Using usb modem in laptop:  best settings for one location

Using VZAccess manager what are the best Options / Preference settings for a one location laptop ?
Thank you
fdleyda

fdleyda wrote:
Using VZAccess manager what are the best Options / Preference settings for a one location laptop ?
Thank you
fdleyda
Hi fdleyda,
Your USB device is designed to work best with VZAccess Manager default settings upon software installation, just make sure to have the latest software version available for your operating system, you can check for software updates at the above link. 
If you encounter any connection issues in the future please contact our tech support department at 1-800-922-0204 and we'll be happy to further assist you. Please have your computer and USB device available for troubleshooting when you call us.

Similar Messages

  • Best settings for film based PAL to MPEG2?

    There's a fair amount of useful information online regarding the best settings for film based NTSC footage export etc but I'm unable to find anything regarding the best Compressor settings for the export of MPEG2 from PAL video from a 25 frames per second film sourced master.
    Can anybody help?

    Okay, so after reading heaps of stuff on interlacing and progressive, my head is hurting. Since my 1080i50 Pal footage captures into Final cut interlaced and setting field dominance to NONE doesn't do much, I realise I need to de-interlace in an another application. Ken Stone has a great example of what to do in compressor though I dont have the current version (3) and am not sure how to reinterpret this for Compressor 2. I had a go without much luck. I am in the process of trying to use MPEG Streamclip to deinterlace and trying getting the right settings. Will see how that goes. I also have tried using JES deinterlacer but also wasnt sure about settings etc with this application either.
    Which is the best to use and what settings should I set. I wish to use my footage for watching on our macs primarily and also from our mac server which is hooked up to our hdtv. I can then convert to other formats for iphones and web etc. But my main problem is this interlacing issue. I have a nice new HDV camera but it certainly isnt looking too much better atm than my old dv footage.
    PLEASE help!

  • What are the best settings for video  compression if my end result is for use as  progressive .flv

    What are the best settings for video compression if my end result is for use as  progressive .flv.?
    Thanks,
    KIM

    Use the Final Cut Studio forum
    http://discussions.apple.com/forum.jspa?forumID=939

  • Best Settings for Audigy 2 ZS Recording Out to S-VHS or DVD Recor

    I?m recording some very machine intensi've video & sound to outboard devices. I'm using these outboard devices so that the recording process itself does not impact the demonstration performance.
    Concerning the sound out, I?m using the line & 2 out of the card, and running it through a pro level audio board (Mackie) for any adjustments & monitoring before taking the line out of the board into the recording device. When returning the sound for monitoring, I?m also running from the external device directly to the board and directly from there to either headphones or control room monitors. Thus, I?m using the Audigy for initial sound generation. So far, I've not really made any ajustments at the board other than level or balance. I like to keep things pretty flat in recording.
    I?ve looked around for recommendations as to the best settings for the Audigy card from its internal software for this situation, but find no ready reference. My concern is that I have the ?hottest? signal from this device, while being very concerned with audio quality. I?m looking for both ?punch? and ?clarity? of signal.
    Is there a document or source that would give me this direction? While I can move from this SB card to other more studio based cards, I?d like to keep the demo product in line with what the actual target audience would have in their machines, and be able to replicate at their workstation.
    For example, does the card function best at 00% (0db) output, or 50% (-5db) output?
    Or some setting in between...most likely...
    Or, is there some other setting I?m not aware of?
    I have what I believe are the latest card drivers and software suite, XP Pro, with every possible OS and other machine hardware update available.
    Thanks,
    Rich

