Using Variable in AGO - TODATE - not working - only Integer?

Hi All,
I'm trying to do the following.
I have a dynamic variable Difference - which is pretty much:
YEAR (CURRENT_DATE) - YEAR (BASELINE_DATE)
This part is working fine.
When I'm trying to substitute it into the AGO function, I get syntax error:
AGO (Metric,Year_Level,VALUEOF(Difference) )
Is there a way to make this work?
Thanks

Look like there's a lot of related bugs on the metalink

Similar Messages

Recently purchased an unlocked iPhone4 handset only online. When my O2 sim card is used in handset it does not work. Any advice?

Recently purchased an unlocked iPhone4 handset only online. When my O2 sim card is used in handset it does not work. Any advice?

When you say it doesn't work, did it give you any type of message when you activated the phone with the O2 sim card?

My touch pad does not work only when using Safari browser. The screen was grey. Help!

My touch pad does not work only when I use Safari browser online. The screen was grey. No matter what I do, there is no reponse. Only the web address box works. What is this problem? I can use App Store and everything else fine.
Someone please help.
Thanks

I would try:
- Resetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Go to Settings>Safari and delete cache, history and cookies.

Ichat video not working only to one person

I've read most of the post on "i chat not working"; but has anyone had it to not work only to one individual. This is my case. I can video i chat with my son in FWB FL. with no problem. He has an Apple also. I can take my laptop to his location and video i chat with my sister-in-law in Jefferson Ga. But, I cannot video i chat with my sister-in-law from my location, Valrico, Fl. to her location in Jefferson Ga. I have had a 3 way phone conversation going with Apple, My internet provider and her internet provider and no one can solve the problem. Does anyone have any assistance they can provide. I'm not computer savy; so be patient and go slow and detail with me; thanks. Norm

More often than not this is about the way a modem or router or combo at either end use NAT.
NAT is Network Address Translation.
It is the way a device shares an Internet connection with several devices/computers.
However NAT means different things to different devices and not all devices therefore are doing what is called NAT the same way.
See here for further mind boggling
So what you may have is a device at either end that does not or will not play nicely with another device.
This can be particularly the case if the device has to use Port Forwarding or Port Triggering or is using the DMZ to open ports.
Using UPnP reduces the problem in many cases.
http://www.ralphjohns.co.uk/page15.html#CertainBuddy
Telling us what devices in the way of Modems and routers each end is using may help us pint to what can be changed.
Makes and models please with what they are doing to open the ports for iChat.
As Defcom has pointed out with certain connection it can be the Speed difference in the Internet connection both up and down that can be a factor.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:58 PM Monday; April 28, 2008

[svn] 4193: Bug: LCDS-517 - Reliable messaging destinations created using runtime configuration (bootstrap service) not working.

Revision: 4193
Author: [email protected]
Date: 2008-11-26 11:40:05 -0800 (Wed, 26 Nov 2008)
Log Message:
Bug: LCDS-517 - Reliable messaging destinations created using runtime configuration (bootstrap service) not working.
QA: Yes
Doc: No
Checkintests Pass: Yes
Details:
* Foundational update to include destination config in what we collect for runtime config exchange with new clients for destinations with network/reliable=true (LCDS only).
* Also typo in comment in AbstractConnectionAwareSession fixed.
Ticket Links:
http://bugs.adobe.com/jira/browse/LCDS-517
Modified Paths:
blazeds/trunk/modules/core/src/flex/messaging/AbstractConnectionAwareSession.java
blazeds/trunk/modules/core/src/flex/messaging/Destination.java
blazeds/trunk/modules/core/src/flex/messaging/services/AbstractService.java

