and pass the authentication to use the editor ?
Thanks.

This is in theory supposed to work after you log in against the server the first time. The CCX editor is supposed to copy the license file locally and allow for offline functionality. In practice this doesn't really work reliably or at all. You might want to search for a bug on it and open a TAC case if one doesn't exist.

Similar Messages

  • Unified CCX Editor: Retrieving Sequence Number on Multi-Leg Call

    Hi
    I'm fairly new to scripting in the Unified CCX Editor, so apologies for any mistakes/misunderstandings I may have.
    I have a situation where I'm trying to retrieve and use the Sequence Number of a call within a script.
    There is a tool called "Get Contact Info" where you can retrieve the Sequence Number from the session, but this does not work for calls with more than 1 leg.
    e.g. I have an incoming call which is answered by Agent A, who then transfers the call to a seperate queue where it is answered by Agent B.
    This creates 2 records in ContactCallDetail (and other related tables) with the same Session Id, but a sessionSeqNum of 0 for the first leg, and 1 for the second leg.
    Within the script for the 2nd queue, I'm retrieving this sequence number and populating one of the Custom Variables's with it, so that I can confirm that the value is correct.  It is not!  It is always set to 0 (even if the default for the variable I'm pulling the Get Contact Info->Sequence Number into has a default value of 999.
    So, how do I get the Sequence Number?
    Any ideas?
    Thanks
    Liffey

    Hi,
    I test using the "select ressource" box, that way I am using a CSQ and it's works. Before, I was just testing with a "Redirect call" box and that is not the right solution.
    Thank you
    H.C

  • How to save and download json to make use of a app in offline mode

    how to download and save a json file from url to make use of a app in offline mode and if internet is available it should take data from url only and display it in tableview..but  for the second time it should make use of the saved json data to display the table view data in app.

    Hi,
    Using F calls a routine and not BAdI.
    If record will directly be created then there is no need to write Z program and calling it using F indicator. However, in case there is some logic which can not be written directly in the Dynamic Action then you need to write that logic in a routine and call it using F indicator.
    VK

  • Is it possible to use adobe formsCentral in a offline mode?

    the case is as following:
    during an expositon we want to use adobe forms central. the problem is that sometimes we will loose our internet connection.
    Question:
    a) Can we use the forms in an offline mode?
    b) Is there any possiblity to store a filled out form and send all the filled out forms altogether in a later phase?
    thanks for some useful ideas
    best regards
    offline

    Hi,
    If you are using FormsCentral Web form then, no.  You could use a FormsCentral PDF form; however, you will have to save each PDF form that people fill out locally (with a different filename) and then when you are online open each form and submit the responses.
          How to create and distribute a FormsCentral PDFform: http://forums.adobe.com/docs/DOC-2655
    Please try out the Formscentral PDF Form and see if it works for you.
    Thanks,
    Lucia

  • Cisco Unified CCX Editor service on CCX

    Hi all,
    How to active subj on CCX  7.0(1) ? I couldn't  find how to do it.

    What Aaron means is that it is normal that the CCX Edit service is in a stopped state.
    As far as being unable to save files to the CCX system, I assume you mean you can't access the Script Repository. Are you sure you are logging on successfully? If you log on anonymously, you won't be able to save the file.
    If that isn't the issue, can you check to see if you can save a file to the Script Repository using the CRS Editor on the UCCX system. If you can, then I would ask if you had any network ACLs floating around that may be problematic.
    HTH.
    Regards,
    Bill

  • Debug Error in Cisco Unified CCX Editor

    The error is, "Task:29000012458 AcceptStep: Trigger is not a ContacApplication Trigger".
    My impression, reading the documentation, is that the Accept trigger is ubiquitous in these types of scripts.
    What happens if I get rid of it?

    The Accept step answers the audio call for JTAPI-based contacts. Any step that interacts with a contact (e.g. Accept, Get Call Contact Info, Play Prompt, etc) will fail if you're doing an step-through debug. You will need to load the script, start a reactive debug, and then call the application trigger. This way your audio call is a contact that the Accept script can process.

