Using USB thumb drive with Parallels and Microsoft Windows XP

I installed Parallels 3.0 because I need to use a few windows applications for work. I am currently unable to find the USB thumb drive when I plug it into the USB port. It is connected and is selected, but I can't figure out how to access it. I check in "My Computer" just like I would on a PC, but the thumb drive is not listed. Any suggestions.
Macbook with Leopard
Thanks.
Jon

You're right, it should show up under My Computer. You may want to post your question over on the Parallels forums: http://forums.parallels.com as they're more geared toward the issue since Parallels is not an Apple product.

Similar Messages

A USB thumb drive with data created in Windows is not showing up on my desktop. Do I need a different driver or something?

A USB thumb drive with data created in Windows is not showing up on my desktop. Do I need a different driver or something?

OK in order to read those files you will need MS Office for Mac or install MS Windows on your Mac. You can get MS Office for Mac from anyone that sells Apple products. I would suggest the Apple Store, Best Buy, Amazon etc...For help getting the data from the memory stick I'd recommend visiting your local Apple Store or AASP and they can help you move it. It should be as simple as plugging the USB drive into your USB port and then open a Finder Window where you will see the drive on the left pane. If you don't know what Finder is or how to open a new Finder window you need the sites I've noted below!!!
Because you are new to OS X I would strongly recommend you bookmark and frequently visit the following web sites:
Switch 101
Mac 101
Find Out How Video tutorials

Can I use a USB thumb drive with iPad

Can I use a USB thumb drive with iPad2

What do you want to do with the thumb drive?
If for picture/movie files, You can use a USB flash drive & the camera connection kit.
Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import.
 Cheers, Tom

Can papers be typed on a MAC then use a thumb drive to copy to Microsoft Word and printed?on a Dell

Can papers be typed on a MAC Air then use a thumb drive to copy into Microsoft word and be printed?

Yes, if saved or exported into a format Word can read.
(87620)

Using a usb thumb drive with a mac

So, I'm a recent windows user and when using a USB thumb drive, if you erased something, it would automatically update the thumb drive and show the right amount of free space.
I've noticed with the mac, if you delete an item, it doesn't update, and you need to go into disk utility and format in order to show the appropriate amount of free space.
Is there an easier way to do this?
I searched for a few minutes on this topic, but couldn't seem to find anything. All apologies if I missed it.

Choose Empty Trash from the Finder menu, or from the menu which appears when you control-click or click and hold on the Trash icon in the Dock.
(38516)

How can I create a Lion USB Thumb Drive with the 11E2068 build?

It seems that the Lion build from the Mac App Store is not compatible with my Macbook Pro Retina 15''. It's seems I would need the the build 11E2068 for my USB thumb drive to work properly.
I don't want to go through the internet recovery and loose 8 hours.
Is there anyway for my to get that build(11E2068) on my USB thumb drive?
Thanks,

keg55's given you article that allows you to capture the installer. These are the critical portions:
Once that data has been downloaded, Lion Recovery restarts your Mac, immediately installs the OS, and then deletes the installer data. The trick is to interrupt that process—safely—so you can grab the installer data and keep it. Here are the steps to take:
IMO, Apple needs to rethink this process. Unless users with machines that had Lion preinstalled, like yourself, let Apple know this process is terrible, they'll not change their minds.
7. IMPORTANT: Monitor the download’s progress. As the progress bar gets near the end, get ready, because once the status reads About 0 seconds remaining, the progress bar will disappear, the installer will spend a minute or two cleaning up, and then your Mac will restart. As soon as the screen goes dark, unplug your external drive. If you wait too long, your Mac will boot into the Mac OS X installer on that drive, starting the installation process. Interrupting that process can leave your Mac unable to install OS X unless you restart it and—I’m not joking—zap PRAM.

USB thumb drive crashes MBP and PowerBook G4

Hi!
I have a USB thumb drive. It mounts on the Desktop (as two drives, which is not strange because it has both an internal 6 MB of memory and a 2GB SD card) and I can open them. But if I attempt to copy a file either to or from the drive, the Finder hangs forever.
This problem exists both on a shiny new MacBook Pro with 10.4.7, and a PowerBook G4 with 10.3---in either case, I must hard-reboot the machine.
DiskUtility says that the drive checks out OK.
Any thoughts? I tried reformatting the thumb drive, which worked temporarily; but when I added a file to the drive on another machine and tried to transfer it to the Mac, the thing hangs Finder again.
I don't have any problems with the drive on PCs, and I don't have the problem with other USB drives on the Mac.
Xcott

It sounds like the file system is corrupt. I am assuming it's FAT32. I would reformat the drive partitions on a Windows machine and see if that helps.
Also, because it's a dual, you might want to make certain that you do not plug it into a hub or a keyboard but directly into your Mac's USB host port. It may need additional power...
Good Luck!