    I?m recording some very machine intensi've video & sound to outboard devices. I'm using these outboard devices so that the recording process itself does not impact the demonstration performance.
    Concerning the sound out, I?m using the line & 2 out of the card, and running it through a pro level audio board (Mackie) for any adjustments & monitoring before taking the line out of the board into the recording device. When returning the sound for monitoring, I?m also running from the external device directly to the board and directly from there to either headphones or control room monitors. Thus, I?m using the Audigy for initial sound generation. So far, I've not really made any ajustments at the board other than level or balance. I like to keep things pretty flat in recording.
    I?ve looked around for recommendations as to the best settings for the Audigy card from its internal software for this situation, but find no ready reference. My concern is that I have the ?hottest? signal from this device, while being very concerned with audio quality. I?m looking for both ?punch? and ?clarity? of signal.
    Is there a document or source that would give me this direction? While I can move from this SB card to other more studio based cards, I?d like to keep the demo product in line with what the actual target audience would have in their machines, and be able to replicate at their workstation.
    For example, does the card function best at 00% (0db) output, or 50% (-5db) output?
    Or some setting in between...most likely...
    Or, is there some other setting I?m not aware of?
    I have what I believe are the latest card drivers and software suite, XP Pro, with every possible OS and other machine hardware update available.
    Thanks,
    Rich

  • Best settings for importing to iPod classic

    Have a lot of music on my ipod that I have imported at low quality settings. Am going to take some time re-doing this so would like to know the best settings for the best quality sound. Have plenty of room and would prefer a richer sound rather than more quantity.
    Many thanks.
    (I assume I would put the old track in the recycle bin and then import the new track.

    You might find this article useful: iTunes Encoding Strategies

  • What are the best settings for ripping cd's in the AAC format?

    I have researched and found out that the AAC format rules over the MP3 format as fas as sound quality goes with lossy formats. Example: AAC at 128 is better than MP3 at 160 as so forth. My questions are: What are the best settings for ripping cd's in the AAC format? Will I be able to burn cd mixes with the tracks I import into itunes after importing using the AAC format? Does the AAC format have VBR like the MP3 format? Is there other ripping software such as dbPoweramp and Exact Audio Copy that does a better job ripping cd's in the AAC format? Please help!

    mysteryroach wrote:
    My questions are: What are the best settings for ripping cd's in the AAC format?
    It is a matter of opinion, but I suggest 256 kb/s, CBR, and leave all other settings on automatic.
    Will I be able to burn cd mixes with the tracks I import into itunes after importing using the AAC format?
    Yes. Just put them in a playlist and burn.
    Does the AAC format have VBR like the MP3 format?
    Yes. You will see it as an option in the Import Settings.
    Is there other ripping software such as dbPoweramp and Exact Audio Copy that does a better job ripping cd's in the AAC format?
    EAC does a better job of correcting errors in damaged CDs, but for normal CDs iTunes does a fine job of ripping to AAC.

  • Need advise on best settings for FCP 7!

    I am looking for some advice on the best settings for FCP 7 when I am syncing sound using pluraleyes, exporting into quicktime as one file and then importing that new file into FCP 7 for editing. I have noticed that sometimes my Quicktime files are very large (20 gb) and sometimes they are much smaller (130 MB), but I never changed the settings.
    I am working on FCP 7 and shot using my Panasonic GH3 at 24 fps (which comes to 23.98). My frame size is 1920x1080. Compressor is H.264. Data rate: 8.6 MB/sec. Audio rate: 48.0 KHz.  I have heard that FCP 7 does not properly deal with H.264. So, I am wondering, what should my settings be?  Should I set to "Apple ProRes 422 (HQ) 1920x1080 24p 48 kHz"?  Is there anything I need to know when I export to Quicktime 7 Pro in order to not reduce the quality of the video? Should I be changing my video files first before I even start to work on them?
    I haven't edited in almost ten years so I am desperate need of some guidance!
    Final Cut Pro 7, Mac OS X (10.6.8)

    Hi Shane Ross,
    Thanks for your help.  So, I already synced all of my interviews in FCP 7 (using pluraleyes) before I changed the video to ProRess 422.  Can I just go into FCP (in the same project) and compress the video footage, import the new video files and throw it into the timeline? Or will this cause issues? I tried this as a test and it seems to be okay but I just want to check that there aren't any issues that I am not considering.
    Also, when I do compress, it seems to take forever (sometimes two hours). Is there any way to make this move along faster?
    Thanks so much!

