Using vista 64 bit with current versions of lightroom and CS3

Since the new versions of lightroom and photoshop are going to run on 64 bit I was thinking of upgrading to vista 64 bit. Will the present versions of lightroom and CS3 function in the vista 64 bit environment
thanks
Roger Lieberman

I use both LR & CS3 on both XP 64 and Vist 64. They wor just fine. In fact you get access to more RAM. Research your printer drivers etc though. That's an issue.
Doug BIbo

Similar Messages

I cannot sync to itunes on my computer (Windows Vista 32 bit) with my mini conected.

I cannot sync to itunes on my computer (Windows Vista 32 bit) with my mini connected. What should I do?
My Mini will not boot up. I tried holding both buttons down. I got a "connect to itunes" message. I connected. and nothing happens.

Hello there Chess-ster,
If I understand correctly your iPad mini is not being recognized in iTunes on your Windows Vista PC. I would recommend you use the troubleshooting in the following article:
iPhone, iPad, or iPod touch not recognized in iTunes for Windows
Start with these steps and work your way down as needed:
Restart
Turn off your computer and your iOS device, then turn them on again.
Update your computer
Check to make sure that you've installed all required updates for your computer.
Update iTunes
Check that you have the latest version of iTunes installed on your computer.
Check the USB cable
Verify that the 30-pin to USB cable or Lightning Connector to USB cable is free of debris and not damaged. If another cable is available, test with that cable instead.
USB cables that are bundled with third-party products or accessories might work only to charge those products and might not transmit data. Also, if you're using a third-party case or extended battery pack, try removing the case and connecting the Apple-supplied USB cable directly to your device.
Thank you for using Apple Support Communities.
Cheers,
Sterling

Problems with current version of AIR. Won't load and also can't uninstall

I have recently purchased a new Mac and loaded the most recent version of AIR but now when I try to run it I keep getting the following message
This application requires a version of Adobe AIR which cannot be found.
Please download the latest version of the runtime from
http://www.adobe.com/go/getair,
or contact the application author for an updated version.
I am also getting this message when I try and run the uninstaller so I can I can try and re-install.
Does anyone have any suggestions?
Thanks.

I had AIR 3 on my MacBook Pro before I updated it to Lion. I use AIR 3 to run McMillan Study guides Master your CDCs. when I updated my mac to lion and tried to run the application the application couldn't find AIR 3 on my mac. So I uninstalled it and tried to install it again. when I tried to install it the installer program doesn't open. please help me this program is crucial for my upgrade training.
From: lisachao <[email protected]>
To: A1C PD <[email protected]>
Sent: Monday, October 24, 2011 12:35 PM
Subject: Problems with current version of AIR. Won't load and also can't uninstall
Re: Problems with current version of AIR. Won't load and also can't uninstall created by lisachao in Installation Issues - View the full discussion
Is this the error you are getting when you are installing AIR 3.0? Or is this the error you are getting after you've already installed AIR 3.0 and attempting to run AIR applications? If it's the latter, which applications are you trying to run? Can you please send us your logs so that we can investigate further? Thanks!
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3987820#3987820
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3987820#3987820. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Installation Issues by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

When downloading 10.5.2 version of itunes to Microsoft Vista 32 bit it gets to 68% downloaded and hangs then eventuall times out. No error msg given. What is it waiting for?

When downloading 10.5.2 version of itunes to Microsoft Vista 32 bit it gets to 68% downloaded and hangs then eventuall times out. No error msg given. What is it waiting for?

Finally got it working, I had to delete two solitary files in an iTunes folder.
C:\ProgramData\Apple Computer\iTunes\SC Info
Delete the only two files that are in this folder. Please note that it is a hidden folder.
After they have been deleted, iTunes should work (it did for me)
This may not work if your iTunes.exe process (viewable with task manager) turns off after the license agreement. I solved that problem by updating quicktime.
iTunes 10.5.2 doesn't update quicktime like all the previous installers did.

