Using USB preamp with Garageband

Garageband will not recognize my microphone for some reason. I am using an M-Audio USB Preamp, with a Behringer condensor microphone. I have changed the input/output settings in both the mac settings and the garageband settings to "M-Audio Mobilepre USB." Garageband must recognize the preamp because it has it as an option in the input and output. The computer hears the microphone, because the input level bar in system preferences responds to sound. Garageband works fine with the built in mic, and the microphone volume is maxed, so I know that isn't it. Any help?

How did you figure it out?
I've been trying to plug my Gibson into Garage Band but all i get is feedback. I seemed to have followed all the same steps as you. From researching on-line right now it looks like I might have to get a pre-amp... you know anything about that?
any help would be cool.
thanks!

Similar Messages

Using USB Microphone With GarageBand iPad?

Hi, I have the Samson G-Track USB Microphone and have been using it with GarageBand for iPad (with a powered USB hub) and I was wondering if there is a way to enable "Monitor" so that when I speak into the microphone I can hear myself in the headphones? I have no problem recording with the microphone, I just can't hear myself when I'm recording. There are a few switches on the actual microphone that could control this or it could all be controlled from iPad itself, just looking for anyone who could help with this matter. Thanks!

I'm having the same problem trying to monitor my turntable recording via a USB phono amp connected via a USB hub to the photo connection kit.
Have you had any help with this yet?

Trouble using USB keyboard with GarageBand

I have a Yamaha DGX-305 keyboard with a USB out. I want to record the real instrument using GarageBand, rather than using MIDI input. Is this possible? GarageBand isn't recognizing the keyboard when I simply plug it in. I've downloaded what looks to be the appropriate driver form the Yamaha site. It sounds like some keyboards are set up for plug-and-play. Is there a way I can get this to work where GarageBand records the real instrument via USB? Thanks.

I've downloaded what looks to be the appropriate driver form the Yamaha site.
But maybe it's not the right one. Is it this one?
When you go to GB's Audio/Midi prefs, does it detect 0 midi devices or 1?

Using usb mic with logic output stops

using usb mic with logic output stops

Aggregate devices are setup in the Audio/Midi setup of OSX Utilities, (Not in Logic). It gives you a way of having for than one audio i/o device. Once you have set up your aggregated devices in Audio/Midi, when you start Logic you will need to go into Audio preferences and choose the Aggregate device.

Can i use USB headphones with my X-Fi XtremeGamer sound ca

I was wondering if there was a way to use USB headphones with my card? Also if i use my front headphone jack i only get sound out of my left speaker... is this a problem with my card, or with my headphone jack? I'd appriciate any help! Thanks

Thanks for answering about the USB! Still wondering about the front headphone jack tho

How to use Alesis synthesizer with GarageBand

I have a Alesis QS6.1 64 voice expandable synthesizer. I have purchase a MIDI to USB converter cable and attached the synthesizer to my Power Mac G5 system that is running Mac OS X 10.5.5.
The Audio MIDI Setup program on the Macintosh indicates that it successfully identifies the MIDI device.
I want to be able to use the synthesizer to record in GarageBand. However, when I open GarageBand v2.0.2 and play the synthesizer sound comes out of the synthesizer speaker and nothing happens on the computer. There is no indication that GarageBand is responding at all to the synthesizer.
What is needed so that the synthesizer keyboard will work with GarageBand?

http://archive.digidesign.com/support/docs/Mbox2_CoreAudioGuide.pdf
http://avid.custkb.com/avid/app/selfservice/search.jsp?ssdFilterCommunity15=1409 &ssdFilterCommunity11=511&ssdFilterCommunity13=948&ssdFilterCommunity3=1450&ssdS earchOperator=0&ssdFilter_SearchKeyWord=&page=1

Anyone here use a DrumKAT with Garageband?

Maybe someone can help. My setup is DrumKAT (dk10) into iMac with MIDI-USB cable. My problem is when I close the HiHat with my Pintech pedal, all the pad sound start wavering with tremelo. It does not happen if I play through EZDrummer with Garageband closed, but I'll be needing to record in Garageband and I like the standard drum sounds in Garageband '09.
Does anyone have the answer as to why this is happening? Or if you have a DrumKAT and do not notice this, what is your setup?

Update, Here we are a month later. I upgraded from a DrumKAT dk10 to a 3.8. I did this because I discovered the dk10 didn't have a continuously variable hit hat control function. Well, one of the first things I did after getting lost in the complicated DrumKAT interface for a few hours, was controlling Garageband.
No boing boing with the 3.8.....however, now the hat pedal raises the note like a tympani pedal. I'm sure this is not an Apple problem, but a DrumKAT problem, but still, if anyone is using any KAT with any Apple computer, please respond.

