Using VISA can not find the com port
I use visa read but can't find any com port in Windows 7.
How can i find the com port in Windows 7??
由 jw2002 在 06-28-2009 09:20 AM
上編輯的訊息
由 jw2002 在 06-28-2009 09:20 AM
上編輯的訊息
Solved!
Go to Solution.
Windows 7 is not officially supported by National Instruments as it hasn't even been released. That means you won't get any official support from NI on this.
That said, does your computer actually recognize a serial port? Do you have an actual serial port, or do you have some sort of virtual COM port, or are you using some sort of adapter, such as a USB to serial port box? If it's any of the latter, the most likely reason is a driver issue which needs to be written to be compatible with Windows 7.
Similar Messages
-
My MacBook Pro can't find the FireWire port
My MacBook Pro (OSX 10.6.8) can not find the FireWire port. Until now there hasn't been any problems using the FireWire, but now it just deny any knowledge of it, so to speak.
The audio device lights up when I connect it to the MBP (yes, I did connect it when in off-mode), so it seems to work in a way.
Does anyone recognize this problem and knows how to solve it?
/JohanLaMarHave you tried following through the trouble shooting tips in this knowledge base article on Firewire?
-
VISA Assistant can not find the instrument.
I tried to control Agilent 34970A through RS232,
but the VISA Assistant can not find the instrument,
and there is no respond when I send a command to
the instrument. I am sure that the instrument is
good, and is set to RS232 interface, the cable is
right(verified), and the parameter such as baud
rate is the same as the computer.
(I am using LabVIEW 6.1)
Can anyone give me an explain about my problem?
Thank you very much!> "VISA Assistant" is the name of a utility that ships with Agilent VISA. I am not sure if it can work with NI-VISA.
Agilent VISA does work with NI-VISA -- provided everything is installed correctly. A user may wish to use both Agilent VISA and NI-VISA together if they have a mix of IO cards. If NI-VISA is present, then Agilent VISA should be installed in the side-by-side mode, and NI-MAX should set the Passport to On. Then LabVIEW will see all the Agilent cards, and Agilent VISA Assistant will see all the NI-Cards. (The last time I tried this though, NI-MAX didn't see the Agilent cards.)
What was not mentioned in the original question is what VISA configuration is being used. If more specifics are provided a more specific answer can be given.
[email protected] -
i have a pc and am using the trial version for now. I have readabout and seen on other computers, but no matter where i look or follow the dirrections i can not find the mini bridge what am i doing wrong. thank you
CC and CC2014 are the current versions of Photoshop. CC stands for Creative Cloud.
That being cleared up, a respectful request:
Topic or subject titles should be clear, pertinent and concise so that individual users can tell at a glance if they can help or not.
That field is not for attempting to fit your entire question in there.
Please keep this in mind next time you post. Thank you. -
How do i update my camera raw? I can not find the download update I've just brought a new d4s and I'm using the iMac with cs6 version. PLEASE HELP..
The Adobe auto updater is pretty decent in CS6. Just go to the Photoshop Help menu > Updates.
You will be able to update ACR, Photoshop and Bridge right there, if there are in fact updates available. -
I have transferred a load of files from my PC to my iMac using the migration assistant. The message on both machines say that the process was successful but I can not find the files on the mac. Any ideas?
When you use Migration Assitant it creates another user account and puts your files there. Please log out of your normal account and log into the new account. Had you use Setup Assistant when it asked if you were migrating that would not have occured. You have a couple of options, combine the two accounts (not recommended) or start over, use Setup Assistant and have everything in one user account. Here is a link to Pondin's guide for Lion Setup Assistant tips however if you want to combine the two accounts he has addressed that in
http://pondini.org/OSX/Transfer.html -
I have one folder with several projects all of which Aperure can not find the original. I do not use referenced files. I can't make any adjustments like cropping etc. What can I do to adjust or print any of these photos? IO have no ther projects with this problem. My Aperture Library is automatically saved to two external drives.
Dick KoosI have one folder with several projects all of which Aperure can not find the original.
Have you checked inside your Aperture library, if the original files are still there?
Try to find out, when the images in those projects have been originally imported, then open the Aperture library by ctrl-clicking it and using the command "Show package contents" from the pop-up menu. In the window that will open, select the folder "Masters" and browse the contents. You need to find the subfolder with the year you imported the images, then the folders with the month and the day.
Are your original files still there?
If yes, copy them to a folder on your desktop for safe-keeping, and then try, if repairing the permissions and the other Furst Aid tools will help Aperture to connect to these missing files again - see this link: Repairing and Rebuilding Your Aperture Library: Aperture 3 User Manual
If the First Aid Tools don't help, then check, if Aperture has moved the missing images to a "recovered folder". If not, reimport the images, you saved to your Desktop and use the Lift&Stamp tool to transfer any adjustment and captions to your reimported images. -
HT1528 I can not find the enable root user in, I am using Lion
I can not find the enable root user in, I am using Lion
First off, it is a "Bad" idea to enable 'root', as that is the one known account that exists on every Unix system. If 'root' is enabled, it makes it much easier to break into a Mac via the one account that has absolute control over everything.
Having said that...
i too do not observe in editor section enable root user when I perform what Kappy offered in link.
Did you click on "Login Options" to get the "Join..." button?
Did you click on "Open Directory Utility" ?
Did you go to the Menu Bar and click "Edit"? It should be right there 2/3's of the way down the "Edit" menu -> "Enable Root User"
If you want another way.
Start an Applications -> Utilities -> Terminal session
sudo su -
password: <enter your admin password here>
passwd
Changing password for root.
New password:
Retype new password:
You have now enabled 'root'. I hope you gave 'root' a very VERY STRONG password, as you have just opened yourself up for script kiddies to go after your root account. -
Hello, I'm using ubuntu with firefox5 and can not find the option to import my bookmarks file backup
Hello, I'm using ubuntu with firefox5 and can not find the option to import my bookmarks file backup
Is that Ubuntu 11.04?
Ubuntu 11.04 displays window menus in the control bar at the top of the screen<br />
Click on Bookmarks/Show All Bookmarks then move your mouse to the left upper corner toward Firefox Web Browser.<br />
You'll get pop up menu (Organize, Views and Import and Backup).<br /> -
Hello,
I need help before i go to the apple store for help.
My problem is that I have an Ipod touch which it was working fine but now it will not boot all the way.
It will not show the red bar when is ready to be turn off or reboot when using both buttons to reset it it will only come to the apple logo then goes blank.
I tried to restore via Itunes but same result, it will start showing is doing the extract then it will go blank and get a message saying that It can not find the device.
What do i need to do.
Thank you for your help.
regards,
Mario
PS. The OS I am not sure do not remember exactly.- Reboot the computer
- Try another USB port
- Try another cable try another cable
- Inspect the dock connector for bend or missing contacts, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Help:Can not find the file in jar!
Hello everyone:
I build a project using Netbeans 5.0 and make a jar file with it...