Revision: 4193
Author: [email protected]
Date: 2008-11-26 11:40:05 -0800 (Wed, 26 Nov 2008)
Log Message:
Bug: LCDS-517 - Reliable messaging destinations created using runtime configuration (bootstrap service) not working.
QA: Yes
Doc: No
Checkintests Pass: Yes
Details:
* Foundational update to include destination config in what we collect for runtime config exchange with new clients for destinations with network/reliable=true (LCDS only).
* Also typo in comment in AbstractConnectionAwareSession fixed.
Ticket Links:
http://bugs.adobe.com/jira/browse/LCDS-517
Modified Paths:
blazeds/trunk/modules/core/src/flex/messaging/AbstractConnectionAwareSession.java
blazeds/trunk/modules/core/src/flex/messaging/Destination.java
blazeds/trunk/modules/core/src/flex/messaging/services/AbstractService.java

Brought a Cs6, it said i can used it tiwce, but is not working

brought a Cs6, it said i can used it tiwce, but is not working, and the key i had it only got 5part and start with english DSSxxx-xxxx

Have you managed to install it once? If so, just repeat that same process when you do it twice. You need a serial number to activate the installation. Serial numbers consist of 24 numbers, grouped as 6 sets of four numbers.

I just got a new macbook pro. How do I get the 900 songs that I took off of cds into iTunes on my computer from my iPhone. I had no problems syncing the music I had purchased from iTunes. I have tried to sync it using iTunes match, this did not work.

I just got a new macbook pro. How do I get the 900+ songs that I took off of cds into iTunes on my computer from my iPhone. I had no problems syncing the music I had purchased from iTunes. I have tried to sync it using iTunes match, this did not work. I would like to have access to my full library without going into the user profile of my old computer, which is on my new computers hard drive. I would like to eventually delete the old profile so that I have more space on my hard drive.

http://support.apple.com/kb/HT4527?viewlocale=en_US&locale=en_US

I clicked on "Erase all Content and Settings and now my ipad is not working, only the apple logo appears. how to i reset it back?

I clicked on "Erase all Content and Settings and now my ipad is not working, only the apple logo appears. how to i reset it back?
Some please show me how to reset it.

Here is some information from Apple:
http://support.apple.com/kb/TS3274
http://support.apple.com/kb/HT4057

Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work. Please help. Thanks.

Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work. Please help. I am getting lots of spelling errors as the MacBook laptop screen is too small. Thank you so much! .

Contentmom6 wrote:
Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work.
Normally, you just connect the monitor to the MacBook using a VGA adaptor that you can buy from an Apple Store. Now try System Preferences > Displays > Detect Displays. You should now be able to select a display mode for the monitor. If it still doesn't work, then I'd check that everything is properly connected. I've had problems with colours disappearing due to a faulty connection in the VGA adaptor.
Bob

My iPad mini is not syncing with my MAC. I'm trying to sync my photos using iTunes but it's not working. Help???

My iPad mini is not syncing with my MAC. I'm trying to sync my photos using iTunes but it's not working. Help???

Hello, flippytippi.
Thank you for visiting Apple Support Communities.
I would need a little more information regarding what exactly you are experiencing when attempting to sync photos to better assist you. However, here is a troubleshooting article that I would recommend going through.
iTunes: Unable to sync photos
http://support.apple.com/kb/TS3697
Cheers,
Jason H.

I am trying to trigger a custom event using a program but does not work ..

HI ....i am trying to trigger a custom event of a custom object type using a program but does not work. If trigger the same event using SWUE it works.
below is the code...
{Key = '0010001115'. "Sales Order Number (hard-coded)
CALL FUNCTION 'SWE_EVENT_CREATE'
EXPORTING
    objtype                       = 'ZXXXXXXXF'
    objkey                        = KEY
    event                         = 'ZEVENT'
CREATOR                       = ' '
TAKE_WORKITEM_REQUESTER       = ' '
START_WITH_DELAY              = ' '
START_RECFB_SYNCHRON          = ' '
NO_COMMIT_FOR_QUEUE           = ' '
DEBUG_FLAG                    = ' '
NO_LOGGING                    = ' '
IDENT                         =
IMPORTING
EVENT_ID                      =
RECEIVER_COUNT                =
TABLES
EVENT_CONTAINER               =
EXCEPTIONS
OBJTYPE_NOT_FOUND             = 1
OTHERS                        = 2}
Please guide me if i am missing something.