Using Amplitube Metal with Garageband??

Hey everyone,
I'm very new to the mac world - fiance and I just bought one last month. We also purchased Amplitube Metal (which I suppose is some king of program that just gives you a lot of different effects) and the stealth pedal thing (sorry, I don't know much about either lol...)
He is having problems running it with garageband. He is able to open up amplitube under the effects I guess, but garageband doesn't seem to want to work with it as it keeps quitting unexpectedly - and he cannot figure out how to record in garageband WITH amplitube effects.
If anyone can help- please do. I've been googling all day but can't seem to find any helpful info.
Also, sorry, I really have no idea what I'm talking about and neither does he lol

I never used a stealth pedal or amplitube but that won't stop me
You usually start by plugging guitar into a line in on the pedal and usb to computer. Open garageband (real instrument) click on Garageband > Preferences > Audio Midi and select the input in this case the usb codec, stealth or whatever the Mac see it as also choose the output (built in, line out or stealth pedal) whatever your speakers are plugged into. Open the track info window choose the input channel usually mono 1 or mono 2 and turn monitoring on. Make sure track is record enabled.
I believe Amplitube is a AU plugin so choose it from a empty slot in the effect edit window. Double clicking the Amplitube icon should open it in a window to make adjustments.

Using Yamaha Keyboard with GarageBand

Tried my Yamaha keyboard with GarageBand for the first time. To my amazement, it worked. However:
Cant' seem to get the volume up (on the Yamaha Keyboard). Checked all the volume settings, including the iMac's System Preferences, GarageBand volume settings but it's still relatively "soft."
I'm using a USB 2.0 15-ft. cable. Could the length of the cable have anything to do with this. Would a shorter USB 2.0 cable.........say 4-ft. ...... make a difference?
Thanks in advance for your suggestions

don't think I have some of the features to control
sound you suggest. (GB's Track Fader? Master Volume
Fader? "Generator" settings. "Pencil" icon.)
You have all these things. Each track has a fader (volume control), and at the bottom right of the window is the Master Fader (volume Control). Select a track and open Track Info ("i"nfo) icon), click details, and the pencil icon to the right of the Generator PopUp menu.
preferences, it does not show that USB port as a line
in......
Because it is NOT a line in. MIDI ≠ Audio.
just internal mic and audio line in
As it should be.
I don't understand why, when going to the audio
settings........both on Mac audio preferences and
GarageBand..........it doesn't show that USB as an
audio line in.
Because MIDI ≠ Audio
Also tried with Sound Studio...........a music
recording application that came with my iMac when I
purchased it a couple of years ago. It has worked
with the Mac's audio line in and with the internal
mic.........but doesn't pick up anything from the
keyboard via USB cable in.
Because there is no Audio to pick up. MIDI ≠ Audio.
Could the length of my USB cable have anything to do
with this? I am using a 15-ft. USB 2.0 cable.
No.

Can I use USB 3 with my 2.8Ghz Quad-core

I have an early 2008, 2.8 GHz Quad-Core Intel Xeon Mac Pro, can I use USB3 Devices with it?

Yes, they are all backward-compatible.
If you wnat USB-3 speed, you would need a PCIe card.

How can I use USB camera with NI cRIO 9022, please see my strange problem.

Hi,
I would like to use a USB camera with NI cRIO 9022. I used the same USB camera with NI USB 6216 DAQ device and developed a VI(within a PROJECT and outside it). So, It is working fine with NI USB 6216 device when I use the Vision Assistant Express VI and gets detected in its Initialization Window. Please see JPEG File 3 where I get NO ERROR.
I am facing a problem when I want to use it with NI cRIO 9022. What exactly I am doing in this case is:
1) Create a NEW PROJECT
2) Add Targets and Devices(NI cRIO 9022)
3) Use the Scan Interface mode
4) Create a NEW VI under the cRIO 9022 device
5) Use a Timed Loop(Synchronized with Scan Engine) for continuous Data Acquisition and Sending from the Analog I/O modules.
6) Use the Vision Assistant available through the NI Vision Acquisition 2010 Module(I get STUCK HERE! The Express VI opens the Initialization Window, but I don't see the USB camera like in JPEG File 3)
I am facing difficulties with this HOST COMPUTER, cRIO implementation differences. On my host computer I have the software packages as shown in JPEG File 1, and on my cRIO 9022 as shown in JPEG File 2.
Can someone guide me how to overcome this and get the USB camera detected when I am using NI cRIO 9022?
NOTE: If this is a problem with software mismatches on HOST and NI cRIO 9022 device, please see JPEG Files 1 and 2 for available software and Host and cRIO 9022.
Thanks.
Amar.
Attachments:
Host Computer Image or Vision Acquisition Software Installed.JPG ‏91 KB
IMAQ and dx Modules Installed on my NI cRIO 9022 hardware(No NI Vision Acquisition 2010 SP1).JPG ‏82 KB
NI Vision Acquisition Express NO Error for NI cRIO 9022.JPG ‏48 KB

