Using unlocked 3g on cdma/hspa network

I purchased an unlocked refurbished iphone with the intention of using it on the koodo network in Canada. It is primarily a cdma network, but uses its parent company's hspa network.
I realize that cdma isn't supported on the Iphone 3g, but thought hspa would work. And it did at first, but soon after started losing service and failing calls at every turn. The sim card isn't at fault, as I've since installed it in an Inq phone which works fine.
Here's my question: is there any way of knowing if the phone or the network is at fault? I would hate to switch to a gsm provider only to find the problem remains. The long distance rates on koodo are the lowest anywhere...

mmcva wrote:
I purchased an unlocked refurbished iphone
I didn't realize that there were "refurbished" iPhones available from Apple. That's beside the point however.
mmcva wrote:
using it on the koodo network in Canada. It is primarily a cdma network, but uses its parent company's hspa network.
I realize that cdma isn't supported on the Iphone 3g, but thought hspa would work. And it did at first, but soon after started losing service and failing calls at every turn. The sim card isn't at fault, as I've since installed it in an Inq phone which works fine.
Here's my question: is there any way of knowing if the phone or the network is at fault? I would hate to switch to a gsm provider only to find the problem remains. The long distance rates on koodo are the lowest anywhere...
As for the rest of your question, Koodo says on their website that they do not support MicroSIM cards or the iPhone 4 & iPad. Not sure if that is because they don't offer microSIMs or if there is some sort of incompatibility. Koodo's network is just Telus who do offer the iPhone (4 & 3GS), using 3G only and on the compatibility website for koodo they do say that the iPhone 3g is supported.
http://koodomobile.com/en/ab/phonecompatibility.shtml
You could always borrow a microSIM card from a somebody with an iPhone 4 or other phone with a MicroSIM and see if that works in your unlocked iPhone. If the iPhone was purchased from Apple a refurbished unit should carry the same warranty as a new unit, so you could always book a genius appointment to have it troubleshooted.
You could also try updating to iOS 4.2 to see if that helps. If the iPhone was not officially unlocked updating will restore it to factory settings and the unofficial unlock will be lost potentially forever.

Similar Messages

  • Can I use IPAD in any CDMA EVDO network

    Can I use IPAD 2 3G+WiFi in any CDMA EVDO network?

    qTzaman wrote:
    Can I use IPAD 2 3G+WiFi in any CDMA EVDO network?
    Be more specific. Verizon's iPad2 wifi+3G works on the Sprint CDMA netwok. You need a Sprint dataplan to use Sprint's network.
    What provider are you asking about?

  • How 2 use unlocked Iphone 4S in CDMA&GSM

    I need to use 4S Iphone in CDMA and GSM networks different times.
    CDMA mode - preffered, GSM mode - switch on demand, if I need to commit a call or visit non CDMA zone with LOCAL provider SIM?

    A CDMA phone cannot be unlocked.
    The GSM side of a combination CDMA/GSM iPhone can be unlocked, but not with the CDMA side.

  • HT3939 I may want to use iPhone 5 for CDMA network in Myanmar.

    We understand that iPhone 5  (model A1429) can be used for GSM and CDMA network.
    We used normal SIM card for CDMA net work. I will request nano sim card  telecom to use in iPhone 5.
    Please confirm that A1429 model can use for Myanmar CDMA network.
    Thank

    No.  The CDMA section of the phone is permanetly locked to a specific CDMA carrier such as Verizon or Sprint. IT can't be unlocked and used elsewhere.

  • I have recently unlocked my iPhone 4. I got the comforation saying it was unlocked. For some reason I cannot access my network settings? Any suggestions. I am trying to use the phone on Net 10 network.

    I recently unlocked my iphone 4. I am trying to use it on Net 10's network. However, i cannot access the network settings. I have the Net10 Sim already in it. A few notes listed below of what i have tried:
    1.) I downloaded the iphone configuation utility. But  cannot get the right settings to apply. (so if you have the correct ones i could use those)
    2.) i have watched 1000 youtube videos and been on practically every page online and tried 1000 different versions of APN settings through the configuration
    3.) I do not have another SIM card from another carrier to try.
    Open to suggestions on how i can get the APN settings to change. Not worried about picture messaging or anything, but would like my internet to work. Calls and text work fine.

    i have seen this option..problem being...i dont have access to WIFI i live in the middle of ten buck too! We cant even get internet out here i have to go a friend house to get internet. I was going to try that once i did get to town but was looking for other options here at home frist.

  • I used to be a softbank Japan Iphone 4 customer and i had cleared all the dues. Now i don't have softbank contract and i am in my country Nepal. How can i unlock and use my Iphone here in Nepalese Network ?

    I used to be a softbank Japan Iphone 4 customer and i had cleared all the dues. Now i don't have softbank contract and i am in my country Nepal. How can i unlock and use my Iphone here in Nepalese Network ?