Are there any rumors that the new iPad will be able to connect to usb thumb drive for iWork or microsoft word?

Please help, I would like to know if it would be better to buy the new ipad instead of an ipad2

It will almost certainly not connect directly to USB thumb drives. There's still no USB port, and except for photos on specifically-arranged drives, there have been no indications that such support will be provided via the Camera Connection Kit.
Regards.

How can i use external hard drive with mac and pc!

I've been using a Lacie external hard drive with my mac to keep the itunes library and other things since day one. Since i have a dvd with files for windows and an old pc without a dvd drive, i decided to copy and paste the content of the dvd to the external hard drive. The only problem now is that when i plug the external hard drive to pc, it won't open. I know it has to be formatted in a different way, but i need to find out the best solution!
Any idea?

You can format the external drive in Fat32 (which I don't recommend but is the most compatible between both platforms), or NTFS (which requires some work to get your Mac to recognize), or HFS+ (which requires special software on your PC so your PC can use it).
If you use this drive mostly with your Mac, get MacDrive for your PC:
http://www.mediafour.com/products/macdrive
If you use this drive mostly with your PC, here's some software for you Mac. I haven't tried this myself, but the professional reviews have been good:
http://www.paragon-software.com/home/ntfs-mac/

I need to use my iMac to run some Windows software and was thinking of using Parallels Desktop 9 to help with this. Do you still have to partition your drive with Parallels and does this leave you open to viruses?

I need to use my iMac to run some Windows software not available for Mac and was thinking of obtaining Parrallels Desktop 9 to help with this. If I use Parrallels do you still have to partitian your drive and does this leave you open to viruses?

You do not have to partition your drive - Parallels creates a disk image which contains your Windows installation. You do have to exercise anti-virus measures in the Windows partition, although such malware cannot affect the Mac filesystem.
Matt

Not able to use usb thumb drive it keeps telling me that its been unpluged

I have 2 usb SanDisk Crusers and when I plug one in it shows up as no name when I go to copy data off of it will tell me that its be unpluged with out ejecting it drives work fine in windows computers... anyone experanceing the same thing

Never had that issue with the cruizer. Just used it this morning.
What happens when you unpug it & plug it back in? Does it re-mount?

USB Thumb Drive with Simple Finder

Hey everyone,
I'm trying to find a way that a user account restricted and using the Simple Finder feature would still be able to save their data to a USB Drive. I know that the drive shows up in the save dialog (and so does every other file on the system which doesn't seem very secure) but what I'd really like is for the drive to still show up on the desktop like it does normally.
Is there anyway to do this under Simple Finder or do I need to seek out other options?
Thanks!
David

Simple fix, use Workgroup Manager.
<Question Closed>

How to make OSX boot disk using a USB thumb drive? The final answer?

Well guys I am getting really conflicting information about possibility to use USB thumb drive for boot up drive for OSX! Some people say yes, some say no, some - not sure.
Here is the question formulated as straight as possible:
A Mac user wants to create OSX 10.6 boot-up disk on a USB thumb drive, so it can be used to start the Mac instead of using manufacturer’s CD. Also, (thumb drive’s size permitting) the Mac user must be able to install software on it, as it is done on the internal HD.
The computer is MacBookPro , Intel based , OSX 10.6
The USB thumb drive is 16 Gb brand new .
So,
what the EXACT steps will be, to properly Mac format the thumb drive with OSX disk utility and then install on it the OSX 10.6 from the manufacturer's grey CD that comes with the Mac?
Could someone, who has practical experience and is absolutely sure about the exact steps provide the final answer, please?
Thanks in advance to old hands & pro Mac Users willing to clarify this topic !

Hi
The instructions to make a bootable USB are [here|http://macs.about.com/od/diyguidesprojects/ss/usbflash.htm]
I have made a bootable USB following the above instruction and also had enough space to install a few utilities. It works fine for me.
I usually like to check disk health of my MBpro intel via disk utilities off the USB after booting from it. Not that this is a recommended way or anything, just that I like to do it that way.

