Using USB port for dial up networking with mobile phone?

I am thinking of using my mobile phone as a dial up modem when i am away from home and it uses a data cable to the USB port. is there a way to use the USB port on a Mac as your source for the internet?
Thanks
Jason

well i dont have the cable yet i just was wondering if that would work. Yes it has bluetooth but i was told you cant use the bluetooth for a modem. Dont know why the phone has the option. How would i set up that option?

Similar Messages

  • Distortion using USB port for audio output

    I did some research in the Mac Mini community regarding the problem I'm experiencing but most of the posts were several years old so I thought I would start a new thread.
    I am using one of the USB ports on my 2011 Mac Mini (2.3GHz, i5) to feed a High Resolution Technologies Streamer II USB DAC which then connects to my audio systems integrated amplifier. The issue I'm experiencing is that I am getting distortion when I first open iTunes and start a music track playing. I can hear the music but it is overlayed with this static like distortion. It seems to happen specifically when I first wake the computer from sleep and open iTunes and try to play a track. If I close and reopen iTunes and start a track playing again the distorion usually goes away and all tracks after the initial distortion play fine. I've done troubleshooting with regards to the HRT USB DAC and made sure the Streamer II is operating on its own USB Bus and I've tried a powered USB Hub to feed only the Streamer II but the distortion continues. So aside from the obvious hardware malfunction possibilities I was wondering if anyone else has experienced this problem. Thank you,

    well i dont have the cable yet i just was wondering if that would work. Yes it has bluetooth but i was told you cant use the bluetooth for a modem. Dont know why the phone has the option. How would i set up that option?

  • I have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way f

    i have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way for me to use to use my monitor. I monitor LG FLATRON E2041 brand .. PLEASE Helpp ME

    i have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way for me to use to use my monitor. I monitor LG FLATRON E2041 brand .. PLEASE Helpp ME

  • Is there a USB port for use of a flash drive?

    Is there a USB port for the use of a flash drive on the new iPad?

    The Camera Connect Kit USB port is mainly for importing Photos and Videos
    http://i1224.photobucket.com/albums/ee374/Diavonex/e8058ab4.jpg
    http://store.apple.com/us/product/MC531ZM/A/ipad-camera-connection-kit

  • I got an Ipod shuffle because I have two cars with USB port for mp3. It doesn't work. Can it ever?

    I got an Ipod shuffle because I have two cars with USB port for mp3. It doesn't work. Can it ever?

    im not shure but if you get an 3.5 mm sterio headphone jack and plug that in your car and shuffle it should work just as good

  • Can i use The iPod shuffle cable (3rd and 4th generation) comes with a 45 mm USB cable for syncing and charging. with 2nd generation ipod?

    can i use The iPod shuffle cable (3rd and 4th generation) comes with a 45 mm USB cable for syncing and charging. with 2nd generation ipod?

    thanks

  • Splitting the Time Capsule USB port for 2 devices ??

    So if i have and external HD plugged into tc usb port and I also need to plug in a netflix ready blue ray player to the same port- is there a splitter I can buy to do this or what other options do i have?
    I have an extra airport extreme I am not using-could I run an ethernet cord to it and use that usb port for my second device without and problems?
    Thx

    First, yes it is possible to attach multiple devices to the TC's USB port. You will need a USB hub though. Some users have discovered that not all hubs are compatible with the TCs USB port. So you may need to shop around if the first one doesn't work.
    However, the USB port on the TC is designed primarily to handle external HDs or printers. That is, it is designed to make them available to your local network, not to the internet. So I have doubts that the BR player will be able to have full interest access via the TCs USB port.
    See this KB article:
    http://support.apple.com/kb/HT2421
    Hope this clarifies things a bit. Cheers!

  • Apple store says ipod mini not working b/c not using usb port 2.0 - true?

    My ipod mini (a year old) is frozen/can't be charged. Apple store guy said because I've been using usb port 1.1 and that it is supposed to be used with usb port 2.0. Tells me won't send in for replacement (out of warranty anyway) unless I first update my computer with USB 2.0 card. Is this true?

    It's better to use 2.0 because it's faster.
    Try resetting it, hold the center [select] button and the menu button until the Apple logo appears. or let the battery die, and then plug it in.

  • HT3625 I have a 2012 macBook Pro 13" and the option "Use audio port for" does not appear at all in the sound menu. why is this? im running  mountain Lion 10.8.2

    I have a 2012 macBook Pro 13" and the option "Use audio port for" does not appear at all in the sound menu. why is this? im running  mountain Lion 10.8.2

    Because line-in has been removed.
    It does allow for an Apple headset with mic., but I don't know if it would work with third-party ones.
    You'll need to use a Griffin iMic or similar to use line-in via a USB port.
    The same goes for the 15" retina, the newest MBA and the new iMac (whenever it finally arrives).

  • I charge my I shuffle using USB charger for my I pad, now it won't charge but it will charge a different I shuffle

    i cannot charge I shuffle, I use USB Port from I pad , I can charge another I shuffle, but not this one any more

    Start by reading through http://support.apple.com/kb/TS2634
    Are the charger nd cable original Apple parts or third-party?  There have been a lot of problems ith third party cables and chargers since iOS 7 - checks for compatibility with Apple specs.
    Try another charger and cable to see if that makes a difference.