    Hi Edward,
    You should still be able to manually manage the music on your iPhone within iTunes. Make sure that when your iPhone is plugged in, look in the Summary tab to see if “Manually manage music and videos” is enabled and you can even you turn off Automatically Sync when this iPhone is connected. Take a look at the first article below to give more information on that. As far as your other questions about calling someone, I have provided two options for you. If it is for feedback on iTunes, you can use the second link to give detailed feedback on what is going on. If you want to actually talk to someone, the last link has a list of numbers for you to call for any support or service that you may need.  
    Manage content manually on your iPhone, iPad, and iPod
    http://support.apple.com/en-us/HT201593
    Product Feedback
    http://www.apple.com/feedback/
    Contact Apple for support and service
    http://support.apple.com/en-us/HT201232
    Take it easy,
    -Norm G. 

  • I am thinking to buy an Iphone 4s from USA. So I just want to know if I buy an unlocked phone will I able to use it in India with vodafone network. Can u also suggest where to buy the unlocked iphone 4s in USA.

    I am thinking to buy an Iphone 4s from USA. So I just want to know if I buy an unlocked phone will I able to use it in India with vodafone network. Can u also suggest where to buy the unlocked iphone 4s in USA.

    Thanks for ur reply. I will make sure that I buy 4s from nearest istore in USA where unlocked phones are also available. And yes I know about the warranty which is applicable only in USA. Ur reply has been very helpful for me thanku

  • HT4108 I have an iPhone4, used and locked to the UK network. I need to pay for the phone to be officially Unlocked. In the meantime we used it as a device to check emails and games etc.. We put a pass lock and after many failed attempts we forgot what it

    I have an iPhone4, used and locked to the UK network. I need to pay for the phone to be officially unlocked.
    In the meantime we used it as a device to check emails and games etc.. We put a pass lock and after many failed attempts we forgot what it is. Now the phone is Disabled and iTunes can not fix it since it can not update the Software without the phone being officially unlocked..
    any idea how to do this?
    Please advice

    gencml wrote:
    We put a pass lock and after many failed attempts we forgot what it is. Now the phone is Disabled and iTunes can not fix it since it can not update the Software without the phone being officially unlocked..
    any idea how to do this?
    Please advice
    You need to visit Apple Store, and show ownership proof in case of forgotton pass code.

  • Can't send e-mails using Versamail 4.0.1 form my Palm Centro (unlocked - from ATT - on Rogers network).

    Good afternoon. I am using a Palm Centro I just bought (unlocked - from ATT - on Rogers network). All is working great BUT sending e-mails. Versamail is receiving just fine but refuses to send. It puts everything I try to send into the "outbox" and then tries to send only to later tell me that it unable to send. The server I go through is a POP server. It has never given me such an issue before - Any advice!!
    Steve 
    Post relates to: Centro (Unlocked GSM)
    This question was solved.
    View Solution.

    Hello!
    With POP/IMAP email, there are 2 server.  One is incomming to whihc ur ok and the other is outgoing to which that one is not.  Since you are using Rogers for service, use the SMTP server from them to which I do belive is still smtp.rogerswirelessdata.com for the outgoing mail server.
    Even though the phone has been unlocked, the phone design is still ATT so the versamail application is probably still using ATT's SMTP by default and you need to make the manual change. 
    Message Edited by thetreoguy on 05-12-2009 04:41 PM

  • HT3939 Would be possible to buy a contract free unlocked iphone 5s from USA & use it overseas over a GSM network?

    Would be possible to buy a contract free unlocked iphone 5s from USA & use it overseas over a GSM network?

    Yes.
    Only Apple sells officially unlocked iPhones in the US, & the T-Mobile labeled iPhone is officially unlocked if putchased from Apple.
    But, your warranty/support will only be valid in the US, & the phone will most likely not support LTE anywhere other than North America.
    Any issues, no authorized source, outside of the US, will touch the phone, or help you in anyway.

  • If i buy an iphone 5s sprint can i use it for CDMA? I ask that because i went out of the country one time and used it on a CDMA network but that was my iphon 5 not an i phone 5s.

    if i buy an iphone 5s sprint can i use it for CDMA? I ask that because i went out of the country one time and used it on a CDMA network but that was my iphon 5 not an i phone 5s.

    Sprint is a CDMA carrier, same as Verizon so it will work on CDMA.

  • Unlocked, yet password-protected wifi networks render email/apps useless

    Email and apps work great at home where I have a wifi connection on my home wireless router. But when out and about, unlocked (yet password protected) wifi networks (like Optonline) render apps useless. In short, email and apps are trying to connect to the wifi network (since it's unlocked). But in order to actually connect to it, you need to sign in via Safari first.
    Shouldn't the iPhone be "smarter" and know that if a wifi connection is locked OR password protected, it should simply go ahead and use 3G? Otherwise, you need to manually turn off wifi and force the iPhone to use 3G.
    Anyone else experience this? Any suggestions?