The code in the project as follows will throw an exception described that it can not find the file named datasource-config.xml
String dataFilePath = getClass().getResource(dataFile).getPath();
//System.out.println("filepath:"+dataFilePath);
InputStream input = new FileInputStream(dataFilePath);
when I run the project with the main() function as an entry it works perfectly and output:
filepath:/C:/projects/java_project/search/build/classes/com/cn/wxjt/lucene/config/datasource-config.xml
But when I compressed the project with jar and run it , it will show:
filepath:file:/C:/projects/java_project/search/dist/search.jar!/com/cn/wxjt/lucene/config/datasource-config.xml
there is a (!) between search.jar and /com/cn/wxjt...
I dont know why I generate a ! symbol in the file path... Is it cause the exception->
java.io.FileNotFoundException: file:\C:\projects\java_project\search\dist\search.jar!\com\cn\wxjt\lucene\config\datasource-config.xml
If you have any idea, plz tell me.
Thank you and best wishes to you !
:)If the file you want to read is in your jar file, use
getClass ().getResourceAsStream
(relative_path_file_name)Hope that help,
Jackhey jack i want to open the file as new File
i m using this.getClass().getResource("resource/backend.xml");
the resource is the directory inside the jar file.
when i prints the url it shows:
the jar file is in the WORK directory
URL : jar:file:/home/neeraj/WORK/show.jar!/resource/backend.xml
now when i creates new File using the url.getFile() method the file does not exist.
although the same programs runs well when i uses the InputStream
so plz tell me cant I create a new File from the above method????
thanks in advance
with regards
neeraj -
Can not find the the RBS tables after installing the Remote Blog Storage
Hi,
I am trying to configure the Remote Blob storage on my Sharepoint Server 2013. I am using the SQL Server Express 10.50.6000.
Everything is going fine, but I can not find the tables in the Database.
I am not sure where I did the wrong thing.
machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
but the installation is looking for some other.
Thanks in advance.
=== Verbose logging started: 3/23/2015 13:55:09 Build type: SHIP UNICODE 5.00.7601.00 Calling process: C:\Windows\system32\msiexec.exe ===
MSI (c) (44:F8) [13:55:09:000]: Resetting cached policy values
MSI (c) (44:F8) [13:55:09:000]: Machine policy value 'Debug' is 0
MSI (c) (44:F8) [13:55:09:000]: ******* RunEngine:
******* Product: RBS.msi
******* Action:
******* CommandLine: **********
MSI (c) (44:F8) [13:55:09:000]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (44:F8) [13:55:09:000]: Grabbed execution mutex.
MSI (c) (44:F8) [13:55:09:016]: Cloaking enabled.
MSI (c) (44:F8) [13:55:09:016]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (44:F8) [13:55:09:016]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (90:A4) [13:55:09:016]: Running installation inside multi-package transaction D:\RBS.msi
MSI (s) (90:A4) [13:55:09:016]: Grabbed execution mutex.
MSI (s) (90:34) [13:55:09:016]: Resetting cached policy values
MSI (s) (90:34) [13:55:09:016]: Machine policy value 'Debug' is 0
MSI (s) (90:34) [13:55:09:016]: ******* RunEngine:
******* Product: D:\RBS.msi
******* Action:
******* CommandLine: **********
MSI (s) (90:34) [13:55:09:031]: Machine policy value 'DisableUserInstalls' is 0
MSI (s) (90:34) [13:55:09:031]: Setting cached product context: User non-assigned for product: FB42F99F09B0E3646985F32DFE3C9C29
MSI (s) (90:34) [13:55:09:031]: Using cached product context: User non-assigned for product: FB42F99F09B0E3646985F32DFE3C9C29
MSI (s) (90:34) [13:55:09:031]: Setting cached product context: machine assigned for product: 000021599B0090400100000000F01FEC
115C834F46A5E33479CEE53534AD76A0
:34) [13:55:09:265]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
MSI (s) (90:34) [13:55:09:265]: Machine policy value 'DisableFlyWeightPatching' is 0
MSI (s) (90:34) [13:55:09:265]: Enabling baseline caching for this transaction since all active patches are MSI 3.0 style MSPs or at least one MSI 3.0 minor update patch is active
MSI (s) (90:34) [13:55:09:265]: APPCOMPAT: looking for appcompat database entry with ProductCode '{56D21E05-679B-40F2-94C1-DB0D7EB2E461}'.
MSI (s) (90:34) [13:55:09:265]: APPCOMPAT: no matching ProductCode found in database.
MSI (s) (90:34) [13:55:09:265]: Transforms are not secure.
MSI (s) (90:34) [13:55:09:265]: PROPERTY CHANGE: Adding MsiLogFileLocation property. Its value is 'D:\rbs_install_log.txt'.
MSI (s) (90:34) [13:55:09:265]: Command Line: TRUSTSERVERCERTIFICATE=true FILEGROUP=PRIMARY DBNAME=WSS_Content DBINSTANCE=jpntkyint01\sharepoint FILESTREAMFILEGROUP=RBSFilestreamProvider FILESTREAMSTORENAME=FilestreamProvider_1 CURRENTDIRECTORY=D:\ CLIENTUILEVEL=3 CLIENTPROCESSID=14660
MSI (s) (90:34) [13:55:09:265]: PROPERTY CHANGE: Adding PackageCode property. Its value is '{1AC68E73-94F1-4A01-B229-82B2F73C3326}'.
MSI (s) (90:34) [13:55:09:265]: Product Code passed to Engine.Initialize: '{56D21E05-679B-40F2-94C1-DB0D7EB2E461}'
MSI (s) (90:34) [13:55:09:265]: Product Code from property table before transforms: '{56D21E05-679B-40F2-94C1-DB0D7EB2E461}'
MSI (s) (90:34) [13:55:09:265]: Product Code from property table after transforms: '{56D21E05-679B-40F2-94C1-DB0D7EB2E461}'
MSI (s) (90:34) [13:55:09:265]: Product registered: entering maintenance mode
MSI (s) (90:34) [13:55:09:265]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
MSI (s) (90:34) [13:55:09:265]: Determined that existing product (either this product or the product being upgraded with a patch) is installed per-machine.
MSI (s) (90:34) [13:55:09:265]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
MSI (s) (90:34) [13:55:09:265]: Product {56D21E05-679B-40F2-94C1-DB0D7EB2E461} is admin assigned: LocalSystem owns the publish key.
MSI (s) (90:34) [13:55:09:265]: Product {56D21E05-679B-40F2-94C1-DB0D7EB2E461} is managed.
MSI (s) (90:34) [13:55:09:265]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
MSI (s) (90:34) [13:55:09:281]: MSI_LUA: Credential prompt not required, user is an admin
MSI (s) (90:34) [13:55:09:281]: PROPERTY CHANGE: Adding ProductState property. Its value is '5'.
MSI (s) (90:34) [13:55:09:281]: PROPERTY CHANGE: Adding ProductToBeRegistered property. Its value is '1'.
MSI (s) (90:34) [13:55:09:281]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
MSI (s) (90:34) [13:55:09:281]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
MSI (s) (90:34) [13:55:09:281]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer 3: 2
MSI (s) (90:34) [13:55:09:281]: Entering CMsiConfigurationManager::SetLastUsedSource.
MSI (s) (90:34) [13:55:09:281]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
MSI (s) (90:34) [13:55:09:281]: Specifed source is already in a list.
