Using usb as serial connecting to cisco router not working
Tried using ZOC and securecrt and both shows only /dev/tty-Bluetooth.....
any ideas how can I use USB as serial connection to router?
Hi and welcome to the forums!
GREAT FIRST POST!! Very clear and specific. You don't know how rare that is
Is the laptop in a docking bay?
Content "encryption" meaning Content protection is turned off, right?
Are you able to backup and sync with the Desktop software?
Do you have the correct folders on the card?
Blackberry, music, ringtones, pictures, videos, voice notes?
(blackberry has to be first).
Last one, how did you format the card?
Thanks
Update device drivers manually:
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB13336&sliceId=SAL_Pub...
Message Edited by Bifocals on 11-19-2008 08:36 PM
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.
Similar Messages
-
PC Suite - no USB and Serial Connection Type avail...
I have been trying to solve this problem for days now. I have Windows XP and Nokia 5310. After I installed Nokia PC Suite, there is no USB or Serial connection type in the Connection Manager; it only has Blue Tooth and Infrared conection available. I have install and uninstalled PC suite and used PC Suite Cleaner to clean the installation. I also went into the add and remove program in the control panel and click on "change" to fix the Nokia Connection Manager and Nokia Connectivity Cable Driver. It still didn't work. The thing is that the first time when installed PC Suite on my laptop, it did have USB connection option. Later after uninstalled PC Suite and reinstalled it, it start to have this problem. I am extremly frustrated. Can anyone help please?
Thanks for your reply. I have solved the problem by following your instruction below:
Go to Start --> Settings --> Control Panel --> Software, there you need to uninstall all Nokia software (Nokia PC Suite, Nokia Cable driver, PC Connectivity Solution ...)
Download and run Nokia PC Suite Cleaner
Reboot your computer
Download and install PC Suite here.
Connect your phone via USB cable (if possible use a different USB jack) and follow the instructions on the screen.
Maybe when I uninstalled Chinese version of PC suite, the order in which it was uninstalled was not the one you suggested above. So，I followed your instruction and uninstall order to uninstall PC Suite again. I also uninstalled all the antivirus, spyware, and firewall before I reinstall the PC Suite. It worked; then, I reinstalled all the other security software again after I had reinstalled the PC Suite. Although it worked, I still didn't know what exactly cause the problem the first place, PC Suite version, Security protection software, or the order which it was uninstalled? All it matters is it's working. -
I can't access my USB network drive connected to my router.
I have a G5 that I was running Tiger, and could easily access a usb network drive connected to my router. As soon as I upgraded to Leopard, I sporadically get access, but usually not.
I just purchased an iMac with Snow Leopard and then upgraded to Lion, but I have never had access to this drive.
I can't get access with either Mac now, but I have no problem accessing the drive from a PC on the same home network, so I know the drive is connected properly, and is working properly.
Any thoughts how to access this drive from my Macs?Let's say that the name of your drive is Hard Drive
Check using AirPort Utility to get the IP address of your AirPort Extreme, for example you see that it is 10.0.1.1
You'll need to know the device name for the AirPort Extreme. This is not the wireless password, it's the device password.
On the PC, open My Computer
Click on Tools and select Map Network Drive.
Select the drive you want, "Z" for example
On the next line for Folder, type in
\\10.0.1.1\Hard Drive
Click Finish
Type in your user name
Type in the device password for the AirPort Extreme -
After updating OS 1.3 to 2.0 usb connection to PC is not working. I am using firefox os device Flame. I cannot share files with my PC. Please help me to fix this problem.
''Ralph Daub [[#answer-694088|said]]''
<blockquote>
Hi Raiyad Raad,
I'm sorry to hear that you're having issues when connecting your Firefox OS device to the PC, after updating it from v1.3 to v2.0.
Please ensure that USB Storage and Media Storage are activated.
If you are still having issues after activating USB storage and restarting your device, please write back to us with the following information:
* What is the model of your phone?
* What is the OS version and Build ID found in the Device Information page? Please visit [https://support.mozilla.org/en-US/kb/how-do-i-find-what-version-firefox-os-i-have this link] if you need help finding the Build ID of your phone.
* Please describe the steps you took to update your device.
* Please provide the exact steps to reproduce the issue you are encountering.
* How often do you encounter this issue?
