Using upgrade from another family plan

My family has 2 family plans. 1 with 4 phones and 1 with 3 phones. All under same account person. Although, 2 seperate bills. Question, can i use a upgrade from one of the numbers on the plan that I am NOT on?

Probably not directly.  The easiest way would be to just upgrade that line normally with your choice of phone, and then activate it on the line that used the upgrade briefly.  After that, they have accepted the new contract and can swap back to their old phone, freeing the new device to be activated on any Verizon line.

Similar Messages

  • Using an available upgrade from another family member on my plan???

    Hello all,
    I want to upgrade my 3G to the 3GS. I have an AT&T Family Plan. My wife's V1 iPhone account is upgrade available now.
    I want to give her my 3G and use her upgrade on my new 3GS......
    I was hoping to just upgrade her phone, then later swap SIM cards to get our phone numbers straight. Ive done this with other phones in the past, but I think that iPhone is SIM specific......
    How should I try to make this happen without confusion. I don't want to overwhelm the local AT&T store salesman.
    Your advice would be appreciated.
    Thanks
    Donald

    I have been able to switch iPhones with someone on my family plan, trading 3G for 2G. I also want to buy 3GS using one line that is eligible for upgrade and then trade phones so I get the new one. I was planning to activate it from home on the eligible line, then backup, swap sims, then restore. This is procedure I had used before and worked swapping 3G and 2G phones. I think as long as they really want to get you for a 2 year contract, so may not matter what phone you have, as long as you also pay the new $30 data charge.

  • How to move from one family plan to another within Verizon?

    My son currently is part of one family plan we have which is for non-smart phones.  It is a really old plan and a really old phone.  I also have another family plan (share everything) for my Galaxy S3 (no other people on that share everything plan yet).  Here is what I want to do:
    1) get him a new Galaxy S4 through Amazon
    2) put him on my share everything plan (share my data, and pay $40/mo for phone service)
    3) but keep his existing number.
    Is that possible?  It does not seem possible using the Amazon online system.  When I try to add another line of service on my Share Everything plan and port his number, it says not possible to port from Verizon to Verizon.  Do I have to leave Verizon and go to ATT in order to port numbers? 

    You will probably have to call customer service and get their help transferring the line between the two accounts. Are both accounts listing you as the account owner?
    If they have two different account owners you will probably have to do an Assumption of Liability instead.

  • I have the new iOS 7 and am getting texts from another family members phone and they are getting mine how do I disable this without changing accounts

    I have the new iOS 7 and am getting texts from another family members phone and they are getting mine how do I disable this without changing accounts

    Welcome to the Apple Community.
    You could simply set each device to only use a single telephone number (settings > messages > send & receive, but this isn't really an ideal solution since the other person can always change their settings and see your messages and send messages that appear as if they are from you. There is only one real solution and that's to have your own accounts.

  • How to transfer a number from a family Plan to a personal account?

    I need to transfer a # from a family Plan to another person outside the plan

    http://www.att.com/esupport/article.jsp?sid=KB94735&cv=820

  • I stopped using iCloud after another family member received all my contacts. Now I want to restart using iCloud. How do I prevent this happening again? We share the same Apple id password and credit card but different usernames.

    I stopped using iCloud after another family member received all my contacts. Now I want to restart using iCloud. How do I prevent this happening again? We share the same Apple id password and credit card but different usernames.

    If two of you shared the same contacts you were logged in with the same Apple ID. In order to avoid this you need to use different Apple IDs, and be using separate Macs or separate user accounts on the same Mac.
    One or other of you should create a new Apple ID at http://appleid.apple.com for which you will need a non-Apple email address which hasn't been associated with another Apple ID.

  • I have the new iOS 7 and am getting texts from another family members phone and they are getting mine how to I disable this ??

    I have the new iOS 7 and am getting texts from another family members phone and they are getting mine how to I disable this ??