MSI (s) (90:34) [13:55:09:281]: User policy value 'SearchOrder' is 'nmu'
MSI (s) (90:34) [13:55:09:281]: Machine policy value 'DisableBrowse' is 0
MSI (s) (90:34) [13:55:09:281]: Machine policy value 'AllowLockdownBrowse' is 0
MSI (s) (90:34) [13:55:09:281]: Adding new sources is allowed.
MSI (s) (90:34) [13:55:09:281]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
MSI (s) (90:34) [13:55:09:281]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
MSI (s) (90:34) [13:55:09:281]: Package name retrieved from configuration data: 'RBS.msi'
MSI (s) (90:34) [13:55:09:281]: Note: 1: 2262 2: AdminProperties 3: -2147287038
MSI (s) (90:34) [13:55:09:281]: Machine policy value 'DisableMsi' is 1
MSI (s) (90:34) [13:55:09:281]: Machine policy value 'AlwaysInstallElevated' is 0
MSI (s) (90:34) [13:55:09:281]: User policy value 'AlwaysInstallElevated' is 0
MSI (s) (90:34) [13:55:09:281]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
MSI (s) (90:34) [13:55:09:281]: Product {56D21E05-679B-40F2-94C1-DB0D7EB2E461} is admin assigned: LocalSystem owns the publish key.
MSI (s) (90:34) [13:55:09:281]: Product {56D21E05-679B-40F2-94C1-DB0D7EB2E461} is managed.
MSI (s) (90:34) [13:55:09:281]: Running product '{56D21E05-679B-40F2-94C1-DB0D7EB2E461}' with elevated privileges: Product is assigned.
MSI (s) (90:34) [13:55:09:281]: PROPERTY CHANGE: Adding TRUSTSERVERCERTIFICATE property. Its value is 'true'.
MSI (s) (90:34) [13:55:09:281]: PROPERTY CHANGE: Modifying FILEGROUP property. Its current value is 'default'. Its new value: 'PRIMARY'.
MSI (s) (90:34) [13:55:09:281]: PROPERTY CHANGE: Adding DBNAME property. Its value is 'WSS_Content'.
MSI (s) (90:34) [13:55:09:281]: PROPERTY CHANGE: Adding DBINSTANCE property. Its value is 'jpntkyint01\sharepoint'.
MSI (s) (90:34) [13:55:09:281]: PROPERTY CHANGE: Modifying FILESTREAMFILEGROUP property. Its current value is 'default'. Its new value: 'RBSFilestreamProvider'.
MSI (s) (90:34) [13:55:09:281]: PROPERTY CHANGE: Adding FILESTREAMSTORENAME property. Its value is 'FilestreamProvider_1'.
MSI (s) (90:34) [13:55:09:281]: PROPERTY CHANGE: Adding CURRENTDIRECTORY property. Its value is 'D:\'.
MSI (s) (90:34) [13:55:09:281]: PROPERTY CHANGE: Adding CLIENTUILEVEL property. Its value is '3'.
MSI (s) (90:34) [13:55:09:281]: PROPERTY CHANGE: Adding CLIENTPROCESSID property. Its value is '14660'.
MSI (s) (90:34) [13:55:09:281]: Machine policy value 'DisableAutomaticApplicationShutdown' is 0
MSI (s) (90:34) [13:55:09:328]: PROPERTY CHANGE: Adding MsiRestartManagerSessionKey property. Its value is '489ffd242e95054781e9ce4b8d0b8aa5'.
MSI (s) (90:34) [13:55:09:328]: RESTART MANAGER: Session opened.
MSI (s) (90:34) [13:55:09:328]: TRANSFORMS property is now:
MSI (s) (90:34) [13:55:09:328]: PROPERTY CHANGE: Adding PRODUCTLANGUAGE property. Its value is '1033'.
MSI (s) (90:34) [13:55:09:328]: PROPERTY CHANGE: Adding VersionDatabase property. Its value is '300'.
MSI (s) (90:34) [13:55:09:328]: SHELL32::SHGetFolderPath returned: C:\Users\medsvradmin\AppData\Roaming
MSI (s) (90:34) [13:55:09:328]: SHELL32::SHGetFolderPath returned: C:\Users\medsvradmin\Favorites
Action ended 13:55:09: AppSearch. Return value 1.
Action start 13:55:09: ValidateProductID.
MSI (s) (90:34) [13:55:09:390]: Skipping action: Sqlmsirc_CheckLanguage_64 (condition is false)
MSI (s) (90:34) [13:55:09:390]: Doing action: CostInitialize
Action ended 13:55:09: ValidateProductID. Return value 1.
MSI (s) (90:34) [13:55:09:406]: Machine policy value 'MaxPatchCacheSize' is 10
MSI (s) (90:34) [13:55:09:406]: Baseline: Sorting baselines for {56D21E05-679B-40F2-94C1-DB0D7EB2E461}.
MSI (s) (90:34) [13:55:09:406]: Baseline: New baseline 10.50.1600 from transaction.
MSI (s) (90:34) [13:55:09:437]: Baseline: Sorted order Native: Order 0.
MSI (s) (90:34) [13:55:09:437]: Baseline Data Table:
MSI (s) (90:34) [13:55:09:437]: ProductCode: {56D21E05-679B-40F2-94C1-DB0D7EB2E461} Version: 10.50.1600 Attributes: 0 PatchId: Native BaselineId: -2147483648 Order: 0
MSI (s) (90:34) [13:55:09:437]: Baseline File Table:
MSI (s) (90:34) [13:55:09:437]: PROPERTY CHANGE: Adding ROOTDRIVE property. Its value is 'D:\'.
MSI (s) (90:34) [13:55:09:437]: PROPERTY CHANGE: Adding CostingComplete property. Its value is '0'.
MSI (s) (90:34) [13:55:09:453]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
MSI (s) (90:34) [13:55:09:453]: Note: 1: 2205 2: 3: Patch
MSI (s) (90:34) [13:55:09:453]: Note: 1: 2205 2: 3: PatchPackage
MSI (s) (90:34) [13:55:09:453]: Note: 1: 2205 2: 3: MsiPatchHeaders
MSI (s) (90:34) [13:55:09:453]: Note: 1: 2205 2: 3: __MsiPatchFileList
MSI (s) (90:34) [13:55:09:453]: Note: 1: 2205 2: 3: PatchPackage
MSI (s) (90:34) [13:55:09:453]: Note: 1: 2228 2: 3: PatchPackage 4: SELECT `DiskId`, `PatchId`, `LastSequence` FROM `Media`, `PatchPackage` WHERE `Media`.`DiskId`=`PatchPackage`.`Media_` ORDER BY `DiskId`
MSI (s) (90:34) [13:55:09:453]: Delta compression fallback method for this product transaction is 'MSI 2.0 legacy obsolescence'
MSI (s) (90:34) [13:55:09:453]: Note: 1: 2205 2: 3: Patch
Action start 13:55:09: CostInitialize.
MSI (s) (90:34) [13:55:09:453]: Doing action: FileCost
Action ended 13:55:09: CostInitialize. Return value 1.
MSI (s) (90:34) [13:55:09:468]: Note: 1: 2205 2: 3: Class
MSI (s) (90:34) [13:55:09:468]: Note: 1: 2205 2: 3: Extension
MSI (s) (90:34) [13:55:09:468]: Note: 1: 2205 2: 3: TypeLib
Action start 13:55:09: FileCost.