  • CCX Editor Customizer Error

    I am running Windows 7 and I have installed CCX Editor in XP Mode
    The last version worked fine however when we upgraded to 7.0(1)SR04_Build443 I uninstalled the older editor and installed the new.  Now when I go to the properties of the steps I get a Error Box with the Title "Customizer Error" There is no wording in the window itself and thier is a red "X" and OK button.  After clicking the OK button it open the customize windown with the wording "Nothing to customize"  Has anyone ran into this error and know how to fix it?

    Hello All,
    I received this error msg too at uccx 7.0 sr5, i followed the wikidoc changes and then it gave another error msg of java.lan.nullpointer exception".  for troubleshooting , i followed the instructions from below mentioned link and got the problem fixed.
    http://www.cisco.com/en/US/products/sw/custcosw/ps1846/products_tech_note09186a0080b04518.shtml
    I hope, it would be useful for someone in future.
    Thanks
    Regards,
    Waqas

  • I just updated to 4.0.1 on my mac and now it says "Firefox is currently in offline mode and can't browse the web". It is not my internet since I am using Safari just fine. Any suggestions? I sure wish I wouldn't have updated!

    I just updated to 4.0.1 on my mac and now it says "Firefox is currently in offline mode and can't browse the web". It is not my internet since I am using Safari just fine. Any suggestions? I sure wish I wouldn't have updated!

    Make sure that Work Offline is unchecked: File > [] Work Offline

  • How can i redirect a queued call to a voicemail using CCX editor?

    hi buddies, i wonder how can i redirect a queued call to a voicemail of a valid extension using CCX editor?
    i just uploaded my script (does not working as i wanted regarding voicemail)if can anybody help me i will be very happy!!

    first of all i REALLY A REALLY appreciate your reply
    but two questions remain:
    a) check my attached file is this the VM pilot number?
    b) Called Address = "2133"  means that the call will be redirected to the voicemail of the 2133 extension? im right??

  • Set SPN for a local SQL Server 2008 R2 Express database used for local "Offline Mode" application

    Hi - I have tried searching the web for tips on this situation. Basically, I am trying to recreate a previous employee's client Image. This image is used for one of our companies client application that features and "Offline Mode" where it connects
    (Using Kerberos) to the local DB instead of the central DB server.
    The custom image connects without issue. I cannot seem to recreate his configuration. I am sure of these things:
    - Both images are using the same SQL Server 2008 R2 Express version.
    - Both images have the same user accounts setup.
    - Both images have "Remote Connections" setup with TCP/IP enabled in the Configuration Manager.
    - Both images are joined to the same Domain server currently.
    - Both images has the SQLServer service set to use "NETWORK SERVICE" account.
    This is the error message I get when SQL starts up for the non-working image:
    The SQL Network Interface library could not register the Service Principal Name (SPN) for the SQL Server service. Error: 0x54b, state: 3. Failure to register an SPN may
    cause integrated authentication to fall back to NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies.
    Thank you for any assistance given.

    Hi Gribbled,
    Could you please change the SQL Server Service to run under 'LocalSystem' account and restart SQL Server? Then check if the error still occurs. When the SQL Server service account is configured to use the LocalSystem account, the server will automatically
    publish the SPN.
    Alternatively, to work around this issue, you can manually create the SPN for the SQL Server Service account  using the SETSPN tool. For more details, please review this
    blog.
    Thanks,
    Lydia Zhang

  • Using both power saving mode and offline mode caus...

    So I am having a very strange problem. I have been using the Situations App (formerly Nokia Situations) to automatically put my phone into offline mode, and power saving mode over night. 9pm to 6:30am.
    Recently the phone as started refusing to leave the offline mode in the morning. Even if I try to change the profile manually it says "Unable to change profile". The only way I can get out of offline mode is to reboot.
    I uninstalled Situations, and manually put the phone into offline mode and power saving mode. By the morning I had the same issue, stuck in offline mode until reboot. So it's not the App causing the problem. I've tried a soft reset, same problem still.
    I also noticed that over-night (from fully charged before 9pm) to 6:30am I used about 70% of my charge. (A combination of power saving mode and offline mode is killing my battery!)
    I would have to go to work and immediately put my phone on charge! I.e.. 12 hours of offline + power save has drained my battery almost completely.
    Last night I decided to use the Situations App to put the phone into offline mode, BUT NOT activate power save mode.
    This morning the phone had virtually full charge and it had no problem returning to online mode. So it's ONLY if I use BOTH power-save and offline. (Tonight I will try using power-saving mode and NOT offline mode to see if it's only the power-saving mode causing the issue!)
    If I manually enter offline+power-save mode, and then try to return to on-line/non-power-save mode, relatively quickly, i.e.. Not over-night, everything is fine. It's only over night the problems start!
    Any help?
    Rob
    PS. I also have the problem where using HSPA+ causes my phone to drop from the network and stop being able to receive/make phone calls. But disabling HSPA+ works around this for now, I think this problem is unrelated however.

