Using unloading point in MB1A mvt type 291

Hi,
How can I make the unloading point available for entry during goods issuance (MB1A) mvt type 291? I can't find the unloading point in the screen layout design in the Goods Issue folder in SPRO and I can't add the unloading point field in the movement type config.
By the way, when creating reservation order using the same movement type the unloading point is available for entry.

HI
Go to OMJJ and select the 291 movement type and in field selection Enjoy you can add the the particular field ( Unloading point) and you can make here optional and required entry by selcting radio button. Check the field and add.

Similar Messages

User Exit at the time of MB1A mvt type 262

Hi
I want to introduce exit at the time Process Order reversal through MB1A with mvt. type 262.
At this I require check reversal is not more than consumption qunatity.
Please suggest any one.
Regards
ARK

Dear ,
Tell your ABAPer to implement user exit 'CONFPI02'.Table used is 'RESB' .Or Goto SMOD and Enter MBCF* and execute , which will display you all the User exit .Search the User eixt which will be applicable in your case .
Refer this : Enhancement in MIGO for Goods Movement
Regards
JH

Where use ID Point - a special Sotrage Type in WM?

Hi, guys,
I know what's ID Point as well as how it works...but I have no idea which scenarios I should use ID Point? i.e. why I need to transfer a SU to the ID Point first and then transer it to the final storage type? would anyone pls advise? Thanks.

see the helpp below
http://help.sap.com/erp2005_ehp_01/helpdata/en/c6/f846c44afa11d182b90000e829fbfe/frameset.htm

Adding the Unloading Point Field in Goods Issuance Transaction (MB1A)

Good day,
Is it possible to activate the unloading point field in the Goods issuance transaction code (MB1A)?
As per checking, the unloading point field can be used if we will do the good issuance transaction with the use of Reservation Orders (created in MB21)
Is it possible to make use of this field without using reservation orders?
Thanks.

Hello Roberto,
check transaction OMBW, here you can customize available fields depending on movement type.
Best Regards, Dirk

Changing unloading point using BAPI

Hello Gurus,
                     Can we change unloading point(item level) in the sales order using BAPI_SALESORDER_CHANGE. If so please let me know how to do it.
Thanks,
KB

Did you use BAPI_TRANSACTION_COMMIT after BAPI_PO_CHANGE.
Look also at this <a href="http://www.sap-img.com/abap/sample-abap-code-on-bapi-po-change.htm">Sample Abap code on BAPI_PO_CHANGE</a>
CALL FUNCTION 'BAPI_PO_CHANGE'
    EXPORTING
      PURCHASEORDER = T_POHEADER-PO
      POHEADER      = T_BAPI_POHEADER
      POHEADERX     = T_BAPI_POHEADERX
    TABLES
      RETURN        = T_BAPIRETURN
      POITEM        = T_BAPI_POITEM
      POITEMX       = T_BAPI_POITEMX.
READ TABLE t_bapireturn WITH KEY type = c_err TRANSPORTING NO FIELDS.
IF sy-subrc NE 0.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
      EXPORTING
        wait = c_x.
ENDIF.
Regards

Reversal of Mvt type 552(MB1A) still doesn't reflect in the Process order

Hello Experts,
When i create in MB1A using 551 movement type(scrap), i fill the required entries Cost Center and Proces order then saved it. Checked the process order cost analysis (GO TO- COSTS - ANALYSIS- TARGET ACTUAL COMPARISON)there were values appearing in my total/actuals cost column.
Then my issue is if i want to reverse the said document generated from 551 movement type using tcode MB1A or MBST, the value in the cost analysis is not changing((GO TO- COSTS - ANALYSIS- TARGET ACTUAL COMPARISON) in the process order.
The reversal is done so it should be zero and no value is appearing in the cost analysis column.
Also if you will check in the Process order- GO TO-LISTS- DOCUMENTED GOODS MOVEMENTS , the mvt type 551 only appears and no 552 even the cancellation is already performed.
Thanks,
Indra

Which version of SAP are you using?
Could you please perform same action in development using MIGO transaction code.

Automatic creation of Batch using mvt type 311

when i am trying to transfer material from one storage location to another using mvt type 311. the system is not creating the batch automaticcally.
I have already maintained allthe basic configuration required for this.even in IMg ->logistic general->batch management---->creation of new batch in this path also for mvt type 311 i mainatined (automatical/manual without check)batch creation.but still the system is not generating the new batch.
Can anybody help in this issue.
Thanks in advance

Hi,
When you do transfer postings, SAP will set the batch number same as the one from which you are issuing the stock. To avoid this you can set the creation of batch to B (Automatic/ Manual with check in user exit)
You need to use following user exit at batch creation
EXIT_SAPLV01Z_001
EXIT_SAPLV01Z_002
Hope this helps, reward if useful,
Best Regards VS

How to stop user from using 961 mvt type in MB1C transaction code?

