Using verizon890l-213e and when trying to use mapquest app ipad5 will not track
Using. Verizon 890l-213e and when trying to use mapquest app ipad5 will not track on the map
Try to plug it into itunes and click 'restore'. After the restore is complete, set the ipad up as a new one, NOT as a backup. This way it can install new software. Let me know if that works.
Similar Messages
-
Recently downloaded a trial version of CC and when trying to use the Adjustment Brush in ACR it brings up the message 'All the local adjustment controls are set to have no effect on the image'. I've downloaded this as an update to CS5 on my new i Mac. Would appreciate suggestions to remedy this. Rhonda
I think it means "the sliders are all 0 so painting adjustments with this brush won't change anything." In other words, move one of the sliders to a non-zero position, for example Exposure from 0 to 1.0, and then see what happens. You can edit the brush and change it to do something other than Exposure +1.
-
I´ve just changed my apple id password, and when trying to use Facetime, after having entered such new password, it won´t fullfill the calls, nor can I receive incoming calls, it simply gets disconnected. What do I do??
iOS: Troubleshooting FaceTime
Unable to make or receive FaceTime calls after April 16, 2014
Using FaceTime and iMessage behind a firewall
iOS: Troubleshooting FaceTime and iMessage activation
iOS: Using FaceTime
FaceTime, Game Center, Messages: Troubleshooting sign in issues -
I have a Iphone 4 gsm (8f190) and it will not connect to itunes and when i put it in recovery itunes will not work. It won't show up when plugged into the computer. Only charges when plugged in the wall or a car charger. I've tried everything imaginable but I can't get the phone to register in iTunes at all.. The phone won't even reset.. when i try and reset EVERYTHING on the phone the apple logo with the progress bar starts to come up but the progress never moves.. PLEASE help me.. I'm at my wits end with this phone and I'm ready to just trash it.
Dude you have a jailbroken phone as stated in your first post, no need to do a second post.
As per the forum term of service you can't get help here. Use google.
that's the downfall of jailbreaking your phone. -
I have a Iphone 4 gsm (8f190) and it will not connect to itunes and when i put it in recovery itunes will not work. It won't show up when plugged into the computer. Only charges when plugged in the wall or a car charger. I've tried everything imaginable but I can't get the phone to register in iTunes at all.. The phone won't even reset.. when i try and reset EVERYTHING on the phone the apple logo with the progress bar starts to come up but the progress never moves.. PLEASE help me.. I'm at my wits end with this phone and I'm ready to just trash it.
martinfromdevon wrote:
Warning to iPhone users. Do not start the update of the iPhone software using iTunes.
Nonsense, and very misleading advice. I've updated iPhone 3G, 3Gs,and 4 through itunes many times, never had a problem once, not with one single update in nearly 5 years of iPhones. Of course, I've never jailbroken my phones either. Hack your phone and have update problems? I've got news for you, the problems are not a result of iTunes or Apple's updates. -
I have purchased Mosaic World and it keeps crashing and when I try to restart it, it will not work. What do I do?
Hello Vicarage00,
It sounds like the app on your iPad is quitting unexpectedly. I recommend following the steps in the article below for an issue like this (you can skip the step to download another app from the App Store since it is not related to this issue):
iOS: Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/TS1702
Thank you for using Apple Support Communities.
Best,
Sheila M. -
how do you stop the connect to itunes to use push notifications to stop poping up in my app it will not let me get into the app
I have had this same issue but thankfully fixed it. Follow he steps below:
Sync your iPhone with you iTunes therefore your info is backed up. Unplug your phone.
Go to Settings > Reset > Erase All Content and Settings
Once your phone has reset and come back on answer the question until it asks if you want to back up from itunes Click this then plug your phone in.
After everything has sync'd back to your phone everything should work fine.
Hope this helps. -
I dropped my ipod classic and i tried turning it back on and it asks me to plug it in. I did so and it said the data was corrupted. I tried resetting it and it said something about fire wire? I looked on the internet and tried setting it to "Disk mode" and plugging it in and trying it that way, but it doesnt come up on my itunes. I tried diagnosing the issue on the ipod itself and I get to the "Accessorize test" and it says I dont have a FWPWR. How can I fix this??
Ok you got to make sure that you are the adiminstrtor on the computer. After you do that right click on my computer and hit properties. Make sure under the general tab that you are running windows (2000) service pack (4) or Windows XP Home or Pro service pack (2). After you have established that type in on the support search box uninstall itunes and quicktime for windows. Then once you have downloaded itunes restore the ipod and see if this fixes your problem.
-
will not allow certain images - for example, cannot see the images I need to copy on Craigslist in order for CL to approve my post.