I am going to update my PC to windows 7 (from XP), how can i backup my current version of firefox and use it on the updated OS?

since support for XP is done and continued use puts my PC at risk, I am going to install Windows 7. I want to know how i can do a full back up of my current version of Firefox and then run it on the updated OS; i have lots of add-ons that I don't want to lose and then have to go through the whole process of reinstalling and customizing.
(currently running Firefox v28.0)

It would be best to be cautious with copying a full profile folder from Windows XP to Windows 7 as the file structure is completely different.
*C:\Documents and Settings\<user>\Application Data\Mozilla\Firefox\Profiles\<profile>\
*C:\Users\<user>\AppData\Roaming\Mozilla\Firefox\Profiles\<profile>\
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Can not use default screen saver with this version of Mac OS X

Hello,
I created a 10.6.4 image on a Mac Pro that I have installed on a new 27" iMac. Every thing works fine, as expected, except the screen savers (all Apple default). All screen savers appear in the list when booted off the Mac Pro, but when booted off the iMac, all but 2 disappear (Computer Name and Flurry). Also, the ones listed under Pictures show up, but when I try to use one it says "Can not use 'screen saver name' with this version of Mac OS X - Contact your vendor."
Also, the flurry screen saver runs extremely slow.
Unfortunately, I don't have another iMac to compare versions with, but I've compared with a new Macbook Pro and they are exactly the same. Is there a cache or a pref I can flush?

The old screensavers were about the first things that didn't work when moving to Snow Leopard, so my guess would be the iMac is booting in 32-bit vs 64-bit mode (or whichever mode is incompatible with your screensavers).

[svn:fx-4.0.0] 14150: revert the rollback of revision# 13951 to have the automation swcs built with current version of the SDK

Revision: 14150
Revision: 14150
Author:   [email protected]
Date:     2010-02-12 12:36:19 -0800 (Fri, 12 Feb 2010)
Log Message:
revert the rollback of revision# 13951 to have the automation swcs built with current version of the SDK
QE notes: no
Doc notes: no
Bugs: FLEXENT-1230
Reviewer: lauren
Tests run: checkintests
Is noteworthy for integration: no
Ticket Links:
    http://bugs.adobe.com/jira/browse/FLEXENT-1230
Modified Paths:
    flex/sdk/branches/4.0.0/frameworks/libs/automation_agent.swc
    flex/sdk/branches/4.0.0/frameworks/libs/qtp.swc
    flex/sdk/branches/4.0.0/frameworks/libs/qtp_air.swc
    flex/sdk/branches/4.0.0/frameworks/locale/da_DK/automation_agent_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/da_DK/qtp_air_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/de_DE/automation_agent_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/de_DE/qtp_air_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/en_US/automation_agent_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/en_US/qtp_air_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/es_ES/automation_agent_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/es_ES/qtp_air_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/fi_FI/automation_agent_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/fi_FI/qtp_air_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/fr_FR/automation_agent_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/fr_FR/qtp_air_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/it_IT/automation_agent_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/it_IT/qtp_air_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/ja_JP/automation_agent_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/ja_JP/qtp_air_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/ko_KR/automation_agent_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/ko_KR/qtp_air_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/nb_NO/automation_agent_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/nb_NO/qtp_air_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/nl_NL/automation_agent_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/nl_NL/qtp_air_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/pt_BR/automation_agent_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/pt_BR/qtp_air_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/ru_RU/automation_agent_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/ru_RU/qtp_air_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/sv_SE/automation_agent_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/sv_SE/qtp_air_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/zh_CN/automation_agent_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/zh_CN/qtp_air_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/zh_tw/automation_agent_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/zh_tw/qtp_air_rb.swc
Removed Paths:
    flex/sdk/branches/4.0.0/frameworks/projects/automation_air/bundles/
    flex/sdk/branches/4.0.0/frameworks/projects/automation_dmv/bundles/
    flex/sdk/branches/4.0.0/frameworks/projects/automation_flashflexkit/bundles/
    flex/sdk/branches/4.0.0/frameworks/projects/automation_spark/bundles/
Property Changed:
    flex/sdk/branches/4.0.0/

Credit Tony E
To downgrade to Firefox 3.6 first uninstall Firefox 4, but do not select the option to "Remove my Firefox personal data". If you select that option it will delete your bookmarks, passwords and other user data. See https://support.mozilla.com/kb/Uninstalling+Firefox
You can then install the latest version of Firefox 3.6 available from http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your current bookmarks, passwords etc.
To avoid possible problems with downgrading, I recommend going to your profile folder and deleting the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Deleting these files will force Firefox to rebuild the list of installed extensions, checking their compatibility, and reset toolbar customizations.
For details of how to find your profile folder see https://support.mozilla.com/kb/Profiles