MSI (s) (90:34) [13:55:09:468]: Doing action: IsolateComponents
Action ended 13:55:09: FileCost. Return value 1.
Action start 13:55:09: IsolateComponents.
MSI (s) (90:34) [13:55:09:468]: Doing action: CostFinalize
GE: Adding ClientDir1025 property. Its value is 'C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\Client Library\ar\'.
MSI (s) (90:34) [13:55:09:593]: PROPERTY CHANGE: Modifying ServerDir property. Its current value is 'C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\Server'. Its new value: 'C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\Server\'.
MSI (s) (90:34) [13:55:09:593]: PROPERTY CHANGE: Modifying Eula1033 property. Its current value is 'C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\1033'. Its new value: 'C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\1033\'.
MSI (s) (90:34) [13:55:09:593]: Target path resolution complete. Dumping Directory table...
MSI (s) (90:34) [13:55:09:593]: Note: target paths subject to change (via custom actions or browsing)
MSI (s) (90:34) [13:55:09:593]: Dir (target): Key: TARGETDIR , Object: D:\
MSI (s) (90:34) [13:55:09:593]: Dir (target): Key: WindowsFolder , Object: C:\Windows\
MSI (s) (90:34) [13:55:09:593]: Dir (target): Key: ProgramFiles64Folder , Object: C:\Program Files\
MSI (s) (90:34) [13:55:09:593]: Dir (target): Key: INSTALLDIR , Object: C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\
MSI (s) (90:34) [13:55:09:593]: Dir (target): Key: GAC , Object: C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\
MSI (s) (90:34) [13:55:09:593]: Dir (target): Key: ClientDir , Object: C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\Client Library\
MSI (s) (90:34) [13:55:09:593]: Dir (target): Key: ClientDir3082 , Object: C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\Client Library\es\
MSI (s) (90:34) [13:55:09:593]: Dir (target): Key: ClientDir1025 , Object: C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\Client Library\ar\
MSI (s) (90:34) [13:55:09:593]: Dir (target): Key: ServerDir , Object: C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\Server\
MSI (s) (90:34) [13:55:09:593]: Dir (target): Key: Eula1033 , Object: C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\1033\
MSI (s) (90:34) [13:55:09:593]: Doing action: IsDotNet20Or40Installed
Action ended 13:55:09: CostFinalize. Return value 1.
MSI (s) (90:34) [13:55:09:593]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'IsDotNet20Or40Installed'
MSI (s) (90:34) [13:55:09:609]: Creating MSIHANDLE (1) of type 790542 for thread 9268
MSI (s) (90:6C) [13:55:09:609]: Invoking remote custom action. DLL: C:\Windows\Installer\MSIB261.tmp, Entrypoint: IsDotNetFramework20Or40Installed
MSI (s) (90:FC) [13:55:09:609]: Generating random cookie.
MSI (s) (90:FC) [13:55:09:609]: Created Custom Action Server with PID 14944 (0x3A60).
MSI (s) (90:D0) [13:55:09:640]: Running as a service.
MSI (s) (90:D0) [13:55:09:640]: Hello, I'm your 64bit Impersonated custom action server.
MSI (s) (90!08) [13:55:09:640]: PROPERTY CHANGE: Adding DOTNETCOREPATH property. Its value is '1'.
MSI (s) (90!08) [13:55:09:640]: PROPERTY CHANGE: Adding IsDotNet20Or40Installed property. Its value is '1'.
MSI (s) (90:6C) [13:55:09:640]: Closing MSIHANDLE (1) of type 790542 for thread 9268
One or more .NET Framework assemblies found in MsiAssembly table require the GAC, need to check for the .NET Framework
MSI (s) (90:34) [13:55:09:640]: Skipping action: CA_ErrorPrereqDotNet20Or40 (condition is false)
MSI (s) (90:34) [13:55:09:640]: Doing action: SqlFollowComponentsValidate_Redist_64
Action ended 13:55:09: IsDotNet20Or40Installed. Return value 1.
MSI (s) (90:34) [13:55:09:640]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'SqlFollowComponentsValidate_Redist_64'
MSI (s) (90:34) [13:55:09:687]: Creating MSIHANDLE (11) of type 790542 for thread 9268
MSI (s) (90:04) [13:55:09:687]: Invoking remote custom action. DLL: C:\Windows\Installer\MSIB281.tmp, Entrypoint: SqlFollowComponentsValidate
Action start 13:55:10: InstallServices.
MSI (s) (90:34) [13:55:10:498]: Doing action: StartServices
Action ended 13:55:10: InstallServices. Return value 1.
MSI (s) (90:34) [13:55:10:498]: Note: 1: 2205 2: 3: ServiceControl
MSI (s) (90:34) [13:55:10:498]: Note: 1: 2228 2: 3: ServiceControl 4: SELECT `Name`,`Wait`,`Arguments`,`Event`, `Action` FROM `ServiceControl`, `Component` WHERE `Component_` = `Component` AND (`Action` = 0 OR `Action` = 1 OR `Action` = 2)
Action start 13:55:10: StartServices.
MSI (s) (90:34) [13:55:10:498]: Doing action: RegisterUser
Action ended 13:55:10: StartServices. Return value 1.
Action start 13:55:10: RegisterUser.
MSI (s) (90:34) [13:55:10:498]: Doing action: RegisterProduct
Action ended 13:55:10: RegisterUser. Return value 0.
MSI (s) (90:34) [13:55:10:498]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
MSI (s) (90:34) [13:55:10:498]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
Action start 13:55:10: RegisterProduct.
MSI (s) (90:34) [13:55:10:498]: Doing action: PublishComponents
Action ended 13:55:10: RegisterProduct. Return value 1.
MSI (s) (90:34) [13:55:10:498]: Note: 1: 2205 2: 3: PublishComponent
MSI (s) (90:34) [13:55:10:498]: Note: 1: 2228 2: 3: PublishComponent 4: SELECT `PublishComponent`.`ComponentId`, `PublishComponent`.`Qualifier`, `PublishComponent`.`AppData`, `Feature`, `Component`.`ComponentId`, `Component`.`RuntimeFlags` FROM `PublishComponent`, `Component`, `Feature` WHERE `PublishComponent`.`Component_` = `Component`.`Component` AND `PublishComponent`.`Feature_` = `Feature`.`Feature` AND ((`Feature`.`Action` = 1 OR `Feature`.`Action` = 2) OR (`Feature`.`Action` = 4 AND `Feature`.`Installed` = 0) OR (`Feature`.`Action` = 3 AND (`Feature`.`Installed` = 1 OR `Feature`.`Installed` = 2 OR `Feature`.`Installed` = 4)))
Action start 13:55:10: PublishComponents.
MSI (s) (90:34) [13:55:10:498]: Doing action: MsiPublishAssemblies
Action ended 13:55:10: PublishComponents. Return value 0.
Action start 13:55:10: MsiPublishAssemblies.
MSI (s) (90:34) [13:55:10:498]: Doing action: PublishFeatures
Action ended 13:55:10: MsiPublishAssemblies. Return value 1.
MSI (s) (90:34) [13:55:10:498]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
MSI (s) (90:34) [13:55:10:498]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
Action start 13:55:10: PublishFeatures.