  • Best settings for desktop i7?

    I installed After Effects CC 2014 on a computer with i74790k, Radeon 6850 and 8 GB of RAM.
    The program runs smoothly but it makes Windows 8.1 a bit unresponsive, for example opening and closing folders take longer, also browsing files, opening the start menu, etc.
    What are the best settings for decent editing and desktop stability?

    Check your memory and multiprocessing settings. The RAM reserved for other applications probably needs to be higher.
    lonnrot wrote:
    Bare minimun according to whom?
    Minimun requirements according to Adobe:
    4 GB of RAM (8 GB recommended)
    According to almost everyone who uses it. The 4GB is the bare minimum for it to run. However, you need more than 8 for it to run well. I'd consider 16 as a minimum for it to run well, but considering how cheap and easy it is to upgrade RAM, I'd put more than that in your system if possible.

  • Best Settings for Exporting DVD Footage in a Movie File

    Hello,
    I've been trying to find the best settings for exporting DVD footage into a movie file from Adobe Premiere CS6.
    I recently have been using my Magnavox DVD recorder for recording VHS tapes that I made long ago for shows and various other things, and no matter what, my footage doesn't come out as it needs to be.
    Here's an example of what I did recently with my own settings:
    http://www.youtube.com/watch?v=qFV4sT7rHGs
    I'm not expecting HD footage, I know these are tapes, but I'm playing the raw footage on my Xbox 360, and it looks better than this. I had to directly use the VOB files on the DVD for this, as trying to rip the files into an AVI or any other format with a DVD ripper didn't do anything, in fact it degraded the quality and made the audio not play in Premiere.
    So what would be some good settings for exporting a sequence with DVD footage that is from a VHS into a movie file, preferably one that wouldn't degrade the quality?
    Thanks!

    First, read Why not edit mpeg http://tangentsoft.net/video/mpeg/edit.html to get a general idea of why a VOB makes a very poor source file (which is a renamed MPG, with some other stuff like menu screens)
    Also, Read Bill Hunt on editing a VOB/MPG file http://forums.adobe.com/thread/464549
    Once you have a DVD compliant VOB on your timeline, and understanding that a standalone DVD recorder sometimes plays fast-n-loose with "compliance" per the DVD specification, about all you can do is export to standard or widescreen DV AVI and accept the fact that re-encoding an already compressed file is just not going to give great results

  • Whats the best settings for exporting a three camera youtube video on a mac book pro

    I need help figureing out Whats the best settings for exporting a three camera youtube video on a mac book pro. I use 15 or 30 fps and aI cant figurwe it out [please help

    chucknoris501
    What version of Premiere Elements are you using on Mac?
    Export your Timeline content to a .mp4 file, using export settings which have been customized under the Advanced Button/Video Tab of the export's preset.
    See Publish+Share/Computer/AVCHD and .mp4 category. The exported file is then uploaded to YouTube at the YouTube web site.
    If you post the properties of your source video and project settings, I will suggest the settings for the Timeline content export to file saved to the computer
    hard drive for upload to YouTube at the YouTube web site.
    ATR

  • Best settings for PP mov's?

    Got a few videos SD 720x486 I need to export from FCP 7 (uncompressed timeline) for use in a Powerpoint - what's best settings for PP? mov, h264, audio at 44 or 48k, what? Should we keep them at full 720 size, probably?
    Thanks
    K

    ON a Mac or a PC?
    WMV for the PC but learning how to embed is a function of learning how to use Ppoerpoint, not FCP's tools.
    H.264? Dunno, what does the manual for PP say about compatible movie filetypes?
    If you are handing these movies off to an experience PP producer, they will be able to give precise specs. If your'e doing this yourself, give yourself some extra time to work out the screwups. We have two wiseguys who insist on doing their own PP instead of letting our PP wonks do the jobs. They have never been able to figure out how to embed or link to movies and they do not understand why we tell them to have the movines in the same folder as the PP files.
    bogiesan

  • Best Settings for N Only Network.