Please be sure to include as much detail as possible, including any websites that may exhibit this issue, and any error messages that you may be receiving, exactly as they appear. This will ensure that we have all the necessary information to investigate this behavior.
- Ralph
</blockquote>
I've activated the USB storage and media on the phone. But still it's not working. I'm using T2mobile Flame and my OS version is 2.0. Build ID: 20141016183911
I've written a blog about how I updated it here: http://raiyadraad.blogspot.com/2015/02/how-to-update-firefox-os-13-to-20-with.html
I'm having this problem after updating to firefox OS 2.0 -
I am trying to "personalize" my cs2 software online download with the serial number from my original boxed cd set and it didn't work. I tried using the download serial number and that doesn't work either. Need help!
I understand that you have also used the download link & serial number from Adobe - CS2 Downloads, if still the CS2 is not working, then please refer to the system requirement for e.g System requirements | Photoshop
The issue can be that the present operating system might not be compatible with the CS2.
Regards
Rajshree -
I need to set up date and time on my apple tv.... Not doing it automatically ... I am connected to a router that works on a wireless sim card ...
OK.
Go into Settings on the Apple TV and then General-> Time Zone.
Turn OFF automatically and put your location in manually under Time Zone. -
My USB port (closest to the screen) is not working? And what is an IR Receiver in my USB port?
Hi everyone,
I recently found out that my USB port, closest to my screen, is not working. Before I called Apple Care for help, I performed a PRAM and a SMC RESET, which unfortunately did not work. I called Apple Care and they help me troubleshoot simple resets such as, shutdowns and restarts. The representative I spoke with conluded that the physical hardware has an issue and must be brought to the Apple Store for a diagnosis. I called the Apple Store to at least budget the fee for getting a USB port fixed and it's about $300.00. I never dropped my macbook or had any sort tactile encounterment with hard surfaces by dropping or hitting. I don't understand how my macbook pro would be physically damaged. I then thought maybe my software was out of date (right now I am running 10.9 Mavericks) or I forgot to do the minor software updates, but I was at a lost again because my macbook is up-to-date. I searched for further help and found a way to monitor what's plugged into my usb ports. (I read in the apple forums that a girl had nothing in her usb ports, but upon looking at the System Information> Hardware> USB, that the macbook recognizes that there are drives in the ports) I looked at my ports; one is being used by wirless mouse (the port that works) and the other (the port that doesnt work) is being used by an "IR RECEIVER". Now, is the IR Receiver actually using that port and that's why my macbook cannot recognize other devices inserted into that port? Or is the IR RECEIVER suppose to be in that port and that the hardware for that port is simply damaged (which would mean I need $300.00 to get that fixed)? I know this is a lot, but someone help me?
(PORT THAT WORKS)
USB Hi-Speed Bus:
Host Controller Location: Built-in USB
Host Controller Driver: AppleUSBEHCI
PCI Device ID: 0x1c2d
PCI Revision ID: 0x0005
PCI Vendor ID: 0x8086
Bus Number: 0xfa
FaceTime HD Camera (Built-in):
Product ID: 0x8509
Vendor ID: 0x05ac (Apple Inc.)
Version: 5.16
Serial Number: DJHBAJ06VRDH7FL0
Speed: Up to 480 Mb/sec
Manufacturer: Apple Inc.
Location ID: 0xfa200000 / 3
Current Available (mA): 500
Current Required (mA): 500
Hub:
Product ID: 0x2513
Vendor ID: 0x0424 (SMSC)
Version: b.b3
Speed: Up to 480 Mb/sec
Location ID: 0xfa100000 / 2
Current Available (mA): 500
Current Required (mA): 2
Microsoft® Nano Transceiver v2.0:
Product ID: 0x0745
Vendor ID: 0x045e (Microsoft Corporation)
Version: 6.34
Speed: Up to 12 Mb/sec
Manufacturer: Microsoft
Location ID: 0xfa130000 / 6
Current Available (mA): 500
Current Required (mA): 100
Apple Internal Keyboard / Trackpad:
Product ID: 0x0252
Vendor ID: 0x05ac (Apple Inc.)
Version: 1.18
Speed: Up to 12 Mb/sec
Manufacturer: Apple Inc.