How do i remove the songs from my iphone used to be easy with old version of itunes just unticked them but cant seem to find it any where on new version

how do i remove the songs from my iphone used to be easy with old version of itunes just unticked them but cant seem to find it any where on new version

how do i remove the songs from my iphone used to be easy with old version of itunes just unticked them but cant seem to find it any where on new version

Moved Premiere Elements 10 project Error: "Project is not compatible with current version of Premiere Elements"

After moving an entire client folder from an external hard drive to an internal one, the client's video, created in adobe premiere elements 10, will no longer open in adobe premiere elements 10. It appears to be loading the project, and instead of completing, the following error message is displayed: "The project is not compatible with current version of Premiere Elements."
The same thing occurs when attempting to open the archive files.
New projects, and unmoved projects behave properly.
Moved projects receive this error.
I'm running Windows 7 Home Premium SP1 on a solid state drive (SSD) (c:/), where premiere elements is installed
My documents, including the project I need to work with are on my "storage" drive (HDD). it is (f:/)

txnoda
Archiving Aspects of this.....
First let clear the matter of the "archiving" as a life saver.... We do not appear to be on the same wave length.
a. I am talking about File Menu/Project Archiver with its Archive project and Copy project options. This feature is a safety net to save you when you
inadvertently disconnect source media from the project file. With the Archive option (Trimmed Folder result), you get saved to the computer hard drive (safe keeping) a copy of the project file plus copies of the media that were taken to the Timeline. With the Copy option (Copied Folder result), you get copy of the project files plus copies of much more.
b. Instead, you appear to be talking about "archiving" in the context of AutoSaves. AutoSaves are saved snapshots of the project at various phases of the edit. They suffer from the same shortcomings of the original project that has been disconnected from its source media.
When you import media into a project, all you get are copies of the originals in the project. But, those copies need to trace back to originals at the locations where they were when first imported into the project. Moving, renaming, deleting files/folders that went into the project after the project save close leads to some very time consuming messy situations.
What to do....
If you can, put everything back the way it was. If not.....
Let me emphasis some factors..
You wrote
After moving an entire client folder from an external hard drive to an internal one, the client's video, created in adobe premiere elements 10, will no longer open in adobe premiere elements 10. It appears to be loading the project, and instead of completing, the following error message is displayed: "The project is not compatible with current version of Premiere Elements."
Here you mention specifically "client's video". Later you detail with .mod files converted to .avi. What kind of .avi? If you have converted to AVCHD.avi or H.264.avi, they have been found not to be compatible with Premiere Elements. You should not be able to import them into any new or old project.
From what you described, I am envisioning
"Video" Folder
which contains 2 folders named
"Timestamped Folder" with .avi files
and
"DVD" Folder with the project file (project.prel)
The project file has many files generated automatically in the course of it workflow. Where do you have them going?
(See Premiere Elements 10 Edit Menu/Preferences/Scratch Discs). If you have the Scratch Discs directed
"Same As Project", then we would expect all those files to be going to the DVD Folder in the above scenario.
If we could open the project and get greeted with some "Where is the file.....?" messages, that might give us some hope.
But that is not the case.
Consequently from what you have said, I am suggesting that the path of least resistance is try to recreate the "before".
Please review and consider.
ATR
Add On...Not sure if it will assist in the matter, but the following is the link to Adobe's document related to troubleshooting
damaged projects.
Troubleshoot a damaged project file | Adobe Premiere Elements

PE 13 - Project not compatible with current version of premier elements

I have PE 13 (recently installed on a system that also has PE 10)
I archived in PE 10 to a location, openend up the project with PE 13 and it appears to open just fine. I then save and close it and try to open it up a 2nd time and it fails with the error: "Project Not compatible with current version of premier elements"
I attempted to move all the media outside of the "Copied_XXX" folder per the troubleshooting steps, but it still fails even with all the media in a different location. Funny thing is that it knows about the media still because it appears in the loading content status bar at the very bottom left of the screen. it completes all 600 or so loads, but they are definitely not on timeline or listed in project assets.
Windows 7 Professional is the OS.