Hi Friends,
We have two companies. Already we have restricted end user for using 961 & 962 mvt type in MB1C transaction code in one company code 1000. Now, we want to restrict end user for using 961 & 962 mvt type in MB1C transaction code in other company code 1200.
I have checked configuration using OMJJ transaction. But, it is there so there may be some different way of control.
Can any body help me?
Regards
Siva

Hi,
To restrict/block the movement type, the steps are:
1. use transaction code OMJJ.
2. Enter the movement type you want to block.[From 961 To 961](do for both961& 962)
3. Select the Second option in the List which appears in the left. (Allowed Transaction).
4. Remove the transaction codes (MB1C)from where you do not want to use that particular movement type& save.
For user specific to block the movement type, pl consult Basis Consultant.
Regards,
Biju K

Unloading Points - How is it used?

Hi Gurus,
I would like to inquire on how the unloading points is used in a sales order. For example I set the unloading point in a customer 10001 to Thursday. Now I create a sales order using the said customer and then set my Requested Delivery Date to 10/27/2010 however that day is a wednesday and now considering the loading date and material availability date (let us say 5 days), so the date my material can be confirmed should be 11/04/2010. But this does not happen. Am I missing something?

Hi,
By means of unloading pnt, the good can be unlaoded at customers place on the specific days that are set in cusomer master-->unloading point. Pls try, it must happen in ur case as well.The system check the unloading point data if maintained, in customer master and use it in the order.
Rgrds
Deep Jain

BAPI_GOODSMVT_CREATE used with mvt type 105

Hi,
That is easy.
Somebody has worked with the mvt type 105* and the BAPI_GOODSMVT_CREATE in the same development?
Release GR blocked stock for warehouse
I am trying to use this combination but it does not work.
Thanks in advance.

The message is:
M7 036 - No goods receipt possible for purchase order 4500001156 00000
Let me explain my process.
The users creates a goods receipt with mvt type 103 (blocked) and, in another moment, they will make a mvt type 105 (release). I am trying to convert it to an automatic process using a BAPI for this, but it does not work.
That is my problem,
Thanks in advance.

Goods Issue not possible with ref to Reservation using 201 mvt type when reservation created by 311 movement type

HI MM Folks,
My requirement is reservation should be created with 311 movt type. When we do good issue with 201 movt type with reference to reservation
system is throwing an error "Goods movement not possible with mvmt type 311". Due to MRP run we should create a reservation using 311 movement type but not 201 mvt type, (If we create a reservation 201 movt type, during MRP run automatically reservation quantity also taking into consideration, to avoid this we will be creating reservation as 311 movt type). Is there any enhancement to available to reach the requirement. If it is possible give me guidelines.
your help will be highly appreciable.
Regards
Vinay

Dear,
Movement type 311 is for doing transfer posting from storage location to storage location with single step.But Movement Type 201 is to have consumption entry with respect to cost center etc...
You are creating a reservation using 311 movement type and while posting the entry you are selecting the"Executable action in MIGO" is "A08-Transfer Posting" so system will always use the movement type used at the time of reservation only.Here you can not change.
And more over if you process entry with 201 movement type system creates accounting documents but with movement type 311 system will not create accounting documents.
Regards,
Pardhu

Create a Quality Stock directly using 501 mvt type

Hi ,
I am trying to map one scenario in which when i do the goods receipt using 501 mvt type in MIGO the stock should directly go in to the QM inspection
A inspection lot should be created automatically for result recording.
when i am doing 501 mvt with Stock type Quality Inspection the system giving me an error as below
Change the inspection stock of material ISUUS6-M-W-1IN-10 in QM only
Regards
Amar

Hi,
        1) Activate 05 inspection Type in the qM view of the material master
        2) Do the GR with Mvt type 501
        3) Inspection lot is created
With regards
Yas

