Using Vista operating system Firefox Version 3.05 tried to update to new version but after download it goes to run then my only option is save the file it will not run the file.

the firefox set 7.01 up file can be downloaded but will not run do I have to update to 4 the 5 up to 7?
download run setup
unable too run setup everytime

The longer this thread continues, the more ancillary comments you throw in that aren't directly pertinent to your problem with your DVR software not working with Firefox 4.0. Sorry, I don't intend to continue with this discussion.
I do agree that ''something'' needs to be done better with regards to plugins for Firefox, but I do disagree with you as to whose responsibility that ''something'' is.

Similar Messages

  • I have a Sony radio in my car.   With IOS  4 on my IPhone I could use the docking plug to the usb input on the radio and stream ESPN radio or pandora to the radio.  After upgrading to IOS 5 on the phone the Sony radio will not recognize the phone .  Any t

    I have a Sony radio in my car.   With IOS  4 on my IPhone I could use the docking plug to the usb input on the radio and stream ESPN radio or pandora to the radio.  After upgrading to IOS 5 on the phone the Sony radio will not recognize the phone .  Any thoughts.

    I am reading on this site about the error I am getting and it wants me to change some files that I am not comfortable messing with. Mainly because it is like a foreign language. Will the store do this for me or tell me if it is neccessary?

  • This mini is operating OSX 10.6.8 and trying to update to Mountain Lion but upgrade stops and a black overscreen displays saying to power off and power on.  The upgrade fails.  What's the problem?

    This mini is operating OSX 10.6.8 and trying to update to Mountain Lion but upgrade stops and a black overscreen displays saying to power off and power on.  The upgrade fails.  What's the problem?

    Hi Fred,
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

  • The Elements 12 Mac disk works fin - I also have a Dell, and the Windows disk will not run at all, sounds like it's grinding, and is almost impossible to remove from the hard drive.  I cannot find any place to tell me who to CALL to ask for a replacement!

    The Elements 12 Mac disk works fine - I also have a Dell, and the Windows disk will not run at all, sounds like it's grinding, and is almost impossible to remove from the hard drive.  I cannot find any place to tell me who to CALL to ask for a replacement!

    Hi Samcat,
    You can use a download instead of the disk as an alternative: Adobe - Download free trial version Adobe Photoshop Elements 12 | Adobe you can license with your serial
    Please test the disk in another windows machine to check if it's caused by the drive or the disk. If you tested with 2 drives please start a support case, i assume Adobe will only provide downloads at this point. They are the same as the trials. If you still need a disk you can burn the trial to a disk as a backup disk. Good luck!

  • I have a copy of Web Premium CS3 which was installed on a Windows Vista PC.  I have a new Windows 7 PC and the installation disc will not run properly.  The installation begins and then asks for the CS3 disc to be inserted.  If I re-insert the CD I just g

    I have a copy of Web Premium CS3 which was installed on a Windows Vista PC.  I have a new Windows 7 PC and the installation disc will not run properly.  The installation begins and then asks for the CS3 disc to be inserted.  If I re-insert the CD I just get a message asking for the disc to be inserted.  any ideas anyone?

    Use the download version:
    Download CS3 products
    Mylenium

  • I have itunes version 8.2 and would like to avoid downloading a newer version. The iTunes Store will not leave the page for iTunes 10. How do I fix this?

    The iTunes store will not leave the page for downloading iTunes 10. I just deleted iTunes 10 because of errors to purposely go back to version 8.2. Now I would like to keep 8.2 and not upgrade. How do I get this page to go away, or just keep 8.2? I would like to only have a version before 9.0. Please help!

    The iTunes store will not leave the page for downloading iTunes 10. I just deleted iTunes 10 because of errors to purposely go back to version 8.2. Now I would like to keep 8.2 and not upgrade. How do I get this page to go away, or just keep 8.2? I would like to only have a version before 9.0. Please help!

  • Question: is it possible to recover an InDesign file that will not open. the problem came by copying a pictogram vector illustrator to indesign. My file indesign does not want to open it now. Thank you

    Question: is it possible to recover an InDesign file that will not open. the problem came by copying a pictogram vector illustrator to indesign. My file indesign does not want to open it now. Thank you

    You can try the script mentioned in #1 here: Re: InDesign 6 is crashing when attempting to open a particular document. All others are opening OK.
    Here's how to install a script: http://indesignsecrets.com/how-to-install-a-script-in-indesign-that-you-found-in-a-forum-o r-blog-post.php

  • Double-click in Files panel will not open a file

    Double-click in Files panel will not open a file. Instead
    alert message appears (I will translate from Czech): "Design notes
    are not allowed for this file. If you want to use Design notes...".
    I do not want use Design notes, I want to open a file from File
    Panel.
    The same issue is when opening by right-click/Open. The only
    (and unconfortable) way to open a file from Files panel is to
    right-click/Open in program/Dreamweaver, this works.
    Do you know why? help me, please, this disturbs me very much.
    I have clean installation of up to date CS3 Design Premium
    (Version 9.0 build 41) on WinXP SP2. Previous version of DW (v8)
    worked fine in this way. Associations in system are set OK, I
    think, because double-clicking in my file manager really opens for
    examle PHP files in DW.