  • Which USB port for extra power for external Superdrive?

    I just bought an external USB slimline optical drive that doesn't use AC power, instead it comes with a USB Y-connector so that it can use two USB ports for power.  I can't really spare the extra port.  I read that the Mac mini 2011 is compatible with the Apple USB Superdrive.  It does this by supplying additional power over USB, like the MacBook Air.  I've tried my drive with just a single port and it powers on and can do some stuff, but suddenly it'll crap out and the OS will tell me the disk was removed without being ejected.  I've determined it's a power issue.  Does anyone know which port in particular the extra power is delivered through?  I'd test myself, but I'm afraid I may be damaging the optical drive when it craps out.
    Thanks

    I'd get a good AC high powered USB Hub...
    http://eshop.macsales.com/item/NewerTech/USB2HB7PRO/
    http://eshop.macsales.com/item/MacAlly/TRIHUB4/
    USB thing reproduce like Rabbits!

  • Any experience using Airport Extreme for dial-up?

    Hi,
    I just purchased a MacBook, which I love already, but I'm a bit disappointed that they decided to drop the internal modem. Regardless, I'm trying to figure out the best way for me to connect to the internet now (I use dial-up). The $50 external modem seems okay, but the reviews/comments have been lukewarm at best.
    Does anyone here use the Airport for dial-up connections? I've never tried doing the wireless thing with my dial-up ISP (which is ISPWest, btw), so I'm curious to see if it's worth doing, given that the connection is already slow to begin with.
    Thanks!

    Before I got DSL that was how I used my AEBS.
    The internet speed (56Kbps) was just as fast as if I was directly connected to the phone line.
    I did in fact share the phone connection wirelessly with three computers which was useful.
    iFelix

  • Not enough USB Ports for charging ipod ?

    not enough USB Ports for charging ipod ?

    If all your ports are in use, try buying a USB hub, they are inexpensive and will give you several more ports.  Google for them.

  • Can time capsule be connected wirelessly and still use ethernet ports for other devices?

    can time capsule be connected wirelessly and still use ethernet ports for other devices? we have it connected wirelessly but devices connected to the ethernet ports are not working.

    Not as an additional router.. the TC will be plugged into the main router via ethernet (or ethernet equivalent)..
    Then the TC is setup in bridge mode. It will simply act as a Switch and HDD.
    The wireless can be setup in a number of ways.
    From your convenience point of view use it in roaming network mode..
    you simply give the TC the same Wireless Name as the existing routers SSID.
    Same security setting and password. WPA2 Personal = WPA2 AES which is the best.
    But they both use different wireless channels.. normally if you leave the TC on auto it will work fine, but I prefer to control the network.. so set the main router to say 1 and the TC to 11.
    You can also use a completely different wireless name etc.. that is up to you. It is still a single flat network and the only thing that is important is only having one router.

  • I purchased a new Windows 8 PC. I have used and continue to use Outlook 2010 for my calendar. With my old Windows 7 PC and Outlook 2010, my calendar sinked properly with my Iphone 5. Now with the new Windows 8 PC, it does not. Help!

    I purchased a new Windows 8 PC and I use Outlook 2010 for my calendar. With my old Windows 7 PC and Outlook 2010, my calendar would sync with my Iphone 5, but with the new Windows 8 PC and Outlook 2010, it does not, and I can't figure out how to snyc them. The emails from Outlook 2010 sync, but the calendar does not. Help! Thanks. 

    Easy solution for restoring lost calendar informaiton, thank goodness.  On your iPhone, go to settings, then to iCloud.  If your Calendar selection is turned off,  turn it on.  Your info should restore.  If your Calendar selection is turned on, then turn it off.  Choose to save calendars when asked.  After it shuts the Calendar off, turn it back on.  Your info should be restored.
    Thank you to Apple support for walking me through this.  Shame on you Apple for not just telling people about this easy fix rather than making us go through all of this pain and worry.
    - JT

Maybe you are looking for

  • SAP R/3 Fields to BW InfoObjects Mapping Documentation

    Hello everyone, As a newbie, one of many challenges that I face is to map SAP R/3 fields to its corresponding InfoObjects in BW. I've learned that we can run transaction <b>SE11</b> and view table <b>RSOSFIELDMAP</b>, in order to know the mapping bet

  • Using a VARCHAR2 in a SELECT command

    I'm trying to query for a given path in a hierarchy of products. However, I want to be able to have it return multiple values. So, I created a string in my function below that returns identifiers like "(34, 43, 54)" to be used in a SELECT IN. The fun

  • Yosemite, Filevault, I accidently turned it on?? Help..

    I didnt know what filevault is and I just turned it on without knowing what it is doing. It says that it is encrypting something and its going to take 1 day???? its using a lot of power and my hdd is making anoyying crackling noises. Its not loud.. I

  • How do I add hyperlinks to my video?

    I'm creating a video for a client in which they want hyperlinks to their website and email at the conclusion of the video playback. How do I add these to the final screen?

  • Replace REUSE_ALV function module with use of OO ALV(obect oriented)

    HI, I m using function module 'REUSE_ALV_GRID_DISPLAY' to disply the report but now client want to use object oriented ALV instead of REUSE_ALV function pls help me.its very urgent thanks! Vipin pls find the code below. FORM f0001_get-select_data .