Prepare an usb thumb drive, to boot windows 7 or 8 in UEFI mode

Purpose of this post:
Prepare an usb thumb drive, to boot windows 7 in UEFI mode and install the system in pure UEFI mode.
Why am I writing this:
I had a hard time finding out how to make a custom installation of windows 7 in pure UEFI mode, and avoid using the factory restore disks. After hours of research, experiments etc I finally got the point and found a solution. And I'm happy to share my research with you. I hope this will be of help. If something is not clear, or more information is needed, I will be glad to explain things further.
History:
As most of you already know, BIOS was developed for PC in early eighties and has remained unchanged in recent years. But, since 2000, Intel started working on a new firmware interface, called Extensible Firmware Interface, abbreviated EFI. And since 2005 United EFI Forum has been handling the responsibility for development, management and promotion of UEFI specifications. Bigger companies like Intel, AMD, Microsoft and Dell have already started to bring out their products in accordance to UEFI standards which has more stable, secure and easier to use interface.
How does UEFI works (in a nutshell):
Once you power on the UEFI based PC, the Pre-EFI is executed which initializes only the CPU, memory and the chipset. This followed by Driver Execution Environment (DEX) where other hardware is initialized.
Advantages of UEFI:
    It can integrate various drivers this will not require to load during booting so saves time.
   PC can connect to network without OS.
   Also integrated drivers allow rendering GUI based control panel which out dates the old school bluish BIOS screen.
   Not all the installed hard drives are scanned as boot drive is set during the installation of OS in UFFI.
   Applications like anti-virus and diagnostic tools can be stored on virtually any non-volatile storage devices attached to a PC.
For a system to boot and install in UEFI the partition table of the HDD should be GPT (GUID Partition Table), not the old school MBR (master boot record). GPT has many advantages, can have virtually an unlimited number of partitions (windows will allow only 128) and impressively big partitions.
Since UEFI has a lot of advantages why not having a system install and boot in UEFI mode? AFAIK new Lenovo notebooks/netbooks are UEFI capable and OS’s are already installed in pure UEFI mode.
So, let’s go now to the point. Do you want to have more control over your HDD? Let say, you have a 320GB HDD and you have divided it in two partitions, one of 50GB, for your Windows 7, and the remaining for your data. If something goes wrong and you need to restore your system to factory default, with the recovery disks, it will wipe your partition scheme, set the system to default and this way your data will be lost.
You may want to make a “vanilla” installation of windows from a USB thumb drive and avoid using factory recovery disks. Now here things get complicated. A standard preparation of the USB with Microsoft’s software (Windows 7 USB/DVD Download Tool), or other tools, will give you a bios installation, not a UEFI one. So for the system to boot, you will need to change some settings in bios, and changing it from UEFI to legacy bios. The installation will prepare the HDD in MBR partition table, and you will lose all the advantages of UEFI, described above.
Now this can be avoided, by properly preparing an USB to boot and install in UEFI mode. Here are the steps:
Step by step tutorial:
1.   In a windows computer, download a legal copy (although trial) of the windows 7 os. You can do this from here: http://www.mydigitallife.info/official-windows-7-sp1-iso-from-digital-river/
Be sure to download the same version that came preinstalled in your computer. For example, if you have a Lenovo x120e, with a Windows 7 professional, 64bit, download an iso image of the Windows 7 professional 64bit.
2.   Once downloaded burn the iso to a USB thumb (at least 4GB) using Windows 7 USB/DVD Download Tool.
3.   After preparing this, create a folder on your computer, name it whatever (i.e. W7pro64bit). Go to the root of your USB
and select all the files and folders there (9 in total) copy, and paste to your folder you created, W7pro64bit.
4.   Using windows format the usb again in FAT32. Windows 7 USB/DVD Download tool, formats it in NTFS. We need a FAT32 formatted disk to achieve our goal. Formating again the USB in FAT32 will not touch the MBR of the USB thumbdrive. And after copying back the files (see step 6) the USB will still be bootable. (nice, and simple, isn't it?)
5.   Now go to the folder W7pro64bit and do the following:
a.   Browse to W7pro64bit\sources\ and open install.wim file. It’s a big file, and can be opened as an archive with 7zip (free software). Do not extract it, do not modify it, just browse the file with 7zip. Just to be sure you do not mess with that file, you can copy it somewhere else in your computer, and than procede.
b.   Browse this file (install.wim) to \1\Windows\Boot\EFI\ and locate the file bootmgfw.efi. Do not move, delete it, but just drag that file to the desktop. (if you have copied the file install.wim to another place in your computer, than you are safely do whatever you want with that file ) Close the 7zip program to release the install.wim file.
c.   Rename the file you just copied to the desktop from bootmgfw.efi to bootx64.efi.
d.   Now go back to w7pro64bit folder and browse \efi\Microsoft. Form there copy the folder boot and paste it one level up, on the folder: \efi. It will look like this: \efi\boot.
e.   Now copy the file you saved on your desktop and renamed (bootx64.efi) to \efi\boot (inside the boot folder you copied on step 5d
6.   Now go to the root of the folder W7pro64bit and select all folders and files (9 in total) copy, and paste all those files back to your USB thumb drive. (see step 4 for more info)
7.   Go to the computer that you are going to reinstall, and before restarting it, use the program ABR (activation backup and restore) to backup the license of your windows os. (use google to find ABR). Advanced Tokens Manager (ATM ) is great too. This link may be of help: Backup and restore W7 activation. After the program finishes its magic, it will create a few files inside the folder where the program itself reside. Copy these files to a new folder in your usb. Rename it to ABR so you will quickly find it later. (if you decide to use ATM, the procedure may be a little different. But you are smart enough to figure out how to use it)
8.   Backup to an external storage all your data before continuing.(reminder: are you sure you saved the license as explained in step 7, to a safe place? To a external drive, to another computer? If you are sure, than go on with step 9)
9.   Now restart your laptop, and enter your bios settings. Go to the boot settings, and set the computer to boot in UEFI only. Not both, not UEFI first, or legacy, BUT UEFI only. Save and restart.
10.   Press f12 (or the corresponding key for your machine) to choose the boot device and chose to start from the USB thumb drive with your windows 7 pro 64 bit.
11.   If everything is done correctly, your computer will boot from the USB.
12.   Follow the wizard and choose a custom install, not upgrade. At the disk partition window delete all the partition you see there until you have only one unallocated space.
13.   Select it, and click next to install windows, without making partition in this point. The installer will create a GPT partition table not a MBR since the USB booted in UEFI mode.
14.   Immediately after the first restart remove your USB thumb, and the installation will continue from the HDD. Wait until installation finishes.
15.   When you will be finally on your desktop, on the installed OS plug your USB go to the ABR folder and click on restore.exe. It will restore your license and your copy of windows will be activated.
16.   Now you can go in computer management/disk management and shrink the HDD to create your partitioning scheme. Make sure to leave enough space to your windows os. (30gb or more for extra programs you will install at your choice)
17.      Download from lenovo.com thinkvantage system update and update your system. Windows update too can install all the necessary drivers, if you need only basic drivers support.
Note: if tvsu will fail to work, see this:
http://forums.lenovo.com/t5/ThinkVantage-Technologies/ThinkVantage-System-Update-Servers-down-the-wh...
It may look a looong tutorial, but once you do this for the first time, it will look a piece of cake.
Final words:
From now on, you can install windows 7 in UEFI mode with your special USB without changing your partition scheme anymore. If you have a data partition beside your os partition (see the example above), when you reinstall the system using your USB thumb drive, at the disk partition window chose the partition where windows is installed, delete it, and reinstall windows to the unformatted area. Your partition with your data will be intact and the installation will automatically mount your data partition to the system. And, all the scope of this procedure, you will always have a pure UEFI installation of the system, with all its benefits.
Have fun!
abvasili
Moderator note: changed subject to match new content. Was: Prepare an usb thumb drive, to boot windows 7 in UEFI mode
I'm just a volunteer. I like to help others where I can. Do my ideas work? I hope so. o_O
Who helped you today? Do not forget to thank him.
My hardware: TP x120e 0596-2ru. Windows 7, sp1, 64Bit, English, installed in UEFI mode.