Location ID: 0xfa120000 / 5
Current Available (mA): 500
Current Required (mA): 40
BRCM2070 Hub:
Product ID: 0x4500
Vendor ID: 0x0a5c (Broadcom Corp.)
Version: 1.00
Speed: Up to 12 Mb/sec
Manufacturer: Apple Inc.
Location ID: 0xfa110000 / 4
Current Available (mA): 500
Current Required (mA): 94
Bluetooth USB Host Controller:
Product ID: 0x821a
Vendor ID: 0x05ac (Apple Inc.)
Version: 0.42
Speed: Up to 12 Mb/sec
Manufacturer: Apple Inc.
Location ID: 0xfa113000 / 8
Current Available (mA): 500
Current Required (mA): 0
(PORT THAT DOESN'T WORK)
USB Hi-Speed Bus:
Host Controller Location: Built-in USB
Host Controller Driver: AppleUSBEHCI
PCI Device ID: 0x1c26
PCI Revision ID: 0x0005
PCI Vendor ID: 0x8086
Bus Number: 0xfd
Hub:
Product ID: 0x2513
Vendor ID: 0x0424 (SMSC)
Version: b.b3
Speed: Up to 480 Mb/sec
Location ID: 0xfd100000 / 2
Current Available (mA): 500
Current Required (mA): 2
IR Receiver:
Product ID: 0x8242
Vendor ID: 0x05ac (Apple Inc.)
Version: 0.16
Speed: Up to 1.5 Mb/sec
Manufacturer: Apple Computer, Inc.
Location ID: 0xfd110000 / 3
Current Available (mA): 500
Current Required (mA): 100I can help with the "IR Receiver" part of your question. That's the piece of hardware inside older MacBook Pros (MBPs) that lets them work with the Apple Remote. "IR" is the standard abbreviation for "infrared," the portion of the electromagnetic spectrum used by remotes for many common devices (stereos, cable boxes, Apple TVs, etc.). The remote sends a coded stream of IR pulses; a corresponding receiver in the target device "sees" the infrared light and decodes it. The MBP's internal IR Receiver sends the received signals to the processor via USB through an internal hub.
The most recent MacBook Pros have dropped the IR receiver and no longer work with the Apple Remote. -
Intermittently iphone 6 and 6 plus is wifi connected but internet does not work.
Hi,
I have an issue where intermittently iphone 6 and 6 plus is wifi connected but internet does not work. iMessage works though. Toggling the wifi setting clears
the issue temporarily but it occurs again. Running iOS 8.3 now. This was the case on iOS 8.1 and 8.2 as well.
I have tried the typical troubleshooting steps (reboot/reset network settings/disabling location services for wifi/upgrade/etc)
My router is an EA9200 router with 2.4 Ghz and 5 Ghz. It is configured with all bands with the same name.
All other devices in my house works perfectly fine and has no disconnects (ipad/macbook air/tv's/receivers)
My thought is that iphone 6 cannot handle well the moving around between bands.
Any thoughts or suggestions would be greatly appreciated.
Thanks,
DavidHave you tried to reboot your router by turning off the power (you may have to unplug it from the power source), then waiting about 30 seconds, then turning it back on? This seems to solve a lot of problems.
-
hi, i need some help to activate lightroom 5.7 i bought in november 2014, the serial number i've is not working, thanks
Hi, i'm very glad for your support, i'm installing through direct
dowmload in november 2014, we still use the classic program, is not the
cloud program, the version is 5.7.1.
Thanks.
Tai Vinh.
Le 27/04/2015 18:56, Atul_saini a écrit :
>
hi, i need some help to activate lightroom 5.7 i bought in
november 2014, the serial number i've is not working, thanks
created by Atul_saini <https://forums.adobe.com/people/Atul_saini> in
/Downloading, Installing, Setting Up/ - View the full discussion
<https://forums.adobe.com/message/7485938#7485938> -
this is bullshite again, i just updated the phone my partner gave me and now is locked and he doesn't remember ever using icloud and all my icloud accounts are not working, *** what's this now Apple ? good idea to secure us but seriously many will have t
If your device is disabled...
Connect to your computer in recovery mode per the instructions in http://support.apple.com/kb/HT1212
You may need to do this more than once. -
3 ?'s:
1 Message today warning lack of memory when using Word (files in Documents) something about "idisc not working"
2. Message week ago "Files not being backed up to Time Capsule";
3. When using Mac Mail I'm prompted for password but none work
Thanks - JThanks Allan for your quick response to my amateur questions.