    You each need to have separate Apple IDs and separate user accounts. Better yet, separate computers as well.

  • Can we use Result from another query in Webi using Bex uery universe?

    Hi,
    Can we use Result from another query filter option in Webi to create a report using a Bex Query universe?
    I need to create a report using two universes, one is Bex Query Universe and the other is Orcle universe. I have two queries, one is using Oracle universe; the other using Bex Query universe. I need to pass the Oracle data from the Oracle query to the Bex Query query to get the matched data from SAP Bex query.
    I used Result from another query in the query filter panel for the query using Bex query universe. But I got an error saying that 'A filter contains a wrong value. you cannot run this query. (Error: WIS 00007). The data used in the filter on both sides are the same. they are char.
    I have tested by using two queries from the same Bex query universe to see if the Result from another query filter option works. And I got the same error.
    Has anyone run into the same issue and if this is possible and what should be the solution?
    Thanks in advance!
    Edited by: BO_Haiyan on Oct 6, 2010 3:47 PM

    In that situation:
    Create two queries : Oracle and BW query.
    @ Report:
    As you have to see result set from both the Dataproviders, correct? To achieve thise one must have common dimension objects to merge them at report and use Objects those are coming from both queries to use them in single Table/Report.
    Unless you don't use Merge Dimensions, you don't get a chane to use both queries objects in single Table/Report. (It will give tooltip saying: You can't drop here -- Incompatable Objects)
    In case, if you don't have common dimensions, change object definitions to Detail objects, for those required.
    Hope it helps you.
    Thank You!!

  • Hey guys I got a used iBook from a family friend who had it password protected and he doesn't remember the password.Is there a way to get around this without wiping the computer?I don't have any of software discs and can't update or delete anything.Thanx

    Hey guys I got a used iBook from a family friend that has it password protected.I can't update or delete programs or download anything without the passwords and he doesn't remember them.Is there any way for me to get around these without wiping the computer and starting from scratch?

    Hello,
    Sadly without the system disk you can't do a lot. I would suggest you enable root user, log in as root and reset your administrators password, however you can't without knowing the administrator password first.
    The only solution would be is to obtain the correct system disk or buy a retail copy of Mac OS X. But note, it depends on what version of the iBook you own depends, on what version of Mac OS X you will require.
    You can still obtain the system disk or retail disks from online vendors, but they come at a cost.
    System disk are grey in color, while retail disk have a big 'X' on it.
    Best of luck

  • Is it possible to import the failure cases from another test plan in MTM ?

    Hi,
    Is it possible to import the failure cases from another test plan? For example, I have created a new test plan with ID 1002. Now I want to import the failure cases from test plan with ID 1001.  Is there anyway to do this?
    Thanks,
    Leslu

    Hi Leslu,
    As far as I know, there isn’t that feature in MTM, but we could achieve that by add test cases to the test suite.
    As we know, the test case is associated to the test suite, remove the test case from the test suite won’t delete the test case, it just remove the relationship.
    So, we could base on the test cases’ id to add the test cases to a test suite of another test plan.
    The condition is:
    Work Item Type In Group Test Case Category
    ID In id1,id2 (e.g. 1,2,)
    Regards
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Using data from another View

    Is it possible to create a new Grid in the same analysis where calculated/Grand Totals columns/rows may be used?
    I understand there is a feature use results from another analysis but wonder if it can be used in the same. Thanks.
    Adi

    Hi,
    Say you have a report for retrieving Sales by Products for a company and showing up grand total of sales for all products too in the same report. So, how about a case where you would like to see each product's contribution to the whole sales numbers? For this, a new column could be something like
    Measures.Sales*1.0/SUM(Measures.Sales)
    Here Measures.Sales is the sales for each product and SUM(Measures.Sales) is nothing but the total sales ie grand total.
    Hope this helps.
    Thank you,
    Dhar

  • How do i remove a line from my family plan?

    I need to remove a line from my family plan, how do i do it on the computer?