When you select My Computer, you are running the program on the PC. In this case, the camera works because it is connected to the PC. The scan engine doesn't work because it needs to run on the cRIO, not the PC.
When you create the program on the cRIO, you can use the scan engine because the program is on the cRIO. You can't use the camera because it is back on the PC, and can't be found on the cRIO.
The project is a wonderful tool, but it may be making the programming seem too simple. It may not be clear to you that by moving a program to a different location (PC or cRIO), it is running in an entirely different environment on a totally different machine, even though it is just a little further down in the project. You can't easily access the hardware on one machine while running the program on the other.
So the summary is: The camera is attached to the PC. The scan engine runs on the cRIO. Never the twain shall meet.
Bruce
Bruce Ammons
Ammons Engineering

Can I use USB 6008 with LabVIEW 6.1 RT?

Hi there,
I've been using LabVIEW 6.1 RT for my applications and so far I haven't felt the need to upgrade.
However, I decided to try the USB 6008 and I'm learning the hard way that this device will only work with NI-DAQmx and apparently not with the latest NI-DAQ 7.4.2 (legacy) In fact, I can't see the device in MAX 4.1
Is there any way I can use the USB 6008 with my 6.1 RT version of LabVIEW ? or should I send the thing back to NI ?
I will appreciate your guidance on this issue.
Thanks a lot,
at

Hi at -
Allisso is right. There is no way to use the USB-6008 with LV 6.1, because neither of its drivers (DAQmx and DAQmxBase) support that version of LV. You'll have to either upgrade to a current version of LV or work with another device. I recommend contacting your sales rep at NI for help.
David Staab, CLA
Staff Systems Engineer
National Instruments

Im using Duet2 Interface with Garageband 09 when I connect my acoustic guitar to the combi jack I get a buzzing/humming sound how can I eliminate this?

I'm using Duet 2 Audio Interface with Garageband 09, when I connect my acoustic guitar to the combi jack I get a buzzing/humming sound. How can I eliminate this?

do you have any thing plugged into wall power? Audio interface, computer, speakers, amp for the guitar? if so are they all plugged into the same power strip? if so, have you tried another outlet?
Altertively have you tried a diffrent port on the combo jack? Have you tried a diffrent guitar cable? Have you tried a diffrent guitar or audio input device like a mic? Is the device directly plugged into the combo jack, or is it being routed throughs some thing?

Using MBox 2 With GarageBand on MacBook Pro Lion 10.7.3

Hi. This is my first Apple Support post. It was recommended that I post to this forum. I've been using my good old MBox 2 with GarageBand on my old MacBook without incident. Someone stole my laptop so I had to buy a new MacBook Pro the other day. On that system, GarageBand at first didn't recognize the MBox at all. A trip to the Genius Bar led to downloading a core audio driver. This enabled GarageBand to recognize the MBox 2 as an interface, and it records without much incident when the audio input/output settings remain on the DigiDesign MBox. HOWEVER, when I change the audio setting to the build-in output, all **** breaks loose. The selected signal bar starts registering a regular, loud, red-lining metalic beeping sound, and at this point the issue remains whether or not I change the audio setting back. They've tried several audio drivers at the Apple Store and nothing is working. Avid requires you to buy support codes, which is ridiculous, so any help on this forum would be extremely appreciated. Thank you!

I have a m-audio fast track pro that I'm having a similar problem when using it with my new Macbook Air. I found changing it to 16 bit will work.
I have a Apogee iMic that works fine so my guess is we will have to wait for Avid/M-Audio to update drivers.

Using USB microphone with LE

I currently use an M-Audio FastTrack Pro and an XLR condenser microphone. But setting is all up to record vocals is time consuming for my young son. I was thinking of getting a USB mic with a desk stand for him to use for recording his vocals. Anyone out there using Logic Express 8 and a USB mic? How do I set it up? Any suggestions for a good mic under $100?
Thanks

Best solution: Teach your son how to use the "right" mic. Sorry, but I would not recommend the USB thing-mic. If it's "just for play", buy any mic. If it's for real recording, stick to pro hardware.
Fox

Using USB preamp with Garageband

Similar Messages

Maybe you are looking for