MSI (s) (90:34) [13:55:10:498]: Doing action: PublishProduct
Action ended 13:55:10: PublishFeatures. Return value 1.
MSI (s) (90:34) [13:55:10:513]: Resolving source to launched-from source.
MSI (s) (90:34) [13:55:10:513]: Setting launched-from source as last-used.
MSI (s) (90:34) [13:55:10:513]: PROPERTY CHANGE: Adding SourceDir property. Its value is 'D:\'.
MSI (s) (90:34) [13:55:10:513]: PROPERTY CHANGE: Adding SOURCEDIR property. Its value is 'D:\'.
MSI (s) (90:34) [13:55:10:513]: PROPERTY CHANGE: Adding SourcedirProduct property. Its value is '{56D21E05-679B-40F2-94C1-DB0D7EB2E461}'.
MSI (s) (90:34) [13:55:10:513]: SOURCEDIR ==> D:\
MSI (s) (90:34) [13:55:10:513]: SOURCEDIR product ==> {56D21E05-679B-40F2-94C1-DB0D7EB2E461}
MSI (s) (90:34) [13:55:10:529]: SECREPAIR: CryptAcquireContext succeeded
MSI (s) (90:34) [13:55:10:529]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
MSI (s) (90:34) [13:55:10:529]: Determining source type
MSI (s) (90:34) [13:55:10:529]: Source type from package 'RBS.msi': 2
MSI (s) (90:34) [13:55:10:529]: SECREPAIR: Hash Database: C:\Windows\Installer\SourceHash{56D21E05-679B-40F2-94C1-DB0D7EB2E461}
MSI (s) (90:34) [13:55:10:623]: SECREPAIR: Hash Value for the file:RBS.msi matched
MSI (s) (90:34) [13:55:10:623]: Source path resolution complete. Dumping Directory table...
MSI (s) (90:34) [13:55:10:623]: Dir (source): Key: TARGETDIR , Object: D:\ , LongSubPath: , ShortSubPath:
MSI (s) (90:34) [13:55:10:623]: Dir (source): Key: WindowsFolder , Object: D:\ , LongSubPath: , ShortSubPath:
MSI (s) (90:34) [13:55:10:623]: Dir (source): Key: ProgramFiles64Folder , Object: D:\ , LongSubPath: Program Files\ , ShortSubPath: PFiles\
MSI (s) (90:34) [13:55:10:623]: Dir (source): Key: INSTALLDIR , Object: D:\ , LongSubPath: Program Files\Microsoft SQL Remote Blob Storage 10.50\ , ShortSubPath: PFiles\jfw2d1_t\
MSI (s) (90:34) [13:55:10:623]: Dir (source): Key: Eula3082 , Object: D:\ , LongSubPath: Program Files\Microsoft SQL
MSI (s) (90:34) [13:55:10:623]: Dir (source): Key: DocsDir , Object: D:\ , LongSubPath: Program Files\Microsoft SQL Remote Blob Storage 10.50\Documentation\ , ShortSubPath: PFiles\jfw2d1_t\gsutoqfr\
MSI (s) (90:34) [13:55:10:623]: Dir (source): Key: MaintainerDir , Object: D:\ , LongSubPath: Program Files\Microsoft SQL Remote Blob Storage 10.50\Maintainer\ , ShortSubPath: PFiles\jfw2d1_t\jygjogya\
Files\jfw2d1_t\g-pfawke\pt-PT\
MSI (s) (90:34) [13:55:10:623]: Dir (source): Key: ClientDir2052 , Object: D:\ , LongSubPath: Program Files\Microsoft SQL Remote Blob Storage 10.50\Client Library\zh-CHS\ , ShortSubPath: PFiles\jfw2d1_t\g-pfawke\zh-CHS\
Action ended 13:55:10: PublishProduct. Return value 1.
MSI (s) (90:34) [13:55:10:638]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
MSI (s) (90:34) [13:55:10:638]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
MSI (s) (90:34) [13:55:10:638]: Note: 1: 2205 2: 3: Shortcut
MSI (s) (90:34) [13:55:10:638]: Note: 1: 2228 2: 3: Shortcut 4: SELECT `Shortcut`,`Name`, `FileName`, `Component`.`Directory_`, `Arguments`, `WkDir`, `Icon_`, `IconIndex`, `Hotkey`, `ShowCmd`, `Shortcut`.`Description`, `Shortcut`.`Directory_`, `Component`.`RuntimeFlags`, `Component`.`Action`, `Target`, `ComponentId`, `Feature`.`Action`, `Component`.`Installed`, `DisplayResourceDLL`, `DisplayResourceId`, `DescriptionResourceDLL`, `DescriptionResourceId` From `Shortcut`, `Feature`, `Component`, `File` WHERE `Target` = `Feature` AND `Shortcut`.`Component_` = `Component` AND `Component`.`KeyPath` = `File`.`File` AND ((`Feature`.`Action` = 1 OR `Feature`.`Action` = 2) OR (`Feature`.`Action` = 4 AND `Feature`.`Installed` = 0) OR (`Feature`.`Action` = 3 AND (`Feature`.`Installed` = 1 OR `Feature`.`Installed` = 2 OR `Feature`.`Installed` = 4)) OR (`Feature`.`Action` = NULL AND (`Component`.`Action` = 1 OR `Component`.`Action` = 2) AND (`Feature`.`Installed` = 1 OR `Feature`.`Installed` = 2 OR `Feature`.`Installed` = 4)))
Action start 13:55:10: CreateShortcuts.
MSI (s) (90:34) [13:55:10:638]: Doing action: FixCounters
Action ended 13:55:10: CreateShortcuts. Return value 0.
MSI (s) (90:34) [13:55:10:638]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'FixCounters'
Return value 0.
Action ended 13:55:20: INSTALL. Return value 1.