    I have a similar problem. My 808 PureView loses 70% of its charge overnight if I leave it in normal profile without power-saving. To deal with this issue, I started using the situations app to put the phone in power saving mode overnight. That solved the problem (although I never put my phone to offline mode). This is a weird problem because throughout the day my phone doesn't use 70% of charge, but it does overnight while doing nothing!
    I have also experienced the second problem, losing cellular and internet connection, on my 808. I have started a thread to deal with this issue.
    http://discussions.nokia.com/t5/Nseries-and-Symbian-Smartphones/Nokia-808-PureView-loses-cellular-an...
    I believe it is a firmware bug that causes this problem.

  • Terminal $EDITOR: vim normal mode can't be used due to emacs keybinding.

    I am having an issue using terminal with EDITOR set to vim that occurs in 10.6 or 10.7. The environment variable is properly configured in ~/.profile.
    On 10.5, the <ESC> key will exit insert mode, allowing the user to edit a terminal command in vim's normal mode; for instance, <b> can be used to jump backwards one word, and can be entered any number of times until insert mode is re-entered. However, after upgrading to 10.6 and 10.7, the following would occur: one instance of <ESC>  produces a modal shift, and emacs command keys can be entered (<ESC-b> will move back one word). Somehow the keyboard recognizes only the emacs keybinding, not allowing me to enter a different vim mode on the command line.
    Vim works normally otherwise. I run most everything from the command line---hence this is very frustrating. Please help me if you know how to remove the emacs keybindings from the <ESC> key so that I can use vim in a terminal.
    Cheers

    My 10.7 machine seems to behave as expected. Create a new account and see if you can reproduce the problem. If not, the problem is in your dot files.

  • Can i use the maps application already existing on my i phone in an offline mode?

    can i use the maps application -already existing in iphone 4- in an offline mode?

    No. It downloads the maps as it needs them.
    A very small portion of the map is cached in memory when offline, so you can see the last area you looked at, but as soon as you want to move the map, or look elsewhere it will need an internet connection to download from Google.
    There are standalone map apps available in the AppStore if you search for the area you want.

  • How do I switch from"Offline Mode" when using Firefox on an android device connected to the internet via Bluetooth.

    I have been using my tf300. Everytime I try to open Firefox on the tablet while using a Bluetooth connection, the only screen that Firefox opens is a generic screen displaying "Offline mode". Is there a way to switch it to online mode or am I only able to use the browser on a wifi signal??

    I am one of the individuals who use a third-party app to tether internet connection from my phone for my tablet. When using the stock browser, i have no problems, but when i try to use firefox, all the is displayed is an "Offline Mode" screen. This all would not be a problem except for the fact that a bunch of my bookmarks are on Firefox. So how do i switch settings for the pade to be "Online vs. Offline"???