    You can't cancel service on-line; you'll need to either call Customer Service or visit your local Corporate Verizon store.

  • Does Facetime Use Data From You Data Plan?

    Does Facetime Use Data From You Data Plan?
    If so, what would be a good plan to use :200MB, 2 GB, or 2GB + Tethering?
    Or Does it use up minutes?

    Facetime uses wi-fi.
    "People have been dreaming about video calling for decades. iPhone 4 makes it a reality. With just a tap, you can wave hello to your kids, share a smile from across the globe, or watch your best friend laugh at your stories — iPhone 4 to iPhone 4 or to the new iPod touch over Wi-Fi."
    http://www.apple.com/iphone/features/

  • HT5569 When my daughter uses her i-phone on our wirless network at home does it use data from our data plan when she plays games or aps from her phone?

    When my daughter uses her I-phn on our home wirless network does it still use data from our data plan? Thanks.

    No. As long as she's connected to WiFi, no cellular data is being used.

  • If I use a family member's upgrade in the family plan, will they lose their unlimited data?

    Hi there. So since my birthday is next week, and I'm on a family plan with my parents and 2 brothers, they're letting me use someone's upgrade to get the iPhone 5 since my upgrade isn't due until November. The upgrade that's available now is my older brother's. He is so paranoid that if I use his upgrade, he'll lose his unlimited data. Is this true? I know that I'll lose mine, which is fine, but he does a lot of stuff with his iPhone and doesn't want to lose it yet. So if I use his upgrade, will we both lose the unlimited data or just me?

    scarletknights928 wrote:
    Hi there. So since my birthday is next week, and I'm on a family plan with my parents and 2 brothers, they're letting me use someone's upgrade to get the iPhone 5 since my upgrade isn't due until November. The upgrade that's available now is my older brother's. He is so paranoid that if I use his upgrade, he'll lose his unlimited data. Is this true? I know that I'll lose mine, which is fine, but he does a lot of stuff with his iPhone and doesn't want to lose it yet. So if I use his upgrade, will we both lose the unlimited data or just me?
    Actually the way I understand it, your brother will lose his unlimited data but you will retain yours. 
    Because the upgrade is coming from his line, that line of service must select a tiered data plan. 
    Your line is, in effect not changing (you will just be activating a different phone) so the data plan is not affected.
    Hope this clears it up for you.
    Good luck & Happy Birthday

Maybe you are looking for

  • I am using the MODBUS library and can't receive data, however I can send it just fine?

    Hi, I am using the Modbus Library to communicate with a VFD to control a fan. I am using the master write and read vi. I can write data to the VFD and get the fan to do what I want. The VFD is supposed to send a confirmation packet after I tell it to

  • AMD GPU fan runs constantly even after disabling DGPU

    I have a HP-Pavilion dv6 6121TX, with AMD 6770m gpu. The fan of the gpu runs constantly even after disabling it using the following command echo OFF > /sys/kernel/debug/vgaswitcheroo/switch the output for "cat /sys/kernel/debug/vgaswitcheroo/switch"

  • Displaying Where Dialog Box in Forms 10g at runtime

    hi all, In Forms 6i, I was able to display the Where Dialog box to define complex search conditions by entering <b>:variable_name</b> in a field. How can I do the same in Oracle 10g Forms at runtime? thanks in advance.

  • Configure a project with several toolkits ?

    Hello everybody, Here are my problem and my question. In my case, I use a RCP application so I configured my project with a RCP toolkit. But during my automated tests with Jubula, there are some elements whose aren't recognized by Jubula. In fact, th

  • OIm 11g uploadJars issue

    Hi All, I am getting error, when i try to upload a jar file in oim 11.1.1.5.0. Have set WL_HOME="MWHOME/wlserver_10.3 run ./UploadJars.sh [Enter Xellerate admin username :]xelsysadm [Enter the admin password :]passwd of xelsysadm [Enter serverURL :[