Property(S): DiskPrompt = [1]
Property(S): InstallMode = Typical
Property(S): DOTNET20SP = #2
Property(S): DOTNET35SP = #1
Property(S): DBINSTANCEREGISTRY = SHAREPOINT
Property(S): DBNAMEREGISTRY = WSS_Content
Property(S): FILESTREAMSTORENAMEREGISTRY = FilestreamProvider_1
Property(S): SCHEMASUFFIXREGISTRY = <suffix>
Property(S): WelcomeBmp = WelcomeBmp
Property(S): TRUSTSERVERCERTIFICATE = true
Property(S): SCHEDULEMAINTAINERTASK = 1
Property(S): MAINTAINERGC = GarbageCollection
Property(S): MAINTAINERREFSCAN = r
Property(S): MAINTAINERDELETE = d
Property(S): MAINTAINERORPHAN = o
Property(S): MAINTAINERCONSISTENCY = ConsistencyCheck
Property(S): MAINTAINERCONSISTENCYREPAIR = true
Property(S): OPENREADME = 1
Property(S): FilestreamPoolTranLifetimeUnit = time
Property(S): TEXTFILEVALUE = 0
Property(S): CONSOLEVALUE = 0
Property(S): DBTABLEVALUE = 0
Property(S): EVENTLOGVALUE = 4
Property(S): DBINSTANCE = jpntkyint01\sharepoint
Property(S): DBNAME = WSS_Content
Property(S): FILEGROUP = PRIMARY
Property(S): INTEGRATEDSECURITY = 1
Property(S): DBUSERNAME = username
Property(S): DBPASSWORD = **********
Property(S): FSDBINSTANCE = jpntkyint01\sharepoint
Property(S): FSDBNAME = WSS_Content
Property(S): FILESTREAMMETADATAFILEGROUP = PRIMARY
Property(S): FILESTREAMFILEGROUP = RBSFilestreamProvider
Property(S): FILESTREAMSTORENAME = FilestreamProvider_1
Property(S): SCHEMASUFFIX = <suffix>
Property(S): FILESTREAMTRANPOOLSIZE = 5
Property(S): FilestreamPoolTranLifetimeTime = 00:01:00
Property(S): FilestreamPoolTranLifetimeDays = 01
Property(S): FILESTREAMMAXPOOLSIZE = 200000
Property(S): FILESTREAMMAXSIZEINBANDWRITE = 1258290
Property(S): FILESTREAMMAXSIZEINBANDREAD = 1258290
Property(S): FILESTREAMMAXSIZEINLINEBLOB = 61140
Property(S): FILESTREAMWRITEALLOCATIONSIZE = 0
Property(S): MAINTAINERDURATION = 120
Property(S): SQLServerText1 = 0
Property(S): SQLServerVersionText3 = 0
Property(S): _IsMaintenance2 = Modify
Property(S): ModifyIcon = ModifyIco
Property(S): RepairIcon = RepairIco
Property(S): RemoveIcon = RemoveIco
Property(S): ErrorIcon = ErrorIco
Property(S): TARGETDIR = D:\
Property(S): USERNAME = Windows User
Property(S): _IsMaintenance = Reinstall
Property(S): AgreeToLicense = No
Property(S): Interrupted = 0
Property(S): SetupIcon = SetupIco
Property(S): Installed = 00:00:00
Property(S): CreateFilesNoUI = C:\Windows\system32\;D:\RBS.msi
Property(S): FixLogConfig = 4;0;0;0;0
Property(S): FixRemoteFilestreamStoreConfig = remotefilestream;C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\Provider Libraries\Filestream Provider\RemoteFilestreamProviderConfiguration.xml
Property(S): FixFilestreamStoreConfig = filestream;C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\Provider Libraries\Filestream Provider\FilestreamProviderConfiguration.xml
Property(S): RegisterProviderFile = RegisterFilestreamProvider.sql
Property(S): FILESTREAMTRANPOOLTRANLIFETIME = time 00:01:00
Property(S): IsDotNet20Or40Installed = 1
Property(S): ProgramMenuFolder.Sql = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\
Property(S): SAPBINOTEPAD = Notepad.exe
Property(S): MaintainerDir1025 = C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\Maintainer\ar\
Property(S): ClientDir3082 = C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\Client Library\es\
Property(S): FilestreamDir1025 = C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\Provider Libraries\Filestream Provider\ar\
Property(S): ProviderDir = C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\Provider Libraries\
Property(S): Eula3082 = C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\3082\
Property(S): ProgramFiles64Folder = C:\Program Files\
Property(S): SourceDir = D:\
Property(S): VersionNT = 601
Property(S): Privileged = 1
Property(S): Manufacturer = Microsoft Corporation
Property(S): ProductCode = {56D21E05-679B-40F2-94C1-DB0D7EB2E461}
Property(S): ProductLanguage = 1033
Property(S): ProductName = SQL Server 2008 R2 Remote Blob Store
Property(S): ProductVersion = 10.50.1600.1
Property(S): UpgradeCode = {BA2FF55A-725F-40E5-956E-D08AD0B8175B}
Property(S): ProductShortName = Remote Blob Store
Property(S): PlatformExtension = _64
Property(S): PlatformId = x64
Property(S): AppGuidRegKey = Redist_Uninstall_RegKey
Property(S): ARPPRODUCTICON = ARPIco
Property(S): ARPHELPLINK = http://www.microsoft.com/sqlserver
Property(S): PIDTemplate = 53934<````=````=````=````=`````>@@@@@
Property(S): PROMPTROLLBACKCOST = P
Property(S): INSTALLLEVEL = 100
Property(S): ALLUSERS = 1
Property(S): SuccessIcon = SuccessIco
Property(S): WarningIcon = WarningIco
Property(S): LicenseIcon = LicenseIco
Property(S): CompleteIcon = CompleteIco
Property(S): CustomIcon = CustomIco
Property(S): NewIcon = NewIco
Property(S): UpIcon = UpIco
Property(S): DialogBanner = BannerBmp
Property(S): Details = 0
Property(S): ReinstallModeText = omus
Property(S): Display_IsBitmapDlg = 1
Property(S): ProductID = none
Property(S): ISENABLEDWUSFINISHDIALOG = 1
Property(S): SQLServerVersionText1 = 0
Property(S): SQLServerVersionText2 = 0
Property(S): CA_ERRORCOUNT = 0
Property(S): CA_WARNINGCOUNT = 0
Property(S): CA_SUCCESSCOUNT = 0
Property(S): UI_SHOWCOPYRIGHT = yes
Property(S): ShowUserRegistrationDlg = 1
Property(S): ButtonTextStyle = {\ButtonTextStyle}
Property(S): DlgTextStyle = {\DlgTextStyle}
Property(S): DlgTextStyleB = {\DlgTextStyleB}
Property(S): DlgTitleStyle = {\DlgTitleStyle}
Property(S): DlgTitleStyleB = {\DlgTitleStyleB}
Property(S): FixedStyle = {\FixedStyle}
Property(S): Error_UninstallDependant = 1
Property(S): DefaultUIFont = Tahoma8
Property(S): ProductFeaturesDefined = 1
Property(S): RBSRegistryKey = Software\Microsoft\Remote Blob Storage
Property(S): SCHEMASUFFIXVALID = 0
Property(S): EnableCustomConfigDlg = 1
Property(S): EnableCustomRemoveDlg = 1
Property(S): EnableDotNetCheck = 1
Property(S): FXAssemblyVersion = 2.0.0.0
Property(S): VSAssemblyVersion = 8.0.0.0
Property(S): EnableFeatureDlg = 1
Property(S): MaintenanceWelcomeDlg_Next = MaintenanceTypeDlg
Property(S): ReadyToRemoveDlg_Back = MaintenanceTypeDlg
Property(S): CustomerInfoDlg_Next = ReadyToInstallDlg
Property(S): CustomerInfoDlg_Back = LicenseAgreementDlg
Property(S): ReadyToInstallDlg_NotInstalled_Back = CustomerInfoDlg
Property(S): ReadyToInstallDlg_Installed_Back = MaintenanceTypeDlg
Property(S): InstallWelcomeDlg_Next = LicenseAgreementDlg