  • Domain creation using WLST offline mode

    Hi,
    We are migrating from WL8.1SP5 to WL10MP2. After reading through the various options (WLST online, WLST offline, WLST.configToScript(), and Configuration Wizard) , I have concluded that we will use WLST in offline mode to create domains in our prod, qa, and dev environments. In 8.1 I had a silent script that would create domains for me repeatedly in any environment very easily. I want to map this script into the corresponding SOME_NAME.py script to be used for WL10MP2 domain.
    I have the BEA provided basicWLSDomain.py (please see below) script. I have difficulty in understanding more than half of that script! I know the basic concept is to traverse the MBean tree and creat and/or set parameters. But I do not know which MBean I will need to modify/create.
    Example 1:
    readTemplate("C:/bea/wlserver_10.0/common/templates/domains/wls.jar")
    cd('Servers/AdminServer')
    Q1] I went through http://e-docs.bea.com/wls/docs90/wlsmbeanref/core/index.html but could not find either ServersMBean or AdminServerMBean.
    Example 2:
    cd('/')
    create('myJMSServer', 'JMSServer')
    cd('/')
    create('myJmsSystemResource', 'JMSSystemResource')
    cd('JMSSystemResource/myJmsSystemResource/JmsResource/NO_NAME_0')
    Q2] What is a JMSSystemResource? (If I remember correctly, there is no such thing in WL8.1)
    Q3] What is JmsResource?
    Example 3:
    cd('/')
    create('myDataSource', 'JDBCSystemResource')
    cd('JDBCSystemResource/myDataSource/JdbcResource/myDataSource')
    create('myJdbcDriverParams','JDBCDriverParams')
    cd('JDBCDriverParams/NO_NAME_0')
    set('DriverName','com.pointbase.jdbc.jdbcUniversalDriver')
    set('URL','jdbc:pointbase:server://localhost/demo')
    set('PasswordEncrypted', 'PBPUBLIC')
    set('UseXADataSourceInterface', 'false')
    create('myProps','Properties')
    cd('Properties/NO_NAME_0')
    create('user', 'Property')
    cd('Property/user')
    cmo.setValue('PBPUBLIC')
    cd('/JDBCSystemResource/myDataSource/JdbcResource/myDataSource')
    create('myJdbcDataSourceParams','JDBCDataSourceParams')
    cd('JDBCDataSourceParams/NO_NAME_0')
    set('JNDIName', java.lang.String("myDataSource_jndi"))
    cd('/JDBCSystemResource/myDataSource/JdbcResource/myDataSource')
    create('myJdbcConnectionPoolParams','JDBCConnectionPoolParams')
    cd('JDBCConnectionPoolParams/NO_NAME_0')
    set('TestTableName','SYSTABLES')
    Q4] Can you please explain the above snippet line by line?
    Q5] Why are certain attributes set like this --- set('TestTableName','SYSTABLES') while certain attributes like below are set like this -- myq.setJNDIName('jms/myqueue')?
    Example 4:
    myq=create('myQueue','Queue')
    myq.setJNDIName('jms/myqueue')
    myq.setSubDeploymentName('myQueueSubDeployment')
    cd('/')
    cd('JMSSystemResource/myJmsSystemResource')
    create('myQueueSubDeployment', 'SubDeployment')
    Q6] What us a SubDeployment?
    I apologize for the long question. I would greatly appreciate any help!
    Thanks!
    Edited by: user10045656 on Oct 29, 2008 11:03 AM
    Edited by: user10045656 on Oct 29, 2008 11:06 AM

    1 - What is the best way to create a schema, for reporting application, during automated domain build process as we need to create new domains from the script and also be able to start and deploy applications on it. which will also require to have db schema for reporting application.
    My suggestion would be to execute the scripts under /neelapu/bea/post31/RC4-samples/osb_10.3/dbscripts/oracle/*.sql with your automated process. OSB requires two simple tables WLI_QS_REPORT_DATA and WLI_QS_REPORT_ATTRIBUTE.
    If reporting is not required then we can modify (I guess) in wlst offline mode to delete the below applications from domain.
    <app-deployment>
    <name>JMS Reporting Provider</name>
    <target>osb_server1</target>
    <module-type>ear</module-type>
    <source-path>/neelapu/bea/xyz/load4/Oracle_OSB1/lib/common/jmsreportprovider.ear</source-path>
    <deployment-order>125</deployment-order>
    <security-dd-model>DDOnly</security-dd-model>
    </app-deployment>
    <app-deployment>
    <name>Message Reporting Purger</name>
    <target>osb_server1</target>
    <module-type>ear</module-type>
    <source-path>/neelapu/bea/xyx/load4/Oracle_OSB1/lib/common/msgpurger.ear</source-path>
    <deployment-order>126</deployment-order>
    <security-dd-model>DDOnly</security-dd-model>
    </app-deployment>
    Thanks
    Manoj

Maybe you are looking for