Hi Sunny,
I think you should try creating the event using FM SAP_WAPI_CREATE_EVENT.
CALL FUNCTION 'SAP_WAPI_CREATE_EVENT'
EXPORTING
    OBJECT_TYPE             = 'ZXXXXXXXF'
    OBJECT_KEY              = key
    EVENT                   = 'ZEVENT'
*   COMMIT_WORK             = 'X'
*   EVENT_LANGUAGE          = SY-LANGU
*   LANGUAGE                = SY-LANGU
*   USER                    = SY-UNAME
*   IFS_XML_CONTAINER       =
IMPORTING
   RETURN_CODE             = rcode
   EVENT_ID                = event_id
* TABLES
*   INPUT_CONTAINER         =
*   MESSAGE_LINES           =
*   MESSAGE_STRUCT          =
Regards,
Saumya

In the middel of updateing my IPod the connectione stopd and since then the device is not working. only white screen no connectivity to win or to the Appstore

In the middel of updateing my IPod the connectione stopd and since then the device is not working. only white screen no connectivity to win or to the Appstore

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

HT1212 i havnt changed my passcose and using the same passcode which i have been using since ages , its still not working, and i am 100 percent sure i am using the correct passcode ?

i havnt changed my passcose and using the same passcode which i have been using since ages , its still not working, and i am 100 percent sure i am using the correct passcode ?.,

Either way the result is the same... if you forgot (or don't know) your passcode, restore the device from backup on the last computer it was synced with when the passcode was turned on... this will remove the passcode. If you do not have access to the last computer it was synced with, you will have to force it into recovery mode & restore as a new device.

Just installed ios 7 on my 4s, and I have two issues: 1) control centre: the music controls do not work, only the volume adjust slider works; 2) in mail, where do you find the setting to control how many messages you want your inbox to retain?

Just installed ios 7 on my 4s, and I have two issues: 1) control centre: the music controls do not work, only the volume adjust slider works; 2) in mail, where do you find the setting to control how many messages you want your inbox to retain?

Same problem here on my 4s: Control center music controls do not work.
Since this thread has two issues, I'm going to start a new one with only the music control bug. Topic: iOS 7 Control Center Music Controls Not Working On iPhone 4s

[svn] 4226: Bug: LCDS-517 - Reliable messaging destinations created using runtime configuration (bootstrap service) not working.

Revision: 4226 Author: [email protected] Date: 2008-12-03 15:25:17 -0800 (Wed, 03 Dec 2008) Log Message: ----------- Bug: LCDS-517 - Reliable messaging destinations created using runtime configuration (bootstrap service) not working. QA: Yes Doc: No Checkintests Pass: Yes Details: * Make sure the <reliable/> option is treated as a nested element rather than an attribute of its parent <network> element. Ticket Links: ------------ http://bugs.adobe.com/jira/browse/LCDS-517 Modified Paths: -------------- blazeds/trunk/modules/core/src/flex/messaging/Destination.java

Revision: 4226 Author: [email protected] Date: 2008-12-03 15:25:17 -0800 (Wed, 03 Dec 2008) Log Message: ----------- Bug: LCDS-517 - Reliable messaging destinations created using runtime configuration (bootstrap service) not working. QA: Yes Doc: No Checkintests Pass: Yes Details: * Make sure the <reliable/> option is treated as a nested element rather than an attribute of its parent <network> element. Ticket Links: ------------ http://bugs.adobe.com/jira/browse/LCDS-517 Modified Paths: -------------- blazeds/trunk/modules/core/src/flex/messaging/Destination.java

Using Variable in AGO - TODATE - not working - only Integer?

Similar Messages

Maybe you are looking for