Property(S): LicenseAgreementDlg_Back = InstallWelcomeDlg
Property(S): LicenseAgreementDlg_Next = CustomerInfoDlg
Property(S): ModuleID_REDISTBASE = SQLBASE_Redist_64
Property(S): ErrorDialog = ErrorDlg
Property(S): MsiLogFileLocation = D:\rbs_install_log.txt
Property(S): PackageCode = {1AC68E73-94F1-4A01-B229-82B2F73C3326}
Property(S): ProductState = 5
Property(S): ProductToBeRegistered = 1
Property(S): CURRENTDIRECTORY = D:\
Property(S): CLIENTUILEVEL = 3
Property(S): CLIENTPROCESSID = 14660
Property(S): PRODUCTLANGUAGE = 1033
Property(S): VersionDatabase = 300
Property(S): VersionMsi = 5.00
Property(S): VersionNT64 = 601
Property(S): WindowsBuild = 7601
Property(S): ServicePackLevel = 1
Property(S): ServicePackLevelMinor = 0
Property(S): MsiNTProductType = 3
Property(S): WindowsFolder = C:\Windows\
Property(S): WindowsVolume = C:\
Property(S): System64Folder = C:\Windows\system32\
Property(S): SystemFolder = C:\Windows\SysWOW64\
Property(S): RemoteAdminTS = 1
Property(S): TempFolder = C:\Users\MEDSVR~1\AppData\Local\Temp\
Property(S): ProgramFilesFolder = C:\Program Files (x86)\
Property(S): CommonFilesFolder = C:\Program Files (x86)\Common Files\
Property(S): CommonFiles64Folder = C:\Program Files\Common Files\
Property(S): AppDataFolder = C:\Users\medsvradmin\AppData\Roaming\
Property(S): FavoritesFolder = C:\Users\medsvradmin\Favorites\
Property(S): NetHoodFolder = C:\Users\medsvradmin\AppData\Roaming\Microsoft\Windows\Network Shortcuts\
Property(S): PersonalFolder = C:\Users\medsvradmin\Documents\
Property(S): PrintHoodFolder = C:\Users\medsvradmin\AppData\Roaming\Microsoft\Windows\Printer Shortcuts\
Property(S): RecentFolder = C:\Users\medsvradmin\AppData\Roaming\Microsoft\Windows\Recent\
Property(S): SendToFolder = C:\Users\medsvradmin\AppData\Roaming\Microsoft\Windows\SendTo\
Property(S): TemplateFolder = C:\ProgramData\Microsoft\Windows\Templates\
Property(S): CommonAppDataFolder = C:\ProgramData\
Property(S): LocalAppDataFolder = C:\Users\medsvradmin\AppData\Local\
Property(S): MyPicturesFolder = C:\Users\medsvradmin\Pictures\
Property(S): AdminToolsFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools\
Property(S): StartupFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\
Property(S): ProgramMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\
Property(S): StartMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\
Property(S): DesktopFolder = C:\Users\Public\Desktop\
Property(S): FontsFolder = C:\Windows\Fonts\
Property(S): GPTSupport = 1
Property(S): OLEAdvtSupport = 1
Property(S): ShellAdvtSupport = 1
Property(S): MsiAMD64 = 6
Property(S): Msix64 = 6
Property(S): Intel = 6
Property(S): PhysicalMemory = 8192
Property(S): VirtualMemory = 6311
Property(S): AdminUser = 1
Property(S): MsiTrueAdminUser = 1
Property(S): LogonUser = medsvradmin
Property(S): UserSID = S-1-5-21-300911508-3398273753-3262312657-1000
Property(S): UserLanguageID = 1033
Property(S): ComputerName = JPNTKYINT01
Property(S): SystemLanguageID = 1033
Property(S): ScreenX = 1024
Property(S): ScreenY = 768
Property(S): CaptionHeight = 19
Property(S): BorderTop = 1
Property(S): BorderSide = 1
Property(S): TextHeight = 16
Property(S): TextInternalLeading = 3
Property(S): ColorBits = 32
Property(S): TTCSupport = 1
Property(S): Time = 13:55:20
Property(S): Date = 3/23/2015
Property(S): MsiNetAssemblySupport = 4.0.30319.34209
Property(S): MsiWin32AssemblySupport = 6.1.7601.17514
Property(S): RedirectedDllSupport = 2
Property(S): MsiRunningElevated = 1
Property(S): DATABASE = C:\Windows\Installer\6847f.msi
Property(S): OriginalDatabase = D:\RBS.msi
Property(S): UILevel = 2
Property(S): ACTION = INSTALL
Property(S): ROOTDRIVE = D:\
Property(S): CostingComplete = 1
Property(S): OutOfDiskSpace = 0
Property(S): OutOfNoRbDiskSpace = 0
Property(S): PrimaryVolumeSpaceAvailable = 0
Property(S): PrimaryVolumeSpaceRequired = 0
Property(S): PrimaryVolumeSpaceRemaining = 0
Property(S): DOTNETCOREPATH = 1
Property(S): SourcedirProduct = {56D21E05-679B-40F2-94C1-DB0D7EB2E461}
Property(S): SOURCEDIR = D:\
MSI (s) (90:34) [13:55:20:201]: Note: 1: 1728
MSI (s) (90:34) [13:55:20:201]: Product: SQL Server 2008 R2 Remote Blob Store -- Configuration completed successfully.
MSI (s) (90:34) [13:55:20:201]: Windows Installer reconfigured the product. Product Name: SQL Server 2008 R2 Remote Blob Store. Product Version: 10.50.1600.1. Product Language: 1033. Manufacturer: Microsoft Corporation. Reconfiguration success or error status: 0.
MSI (s) (90:34) [13:55:20:217]: Deferring clean up of packages/files, if any exist
MSI (s) (90:34) [13:55:20:217]: MainEngineThread is returning 0
MSI (s) (90:A4) [13:55:20:217]: RESTART MANAGER: Session closed.
MSI (s) (90:A4) [13:55:20:217]: No System Restore sequence number for this installation.
=== Logging stopped: 3/23/2015 13:55:20 ===
MSI (s) (90:A4) [13:55:20:217]: User policy value 'DisableRollback' is 0
MSI (s) (90:A4) [13:55:20:217]: Machine policy value 'DisableRollback' is 0
MSI (s) (90:A4) [13:55:20:217]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (90:A4) [13:55:20:217]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (90:A4) [13:55:20:217]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (90:A4) [13:55:20:217]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (90:A4) [13:55:20:217]: Restoring environment variables
MSI (s) (90:A4) [13:55:20:217]: Destroying RemoteAPI object.
MSI (s) (90:FC) [13:55:20:233]: Custom Action Manager thread ending.
MSI (c) (44:F8) [13:55:20:233]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (44:F8) [13:55:20:233]: MainEngineThread is returning 0
=== Verbose logging stopped: 3/23/2015 13:55:20 ===I copied and pasted the strips from SSMS in another computer
CREATE
TABLE [dbo].[Taxonomy](
[fish_id] [numeric](38, 0)
IDENTITY(1,1)
NOT NULL,
[fish_order] [varchar](50)
NOT NULL,
[fish_family] [varchar](50)
NOT NULL,
[fish_genus] [varchar](50)
NOT NULL,
[fish_species] [varchar](50)
NOT NULL,
CONSTRAINT
[Taxonomy_pk] PRIMARY
KEY CLUSTERED
[fish_id] ASC
)WITH
(PAD_INDEX
= OFF,
STATISTICS_NORECOMPUTE =
OFF,
IGNORE_DUP_KEY =
OFF, ALLOW_ROW_LOCKS
= ON,
ALLOW_PAGE_LOCKS =
ON)
ON [PRIMARY]
ON [PRIMARY] -
Warnings in FileReference - can not find the cause
I'm trying to make a loader of a few photos (use FileReference). I get the warnings, but I do not know the reason for their appearance.