USER EXIT/BADI for blocking pop up in VA01/VA02 for unloading point

Hi,
Please see details below with an example
Following the below steps will execute the popup.
1. VA01 (Sales Doc Create)
Document type can be anything.This pop-up should be blocked for 'CRQ' and 'CR' types.
2. Input CRQ or CR in the Order Type field and execute.
3. Within the document:
Input customer 194 as the Sold-to and Ship-to parties
Input the PO Date field with todays date
Input material 475410m and a Target Quantity of 1
Press Enter
If the ship-to party has more than one unloading point a pop up would show both values to choose one(these values come from KNVA-ABLAD).
The code details are as follows:
Program SAPMV45A--> Include MV45AF0K_KUAGV_SELECT---->CALL FUNCTION 'VIEW_KUAGV'
2)CALL FUNCTION 'VIEW_KUAGV' uses CALL FUNCTION 'SD_PARTNER_SINGLE_MODIFY' for ship-to(WE)
3) IN FM 'SD_PARTNER_SINGLE_MODIFY' the following sub-routine is called:
*-- proceed inserting a partner -
create a new xvbpa-segment
PERFORM XVBPA_ENTRY_FILL USING LVF_VKORG LVF_VTWEG LVF_SPART
LVF_VBELN
fif_posnr
LVF_KUNNR_NEW
FIF_MANUAL_ADDRESS
FIF_MANUAL_ADDRESS_ORIGIN
FIF_PARVW FIF_PARGR
LVF_PARTNER_USER
FIF_KNREF_PARNR
FIF_PRFRE
FIF_BOKRE
FIF_HISTUNR
FIF_HZUOR
FIF_NO_DIALOG
LVT_XVBADR
LVF_ACTION_TODO
LVS_OLD_XVBPA-CNTPA
CHANGING LVS_NEW_XVBPA
LVT_XVBPA.
4)This subroutine uses FM 'SD_PARTNER_ABLAD_SELECTION' to determine unloading points for ship-to and also brings up the pop-up using 'REUSE_ALV_POPUP_TO_SELECT'.
partner is ship-to, so determinate unloading point
CALL FUNCTION 'SD_PARTNER_ABLAD_SELECTION'
EXPORTING
FIF_KUNNR = LVS_XVBPA-KUNNR
FIF_NO_DIALOG = LVF_NO_DIALOG
IMPORTING
FES_KNVA = LVS_KNVA
EXCEPTIONS
NO_UNLOADING_POINT = 1
NO_SELECTION_DONE = 2
OTHERS = 3.
LVS_XVBPA-ABLAD = LVS_KNVA-ABLAD.
Any help in this regard is highly appreciated.
Sincere Regards,
Sai.

Have a look at below link which gives the details abt the user exits related to VA01/VA02.
http://help.sap.com/saphelp_46c/helpdata/en/1c/f62c7dd435d1118b3f0060b03ca329/content.htm
Best Regards,
Vibha
*Please mark all the helpful answers

Storage location is not updated after posting GR with Mvt type 107(Valuated GR blocked stock)

Hi experts,
Before posting GR through Movement type 107 (valuated GR blocked stock) we can see the storage location field in MIGO screen and able to enter value into this field. But after posting GR when we retrieve the material document we are finding that the field (storage location) is blank, i.e. it's not updated at all. When we check the stock in MMBE we find that no quantity is updated for valuated GR blocked stock.
We want the storage location to be updated while posting GR with 107 Mvt type.
Any idea Please?
Points assured.
Thanks
Amitava

SAP describes it in help.sap.com: Since the material is not to be added to the inventory yet, do not enter a storage location.
If you require a storage location, then I assume that your design does not match with the design of SAP, you are using a function to solve a gap which is not foreseen by SAP for this case.
Especially the 107 is usually representing stock which is still in transfer but you are already the legal owner and have to show the value of those goods in your books.

Goods Issue Problem - Mvt Type 645

I am trying to do Goods Issue - VL10B.
Error message showing:
1)Delivery has not been put away/picked (completely)
2)The Storage location is not defined for delivery item 000010
it is a single step automatic GR (Mvt Type 101). The material to be posted (XFF38) is a non valuated material with Accounts Assignment. We are trying to post the stock directly to consumption.
Please help me
Edited by: Vijay Kakani on Feb 25, 2008 4:26 PM

Hi
a material is intended for consumption/usage, the order contains an account assignment (for example, a cost center, project, sales order, etc.). For items to be posted directly to consumption/usage, Production or MRP, you can enter a recipient or an unloading point in the order. Both specifications are automatically proposed by the system during entry of the goods receipt. Note that you can change the unloading point, but not the recipient.
if underdeliveries are allowed in the system, then The system interprets the quantity received as a partial delivery and accepts it as such. The system issues a warning message indicating that there has been an underdelivery.
It is also possible to enter an underdelivery tolerance percentage in the order item. When a quantity of goods is received that lies within the underdelivery tolerance range, the quantity is interpreted as a partial delivery and is accepted as such. The system does not issue a warning message. If the quantity of goods received lies below the underdelivery tolerance, the system issues a warning message.
If the underdelivery is not a partial delivery but a final delivery, you have to set the "delivery completed" indicator.
In the Customizing system, you can define that the "delivery completed" indicator is set automatically if the underdelivery lies within the tolerance limits. In this case, the system interprets any underdeliveries within the tolerances as final deliveries.
check the configuration for under delivery tolerance
Hope this helps
BR
SK

Using unloading point in MB1A mvt type 291

Similar Messages

Maybe you are looking for