    Also Drag & Drop from Files panel is not functioning.
    Sometimes neither alert appears, simply nothing happen.
    Note: I am trying usual files like PHP or HTML files, but
    also others (PDF, CSS) with the same result - nothing
    happens.

  • HT3669 My Epson Perfection 1200 scanner functions as a flatbed scanner but when I try to scan transparencies the control panels change in  Image Capture but the scanner bar will not complete the overview scan  & cannot travel beyond the first 2/3 centimet

    Epson Perfection 1200 scanner continues to function as a flatbed scanner but when I try to scan transparencies/film negs the control panels change in  Image Capture but the scanner bar will not complete the overview scan  & cannot travel beyond the first 2/3 centimeters. All the communications seem to recognise the scanner and the mode for the intended scan but the necessary overview scan is not completed, nothing comes up on the Image Capture scan window. If I unplug the film adaptor I can get a document scan. When I plug in the adaptor again the Image Capture details change which allows me to select the type of scan required but when the scanner attempts an overview scan it is unable to complete it.
    I have had the scanner from new (12 Years) and have previously scanned slides and film with the adaptor but maybe this was before I upgraded my computer (imac 27").
    Do I have to buy a new scanner?  It seems so close to working correctly. 
    I have downloaded the Epson recommended driver (5.4) and have Epson Perfection 1200 6.6 Universal showing in the Applications List.
    Any thoughts or observations would be much appreciated before I go out and spend money an new hardware.
    Thanks

    I have same issue - have you solved this yet?

  • I was trying to update sofwatare for my iphone 4s, i got stuck with recovery mode and only option i see is to restore from factory setting. Do i lose all the the datas ? i did't had any backup. What is a solution?

    I was trying to update sofwatare for my iphone 4s, i got stuck with recovery mode and only option i see is to restore from factory setting. Do i lose all the the datas ? i did't had any backup. What is a solution?

    If you didn't back it up, your data is gone. There is no "solution" after the fact.

  • There is a 3 inch section of the window that will not recognize the mouse. It will not let you click on the icons or screen in any way in this section under the address bar. It is only in firefox where this is a problem

    There is a 3 inch section of the window that will not respond or recognize the mouse. It will not let you click on the icons or screen in any way. This is the only program we are experiencing this problem with.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • In trying to download Firefox 4.0, it "paused" at 37% of the way and will not finish the download. Why?

    I could not open NY Times articles today because Firefox would not let me. I reported this twice. I received a window telling me to update Firefox ~~ and I'm trying to do this. As I said, Firefox download4.0.dmg paused and will not finish the download. It's been over 10 minutes and I don't know how to proceed.

    You see the orange (on Linux gray) Firefox button if the Menu Bar is hidden, so you need to hide the Menu bar to get the new appearance.<br />
    If you need to access the hidden Menu bar then press F10 or hold down the Alt key to make the Menu Bar appear temporarily.<br />
    You can place the Tab Bar on top.
    * View > Toolbars : [ ] Menu Bar
    * View > Toolbars : [X] Tabs on Top

  • I want to delete photos from my ipad but the delete button will not accept the touch

    How do I delete photos from my ipad the delete button will not work although the share button does?

    The photo must be open to be able to, "delete".

  • Im running windows 7 64 bit. installed itunes 10.5.4.1 and now cds will not import or play. If i have the cd in the drive and then open itunes it will importor play but after removed the next disc will not read. the system has passed the cd/dvd test.

    Cd import/play problem. Downloaded itunes 10.5.. Cd will play and import when disc is present when itunes is opened. If itunes is open cd will not import or play. Itunes passed the cd/dvd test.
    Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601) Dell Inc. Studio XPS 8100 iTunes 10.5.1.42 QuickTime not available FairPlay 1.13.36 Apple Application Support 2.1.5 iPod Updater Library 10.0d2 CD Driver 2.2.2.0 CD Driver DLL 2.1.3.0 Apple Mobile Device 4.0.0.97 Apple Mobile Device Driver 1.57.0.0 Bonjour 3.0.0.10 (333.10) Gracenote SDK 1.9.5.502 Gracenote MusicID 1.9.5.115 Gracenote Submit 1.9.5.143 Gracenote DSP 1.9.5.45 iTunes Serial Number 003AABF40351C940 Current user is an administrator. The current local date and time is 2011-12-01 17:19:39. iTunes is not running in safe mode. WebKit accelerated compositing is enabled. HDCP is supported. Core Media is supported. Video Display Information ATI Technologies Inc., ATI Radeon HD 5700 Series **** External Plug-ins Information **** No external plug-ins installed. iPodService 10.5.1.42 (x64) is currently running. iTunesHelper 10.5.1.42 is currently running. Apple Mobile Device service 3.3.0.0 is currently running. **** CD/DVD Drive Tests **** LowerFilters: PxHlpa64 (2.0.0.0), UpperFilters: GEARAspiWDM (2.2.2.0), D: HL-DT-ST DVD+-RW GH50N, Rev B103 Audio CD in drive. Found 16 songs on CD, playing time 72:03 on Audio CD. Track 1, start time 00:02:00 Track 2, start time 04:58:07 Track 3, start time 11:45:30 Track 4, start time 16:27:57 Track 5, start time 21:35:15 Track 6, start time 27:59:00 Track 7, start time 31:22:40 Track 8, start time 36:52:12 Track 9, start time 40:32:40 Track 10, start time 44:19:40 Track 11, start time 48:30:60 Track 12, start time 51:37:72 Track 13, start time 56:13:50 Track 14, start time 58:24:10 Track 15, start time 63:10:50 Track 16, start time 68:05:00 Audio CD reading succeeded. Get drive speed succeeded. The drive CDR speeds are:  4 8 16 24 32 40 48. The drive CDRW speeds are:  4. The drive DVDR speeds are:  4. The drive DVDRW speeds are:  4. Writing CD text is turned on in the preferences. If you’re having problems burning CDs, try turning this preference off
    I ve tried completely removing itunes and reinstalling. also unchecked autocorrect and find art and track names which did not work as well. Any ideas of how to fix this?

    Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601) Dell Inc. Studio XPS 8100 iTunes 10.5.1.42 QuickTime not available FairPlay 1.13.36 Apple Application Support 2.1.5 iPod Updater Library 10.0d2 CD Driver 2.2.2.0 CD Driver DLL 2.1.3.0 Apple Mobile Device 4.0.0.97 Apple Mobile Device Driver 1.57.0.0 Bonjour 3.0.0.10 (333.10) Gracenote SDK 1.9.5.502 Gracenote MusicID 1.9.5.115 Gracenote Submit 1.9.5.143 Gracenote DSP 1.9.5.45 iTunes Serial Number 001CA97403888A88 Current user is not an administrator. The current local date and time is 2011-12-03 16:12:39. iTunes is not running in safe mode. WebKit accelerated compositing is enabled. HDCP is supported. Core Media is supported. Video Display Information ATI Technologies Inc., ATI Radeon HD 5700 Series **** External Plug-ins Information **** No external plug-ins installed. iPodService 10.5.1.42 (x64) is currently running. iTunesHelper 10.5.1.42 is currently running. Apple Mobile Device service 3.3.0.0 is currently running. **** CD/DVD Drive Tests **** LowerFilters: PxHlpa64 (2.0.0.0), UpperFilters: GEARAspiWDM (2.2.2.0), D: HL-DT-ST DVD+-RW GH50N, Rev B103 Audio CD in drive. Found 19 songs on CD, playing time 68:17 on CDROM-XA media. Track 1, start time 00:02:00 Track 2, start time 02:36:15 Track 3, start time 05:52:55 Track 4, start time 08:48:37 Track 5, start time 11:50:00 Track 6, start time 16:08:30 Track 7, start time 19:21:52 Track 8, start time 23:31:17 Track 9, start time 28:27:45 Track 10, start time 32:05:00 Track 11, start time 35:40:32 Track 12, start time 39:10:30 Track 13, start time 43:50:25 Track 14, start time 47:11:10 Track 15, start time 50:32:47 Track 16, start time 56:31:25 Track 17, start time 60:03:10 Track 18, start time 62:37:37 Track 19, start time 64:55:62 Audio CD reading succeeded. Get drive speed succeeded. The drive CDR speeds are:  4 8 16 24 32 40 48. The drive CDRW speeds are:  4. The drive DVDR speeds are:  4. The drive DVDRW speeds are:  4. Writing CD text is turned on in the preferences. If you’re having problems burning CDs, try turning this preference off. Just turned pc on this is my test. Also dell has included a temp read in the dell support center. temp is 30 right now. Also listed was  the max temp. in the pcs lifetime as 43.

  • My "Home" is a GIF file on my C: drive, but the Home button will not display the file anymore.

    I am now on Firefox 6.0.2. Prior to this upgrade when I clicked the Home button I would see a GIF file from my hard drive displayed. This is how it was coded in my Options:
    file:///C|/$USER/OTHER/BITMAPS/THINK.GIF
    This file is also a Bookmark of mine and clicking that entry in the Bookmark bar works perfectly fine.
    But now in 6.0.2 when I click Home it opens a new tab and then I get an error message saying:
    Server not found.
    Firefox can't find the server at www.$user.com.
    and in the address bar it says:
    http://www.$user.com/OTHER/BITMAPS/THINK.GIF
    So my question is, why is it changing the "file:" specification to an invalid "http:" specification?

    Thank you for the clue which solved the problem! I changed the "C|" to "C:" and it now works. But I am still mystified about what changed because my Home page has been set to file:///C|/$USER/OTHER/BITMAPS/THINK.GIF since my Netscape days, and like I said, it worked fine with the previous versions of Firefox, it only broke when I went to V6.0.2. The other mysterious thing is that my bookmark with the "|" instead of the ":" still works just fine, it only was broken with Home button, nowhere else. But now it works so I'm happy, thanks again.

Maybe you are looking for