    If you have previously connected your iPhone to such a wi-fi network - which you must do first before entering the required password via the Safari webpage before you have internet access via the wi-fi network, your iPhone will automatically connect to the wi-fi network when returning within range of the network.
    If you don't want to use such a particular wi-fi network for internet access, which the provider for the network requires entering a password via a webpage before having internet access via the wi-fi network, remove the wi-fi network from your iPhone and don't join the network when returning within range of the network.
    When within range of the network, which your iPhone will automatically connect to if you have previously connected to the network if wi-fi access is on, select the right facing arrow in a blue circle icon to the right of the network and at the next screen for the wi-fi network settings, select Forget this Network, and don't connect to the wi-fi network when returning within range of the network. If you want to use the wi-fi network for internet access, you must enter your password to access the internet via the wi-fi network, which requires connecting to the wi-fi network first.

  • How do i use my time capsule as a network to store files, etc.?

    How do i use my time capsule as a network to store files, etc.?

    There is no difference in setup..
    Only trouble.. be warned this is quite problematic. With Mavericks even more so.
    See Q3 here.
    http://pondini.org/TM/Time_Capsule.html
    Take particular note. The TC is not a NAS or file server.. it can be pressed into use as one.. but will suffer..
    1. Slow spin up of the disk and fast spin down. Causing streaming and library issues with itunes.
    2. iphoto is easily corrupted.. don't move it to a network drive at all.
    3. no backup.. the TC cannot back itself up.. it is designed as a backup target for Time Machine. but Time Machine cannot backup network drives.. and nor did apple build in a backup.. it was never needed. After all it is a backup.. not a file store.
    4. you cannot partition it. You will have issues with TM if you do store both data and TM backups on it.
    5. You can use USB drive plugged into the TC, and experience a new definition of pain and suffering.. well slow file transfer anyway.
    Good luck.

  • I have an Airport Extreme as my router and am using time capsule to extend the network in my new house. My ISP is only providing me 4-5 ip addresses and wants me to set up my router to issue out new ip addresses for all my devices.How do I fix this?Help

    I have an Airport Extreme as my router and am using time capsule to extend the network in my new house. My ISP is only providing me 4-5 ip addresses and wants me to set up my router to issue out new ip addresses for all my devices.How do I fix this?Help.
    They said I need to change my settings to NAT settings. I haven't been able to figure out or find anything. I have also spoken to Apple Support on the phone for hours without being able to figure out how to do this ( i don't think he knew much either lol.) Please help me because I've got about 15-20 devices in my house that require to be connected to the internet and this is just making things ridiculously slow and painful for me.
    Thanks!

    It is on DHCP & NAT under router mode yet my isp is still the one issuing ip addresses to my devices instead of the router issuing them

  • HT204053 Enter the Apple ID you want to use for iCloud in Control Panel Network Internet iCloud.  Enter the Apple ID you want to use for store purchases (including iTunes in the Cloud and iTunes Match) in iTunes iTunes Store.

    Enter the Apple ID you want to use for iCloud in Control Panel > Network > Internet > iCloud. 
    Enter the Apple ID you want to use for store purchases (including iTunes in the Cloud and iTunes Match) in iTunes > iTunes Store.

    Welcome to the Apple community.
    iTunes and iCloud and different accounts, you will need to delete both accounts from your device before adding the new details in their place.
    For iCloud go to settings > iCloud, scroll down and hit the delete button. You can then sign back in using your correct details. For iTunes go to settings >store, tap your account ID and then sign out, you can then sign back in using your correct Apple ID.

Maybe you are looking for

  • How to display HTML files using ABAP Webdynpro?

    Hi, I have a html index file and a bunch of other files accessed by the index file  in a specific directory on the SAP server. I'd like to display the index file via ABAP webdynpro and allow the users to click on what they need to see. How can I achi

  • Using IO to create a Combo Box

    Hello, I have failed to find any examples on how to do the following, and have not yet figured out how to do it msyelf. I want to add the entire contents of a file containg a list of people's personal numbers and their names to a combo box that is th

  • Eterm crashes - malloc(): memory corruption (fast): 0x08080318

    Lately Eterm started to just "disappear" from the screen. I checked the ~/.xsessionerrors and the last messages are: *** glibc detected *** Eterm: malloc(): memory corruption (fast): 0x08080318 *** ======= Backtrace: ========= /lib/libc.so.6[0xb7ac9c

  • Sites are not shown in full

    Some websites that requires password to open are not loading, and some websites with drop down menues are not showing all functions as well.

  • How to set default dateTime format ?

    Hi..All when I query data in date field. I need it show on 'yyyy-mm-dd hh24:mi:ss' format, How I should do? it not means using SQL>select to_char(sysdate,'yyyy-mm-dd hh24:mi:ss') from dual; But I want to using only: SQL>select sysdate from dual; and