Using VIP-Contacts on iPhone breaks banner notification for non-VIP mails

Hey,
as soon as I add a VIP contact in Mail (iPhone 4, iOS 6.0.1), the notification settings for VIP contacts are working nicely. However, for mails coming from non-VIP-contacts the normal notification settings are fully ignored, i.e. no banners etc. Is there a way to have special VIP notification settings but still have the standard notifications for all other mail, or is the observed behaviour an intended "feature"?
Cheers,
Claus

Update!
It seems the 2.1 iPhone update fixed this problem – at least when checking via VMware and Outlook.
Best regards,
Lars

Similar Messages

  • After i use 4.3.3 for iphone 4. the notification for facebook and yahoo do not work. what is wrong? anyone can help?

    after i use 4.3.3 for iphone 4. the notification for facebook and yahoo do not work. what is wrong? anyone can help?

    I am also on my forth hard drive on the same model.
    When I unpacked the computer, the hard drive did not include OS X either. Actually, it was completely blank. Did not even have a partition table! I have also had random problems with the machine not charging.
    I have replaced the drive myself with an SSD after figuring the Apple Certified technicians were incompetent. Now even the SSD is starting to fail
    I have bought an HP laptop and setup Ubuntu on it. Hope it turns out better than my previous four various Mac models. All have had various repeating hardware issues that Apple Certified technicians have been unable or unwilling to correct.

  • My problem is that after upgrade to IOS 6.1.3 my iphone not sounds! dont have sounds notifications for whatssap, FB, mails and can't listen music and talk with skype without headphones or speakers! only have vibrator and sound for one coming call!! what c

    My problem is that after upgrade to IOS 6.1.3 my iphone not sounds! dont have sounds notifications for whatssap, FB, mails and can't listen music and talk with skype without headphones or speakers! only have vibrator and sound for one coming call!! what can i do!???? Thanks a lot for help me!!!!

    I have a nearly identical problem with my Ipad 3. Mine is the left channel. I've yet to find help, but have found a number of other posts on this and other forums discussing the issue. People have tried restore, reset etc. Also, cleaning the ports with compressed air or cotton swabs. It appears to be a software issue, but no one is sure.
    Along with the original poster, I'd appreciate any help.
    As far as the 'level 6' poster, if you're going to be rude, please don't bother. Hope it was just a bad day.

  • How do I continue to use Mail on my MacBook2? i use iCloud on my iPhone and iPad but cannot receive my Mail account on my older MacBook.

    how do I continue to use Mail on my MacBook2? i use iCloud on my iPhone and iPad but cannot receive my Mail account on my older MacBook. I have followed the iCloud/move link as suggested but it doesn't give me the continue to use Mail option. Any help gratefully received.

    Welcome to the Apple Community.
    Delete your mail account from Mail preferences and set it up again using the Mail Server Information.
    Some users have apparently encountered issues using this information in pre-Lion set ups (I haven't), Roger Wilmut has kindly provided instructions for those who find themselves with this problem.
    Entering iCloud email settings manually in Snow Leopard or Leopard

  • HT201493 How do you change the settings for find my friends to use my contacts. When I signed in I selected do not allow iPhone to use my contacts and now all the names are in e mail format.

    When I opened the app I selected do not allow, to use my contacts, but now realise I should have allowed it. I have uninstalled and reloaded it, but it will not ask me to use my contacts again. Any ideas as now I see e mail names and not just the persons name.

    If you go to Settings > Notes > Default Account you will see "On My iPhone" as the default account and the only choice if you have not enabled syncing Notes in Settings >iCloud or Settings > Mail, Contacts, Calendars. If you have enabled syncing you can still select "On My iPhone" as the default account. When you are in the Notes app you won't see any accounts listed if you have not enabled syncing because they are all in the On My iPhone account and that is the only place possible. It is not a folder that you create.