seanare wrote:
Thank you, as I noted here, your post was the key to my getting a Windows 8 SecureBooting setup on a W530.
In the case of Windows 8, I needed to copy the files away, reformat my USB key as FAT32 and copy the files back, and viola I was able to boot from my USB install media with the BIOS set to only boot UEFI. From there, there rest was easy (for Windows 8, the copying and renaming is not necessary, the key is having a FAT32 partition on the USB media, rather than an NTFS one; the EFI files are already in the right location).
Thank you again good sir.
You are welcome... and I'm happy that the change of the file system helps with windows 8 too. Thanks for confirming that.
abvasili
I'm just a volunteer. I like to help others where I can. Do my ideas work? I hope so. o_O
Who helped you today? Do not forget to thank him.
My hardware: TP x120e 0596-2ru. Windows 7, sp1, 64Bit, English, installed in UEFI mode.

How to create bootable USB thumb drive from Lion on Mac Mini 2011?

Hello folks
Yesterday my new Mac Mini (Core i7 2,7 Ghz, 4 GB RAM, ATI Radeon HD6630M 256 MB) arrived. It replaces my old Mac Mini (Core Duo 1,83 Ghz, 2 GB RAM, Intel GMA950 64 MB). One day I'll replace the 500 GB 5400 RPM HDD in this Mini by an Intel SSD drive (just like I did with my previous Mini). I'll do a fully clean install then (formatting the SSD drive in Disk Utility and then installing Lion on it from a bootable USB thumb drive). The only problem is I can't seem to download Lion for free from the Mac AppStore (MAS) although I have bought a new Mac Mini which came with Lion pre-installed. I know how to create a bootable USB thumb drive with Lion on it when you download it from the MAS. But that's the problem... I can't seem to download Lion from the MAS for free. When I open the MAS while holding down the Option key I can download Lion but it will charge me for it. Is there any way I can download Lion from the MAS without paying for it? Since it already came with my new Mac Mini 2011 this should be possible I guess?
And will I still be able to download the iLife '11 apps (iPhoto, iMovie and Garageband) for FREE that came with my new Mac Mini when I do a fully clean install as described above? Thanks in advance.
Greetings
Jocau

After doing some research, it seems that there are only 2 WAYS to do a complete reinstall of Lion on the Mac Mini 2011 without paying for the Lion download in the Mac AppStore (i.e. recreating every partition, also the Recovery HD partition, from scratch e.g. when installing Lion on a clean HDD/SSD).
1) COMPLETELY clone the Mac Mini 2011 HDD including all of its partitions to an external drive and restore it when you want to do a complete reinstall.
2) Use the LION INTERNET RECOVERY feature built-in into new Macs that ship with Lion (this feature is present in new Macs starting from the Mac Mini 2011 and Macbook Air 2011).
OS X Lion: About Lion Recovery
Lion Internet Recovery
If you happen to encounter a situation in which you cannot start from the Recovery HD, such as your hard drive stopped responding or you installed a new hard drive without Mac OS X installed, new Mac models introduced after public availability of OS X Lion automatically use the Lion Internet Recovery feature if the Recovery HD (Command-R method above) doesn't work. Lion Internet Recovery lets you start your Mac directly from Apple's Servers. The system runs a quick test of your memory and hard drive to ensure there are no hardware issues.
Lion Internet Recovery presents a limited interface at first, with only the ability to select your preferred Wi-Fi network and, if needed, enter the WPA passphrase. Next, Lion Internet Recovery will download and start from a Recovery HD image. From there, you are offered all the same utilities and functions described above.
As with the Recovery HD, reinstallation of OS X Lion from Lion Internet Recovery requires an Internet connection. See "Supported network configurations and protocols" below.
Restoring iLife applications after Internet Restore of OS X Lion
If you reinstall Lion on a new Mac that shipped with OS X Lion installed, on an erased or replaced hard drive, you can download iPhoto, iMovie, and GarageBand from the Mac App Store.
After installation, start from Lion.
Double-click the App Store icon in the dock.
Enter your Apple ID and password.
Click Purchases.
If you haven't previously accepted your bundled iLife applications within the Mac App Store, you should see your iLife applications appear in the Accept portion of the screen. Click Accept.
You may be asked for your Apple ID and password once again. Your iLife applications now move to the Purchased section. These applications are part of the software that came with your Lion based computer. Your account will not be charged for them. Click Install to compete installation of your applications.
Source: Lion Recovery
It's a bit sad that these seem to be the only 2 options. Lion Internet Recovery is the preferred one here since my monthly internet traffic limit isn't a problem (but my download speed is). This problem could have been easily solved by Apple by just checking the system specs or serial number when trying to download Lion from the Mac AppStore. By using one of the 2 options in my previous sentence the Mac AppStore could see that I have a new Mac Mini 2011 that ships with Lion which would give me the option to download Lion from the Mac AppStore for free and eventually create a bootable USB thumb drive of it.

Using USB thumb drive with Parallels and Microsoft Windows XP

Similar Messages

Maybe you are looking for