stegeler
There is no guarantee that a project created in an earlier version will open in a later one. The classical recommendation is to finish a project in the version in which it is created.
If you do want to try to edit the project created in the earlier version in the later version, then make sure to work from a copy of the original. Once you edit the project created in the earlier version in the later version, you cannot go back to edit the later version edited project in the earlier version.
If you have your Premiere Elements 10 project archived, then you do not want to go moving copies of the project's source media outside that Copied Folder. The copy of the project file in that folder needs to trace back to that copied media in that Copied Folder. What you are seeing in Premiere Elements 13 is probably conforming of audio and video files, processing of rendered files, and such, maybe even some indexing. You do not want to proceed in Premiere Elements 13 until you do not see any further activity in the progress bar at the bottom right of the workspace. Have Premiere Elements 10 and 13 been on the same computer?
How did you open the project file in the Copied Folder - right clicked the project file, Open With, and then selected Adobe Premiere Elements 13? What is the duration of the Timeline of the original project in 10?
Have you been working with a copy of the Copied Folder and its contents?
More on this in the morning.
ATR

Iphoto will not import my photos from my digital camera because it says it is having a problem downloading my photos. I'm using the same digital camera I have always had and have the current version of iphoto and am usuin snowleapord. Any thoughts?

iphoto will not import my photos from my digital camera because it says it is having a problem downloading my photos. I'm using the same digital camera I have always had and have the current version of iphoto and am using snowleapord 10.6.8. Any thoughts?

As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

I only use Windows XP, is there a version of Lightroom that will work with XP

I only use Windows XP, is there a version of Lightroom that will work with XP

Yes if you want to run Version 1....you can still download version 1.4.1 (the last update to Version 1), and your serial number would be good for that.
But if you want to run Version 2 or Version 3 you'll need to buy a new license (i.e. a new serial number), but if you have a valid serial number from any prior version you only have to pay for the upgrade license for the later version, not the full license.

"YOU CANNOT USE THIS APPLICATION SAFARI WITH THIS VERSION OF MAC OS X"

hi, just downloaded the update for mac 10.5.1 - all went well - then tried to open Safari and received this message "YOU CANNOT USE THIS APPLICATION SAFARI WITH THIS VERSION OF MAC OS X" - I have tried downloading Safari again through netscape but that does not seem to work either - ANY IDEAS???? Thanks

It sounds likely that you have more than one copy of Safari on your hard drive. The one in your Applications folder is the one you should have. The one you're trying to launch is an older version that somehow got moved somewhere else, so that the new version got installed in your Applications folder (where it should be) while the old version is running (or trying to run) from another location.
First, double-click on the Safari application file that you have in your Applications folder. Does it run properly, without error messages? If so, everything is fine. You just need to get rid of the old version of Safari and set it up so you can easily launch the new version that is in your Applications folder.
Are you clicking on the Safari icon in your Dock when you see the error message? If so, do this: Control-click on the Safari icon in your Dock and select "Show in Finder" from the contextual menu. A Finder window should open showing the location of that copy of Safari. If that Finder window is any location other than the Applications folder, delete the Safari file that is in that folder. Then drag the Safari icon out of your Dock. Navigate to your Applications folder and drag the Safari file from the Applications folder to your Dock.
You should be all set, but click on the new Safari icon in your Dock to make sure it is the correct version and runs without problems.
Message was edited by: Rachel R

" You cannot use the application "iTunes" with this version of MAC OS X."

I am getting the response " You cannot use the application "iTunes" with this version of MAC OS X." How do i get Itunes on my Mac. I tried to download the newest version but it won't let me do that either.

What operating system version are you using on your Macbook? If you are still using Tiger 10.4 the new iTunes requires Leopard (10.5) or higher.

I have a US Mac living in the UK. I tried to download both the British and American version. Both state "You cannot use the application Firefox with this version of MAC OSX". Any suggestions how to proceed?

I have a US Mac living in the UK. I tried to download both the British and American version. Both state "You cannot use the application Firefox with this version of MAC OSX". Any suggestions how to proceed?

Firefox 4 requires at least OS X 10.5 and an Intel Mac. You can get the latest version of Firefox 3.6 which works on OS X 10.4 from http://www.mozilla.com/en-US/firefox/all-older.html

Using vista 64 bit with current versions of lightroom and CS3

Similar Messages

Maybe you are looking for