  • Getting email notifications using EWS streaming notifications for a shared mail box

    Hi,
    I have been trying to get email notification for a shared mailbox using EWS streaming notifications. i am unable to get the notifications. Please can any one tell me how this task can be achieved.
    -Praveen

    I would recommend you to this link
    http://blogs.msdn.com/b/emeamsgdev/archive/2013/04/16/ews-streaming-notification-sample.aspx
    Mark Answered, if it solves your question and Vote if you found it helpful.
    Rohit Arora

  • Solution: Software Update Notifications for Non-Admin-Users

    This is a follow up to [that thread|http://discussions.apple.com/thread.jspa?threadID=1642646].
    Problem:
    Since I'm using Mac OS X the software update notification only appears if you are logged in as an user with administrative rights. In a real multiuser environment this makes sense, because the ordinary user should not be confused with things he's not responsible for. But what about the situation with the typical single user machine, where the owner uses a non-admin account for normal work. In this case this user IS the administrator, although he's using a non-admin account. In this very common case the user should get the software update notifications as he/she can react to it. But even if "Check for updates" is selected in System Preferences, there will be no notifications. You can argue if this is a bug or not.
    Solution:
    I wrote a little applescript (in fact it's embedded into a launchd plist file, so you only have to care about one file), that checks once per day if there are any software updates available. If so, they are displayed in a nice looking Growl notification, if Growl is installed (highly recommended!), or in a standard system dialog. This works for any user. I'm using it for over a year now without any problems and decided to make it available to everybody. You can download it [here|http://blog.kaputtendorf.de/2009/02/22/updatecheck>.
    Best regards,
    Sven

    good job! I also suggest you submit this to mac os x hints.
    http://www.macosxhints.com/

  • Push Notifications for Citrix Worx Mail??????

    We are currently using iOS 8.1.2 on all products.
    We are also using Citrix Worx Mail 10.0.0 Build 110.
    Push notifications for Worx Mail are not occurring after 5 min of inactivity on the phone.
    We are using the application to notify managers of operational events that are occurring and need operators to respond.
    It is critical that these notifications alert the managers.
    What can we do to ensure that the devices respond to push notifications in a timely manner.

    We also use Worx Mail and have the same issue.  However I know why this is happening.  Worx Mail uses Push for the calender,  but for Mail it relies on BAR in IOS (Background App Refresh ) This was due to complaints of battery life on earlier versions of Worx Mail.  I personally can't stand it.  So the only thing you can do is BE SURE your users have BAR turned on for Worx Mail in settings. 

  • BB 8330 Don't get e-mail notifications for new g-mail account.

    On my BB8330 I can get notifications for my Yahoo e-mails, but not my new G-mail. It must be something simple, but I can't figure it out. Can anyone help? Thank you, bdja

    Hello,
    I would recommend trying to take the battery out and restart the BlackBerry smartphone.
    Thanks
    -DrP
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • Adding a contact photo to a contact on iPhone breaks ActiveSync to Exchange

    This is a weird one... I have a user who has an original iPhone, we just upgraded her to 2.0 a week ago. She noticed that she lost her contact photos when we replaced her contacts with those stored on exchange. She added them back to the contacts on the phone and everything appeared fine. The problem came when she went to add an email address to a contact (which had a photo). It did not update on the iPhone.
    Adding a contact on the iphone synced, and modifying a contact that did not have photo synced. Modifying a contact on the computer (one which was not syncing to phone) synced to webmail, so that part of the sync (desktop to exchange) was working. If you remove the picture, it starts syncing again. Issue persists in 2.0.1.
    I will test on a iPhone 3G tomorrow and see if the problem persists on all phones and exchange accounts. Can anyone verify this on their setup? If it is not a problem for you are you using exchange 2007?
    Thanks!
    Setup:
    Exchange 2003 SP2
    Entourage 2004
    First Gen 8GB iPhone
    Workaround:
    Either remove photos, or disable active sync for contacts, enable syncservices to sync to OS X address book, and sync via cable.