Allan: I'm running version Mac OS X Version 10.6.8 PS Processor is 2.4 GHz Intel core 15
Memory 4 gb 1067 MHz DDr3 TN And @ 1983-2011 Apple Inc.
I just "Updated Software" as prompted.
Thanks for helping me! - John Garrett
PS.
Hardware Overview:
Model Name: MacBook Pro
Model Identifier: MacBookPro6,2
Processor Name: Intel Core i5
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per core): 256 KB
L3 Cache: 3 MB
Memory: 4 GB
Processor Interconnect Speed: 4.8 GT/s
Boot ROM Version: MBP61.0057.B0C
SMC Version (system): 1.58f17
Serial Number (system): W8*****AGU
Hardware UUID: *****
Sudden Motion Sensor:
State: Enabled
<Edited By Host> -
my iphon 4s got problem when i was updating it and screen become black and there is a usb & itone icon on it it dose not work any more ..any feedback about this guys?
Connect it to iTunes and restore it.
-
i am using iphone 2G, i have updated IOS 3.1.3, but i am not able to use whatsapp. the newer version of whatsapp is not working in my phone. please give me the solution.
As newer iPhones and iOS versions are made, apps start to drop support for the older versions of the iOS. It looks like you have fallen victim to this. I commend you for sticking with the original iPhone until now, but it looks like it's time for an upgrade if you want to use apps that have dropped support.
Also the new iPhone provides hundreds of new features and spec upgrades from the original. Check it out! http://www.apple.com/iphone/ -
hello sir i purchase second hand iphone4s now my iphone ask for activation with id and password i contact with previous owner and use that id and password but that also not work what i do ola help me i try all other method restore ' upgrade etc but none work plz say what i do if u find some solution tham msg me on [email protected]
First, we're not Apple here (Apple does not participate in this forum). We're only users like you.
The previous owner has not given you the correct ID and password for you to use.
If the iphone has iOS version 7, then read through the following...
http://support.apple.com/kb/HT5818 -
hello sir i purchase second hand iphone4s now my iphone ask for activation with id and password i contact with previous owner and use that id and password but that also not work what i do ola help me i try all other method restore ' upgrade etc but none work plz say what i do if u find some solution tham msg me on
iPhone 4Soenkz33 wrote:
this does not help at all for the second owner, after making the first owner id with careless, sorry for my english ...
Careless? Possible, but unlikely. Most likely the phone was stolen from the first owner. It would be a VERY careless iPhone owner who did not erase their personal information from a phone before selling it, and to do that it is necessary to disable Activation Lock. In most places in the world knowingly using stolen property is a crime, so the fact that the phone doesn't work may be the least of one's risks.
Maybe you are looking for
-
Doubt: addHeaderLine File Content Conversion Recever File adapter.
Hi, Below XML Target Structure ( Recever File Adapter- FCC) <?xml version="1.0" encoding="UTF-8"?> <ns1:MT_ChangeOfAddress xmlns:ns1="urn:passhe.com/ChangeOfAddressISA28"> <BUSINESS_PARTNER> <item> <CAMPUSCODE>65<
-
HT1338 Wanted to purchase and download OS X Mountain Lion.
I wanted to purchase and download OS X Mountain Lion but could not. Message told me that I did not have enough memory to download. I have 1GB of ram but they are saying that I Mountain Lion needs 2 GB. Are they talking desk top memory or what? I
-
Hi, How to create a Prev & Next artcle link in the detail page? is this possible to be made by DW? if not, any ideas how to build such a thing easily? I'm not a coder, & My pages are generated dynamicly. Thanks in advance. Dev_Guy
-
CS3 - preview buttons not appearing in "bar" where they used to
Hello! I am using OS 10.5.8 and Dreamweaver CS3 Version 9 Build 3481. In earlier versions of Dreamweaver, there used to be preview buttons/icons, as well as upload buttons/icons, in the "bar" at the top of the window of the page I was creating. Inste
-
Hi I want to put my data into database from text files and text files are not in proper format. How can i do this? I have heard about ETL tools . Can anybody tell me which is the best tool for ETL and can be free downloadable? and how they are used?