== This happened ==
Every time Firefox opened
== we moved the computer and reconnected itCheck the image exceptions: Tools > Options > Content: Load Images: Exceptions - See [[Options window - Content panel]]
See [[Images or animations do not show]] and http://kb.mozillazine.org/Images_or_animations_do_not_load -
my ipad isnt working and hasnt for about a year, i ahve recently found and it and need to use it again. i have spent hours searching the internet to find solutions but none have worked. when trying to recover it (holding down the middle buttona nd th top for 10-115 seconds) all that comes across the screen are coloured lines. please help i need to use this again!!!
thankyouWhat to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
I have created an AIM account on my computer. When I go to sign into Ichat it does not let me sign in. It says my username/password is incorrect. Any help would be appreciated.
Hi,
Whenever I have created a Name at AIM then I have received an email to tell me (via the email I listed) that a name has been created.
Such as this:-
Thank you. An AOL account as been created using this email address.
To complete the registration and activate the account, please verify your email address by clicking the link below.
Yes, I made this request and I want to reserve this email address as part of the AOL account service
No, I did not make this request and I do not want my email address registered with the AOL account service
You will not be able to use this AOL account or make changes to the account until the registration is complete.
Thank you,
The AOL Team
(Some lines are links in the original)
The wording in the above is from an older confirmation email, I have a newer one has slightly different wording.
That is then followed by a "Thank for Confirming" email.
An @mac.com Apple ID that is also a valid AIM Screen Name is registered here
Keep the password to 16 characters or less (it's an AIM limit despite the prompts on the Site for longer).
The Apple ID (Using @mac.com) links one email to the @mac.com name. That email is a must but must not already be used with another Apple ID
7:30 PM Thursday; August 18, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb( 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
I can not get firefox to open when I click the icon. A box appears and tells me firefix is running but I can not find it anywhere. I have tried to delete it and everything else I can think of and it will not open. Please tell me what I can do.
Thank you Lisa BrownI used to have this problem on my old XP computer, too. The easiest way to fix it is to restart your computer. Use Shutdown and restart. This will stop the firefox process that is hanging and won't show up on your screen.
If you are somewhat computer literate, you can look at all your running processes by pressing Ctrl Shift Esc all at once using the three finger salute. Look at the list of processes to find firefox, highlight it, and select end process. Then go back and click on your shortcut to your firefox to regain control and display it on your screen.
Be sure to upgrade to the latest version of firefox, Version 5. It works much better than previous versions.
Fred -
When trying to drag a file, system will not release the file. Help!
Since installing an update to OSX Lion whenever I select a file and try to drag it to another location, the fle will not release. I have to reboot. This happens whether I use trackpad or magic mouse. How can I fix this? I do not have any assistive items turned on.
Have you tried repairing permissions?
Go to Applications, then to Utilities, then open Disc Utilities, select the disc that's indented, then select Verify Disc Permissions, and when that has run its course, select Repair Disc Permissions.
Hope that helps.
See also the official info here:
http://docs.info.apple.com/article.html?path=DiskUtility/10.5/en/duh17.html -
I installed vesrsion 4 and when I access my email my inbox will not open message 'undefined files'
My email does not work when i use version 4 of Firefox, the inbox has a message undefined files and will not open
Hello i also have this problem. I think it has some thing to do with the cookies because when i go to the link page to log into my email it says you must have cookies enabled.
but i have got them enabled so there`s a problem i think. -
I would like to be able to use my IPAD. Itunes will not install. It tells me it cannot start Apple Mobile Device Services I am using XP service Pack 3. I am the administrator. The message also says to verify that I have sufficient privileges to start system services.
Thank you,http://tinyurl.com/3hs3g2u
Maybe you are looking for
-
Error in SSO login page.
HI all, This time in windows 2000 Professional,I install infrastructure without error or warning(But in the installation log file I saw one error i.e., as follows.)(I put th error line into bold face.) Create Group URLrefreshed:oiddas/ui/oracle/ldap/
-
Decode a parameter to be all values
Hi- I would like to know if there is a way to decode a value of a parameter to all values for a particular column: ie can i DECODE(column_name, 'ALL', [something that represents all], 'Option1', 1, 'Option2', 2, 3) I have tried to use *- discoverer g
-
Where the XML file is generated
Hi, Im trying to upgrade our R3 4/7 to ERP6 ehp4. We have solution_manager Ehp1 witch is intalled. My Instance is known in the solution manager ( SMSY ) I have lauch a maintenance task ( i have select the coponant ) but i haven't see nowhere this XML
-
If I run any website contains more than one video like this website for example : http://www.neatoxv-21.org ,where it has two videos talking about the cleaning vacuum neato xv-21, and both videos are running at the same time, then suddenly the explor
-
Hi ! I have a table with session_ids, url a user visited and the time the did it. I need output pr. session_id Session id, durtaion of the session, the first page he visted, the last page he visited I have tried a lot with first_value, last_value, fi