    UPDATE: OK, today I tested with 3G iPhone, and there is no issue at all syncing (in fact, the contact picture appears as an attachment to the contact if viewed in webmail).
    I then setup another 1st Gen iPhone to the same exchange server, add a photo to the contact, made a change to the contact, and have the same problem -- no sync after photo added, syncs when photo is removed. I even deleted (from Entourage) a contact that I had added a picture to on the phone, and that change did not go to the iphone until I deleted the photo (Waited about 5 minutes). About 20-30 seconds after deleting the photo on the contact, it recognized that the contact was deleted from the exchange side, and pushed the deletion to the phone where it when poof right before my eyes like it's supposed.
    This is kind of baffling since you'd think the software is the same between the first gen and 3G after 2.0, but the problem is very re-creatable for me...]

  • Push  and banner notification for Email not working on Iphone 6

    Just got my iPhone 6 on Friday and I have my email set up to Push emails but that isn't happening. I'm getting them much later then they actually come to me and I'm not getting the banner on my phone when it does finally make it to my phone. I have all the setting correct that I can tell. I have it set up to notify me when email comes in via banner. Set up to notify me in lock screen as well.   Does anyone know if I'm missing a setting?  I notice now on this new system that in email set up I use to just have the Push option but now under Fetch - Push there is each mailbox listed and within them it says Fetch --- but I want Push not fetch......

    I have been having the same email problem for hours and my Iphone email is also not working. Unable to log into Verizon webmail as well.  I was finally able to get into my email account via Yahoo mail (yahoo/verizon accts linked). Still having issues with Outlook and my iPhone.

  • How To: Use FCPX to create iPhone Portrait Movies (and other non-standard formats)

    Goal: Use Final Cut Pro X 10.0.7 to produce a 640x1136 video (iPhone 5 Portrait). You can use these same steps to produce virtually any dimensions you want. My example is for the iPhone 5, in Portrait mode.
    This information is available in various places, but you have to realy work to find it, so I thought I'd post a step-by-step guide here.
    By the way, you might think you could just create a FCPX Project with your desired dimensions, but you can't (at least with 10.0.7). Projects only support certainly dimensions. But there are other ways, as the rest of this post describes:
    1) Create an initial movie with the desired dimensions, to serve as a template. We'll call it "Template.mov". The only thing that matters is the dimensions. It can be in any codec FCPX understands, and virtually any length.
    I'm using a 2 second video shot on my iPhone for the template. You could also create a blank image (.png, whatever) with the proper dimensions, copy and paste it into a new Quick Time Pro 7 window, and Export it using custom settings. There's lots of different ways to do this.
    2) Drop Template.mov into a FCPX event.
    3) Select Template.mov in the Event browser, and select File->Duplicate (or command-D). You probably could just edit "Template.mov", but it's a good idea to save it for reuse.
    3) Change the name of the copied video. I'm using "iPhone Video".
    4) Right-click "iPhone Video" and select "Open in Timeline".
    5) If you made the Template video from a still image, you may need to change the duration (ctrl+D). You don't have to make it very long, but it needs to be longer than 1 frame. A few seconds should be enough.
    6) Use this timeline like you'd use a project's timeline. Drop in new content, trim, transition, etc. There may be things you can't do in it, but I haven't found any yet. I'm guessing Chapters may not work, but I haven't tried them.
    7) Note that when you drop new content into the timeline, it may size funny. That's because the default setting for "Spacial Conform" is "Fit". Simply select the newly-dropped content, and in the Video settings inspector, scroll down to "Spacial Conform" and change it. You could use "Fill", which fills the frame vertically, or "None", which uses the source's original height. Then crop/transform/whatever to get what you want.
    8) When you're ready to render, select "iPhone Video" in the Event browser, then use the "Share" button. You want to use the "Export File" destination, which you may have to add. Pick your codec, and let 'er rip.
    9) When the rendering is done, you should have a video in your desired dimensions.
    That's all there is to it. Hope this helps someone.
    Dan
    PS: Don't ask why someone would want to create an iPod video using FCPX. The point is that you may need to create a video with non-standard  dimensions at some point in time, and this is how to do it.
    PPS: Most of this information came from http://library.creativecow.net/articles/payton_t/FCPX_Custom-Resolution-Timeline s/video-tutorial. I just wrote it down, while I tried to do what the video suggested.