warning: unable to bind to property 'fr' on class 'Object' (class is not an IEventDispatcher)
warning: unable to bind to property 'name' on class 'flash.net::FileReference'
warning: unable to bind to property 'data' on class 'flash.net::FileReference'
warning: unable to bind to property 'fr' on class 'Object' (class is not an IEventDispatcher)
warning: unable to bind to property 'name' on class 'flash.net::FileReference'
warning: unable to bind to property 'data' on class 'flash.net::FileReference'
CODE:
import mx.events.CollectionEvent;
import flash.net.FileReferenceList;
import mx.collections.ArrayCollection;
[Bindable]
private var photos:ArrayCollection = new ArrayCollection;
private var frList:FileReferenceList = new FileReferenceList;
private function init():void
photos.addEventListener(CollectionEvent.COLLECTION_CHANGE,function():void
startUploadButton.enabled = (photos.length>0);
clearPhotosButton.enabled = (photos.length>0);
frList.addEventListener(Event.SELECT,addPhotos);
private function selectPhotos():void
var fileFilter:FileFilter = new FileFilter("Images jpeg","*.jpg;*.jpeg");
frList.browse([fileFilter]);
private function addPhotos(e:Event):void
for (var i:uint = 0; i < frList.fileList.length; i++)
var elem:Object = new Object;
elem.fr = FileReference(frList.fileList[i]);
elem.fr.load();
elem.fr.addEventListener(Event.COMPLETE,refreshThumb);
photos.addItem(elem);
private function refreshThumb(e:Event):void
photosList.invalidateList();
public function clearPhoto(data:Object):void
photos.removeItemAt(photos.getItemIndex(data));
photosList.invalidateList();
private function startUpload():void
photosProgressContainer.visible = true;
var request:URLRequest = new URLRequest();
request.url = "http://localhost/tempLoader-debug/upload.php";
var fr:FileReference = photos.getItemAt(0).fr;
fr.cancel();
fr.addEventListener(ProgressEvent.PROGRESS,uploadProgress);
fr.addEventListener(DataEvent.UPLOAD_COMPLETE_DATA,uploadComplete);
fr.upload(request);
private function uploadProgress(e:ProgressEvent):void
photosProgress.setProgress(e.bytesLoaded,e.bytesTotal);
private function uploadComplete(e:DataEvent):void
photos.removeItemAt(0);
photosList.invalidateList();
if (photos.length > 0)
startUpload();
else
photosProgressContainer.visible = false;In my opinion this is the line that is causing you the warning:
<mx:Image source="{data.fr.data}" maxWidth="100" maxHeight="75"
horizontalAlign="center" verticalAlign="middle" />
That means that data should be a custom binable object and fr should be another
custom bindable object.
like
public class BindableData
public var fr:BindableData2;
public class BindableData2
public var data:String;
I am not sure though what you are trying to do though, but I assume you try top
load an image from your disk. This link will help you:
view source enabled...
http://www.everythingflex.com/flex3/flexcampItaly/
the blog post ...
http://blog.everythingflex.com/2009/09/08/flexcamp-presentation-filereference-load-part-1- of-3/
C
From: Astraport2012 <[email protected]>
To: Ursica Claudiu <[email protected]>
Sent: Sun, October 3, 2010 3:07:57 PM
Subject: Re: Warnings in FileReference - can not find the cause
I found the solution to the first part of the warning. Only need to modify the
object as ObjectProxy
public var elem:ObjectProxy = new ObjectProxy;
But with the second part is still a problem (warning: unable to bind to property
'name' on class 'flash.net::FileReference'
warning: unable to bind to property 'data' on class 'flash.net::FileReference').
I do not fully describe the problem in the first message. The main application
calls the component and passes it parameters. They cause errors.
It is this component photoThumb.mxml:
<?xml version="1.0" encoding="utf-8"?>
width="120" height="110"
backgroundColor="#FFFFFF" backgroundAlpha="0"
rollOver="{controls.visible=true;}" rollOut="{controls.visible=false;}">
<mx:Image source="@Embed('t1.png')" width="100%" height="100%" alpha="0"
horizontalAlign="center" verticalAlign="middle"/>
<mx:VBox width="100%" height="90" y="5" horizontalAlign="center" >
<mx:Image source="{data.fr.data}" maxWidth="100" maxHeight="75"
horizontalAlign="center" verticalAlign="middle" />
</mx:VBox>
<mx:Label text="{data.fr.name}" width="118" truncateToFit="false" bottom="0"
textAlign="center" />
<mx:VBox id="controls" visible="false" y="65" right="10" horizontalAlign="right"
>
<mx:Button label="X" click="parentDocument.clearPhoto(data)" fontSize="6"
width="30" height="15" />
</mx:VBox>
</mx:Canvas -
I need to get raw plugin for Canon 5D Mark iii for CS6 the adobe website has changed and I can not find the download.. it keeps looping me back to the product download page without the raw
Which operating system are you using?
Have you tried Help>Updates from within photoshop cs6 to get either camera raw 8.3 or 8.7.1, which should enable photoshop cs6 to open the canon 5D Mark III files.
(version of camera raw depends on your operating system)
If that doesn't work try one of the following camera raw plugin installers:
Camera raw 8.7.1 plugin
https://helpx.adobe.com/x-productkb/multi/camera-raw-plug-in-installer.html
If you have windows xp or vista or mac os x snow leopard (10.6.8), then you'll have to use the camera raw 8.3 plugin installer:
https://helpx.adobe.com/x-productkb/multi/camera-raw-84-support-policy.html -
HT4623 I can not find the solfware update in the setting.Why?
I can not find the solfware update in the setting.Why?
That is only a feature of iOS 5 or later...
If you have iOS 4... See Here...
http://support.apple.com/kb/HT4972
OR...
Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
If an Update Appears Install it... if not... you are up to date for your particular Device...
See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch
Maybe you are looking for
-
My kids somehow erased my music library from the wallpaper of my iPod. I don't know how to access my music now. Please help!
-
PAPI client is running outside a j2ee container
Hi, I install BPM J2EE 10.3.1 for linux and weblogic 10.3 for linux on Red Hat Linux Enterprise 5. The database' version is 10.2.0.1 for windows and the database is install in window server 2003 sp1 on another machine. I search this forum and copy an
-
Awaiting delivery of an Iphone 6 from Verizon wireless
Hello all, On October 13th I went to an independent Verizon store and ordered an iphone 6 in space gray for 64 gb. The young man at the store didn't provide much service (distracted by a football game) but he was able to order me a new iphone. He sai
-
Instruction for how to use the dirver for a look in amplifier
Hello, I have downloaded an AMETEK SIGNAL RECOVERY (Formerly EG&G/PerkinElmer Instruments) LabView Driver Software for SIGNAL RECOVERY Lock-in Amplifiers Models 5109 and 5110 form www.signalrecovery.com I would like to know if support materials for t
-
Ansi X12, equivalent IDOCs list....
Hi all, Any body please provide me the information about IDOCs list equivalent to EDI ANSI X12,EDIFACT formats. Ex: Transaction Set/Document - >Purchase Order ANSI X12------->850 EDIFACT* ------->ORDERS