    I am trying to create an N only network with an AirPort Extreme 802.11n router. What are the best settings to use? Here is what I currently have. Also, just bought a previous generation MacBook Pro (one right before the new glass screen ones, do I need to use the N enabler?).
    802.11n only (5 ghz)
    Channel: Automatic
    Security: WPA2
    Multicast Rate: 6 mbps
    Use wide channels is selected.
    Thank you.

    I am trying to create an N only network with an AirPort Extreme 802.11n router. What are the best settings to use?
    Are you looking for the best settings for speed or overall speed and security?
    For speed:
    o 802.11n only (5 GHz)
    o Wide-channel enabled
    o Channel: <Will depend if there are other 5 GHz Wi-Fis or interference nearby. In that case, you can choose a different channel by holding down the Option key before making the selection in the AirPort Utility.>
    o Security: None
    o Multicast Rate: This determines the minimum bandwidth that a device must achieve in order to connect to the router. To eliminate slower devices, use the highest value possible.
    For speed & security:
    The same settings as above with Security set to WPA2 Personal

  • Best Settings for my Dv6-6117dx

    I would like to know the best settings for my Laptop. This would be when I have my headphones in and off. I heard that the sound could be better and i would really appreciate if someone would tell me those settings so i would enjoy the music and other sounds that come out of this laptop

    My settings appear to be the same and I've not had any problems with iPlayer yet.
    1. Ditto
    2. Ditto
    3. Not sure what application you are referring to here, but within iPlayer when you click Options you do NOT get a "Settings" selection. Perhaps you can explain how you got to the "Web Access point" choice?
    My connectivity settings are similar but my default (and priority 1) is my home Wi-Fi/WLAN. So I would think that whenever iPlayer is downloading stuff, it is doing it through my home Wi-Fi.
    And, yes, I also always get the "Allow connection to network" question when I select a programme to watch on iPlayer. Not a problem: takes one click to say yes.

  • Best Settings for X-Fi w/ an Inspire T5900 5.1 sys

    What would be the best settings for an X-Fi Xtreme Music with an Inspire T5900 5. surround speaker system? Please inclue all information and settings on the system please... I use it for Gaming and Music also . Thankyou for your time.

    up

  • Best settings for music collection

    Best settings for keeping your Itunes music collection nice and organized?  I dont like the setting that has 2 sets of folders and 1 of them all folders are empty.

    Depending on how good your headphones are and how good your hearing is different settings will yield acceptable results. The old, years ago, MP3 setting was always 128k. This is generally a decent compromise between file size and audio quality.
    If all devices are iPods the you can get slightly better audio with same size files by using AAC format set to 160k.

Maybe you are looking for

  • When ever I try to open Firefox I get this message saying it can not open.

    "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close

  • Ipod touch and apple tv loosing connection (remote app) after a few minuts

    Hello, I've installed Apple Tv and everything seems to work properly. I've intalled also Remote app on my ipod touch. Unfortunately after a few mimutes playing songs (10 / 15) it simply stops. The only way to go on listening is to press the ipod butt

  • Can't access Power Menu at all in Windows 8.1

    Hi. I'd really like a fix for this as it's driving me crazy. I used to be able to access this menu by the usual keyboard shortcut of Win+X. For some time now (perhaps since the 8.1 upgrade), nothing pops up when I try it. I thought perhaps Windows 8.

  • Unable to update objects in console (hangs on "apply")

    Hi, I seem to be unable to update, create or delete any objects in SCCM console. For example, I can open properties of an existing application, enter some values, but when I click on "Apply", the console hangs and seems to be stuck in that state fore

  • Urls not opening

    I have a number of buttons in a tutorial that need to open specific urls when clicked. I've set them to open in new tabs as per other comments on this issue I've seen elsewhere but the links still do not open. The tutorial is saved on a web server. P