    Instructions for using QuickTime Pro 7 to create a template video with unusual dimensions.
    I suspect that anyone savy enough to be using FCPX has probably already figured out how to do this, either using my technique or another, so there probably isn't a real need for me to post this. For that matter, I may be the only person who cares about this at all. However, while I was trying to learn how to do all of this, I would have really appreciated having all the information in one place, so here goes.
    If you want to create a video with unusual dimensions (like 640x1136) using my steps above, you'll need a "template" video first. Here's an easy way to create one, using any image editor, and QuickTime Pro 7.
    1) Open QuickTime Pro 7 (QTP for short).
    2) From the menu, select File->New Player. You'll get a window with just the bottom portion of the player, i.e. the playback controls.
    3) Using an image editor, create a still image in the desired dimensions. You can use any image editor. It doesn't matter what the image contains (although it will end up showing as a thumbnail in FCPX).
    4) Copy the image to the clipboard.
    5) Switch back to QTP, and paste the image into the new player. Don't worry that there isn't a video window showing - just paste it into the window that has only playback controls. As soon as you do, the video window appears.
    6) Advance to the end of the movie (the short, 1-frame movie), then hold down Command+V (paste) and keep holding it down to paste multiple images in. Watch the time advance. You could, if you want, just hold down Command+V until you get the length you want. But if you want a long video, there's an easier way:
    7) When you reach a few seconds (or whatever duration your patience allows), select all (Command+A) and copy (Command+C). Then hold down Command+V to keep pasting in the longer clips. Wait until you reach a longer duration, then repeat the process. So, for example, 1 second, then 10 seconds, then 1 minute, then 10 minutes, then 1 hour. Or whatever you want.
    8) Save the video however you want. I usually use File->Export with H.264, with Quality set to "Least". Just make sure you don't let it change the dimensions. If you resized the player window, depending on which "save" or "export" method you've chosen, it might default to the resized dimensions, so double check that to make sure.
    That's it. You now have a template video you can use with my previous post(s).
    Dan

  • Can I use Google Maps in iPhone application and charge for it?

    I'm looking to create a location-based application for the iphone that uses a map to display locations. I'd like to use a UIWebView to display Google Maps using their javascript API which shows a map hosted on my web site.
    When my app is finished, can I charge for it in the App Store, or will this be a violation of the Google Maps API Terms of Use?
    Are there any other non-free iPhone apps that embed Google Maps?
    Thanks, Scott

    My interpretation of the following:
    Google Maps API Terms of Service wrote:
    The API may be used only for services that are generally accessible to consumers without charge. Accordingly, You may not use the API for any service that requires a subscription or other restricted access, or for which a fee is charged.
    ... is that there's no way you can charge for an app that uses the API.

  • Can i use wifi while my iphone 4 is activating for 7 million hours????

    cause it is taking forever.

    You can use the phone on wifi. I waited a while for mine to activate on Wednesday and I turned it off and back on and a flood of texts appeared. They might have a flood of activations but if not active soon call your provider and let them no of the issue they might be able to push it through the system.

  • On my iPhone 4 The notifications for the Message app suddenly turned off when in silent mode. I have. I vibrate on but it does not vibrate when I get a text.

    My message app does not notify while on silent mode

    You iPhone likely has damage. Just because you don't see an external indicator doesn't mean it didn't get damaged internally.
    Take it to an Apple store for evaluation.  If there is physical damage, then unless you have the Apple Care Plus Protection Plan, you're looking at $149 for an Out Of Warranty replacement.

Maybe you are looking for